Download or read book An experimental investigation of paraffin wax deposition in a batch oscillatory baffled column written by Lukman Ismail and published by . This book was released on 2007 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wax Deposition written by Zhenyu Huang and published by CRC Press. This book was released on 2016-03-09 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wax Deposition: Experimental Characterizations, Theoretical Modeling, and Field Practices covers the entire spectrum of knowledge on wax deposition. The book delivers a detailed description of the thermodynamic and transport theories for wax deposition modeling as well as a comprehensive review of laboratory testing for the establishment of appropr
Download or read book Index to Theses with Abstracts Accepted for Higher Degrees by the Universities of Great Britain and Ireland and the Council for National Academic Awards written by and published by . This book was released on 2008 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimental Investigation of Wax Deposition in Polyethylene Pipe written by Xiangrui Zhu and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Wax deposition is an intrinsic problem existing in the production and transportation of waxy crude oil. In the oilfield, non-metallic pipe especially polyethylene pipe has been widely used to solve corrosion problems. However, few experimental studies focused on wax deposition in polyethylene pipes in recent decades. In the present research, a series of polyethylene (PE) and stainless steel (SS) flow-loop experiments with waxy crude oil were performed to investigate the variation of wax deposit thickness under the laminar flow regime. Unlike the SS pipe, it was found that the deposit layer was not formed in the first few hours for PE pipe. The effects of surface roughness and free energy were analyzed and employed to elucidate the deposition delay for PE pipe. Besides, the difference of heat transfer characteristics between the SS pipe and PE pipe also influences the formation of wax deposit layer. The comparisons and findings of wax deposition between the two kinds of pipes have provided a significant reference for the application of non-metallic pipe in the oilfield.
Download or read book Experimental and Modeling Studies of Wax Deposition in Crude Oil Carrying Pipelines written by Sandeep Todi and published by . This book was released on 2005 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aerosol Science and Technology written by David S. Ensor and published by RTI Press. This book was released on 2011-10-06 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerosol Science and Technology: History and Reviews captures an exciting slice of history in the evolution of aerosol science. It presents in-depth biographies of four leading international aerosol researchers and highlights pivotal research institutions in New York, Minnesota, and Austria. One collection of chapters reflects on the legacy of the Pasadena smog experiment, while another presents a fascinating overview of military applications and nuclear aerosols. Finally, prominent researchers offer detailed reviews of aerosol measurement, processes, experiments, and technology that changed the face of aerosol science. This volume is the third in a series and is supported by the American Association for Aerosol Research (AAAR) History Working Group, whose goal is to produce archival books from its symposiums on the history of aerosol science to ensure a lasting record. It is based on papers presented at the Third Aerosol History Symposium on September 8 and 9, 2006, in St. Paul, Minnesota, USA.
Download or read book Pharmaceutical Manufacturing Handbook written by Shayne Cox Gad and published by John Wiley & Sons. This book was released on 2008-03-21 with total page 1384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook features contributions from a team of expert authors representing the many disciplines within science, engineering, and technology that are involved in pharmaceutical manufacturing. They provide the information and tools you need to design, implement, operate, and troubleshoot a pharmaceutical manufacturing system. The editor, with more than thirty years' experience working with pharmaceutical and biotechnology companies, carefully reviewed all the chapters to ensure that each one is thorough, accurate, and clear.
Download or read book Utilization of the Southern Pines Processing written by Peter Koch and published by . This book was released on 1972 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aulton s Pharmaceutics written by Michael E. Aulton and published by Elsevier Health Sciences. This book was released on 2013 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Pharmaceutics is the art of pharmaceutical preparations. It encompasses design of drugs, their manufacture and the elimination of micro-organisms from the products. This book encompasses all of these areas."--Provided by publisher.
Download or read book Handbook of Petroleum Refining written by James G. Speight and published by CRC Press. This book was released on 2016-10-26 with total page 797 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum refining involves refining crude petroleum as well as producing raw materials for the petrochemical industry. This book covers current refinery processes and process-types that are likely to come on-stream during the next three to five decades. The book includes (1) comparisons of conventional feedstocks with heavy oil, tar sand bitumen, and bio-feedstocks; (2) properties and refinability of the various feedstocks; (3) thermal processes versus hydroprocesses; and (4) the influence of refining on the environment.
Download or read book Energetic Materials written by Ulrich Teipel and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: Incorporation of particular components with specialized properties allows one to tailor the end product's properties. For instance, the sensitivity, burning behavior, thermal or mechanical properties or stability of energetic materials can be affected and even controllably varied through incorporation of such ingredients. This book examines particle technologies as applied to energetic materials such as propellants and explosives, thus filling a void in the literature on this subject. Following an introduction covering general features of energetic materials, the first section of this book describes methods of manufacturing particulate energetic materials, including size reduction, crystallization, atomization, particle formation using supercritical fluids and microencapsulation, agglomeration phenomena, special considerations in mixing explosive particles and the production of nanoparticles. The second section discusses the characterization of particulate materials. Techniques and methods such as particle size analysis, morphology elucidation and the determination of chemical and thermal properties are presented. The wettability of powders and rheological behavior of suspensions and solids are also considered. Furthermore, methods of determining the performance of particular energetic materials are described. Each chapter deals with fundamentals and application possibilities of the various methods presented, with particular emphasis on issues applicable to particulate energetic materials. The book is thus equally relevant for chemists, physicists, material scientists, chemical and mechanical engineers and anyone interested or engaged in particle processing and characterization technologies.
Download or read book Handbook of Formulating Dermal Applications written by Nava Dayan and published by John Wiley & Sons. This book was released on 2016-12-07 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: The conceptualization and formulation of skin care products intended for topical use is a multifaceted and evolving area of science. Formulators must account for myriad skin types, emerging opportunities for product development as well as a very temperamental retail market. Originally published as "Apply Topically" in 2013 (now out of print), this reissued detailed and comprehensive handbook offers a practical approach to the formulation chemist's day-to-day endeavors by: Addressing the innumerable challenges facing the chemist both in design and at the bench, such as formulating with/for specific properties; formulation, processing and production techniques; sensory and elegancy; stability and preservation; color cosmetics; sunscreens; Offering valuable guidance to troubleshooting issues regarding ingredient selection and interaction, regulatory concerns that must be addressed early in development, and the extrapolation of preservative systems, fragrances, stability and texture aids; Exploring the advantages and limitations of raw materials; Addressing scale-up and pilot production process and concerns; Testing and Measurements Methods. The 22 chapters written by industry experts such as Roger L. McMullen, Paul Thau, Hemi Nae, Ada Polla, Howard Epstein, Joseph Albanese, Mark Chandler, Steve Herman, Gary Kelm, Patricia Aikens, and Sam Shefer, along with many others, give the reader and user the ultimate handbook on topical product development.
Download or read book Vacuum Deposition onto Webs Films and Foils written by Charles Bishop and published by William Andrew. This book was released on 2015-08-15 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vacuum Deposition onto Webs: Films and Foils, Third Edition, provides the latest information on vacuum deposition, the technology that applies an even coating to a flexible material that can be held on a roll, thereby offering a much faster and cheaper method of bulk coating than deposition onto single pieces or non-flexible surfaces such as glass. This technology has been used in industrial-scale applications for some time, including a wide range of metalized packaging. Its potential as a high-speed, scalable process has seen an increasing range of new products emerging that employ this cost-effective technology, including solar energy products that are moving from rigid panels onto cheaper and more versatile flexible substrates, flexible electronic circuit 'boards', and flexible displays. In this third edition, all chapters are thoroughly revised with a significant amount of new information added, including newly developed barrier measurement techniques, improved in-vacuum monitoring technologies, and the latest developments in Atomic Layer Deposition (ALD). - Provides the know-how to maximize productivity of vacuum coating systems - Thoroughly revised with a significant amount of new information added, including newly developed barrier measurement techniques, improved in-vacuum monitoring technologies, and the latest on Atomic Layer Deposition (ALD) - Presents the latest information on vacuum deposition, the technology that applies an even coating to a flexible material that can be held on a roll, thereby offering a much faster and cheaper method of bulk coating - Enables engineers to specify systems more effectively and enhances dialogue between non-specialists and suppliers/engineers - Empowers those in rapidly expanding fields such as solar energy, display panels, and flexible electronics to unlock the potential of vacuum coating to transform their processes and products
Download or read book Particle Size Measurement written by Terence Allen and published by Springer Science & Business Media. This book was released on 1996-12-31 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the fifth edition of the highly successful work first published in 1968, comprising two definitive volumes on particle characterisation. The first volume is devoted to sampling and particle size measurement, while surface area and pore size determination are reviewed in volume 2. Particle size and characterisation are central to understanding powder properties and behaviour. This book describes numerous potential measuring devices, how they operate and their advantages and disadvantages. It comprise a fully comprehensive treatise on the wide range of available equipment with an extensive literature survey, and a list of manufacturers and suppliers. The author's blend of academic and industrial experience results in a readable technical book with information on how to analyse, present, and extract useful information from data. This is an essential reference book for both industrial and academic research workers in a variety of areas including: pharmaceuticals, food science, pollution analysis and control, electronic materials, agricultural products, polymers, pigments and chemicals.
Download or read book Chemistry and Technology of Lubricants written by Roy M. Mortier and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of lubricants began in ancient times and has developed into a major international business through the need to lubricate machines of increasing complexity. The impetus for lubricant development has arisen from need, so lubricating practice has preceded an understanding of the scientific principles. This is not surprising as the scientific basis of the technology is, by nature, highly complex and interdisciplinary. However, we believe that the understanding of lubricant phenomena will continue to be developed at a molecular level to meet future challenges. These challenges will include the control of emissions from internal combustion engines, the reduction of friction and wear in and continuing improvements to lubricant performance and machinery, life-time. More recently, there has been an increased understanding of the chemical aspects of lubrication, which has complemented the knowledge and understanding gained through studies dealing with physics and engineering. This book aims to bring together this chemical information and present it in a practical way. It is written by chemists who are authorities in the various specialisations within the lubricating industry, and is intended to be of interest to chemists who may already be working in the lubricating industry or in academia, and who are seeking a chemist's view of lubrication. It will also be of benefit to engineers and technologists familiar with the industry who require a more fundamental understanding of lubricants.
Download or read book Petroleum Production Engineering written by Boyun Guo and published by Gulf Professional Publishing. This book was released on 2017-02-10 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum Production Engineering, Second Edition, updates both the new and veteran engineer on how to employ day-to-day production fundamentals to solve real-world challenges with modern technology. Enhanced to include equations and references with today's more complex systems, such as working with horizontal wells, workovers, and an entire new section of chapters dedicated to flow assurance, this go-to reference remains the most all-inclusive source for answering all upstream and midstream production issues. Completely updated with five sections covering the entire production spectrum, including well productivity, equipment and facilities, well stimulation and workover, artificial lift methods, and flow assurance, this updated edition continues to deliver the most practical applied production techniques, answers, and methods for today's production engineer and manager. In addition, updated Excel spreadsheets that cover the most critical production equations from the book are included for download. - Updated to cover today's critical production challenges, such as flow assurance, horizontal and multi-lateral wells, and workovers - Guides users from theory to practical application with the help of over 50 online Excel spreadsheets that contain basic production equations, such as gas lift potential, multilateral gas well deliverability, and production forecasting - Delivers an all-inclusive product with real-world answers for training or quick look up solutions for the entire petroleum production spectrum
Download or read book Geomorphological Techniques written by Andrew Goudie and published by Routledge. This book was released on 2003-09-02 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: The specialist contributors to Geomorphological Techniques have thoroughly augmented and updated their original, authoritative coverage with critical evaluations of major recent developments in this field. A new chapter on neotectonics reflects the impact of developments in tectonic theory, and heavily revised sections deal with advances in remote sensing, image analysis, radiometric dating, geomorphometry, data loggers, radioactive tracers, and the determination of pore water pressure and the rates of denudation.
