Download or read book AN ENERGETIC APPROACH TO FATIGUE FAILURE written by William P. Dunn and published by . This book was released on 1970 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Isothermal and adiabatic analyses have been made for both stress and strain controlled 'push-pull' axial fatigue tests. An energy criteria, postulated for fatigue failure, yields favorable comparisons between the results of analysis and experimentation; without the use of any posteriori fatigue data parameters being incorporated into the analysis. The approach of these analyses is then used to compute fatigue failure due to cumulative damage. Again, comparability between analytic and experimental results proves encouraging. Also, the conditions under which Miner's 'law' can be used for the computation of cumulative damage fatigue failure are explicitly set forth. As a result of the success of the above analyses, a generalized theory of fatigue failure is developed. Several problems are then analyzed using the general theory and the solutions compared to experimental results. This last set of studies ostensibly delineate several problem areas that will be encountered in future fatigue work; as well as problems that must be resolved before attempting more intricate fatigue analyses. (Author).

Download or read book The Psychology of Fatigue written by Robert Hockey and published by Cambridge University Press. This book was released on 2013-05-16 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue can have a major impact on an individual's performance and well-being, yet is poorly understood, even within the scientific community. There is no developed theory of its origins or functions, and different types of fatigue (mental, physical, sleepiness) are routinely confused. The widespread interpretation of fatigue as a negative consequence of work may be true only for externally imposed goals; meaningful or self-initiated work is rarely tiring and often invigorating. In the first book dedicated to the systematic treatment of fatigue for over sixty years, Robert Hockey examines its many aspects - social history, neuroscience, energetics, exercise physiology, sleep and clinical implications - and develops a new motivational control theory, in which fatigue is treated as an emotion having a fundamental adaptive role in the management of goals. He then uses this new perspective to explore the role of fatigue in relation to individual motivation, working life and well-being.

Download or read book Frattura ed Integrit Strutturale Annals 2014 written by Luca Susmel and published by Gruppo Italiano Frattura. This book was released on 2014-09-12 with total page 1208 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 7th RILEM International Conference on Cracking in Pavements written by A. Scarpas and published by Springer Science & Business Media. This book was released on 2012-08-30 with total page 1340 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the recent past, new materials, laboratory and in-situ testing methods and construction techniques have been introduced. In addition, modern computational techniques such as the finite element method enable the utilization of sophisticated constitutive models for realistic model-based predictions of the response of pavements. The 7th RILEM International Conference on Cracking of Pavements provided an international forum for the exchange of ideas, information and knowledge amongst experts involved in computational analysis, material production, experimental characterization, design and construction of pavements. All submitted contributions were subjected to an exhaustive refereed peer review procedure by the Scientific Committee, the Editors and a large group of international experts in the topic. On the basis of their recommendations, 129 contributions which best suited the goals and the objectives of the Conference were chosen for presentation and inclusion in the Proceedings. The strong message that emanates from the accepted contributions is that, by accounting for the idiosyncrasies of the response of pavement engineering materials, modern sophisticated constitutive models in combination with new experimental material characterization and construction techniques provide a powerful arsenal for understanding and designing against the mechanisms and the processes causing cracking and pavement response deterioration. As such they enable the adoption of truly "mechanistic" design methodologies. The papers represent the following topics: Laboratory evaluation of asphalt concrete cracking potential; Pavement cracking detection; Field investigation of pavement cracking; Pavement cracking modeling response, crack analysis and damage prediction; Performance of concrete pavements and white toppings; Fatigue cracking and damage characterization of asphalt concrete; Evaluation of the effectiveness of asphalt concrete modification; Crack growth parameters and mechanisms; Evaluation, quantification and modeling of asphalt healing properties; Reinforcement and interlayer systems for crack mitigation; Thermal and low temperature cracking of pavements; and Cracking propensity of WMA and recycled asphalts.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Thermodynamics of Mechanical Fatigue written by Michael M. Khonsari and published by CRC Press. This book was released on 2012-09-17 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue is probabilistic in nature and involves a complex spectrum of loading history with variable amplitudes and frequencies. Yet most available fatigue failure prediction methods are empirical and concentrate on very specific types of loading. Taking a different approach, Introduction to Thermodynamics of Mechanical Fatigue examines the treatment of fatigue via the principles of thermodynamics. It starts from the premise that fatigue is a dissipative process and must obey the laws of thermodynamics. In general, it can be hypothesized that mechanical degradation is a consequence of irreversible thermodynamic processes. This suggests that entropy generation offers a natural measure of degradation. An Entropic Approach to Fatigue and Degradation Drawing on recent cutting-edge research and development, the authors present a unified entropic approach to problems involving fatigue. They introduce the fundamentals of fatigue processes and explore a wide range of practical engineering applications. Fundamental Concepts and Methodologies The book reviews commonly observed failure modes, discusses how to analyze fatigue problems, and examines the deformation characteristics of a solid material subjected to fatigue loading. It also looks at how to use thermodynamics to determine the onset of fatigue failure. In addition, the book presents methodologies for improving fatigue life and for accelerated fatigue testing. Learn How to Apply the Entropic Approach to Fatigue Problems Comprehensive and well organized, this work helps readers apply powerful thermodynamics concepts to effectively treat fatigue problems at the design stage. It offers an accessible introduction to a new and exciting area of research in the field of fatigue failure analysis.

Download or read book Entropy Based Fatigue Fracture Failure Prediction and Structural Health Monitoring written by Cemal Basaran and published by MDPI. This book was released on 2021-01-13 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally fatigue, fracture, damage mechanics are predictions are based on empirical curve fitting models based on experimental data. However, when entropy is used as the metric for degradation of the material, the modeling process becomes physics based rather than empirical modeling. Because, entropy generation in a material can be calculated from the fundamental equation of thematerial. This collection of manuscripts is about using entropy for "Fatigue, Fracture, Failure Prediction and Structural Health Monitoring". The theoretical paper in the collection provides the mathematical and physics framework behind the unified mechanics theory, which unifies universal laws of motion of Newton and laws of thermodynamics at ab-initio level. Unified Mechanics introduces an additional axis called, Thermodynamic State Index axis which is linearly independent from Newtonian space x, y, z and time. As a result, derivative of displacement with respect to entropy is not zero, in unified mechanics theory, as in Newtonian mechanics. Any material is treated as a thermodynamic system and fundamental equation of the material is derived. Fundamental equation defines entropy generation rate in the system. Experimental papers in the collection prove validity of using entropy as a stable metric for Fatigue, Fracture, Failure Prediction and Structural Health Monitoring.

Download or read book Fatigue Damage Crack Growth and Life Prediction written by F. Ellyin and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue failure is a multi-stage process. It begins with the initiation of cracks, and with continued cyclic loading the cracks propagate, finally leading to the rupture of a component or specimen. The demarcation between the above stages is not well-defined. Depending upon the scale of interest, the variation may span three orders of magnitude. For example, to a material scientist an initiated crack may be of the order of a micron, whereas for an engineer it can be of the order of a millimetre. It is not surprising therefore to see that investigation of the fatigue process has followed different paths depending upon the scale of phenomenon under investigation. Interest in the study of fatigue failure increased with the advent of industrial ization. Because of the urgent need to design against fatigue failure, early investiga tors focused on prototype testing and proposed failure criteria similar to design formulae. Thus, a methodology developed whereby the fatigue theories were proposed based on experimental observations, albeit at times with limited scope. This type of phenomenological approach progressed rapidly during the past four decades as closed-loop testing machines became available.

Download or read book Fatigue of Materials and Structures written by Claude Bathias and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of mechanical structures with predictable and improved durability cannot be achieved without a thorough understanding of the mechanisms of fatigue damage and more specifically the relationships between the microstructure of materials and their fatigue properties. Written by leading researchers in the field, this book, along with the complementary books Fatigue of Materials and Structures: Fundamentals and Application to Damage and Design (both also edited by Claude Bathias and André Pineau), provides an authoritative, comprehensive and unified treatment of the mechanics and micromechanisms of fatigue in metals, polymers and composites. Each chapter is devoted to one of the major classes of materials or to different types of fatigue damage, thereby providing overall coverage of the field. This book deals with multiaxial fatigue, thermomechanical fatigue, fretting-fatigue, influence of defects on fatigue life, cumulative damage and damage tolerance, and will be an important and much used reference for students, practicing engineers and researchers studying fracture and fatigue in numerous areas of materials science and engineering, mechanical, nuclear and aerospace engineering.

Download or read book Fracture Fatigue Failure and Damage Evolution Volume 8 written by Allison M. Beese and published by Springer. This book was released on 2015-11-07 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture, Fatigue, Failure and Damage Evolution, Volume 8 represents the eighth of nine volumes of technical papers presented at the Society for Experimental Mechanics (SEM) 15th International Congress & Exposition on Experimental and Applied Mechanics, held at Costa Mesa, California, June 8-11, 2015. The full set of proceedings also includes volumes on: Dynamic Behavior of Materials, Challenges in Mechanics of Time Dependent Materials, Advancement of Optical Methods in Experimental Mechanics, Experimental and Applied Mechanics, 16th International Symposium on MEMS and Nanotechnology, International Symposium on the Mechanics of Composite and Multi-functional Materials, 5th International Symposium on the Mechanics of Biological Systems and Materials, International Symposium on the Mechanics of Composite and Multi-functional Materials; and Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems.

Download or read book Biaxial Multiaxial Fatigue and Fracture written by Andrea Carpinteri and published by Elsevier. This book was released on 2003-03-19 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European Structural Integrity Society (ESIS) Technical Commitee on Fatigue of Engineering Materials and Structures (TC3) decided to compile a Special Technical Publication (ESIS STP) based on the 115 papers presented at the 6th International Conference on Biaxial/Multiaxial Fatigue and Fracture. The 25 papers included in the STP have been extended and revised by the authors. The conference was held in Lisbon, Portugal, on 25-28 June 2001, and was chaired by Manual De Freitas, Instituto Superior Tecnico, Lisbon. The meeting, organised by the Instituto Superior Tecnico and sponsored by the Portuguese Minesterio da Cienca e da Tecnologia and by the European Structural Integrity Society, was attended by 151 delegates from 20 countries. The papers in the present book deal with the theoretical, numerical and experimental aspects of the Multiaxial fatigue and fracture of engineering materials and structures. They are divided in to the following six sections; Multiaxial Fatigue of Welded Structures; High cycle Multiaxial fatigue; Non proportional and Variable-Amplitude loading; Defects, Notches, Crack Growth; Low Cycle Multiaxial Fatigue; Applications and Testing Methods. As is well-known, most engineering components and structures in the mechanical, aerospace, power generation, and other industries are subjected to multiaxial loading during their service life. One of the most difficult tasks in design against fatigue and fracture is to translate the information gathered from uniaxial fatigue and fracture tests on engineering materials into applications involving complex states of cyclic stress-strain conditions. This book is the result of co-operation between many researchers from different laboratories, universities and industries in a number of countries.

Download or read book Fatigue and Fracture Mechanics written by John H. Underwood and published by ASTM International. This book was released on 1997 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Automation in Fatigue and Fracture written by C. Amzallag and published by ASTM International. This book was released on 1994 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Engineering Forum written by Trans Tech Publications, Limited and published by Trans Tech Publications Ltd. This book was released on 2018-02-23 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 26th volume of the journal "Advanced Engineering Forum" contains peer-reviewed manuscripts describing the results of engineering solutions and research dealing with actual problems in the study of structural and functional materials, their behaviour and their processing technologies. Published articles will be useful for professionals in the field of materials development and application in the various branches of engineering and for students and academic staff concerned with the related specialties.

Download or read book Strengthening of Concrete Structures Using Fiber Reinforced Polymers FRP written by Hwai-Chung Wu and published by Woodhead Publishing. This book was released on 2017-02-21 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strengthening of Concrete Structures Using Fiber Reinforced Polymers (FRP): Design, Construction and Practical Applications presents a best practice guide on the structural design and strengthening of bridge structures using advanced Fiber Reinforced Polymer (FRP) composites. The book briefly covers the basic concepts of FRP materials and composite mechanics, while focusing on practical design and construction issues, including inspection and quality control, paying special attention to the differences in various design codes (US, Japan, and Europe) and recommendations. At present, several design guides from the US, Japan, and Europe are available. These guidelines are often inconsistent and do not cover all necessary design and inspection issues to the same degree of detail. This book provides a critical review and comparison of these guidelines, and then puts forward best practice recommendations, filling a significant gap in the literature, and serving as an important resource for engineers, architects, academics, and students interested in FRP materials and their structural applications. Written from a practitioner's point-of-view, it is a valuable design book for structural engineers all over the world. - Includes a large quantity of design examples and structural software to facilitate learning and help readers perform routine design - Provides recommendations for best practices in design and construction for the strengthening of bridge structures using advanced fiber-reinforced polymer (FRP) composites - Presents comprehensive guidelines on design, inspection, and quality control, including laboratory and field testing information

Download or read book Bituminous Mixtures and Pavements VI written by A. Nikolaides and published by CRC Press. This book was released on 2015-07-28 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bituminous Mixtures and Pavements contains 113 accepted papers from the 6th International ConferenceBituminous Mixtures and Pavements (6th ICONFBMP, Thessaloniki, Greece, 10-12 June 2015). The 6th ICONFBMP is organized every four years by the Highway Engineering Laboratory of the Aristotle University of Thessaloniki, Greece, in conjunction with

Download or read book Fatigue and Fracture Mechanics written by Tina Louise Panontin and published by ASTM International. This book was released on 1999 with total page 922 pages. Available in PDF, EPUB and Kindle. Book excerpt: