Download or read book An Evaluation of High Energy Ion Implantation for Wear Studies written by Todd L. Rachel and published by . This book was released on 1991 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ion Implantation written by Ishaq Ahmad and published by BoD – Books on Demand. This book was released on 2017-06-14 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ion implantation is one of the promising areas of sciences and technologies. It has been observed as a continuously evolving technology. In this book, there is a detailed overview of the recent ion implantation research and innovation along with the existing ion implantation technological issues especially in microelectronics. The book also reviews the basic knowledge of the radiation-induced defects production during the ion implantation in case of a semiconductor structure for fabrication and development of the required perfect microelectronic devices. The improvement of the biocompatibility of biomaterials by ion implantation, which is a hot research topic, has been summarized in the book as well. Moreover, advanced materials characterization techniques are also covered in this book to evaluate the ion implantation impact on the materials.
Download or read book Evaluation of a Low Energy Ion Implantation System written by Donald D. Talada and published by . This book was released on 1974 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt: A machine which was originally designed as a sputtering apparatus and redesigned for use as an ion implantation system, was modified, and used to implant N(+) into p-type silicon at low energy (24 keV). Electrical characteristics of the resulting implanted layer were determined by Hall effect measurements using the van der Pauw technique. A second implantation of N(+) into p-type silicon was done at higher energy (145 keV) using the system at the Aerospace Research Laboratories. The electrical characteristics of the resulting implanted layer, determined by conventional Hall effect measurements, were found to be comparable to those of the low energy implant. In addition, the possibility of using the low energy machine to implant boron and phosphorus was investigated. (Modified author abstract).
Download or read book Ion Implantation Basics to Device Fabrication written by Emanuele Rimini and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ion implantation offers one of the best examples of a topic that starting from the basic research level has reached the high technology level within the framework of microelectronics. As the major or the unique procedure to selectively dope semiconductor materials for device fabrication, ion implantation takes advantage of the tremendous development of microelectronics and it evolves in a multidisciplinary frame. Physicists, chemists, materials sci entists, processing, device production, device design and ion beam engineers are all involved in this subject. The present monography deals with several aspects of ion implantation. The first chapter covers basic information on the physics of devices together with a brief description of the main trends in the field. The second chapter is devoted to ion im planters, including also high energy apparatus and a description of wafer charging and contaminants. Yield is a quite relevant is sue in the industrial surrounding and must be also discussed in the academic ambient. The slowing down of ions is treated in the third chapter both analytically and by numerical simulation meth ods. Channeling implants are described in some details in view of their relevance at the zero degree implants and of the available industrial parallel beam systems. Damage and its annealing are the key processes in ion implantation. Chapter four and five are dedicated to this extremely important subject.
Download or read book High Energy and High Dose Ion Implantation written by S.U. Campisano and published by Elsevier. This book was released on 1992-06-16 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ion beam processing is a means of producing both novel materials and structures. The contributions in this volume strongly focus on this aspect and include many papers reporting on the modification of the electrical and structural properties of the target materials, both metals and semiconductors, as well as the synthesis of buried and surface compound layers. Many examples on the applications of high energy and high dose ion implantation are also given. All of the papers from Symposia C and D are presented in this single volume because the interests of many of the participants span both topics. Additionally many of the materials science aspects, including experimental methods, equipment and processing problems, diagnostic and analytical techniques are common to both symposia.
Download or read book Evaluation of a Low Energy Ion Implantation System written by Donald DeForrest Talada (2LT, USAF.) and published by . This book was released on 1974 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ion Implantation in Semiconductors written by Susumu Namba and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technique of ion implantation has become a very useful and stable technique in the field of semiconductor device fabrication. This use of ion implantation is being adopted by industry. Another important application is the fundamental study of the physical properties of materials. The First Conference on Ion Implantation in Semiconductors was held at Thousand Oaks, California in 1970. The second conference in this series was held at Garmish-Partenkirchen, Germany, in 1971. At the third conference, which convened at Yorktown Heights, New York in 1973, the emphasis was broadened to include metals and insulators as well as semiconductors. This scope of the conference was still accepted at the fourth conference which was held at Osaka, Japan, in 1974. A huge number of papers had been submitted to this conference. All papers which were presented at the Fourth International Conference on Ion Implantation in Semiconductors and Other Materials are included in this proceedings. The success of this conference was due to technical presentations and discussions of 224 participants from 14 countries as well as to financial support from many companies in Japan. On behalf of the committee, I wish to thank the authors for their excellent papers and the sponsors for their financial support. The International Committee responsible for advising this conference consisted of B.L. Crowder, J.A. Davies, G. Dearna1ey, F.H. Eisen, Ph. G1otin, T. Itoh, A.U. MacRae, J.W. Mayer, S. Namba, I. Ruge, and F.L. Vook.
Download or read book Ion Implantation Science and Technology written by J.F. Ziegler and published by Elsevier. This book was released on 2012-12-02 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ion Implantation: Science and Technology serves as both an introduction to and tutorial on the science, techniques, and machines involved in ion implantation. The book is divided into two parts. Part 1 discusses topics such as the history of the ion implantation; the different types and purposes of ion implanters; the penetration of energetic ions into solids; damage annealing in silicon; and ion implantation metallurgy. Part 2 covers areas such as ion implementation system concepts; ion sources; underlying principles related to ion optics; and safety and radiation considerations in ion implantation. The text is recommended for engineers who would like to be acquainted with the principles and processes behind ion implantation or make studies on the field.
Download or read book Ion Implantation and Synthesis of Materials written by Michael Nastasi and published by Springer Science & Business Media. This book was released on 2007-05-16 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ion implantation is one of the key processing steps in silicon integrated circuit technology. Some integrated circuits require up to 17 implantation steps and circuits are seldom processed with less than 10 implantation steps. Controlled doping at controlled depths is an essential feature of implantation. Ion beam processing can also be used to improve corrosion resistance, to harden surfaces, to reduce wear and, in general, to improve materials properties. This book presents the physics and materials science of ion implantation and ion beam modification of materials. It covers ion-solid interactions used to predict ion ranges, ion straggling and lattice disorder. Also treated are shallow-junction formation and slicing silicon with hydrogen ion beams. Topics important for materials modification, such as ion-beam mixing, stresses, and sputtering, are also described.
Download or read book Ion Implantation written by Geoffrey Dearnaley and published by North-Holland. This book was released on 1973 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Energy and High Dose Ion Implantation written by S. U. Campisano and published by North Holland. This book was released on 1992-01-01 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ion beam processing is a means of producing both novel materials and structures. The contributions in this volume strongly focus on this aspect and include many papers reporting on the modification of the electrical and structural properties of the target materials, both metals and semiconductors, as well as the synthesis of buried and surface compound layers. Many examples on the applications of high energy and high dose ion implantation are also given. All of the papers from Symposia C and D are presented in this single volume because the interests of many of the participants span both topics. Additionally many of the materials science aspects, including experimental methods, equipment and processing problems, diagnostic and analytical techniques are common to both symposia.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Ion Implantation Range and Energy Deposition Distributions written by K. Bruce Winterbon and published by Springer. This book was released on 1975-09-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present level of understanding of ion implantation is sufficient that implantation Ls being used not only as a tool in various fields of research, but also as an industrial )rocess. In these applications one uses either the implanted ions, or their energy, to nodify some properties of the target substance, and is therefore concerned with the spatial listribution of the ions or of their energy. Following the pioneering work of Bohr [1), ~indhard and his collaborators have evolved a general description of the behaviour of swift Lons slowing down in amorphous targets [2,3,4), a description which has been the basis of nuch other work in the field. Various approximate calculations have been based on this :heory, but it has not always been clear whether any disagreement between experiment and :heory is real or can be attributed to deficiencies in calculation. It is the purpose of :his volume to present the results of the Lindhard theory, calculated in an exact manner, :o serve as a guide to the users of implantation, as a tabulation of theoretical results for experimentalists to compare with, and as a statement of the theoretical results either ~s a standard for comparison for approximate calculations or as a starting point for a more ietailed theory. Results are presented in tables and in graphs, the graphs being intended to display the qualitative features so as to illustrate the competition of the various phy sical processes determining the spatial distribution of the collision cascade.
Download or read book An Evaluation of the Parameters Involved in Developing a Radiotracer Based Wear Diagnostics System written by Dick A. Barkman and published by . This book was released on 1992 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ion Implantation Technology 94 written by S. Coffa and published by Newnes. This book was released on 1995-05-16 with total page 1031 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of these proceedings is to present and stimulate discussion on the many subjects related to ion implantation among a broad mix of specialists from areas as diverse as materials science, device production and advanced ion implanters.The contents open with a paper on the future developments of the microelectronics industry in Europe within the framework of the global competition. The subsequent invited and oral presentations cover in detail the following areas: trends in processing and devices, ion-solid interaction, materials science issues, advanced implanter systms, process control and yield, future trends and applications.
Download or read book Ion Implantation in Semiconductors and Other Materials written by Billy Crowder and published by Springer Science & Business Media. This book was released on 2013-03-13 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the years since the first conference in this series was held at Thousand Oaks, California, in 1970, ion implantation has been an expanding and exciting research area. The advances in this field were so rapid that a second conference convened at Garmisch Partenkirchen, Germany, in 1971. At the present time, our under standing of the ion implantation process in semiconductors such as Si and Ge has reached a stage of maturity and ion implantation techniques are firmly established in semiconductor device technology. The advances in compound semiconductors have not been as rapid. There has also been a shift in emphasis in ion implanta tion research from semiconductors to other materials such as metals and insulators. It was appropriate to increase the scope of the conference and the IIIrd International Conference on Ion Implanta tion in Semiconductors and Other Materials was held at Yorktown Heights, New York, December 11 to 14, 1972. A significant number of the papers presented at this conference dealt with ion implanta tion in metals, insulators, and compound semiconductors. The International Committee responsible for organizing this conference consisted of B. L. Crowder, J. A. Davies, F. H. Eisen, Ph. Glotin, T. Itoh, A. U. MacRae, J. W. Mayer, G. Dearnaley, and I. Ruge. The Conference attracted 180 participants from twelve countries. The success of the Conference was due in large measure to the financial support of our sponsors, Air Force Cambridge Research Laboratories and the Office of Naval Research.
Download or read book Ion Implantation Techniques written by H. Ryssel and published by Springer. This book was released on 1982-09 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, ion implantation has developed into the major doping technique for integrated circuits. Several series of conferences have dealt with the application of ion implantation to semiconductors and other materials (Thousand Oaks 1970, Garmisch-Partenkirchen 1971, Osaka 1974, Warwick 1975, Boulder 1976, Budapest 1978, and Albany 1980). Another series of conferences was devoted more to implantation equipment and tech niques (Salford 1977, Trento 1978, and Kingston 1980). In connection with the Third International Conference on Ion Implantation: Equipment and Tech niques, held at Queen's University,' Kingston, Ontario, Canada, July 8-11, 1980, a two-day instructional program was organized parallel to an implan tation conference for the first time. This implantation school concentra ted on aspects of implantation-equipment design. This book contains all lectures presented at the International Ion Implantation School organized in connection with the Fourth International Conference on Ion Implantation: Equipment and Techniques, held at the Convention Center, Berchtesgaden, Germany, September 13-17, 1982. In con trast to the first .school, the main emphasis in thiS school was placed on practical aspects of implanter operation and application. In three chap ters, various machine aspects of ion implantation (general concepts, ion sources, safety, calibration, dOSimetry), range distributions (stopping power, range profiles), and measuring techniques (electrical and nonelec tri ca 1 measu ri ng techni ques, annea 1 i ng) are di scussed. In the appendi x, a review of the state of the art in modern implantation equipment is given.
