Download or read book An Approximate Jet Noise Prediction Method Based on Reynolds averaged Navier Stokes Computational Fluid Dynamics Simulation written by Craig Allen Hunter and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Prediction of Broadband Shock associated Noise Using Reynolds averaged Navier Stokes Solutions written by Steven Arthur Eric Miller and published by . This book was released on 2009 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Broadband shock-associated noise is a component of jet noise generated by supersonic jets operating off-design. It is characterized by multiple broadband peaks and dominates the total noise at large angles to the jet downstream axis. A new model is introduced for the prediction of broadband shock-associated noise that uses the solution of the Reynolds averaged Navier-Stokes equations. The noise model is an acoustic analogy based on the linearized Euler equations. The equivalent source terms depend on the product of the fluctuations associated with the shock cell structure and the turbulent velocity fluctuations in the jet shear layer. The former are deterministic and are obtained from the Reynolds averaged Navier-Stokes solution. A statistical model is introduced to describe the properties of the turbulence. Only the geometry and operating conditions of the nozzle need to be known to make noise predictions. Unlike other models, the developed broadband shock-associated noise model is a true prediction scheme and not calibrated for a finite range of operating conditions. The broadband shock-associated noise model developed represents the only prediction method in existence that has no restrictions on nozzle geometry or jet operating conditions. This overcomes the limitations and empiricism present in previous broadband shock-associated noise models. Extensive validation of the Reynolds averaged Navier-Stokes solution is performed using experimental data. Validation efforts of the Reynolds averaged Navier-Stokes solutions include comparisons of Pitot and static probe measurements and schlieren visualization. These validations show both the strengths and deficiencies for modeling strategies of supersonic jets operating off-design using Reynolds averaged Navier-Stokes equations and associated turbulence closure schemes. Predictions for various nozzle and operating conditions are compared with experimental noise measurements of the associated jets to validate the broadband shock-associated noise model. The operating conditions include under-expanded and over-expanded jets with and without heating.

Download or read book Contributions to Jet Noise Prediction and Characterisation by Means of Hybrid Acoustic Analogy Techniques written by and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: In Computational aeroacoustics, hybrid approaches first resolve the source and nearfield regions of the flow field by employing Reynolds Averaged Navier-Stokes (RANS) equations, Large Eddy Simulations (LES) or Direct Numerical Simulations (DNS). The source region data is used to form source terms, which are, in turn, applied to either empirical models or equations linearized around a mean flow. An acoustic analogy type of model is used to propagate the acoustics to the farfield regions. The aim of this research is two-fold: to introduce and test a hybrid acoustic analogy, based on a coupling between the Navier-Stokes equations, applied in the source region, and the Non-linear Euler (NLE) equations applied in the acoustic propagation region; and to test and validate a recently derived generalized acoustic analogy theory in the framework of jet noise with acoustic source information obtained from RANS or LES. In the first part, the coupling between the Navier-Stokes and the NLE equations is accomplished via a buffer region, which is used to interpolate and penalize the flow variables of interest from the source region. The penalized flow variables are then applied as source terms in the NLE equations, to calculate the acoustic propagation. The non-linear Euler equations, discretized using high-accurate dispersion-relation preserving schemes constitute a very efficient approach for jet noise predictions in complex environments, especially for supersonic and hypersonic jets, where nonlinearities may propagate over long distances. In the second part, a RANS- or LES-informed model, which is used to provide data for Goldstein's generalized acoustic analogy, is presented. The generalized acoustic analogy of Goldstein is considered, wherein the effects of non-parallelism are taken into account and an asymptotic expansion is utilized to simplify the adjoint Green function equations. The use of the adjoint Green's function leads to a simple model for jet

Download or read book Prediction of Turbulence Generated Noise in Unheated Jets Part 1 Jeno Technical Manual Version 1 0 written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-03 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: The model-based approach, used by the JeNo code to predict jet noise spectral directivity, is described. A linearized form of Lilley's equation governs the non-causal Green s function of interest, with the non-linear terms on the right hand side identified as the source. A Reynolds-averaged Navier-Stokes (RANS) solution yields the required mean flow for the solution of the propagation Green s function in a locally parallel flow. The RANS solution also produces time- and length-scales needed to model the non-compact source, the turbulent velocity correlation tensor, with exponential temporal and spatial functions. It is shown that while an exact non-causal Green s function accurately predicts the observed shift in the location of the spectrum peak with angle as well as the angularity of sound at low to moderate Mach numbers, the polar directivity of radiated sound is not entirely captured by this Green s function at high subsonic and supersonic acoustic Mach numbers. Results presented for unheated jets in the Mach number range of 0.51 to 1.8 suggest that near the peak radiation angle of high-speed jets, a different source/Green s function convolution integral may be required in order to capture the peak observed directivity of jet noise. A sample Mach 0.90 heated jet is also discussed that highlights the requirements for a comprehensive jet noise prediction model.Khavaran, Abbas and Bridges, James and Georgiadis, NicholasGlenn Research CenterNOISE PREDICTION; TURBULENCE; JET AIRCRAFT NOISE; CONVOLUTION INTEGRALS; EXPONENTIAL FUNCTIONS; MACH NUMBER; MATHEMATICAL MODELS; SUPERSONIC SPEED

Download or read book Contributions to Jet Noise Prediction and Characterisation by Means of Hybrid Acoustic Analogy Techniques written by Vasileios Sassanis and published by . This book was released on 2018 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Computational aeroacoustics, hybrid approaches first resolve the source and nearfield regions of the flow field by employing Reynolds Averaged Navier-Stokes (RANS) equations, Large Eddy Simulations (LES) or Direct Numerical Simulations (DNS). The source region data is used to form source terms, which are, in turn, applied to either empirical models or equations linearized around a mean flow. An acoustic analogy type of model is used to propagate the acoustics to the farfield regions. The aim of this research is two-fold: to introduce and test a hybrid acoustic analogy, based on a coupling between the Navier-Stokes equations, applied in the source region, and the Non-linear Euler (NLE) equations applied in the acoustic propagation region; and to test and validate a recently derived generalized acoustic analogy theory in the framework of jet noise with acoustic source information obtained from RANS or LES. In the first part, the coupling between the Navier-Stokes and the NLE equations is accomplished via a buffer region, which is used to interpolate and penalize the flow variables of interest from the source region. The penalized flow variables are then applied as source terms in the NLE equations, to calculate the acoustic propagation. The non-linear Euler equations, discretized using high-accurate dispersion-relation preserving schemes constitute a very efficient approach for jet noise predictions in complex environments, especially for supersonic and hypersonic jets, where nonlinearities may propagate over long distances. In the second part, a RANS- or LES-informed model, which is used to provide data for Goldstein’s generalized acoustic analogy, is presented. The generalized acoustic analogy of Goldstein is considered, wherein the effects of non-parallelism are taken into account and an asymptotic expansion is utilized to simplify the adjoint Green function equations. The use of the adjoint Green’s function leads to a simple model for jet noise predictions for low frequencies and small observation angles, in the linear regime. Both approaches are extensively tested and validated against numerous benchmark problems and applications.

Download or read book Development of Computational Aeroacoustics Code for Jet Noise and Flow Prediction written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-20 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accurate prediction of jet fan and exhaust plume flow and noise generation and propagation is very important in developing advanced aircraft engines that will pass current and future noise regulations. In jet fan flows as well as exhaust plumes, two major sources of noise are present: large-scale, coherent instabilities and small-scale turbulent eddies. In previous work for the NASA Glenn Research Center, three strategies have been explored in an effort to computationally predict the noise radiation from supersonic jet exhaust plumes. In order from the least expensive computationally to the most expensive computationally, these are: 1) Linearized Euler equations (LEE). 2) Very Large Eddy Simulations (VLES). 3) Large Eddy Simulations (LES). The first method solves the linearized Euler equations (LEE). These equations are obtained by linearizing about a given mean flow and the neglecting viscous effects. In this way, the noise from large-scale instabilities can be found for a given mean flow. The linearized Euler equations are computationally inexpensive, and have produced good noise results for supersonic jets where the large-scale instability noise dominates, as well as for the tone noise from a jet engine blade row. However, these linear equations do not predict the absolute magnitude of the noise; instead, only the relative magnitude is predicted. Also, the predicted disturbances do not modify the mean flow, removing a physical mechanism by which the amplitude of the disturbance may be controlled. Recent research for isolated airfoils' indicates that this may not affect the solution greatly at low frequencies. The second method addresses some of the concerns raised by the LEE method. In this approach, called Very Large Eddy Simulation (VLES), the unsteady Reynolds averaged Navier-Stokes equations are solved directly using a high-accuracy computational aeroacoustics numerical scheme. With the addition of a two-equation turbulence model and the use of a relatively c

Download or read book Proceedings of the ASME JSME Joint Fluids Engineering Conference written by and published by . This book was released on 2003 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Simulations of the Flow Generated by Fluidic Inserts for Supersonic Jet Noise Reduction Based on Steady RANS Simulations written by Matthew Kapusta and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The investigation of military jet noise prediction and reduction is an ongoing activity. Supersonic military jets radiate higher noise levels than commercial aircraft and are not subject to noise requirements. The noise generating mechanisms for high-speed jets are not entirely understood, making it difficult to set strict noise standards similar to those imposed for commercial aircraft. However, many noise reduction techniques have been applied to attempt to alleviate environmental and health concerns. Little success has been achieved to date for noise reduction of exhaust jets on supersonic tactical aircraft.A newly developed method involves a system that generates fluidic inserts in a supersonic nozzle flow to produce noise reduction. Numerical simulations have been performed for a military-style basline nozzle and with the noise reduction method of fluidic inserts used at a design Mach number of 1.65 and at various off design conditions. The purpose of the current numerical study is to provide insight for the flow field generated by the fluidic inserts used to reduce supersonic jet noise. The supersonic jet simulations are based on the use of high fidelity meshes combined with advanced CFD technology. Steady Reynolds-averaged Navier-Stokes (RANS) simulations are used to predict the flow field. Noise measurements have been performed experimentally and the results from the numerical simulations provide a correlation between aerodynamic properties and the corresponding noise reduction. The complex nozzle geometry is modeled using both an unstructured mesh and a multiblock structured mesh. The grids are generated by ANSYS ICEM and Gridgen respectively. The numerical simulations are performed using ANSYS CFX and Wind-US. The simulations with Wind-US use the Spalart-Allmaras turbulence model, while the simulations with ANSYS CFX use the Menter SST turbulence model. The results from the two flow solvers are compared and provide good agreement. The objective is to simulate a military-style nozzle, which resembles engines of the GE F404 family, with fluidic inserts. The purpose of the fluidic inserts is to alter the flow field similar to that of a hard wall corrugation in order to reduce components of noise radiation. The addition of the fluidic inserts increases the complexity of the flow field for the supersonic jet. The numerical simulations performed help to better distinguish the effects on the flow field due to the fluidic inserts. Preliminary work has been performed on a simpler geometry to provide further insight to the effect of the fluidic inserts on the supersonic jet flow field. These simulations are performed by fluid injection into a supersonic freestream over a flat plate. All numerical simulations used a freestream Mach number of 1.5. The numerical simulations used a wide range of pressure ratios for injecting the fluid into the supersonic freestream. By changing the pressure ratio of the fluid injection, the deflection of the freestream flow was better understood. Simulations on a full three dimensional nozzle with fluidic inserts were performed with conditions based on the preliminary studies. Parameters such as total pressure and total temperature provide a representation of the fluidic insert shape. Other integrated flow properties at the nozzle exit such as streamwise vorticity and pressure differential were used to correlate with the noise reduction seen in the experiments.

Download or read book Computational Fluid Dynamics in Renewable Energy Technologies written by Mateusz Szubel and published by CRC Press. This book was released on 2023-10-02 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides practical examples on application of numerical methods in analysis of renewable energy processes Includes introduction to computational fluid dynamics (CFD) for practitioners Explores selected aspects of the methodology used in CFD simulations of renewable energy technologies Discusses tips and hints for efficient use of CFD codes functionalities Contains additional exercise devoted to geothermal systems

Download or read book MEGAFLOW Numerical Flow Simulation for Aircraft Design written by Norbert Kroll and published by Springer Science & Business Media. This book was released on 2006-10-02 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aerospace industry increasingly relies on advanced numerical simulation tools in the early design phase. This volume provides the results of a German initiative which combines many of the CFD development activities from the German Aerospace Center (DLR), universities, and aircraft industry. Numerical algorithms for structured and hybrid Navier-Stokes solvers are presented in detail. The capabilities of the software for complex industrial applications are demonstrated.

Download or read book American Doctoral Dissertations written by and published by . This book was released on 2001 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Unsteady Computational Fluid Dynamics in Aeronautics written by P.G. Tucker and published by Springer Science & Business Media. This book was released on 2013-08-30 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of Large Eddy Simulation (LES) and hybrids is a vibrant research area. This book runs through all the potential unsteady modelling fidelity ranges, from low-order to LES. The latter is probably the highest fidelity for practical aerospace systems modelling. Cutting edge new frontiers are defined. One example of a pressing environmental concern is noise. For the accurate prediction of this, unsteady modelling is needed. Hence computational aeroacoustics is explored. It is also emerging that there is a critical need for coupled simulations. Hence, this area is also considered and the tensions of utilizing such simulations with the already expensive LES. This work has relevance to the general field of CFD and LES and to a wide variety of non-aerospace aerodynamic systems (e.g. cars, submarines, ships, electronics, buildings). Topics treated include unsteady flow techniques; LES and hybrids; general numerical methods; computational aeroacoustics; computational aeroelasticity; coupled simulations and turbulence and its modelling (LES, RANS, transition, VLES, URANS). The volume concludes by pointing forward to future horizons and in particular the industrial use of LES. The writing style is accessible and useful to both academics and industrial practitioners. From the reviews: "Tucker's volume provides a very welcome, concise discussion of current capabilities for simulating and modellng unsteady aerodynamic flows. It covers the various pos sible numerical techniques in good, clear detail and presents a very wide range of practical applications; beautifully illustrated in many cases. This book thus provides a valuable text for practicing engineers, a rich source of background information for students and those new to this area of Research & Development, and an excellent state-of-the-art review for others. A great achievement." Mark Savill FHEA, FRAeS, C.Eng, Professor of Computational Aerodynamics Design & Head of Power & Propulsion Sciences, Department of Power & Propulsion, School of Engineering, Cranfield University, Bedfordshire, U.K. "This is a very useful book with a wide coverage of many aspects in unsteady aerodynamics method development and applications for internal and external flows." L. He, Rolls-Royce/RAEng Chair of Computational Aerothermal Engineering, Oxford University, U.K. "This comprehensive book ranges from classical concepts in both numerical methods and turbulence modelling approaches for the beginner to latest state-of-the-art for the advanced practitioner and constitutes an extremely valuable contribution to the specific Computational Fluid Dynamics literature in Aeronautics. Student and expert alike will benefit greatly by reading it from cover to cover." Sébastien Deck, Onera, Meudon, France

Download or read book Handbook of Noise and Vibration Control written by Malcolm J. Crocker and published by John Wiley & Sons. This book was released on 2007-10-05 with total page 1594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two of the most acclaimed reference works in the area of acoustics in recent years have been our Encyclopedia of Acoustics, 4 Volume set and the Handbook of Acoustics spin-off. These works, edited by Malcolm Crocker, positioned Wiley as a major player in the acoustics reference market. With our recently published revision of Beranek & Ver's Noise and Vibration Control Engineering, Wiley is a highly respected name in the acoustics business. Crocker's new handbook covers an area of great importance to engineers and designers. Noise and vibration control is one largest areas of application of the acoustics topics covered in the successful encyclopedia and handbook. It is also an area that has been under-published in recent years. Crocker has positioned this reference to cover the gamut of topics while focusing more on the applications to industrial needs. In this way the book will become the best single source of need-to-know information for the professional markets.

Download or read book Computation of Supersonic Jet Noise Under Imperfectly Expanded Conditions written by Chan M. Kim and published by . This book was released on 1993 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.

Download or read book The Prediction and Analysis of Jet Flows and Scattered Turbulent Mixing Noise about Flight Vehicle Airframes written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-05-23 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: Jet flows interacting with nearby surfaces exhibit a complex behavior in which acoustic and aerodynamic characteristics are altered. The physical understanding and prediction of these characteristics are essential to designing future low noise aircraft. A new approach is created for predicting scattered jet mixing noise that utilizes an acoustic analogy and steady Reynolds-averaged Navier-Stokes solutions. A tailored Green's function accounts for the propagation of mixing noise about the airframe and is calculated numerically using a newly developed ray tracing method. The steady aerodynamic statistics, associated unsteady sound source, and acoustic intensity are examined as jet conditions are varied about a large flat plate. A non-dimensional number is proposed to estimate the effect of the aerodynamic noise source relative to jet operating condition and airframe position.The steady Reynolds-averaged Navier-Stokes solutions, acoustic analogy, tailored Green's function, non-dimensional number, and predicted noise are validated with a wide variety of measurements. The combination of the developed theory, ray tracing method, and careful implementation in a stand-alone computer program result in an approach that is more first principles oriented than alternatives, computationally efficient, and captures the relevant physics of fluid-structure interaction. Miller, Steven A. E. Langley Research Center AEROACOUSTICS; GREEN'S FUNCTIONS; JET MIXING FLOW; LOW NOISE; TURBULENT MIXING; AERODYNAMIC CHARACTERISTICS; AERODYNAMIC NOISE; REYNOLDS AVERAGING; NAVIER-STOKES EQUATION; RAY TRACING; NOISE GENERATORS; PREDICTIONS

Download or read book Jet Noise Physics and Modeling Using First Principles Simulations written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: An extensive analysis of our jet DNS database has provided for the first time the complex correlations that are the core of many statistical jet noise models, including MGBK. We have also for the first time explicitly computed the noise from different components of a commonly used noise source as proposed in many modeling approaches. Key findings are: (1) While two-point (space and time) velocity statistics are well-fitted by decaying exponentials, even for our low-Reynolds-number jet, spatially integrated fourth-order space/retarded-time correlations, which constitute the noise "source" in MGBK, are instead well-fitted by Gaussians. The width of these Gaussians depends (by a factor of 2) on which components are considered. This is counter to current modeling practice, (2) A standard decomposition of the Lighthill source is shown by direct evaluation to be somewhat artificial since the noise from these nominally separate components is in fact highly correlated. We anticipate that the same will be the case for the Lilley source, and (3) The far-field sound is computed in a way that explicitly includes all quadrupole cancellations, yet evaluating the Lighthill integral for only a small part of the jet yields a far-field noise far louder than that from the whole jet due to missing nonquadrupole cancellations. Details of this study are discussed in a draft of a paper included as appendix A.Freund, Jonathan B.Glenn Research CenterDIRECT NUMERICAL SIMULATION; JET AIRCRAFT NOISE; MATHEMATICAL MODELS; AEROACOUSTICS; FLOW DISTRIBUTION; COMPUTATIONAL FLUID DYNAMICS; LOW REYNOLDS NUMBER; FAR FIELDS; QUADRUPOLES; NOZZLE DESIGN; NOISE PREDICTION (AIRCRAFT); TURBULENT FLOW; RANDOM NOISE