Download or read book An applications based assessment of present and future robot development written by Michael Scott Butler and published by . This book was released on 1992 with total page 1500 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the though that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemi nation. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 37 (thesis year 1992) a total of 12,549 thesis titles from 25 Canadian and 153 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 37 reports theses submitted in 1992, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.
Download or read book The World Yearbook of Robotics Research and Development written by Sbornik Statei and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: How quickly the technological 'flavour of the month' changes. At the beginning of the 1980's many saw 'robotics' as being something of a pana cea for those problems in the manufacturing industries which had been exacerbated by the world recession. Those working at the time in the field of robotics stressed that robots themselves were only part of the solution. Yet in many quarters the 'hype' for the new technology apparently knew few bounds, resulting, inexorably, in many industries painfully discover ing for themselves a new realism, closely followed by disillusionment. In its wider sense the term 'robotics' covers an extremely broad spec trum of technologies ranging from extremely flexible, highly sensory and integrated systems capable of handling a very diverse product range, through to comparatively inflexible, high volume systems which can merely handle slightly different variations of the same basic product. As a result of the one 'buzzword' referring to such a variety of actual system types, the disillusionment which started to become apparent during the early 1980's acted as something of a double edged sword. A given com pany might consider a particular robotics-based technological solution to its production problems, find that it was unsuitable, and so renounce all robotics approaches as inappropriate. Yet just because one position on that spectrum of technological solutions was unsuitable for the company should not have led them to assume that there was no other robotics solu tion that was appropriate.
Download or read book The 21st Century Industrial Robot When Tools Become Collaborators written by Maria Isabel Aldinhas Ferreira and published by Springer Nature. This book was released on 2021-10-25 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to discuss the technical and ethical challenges posed by the present technological framework and to highlight the fundamental role played by human-centred design and human factors in the definition of robotic architectures for human–robot collaboration. The book gives an updated overview of the most recent robotic technology, conceived and designed to collaborate with human beings in industrial working scenarios. The technological development of robotics over the last years and the fast evolution of AI, machine learning and IoT have paved the way for applications that extend far beyond the typical use of robots performing repetitive tasks in exclusive spaces. In this new technological paradigm that is expected to drive the robotics market in the coming years, robots and workers will coexist in the same workplace, sharing not only this lived space, but also the roles and functions inherent to a process of production, merging the benefits of automated and manual performing. However, having robots cooperating in real time with workers, responding in a physical, psychological and social adequate way, requires a human-centred design that not only calls for high safety standards regulating the quality of human–robot interaction, but also demands the robot's fine-grained perception and awareness of the dynamics of its surrounding environment, namely the behaviours of their human peers—their expected actions/responses—fostering the necessary collaborative efforts towards the accomplishment of the tasks to be executed.
Download or read book Artificial Intelligence in Healthcare written by Adam Bohr and published by Academic Press. This book was released on 2020-06-21 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial Intelligence (AI) in Healthcare is more than a comprehensive introduction to artificial intelligence as a tool in the generation and analysis of healthcare data. The book is split into two sections where the first section describes the current healthcare challenges and the rise of AI in this arena. The ten following chapters are written by specialists in each area, covering the whole healthcare ecosystem. First, the AI applications in drug design and drug development are presented followed by its applications in the field of cancer diagnostics, treatment and medical imaging. Subsequently, the application of AI in medical devices and surgery are covered as well as remote patient monitoring. Finally, the book dives into the topics of security, privacy, information sharing, health insurances and legal aspects of AI in healthcare. Highlights different data techniques in healthcare data analysis, including machine learning and data mining Illustrates different applications and challenges across the design, implementation and management of intelligent systems and healthcare data networks Includes applications and case studies across all areas of AI in healthcare data
Download or read book Service Robots and Robotics Design and Application written by Ceccarelli, Marco and published by IGI Global. This book was released on 2012-03-31 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book offers the latest research within the field of service robotics, using a mixture of case studies, research, and future direction in this burgeoning field of technology"--
Download or read book Analyzing Future Applications of AI Sensors and Robotics in Society written by Musiolik, Thomas Heinrich and published by IGI Global. This book was released on 2020-09-11 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rise of artificial intelligence and its countless branches have caused many professional industries to rethink their traditional methods of practice and develop new techniques to keep pace with technological advancement. The continued use of intelligent technologies in the professional world has propelled researchers to contemplate future opportunities and challenges that artificial intelligence may withhold. Significant research is a necessity for understanding future trends of artificial intelligence and the preparation of prospective issues. Analyzing Future Applications of AI, Sensors, and Robotics in Society provides emerging research exploring the potential uses and future challenges of intelligent technological advancements and their impact in education, finance, politics, business, healthcare, and engineering. Featuring coverage on a broad range of topics such as neuronal networks, cognitive computing, and e-health, this book is ideally designed for practitioners, researchers, scientists, executives, strategists, policymakers, academicians, government officials, developers, and students seeking current research on future societal uses of intelligent technology.
Download or read book Robotics written by George A. Bekey and published by World Scientific. This book was released on 2008 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the results of an assessment of the state of robotics in Japan, South Korea, Western Europe and Australia and a comparison of robotics R&D programs in these countries with those in the United States. The comparisons include areas like robotic vehicles, space robotics, service robots, humanoid robots, networked robots, and robots for biological and medical applications, and based on criteria such as quality, scope, funding and commercialization. This important study identifies a number of areas where the traditional lead of the United States is being overtaken by developments in other countries.
Download or read book Robot Force Control written by Bruno Siciliano and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the fundamental requirements for the success of a robot task is the capability to handle interaction between manipulator and environment. The quantity that describes the state of interaction more effectively is the contact force at the manipulator's end effector. High values of contact force are generally undesirable since they may stress both the manipulator and the manipulated object; hence the need to seek for effective force control strategies. The book provides a theoretical and experimental treatment of robot interaction control. In the framework of model-based operational space control, stiffness control and impedance control are presented as the basic strategies for indirect force control; a key feature is the coverage of six-degree-of-freedom interaction tasks and manipulator kinematic redundancy. Then, direct force control strategies are presented which are obtained from motion control schemes suitably modified by the closure of an outer force regulation feedback loop. Finally, advanced force and position control strategies are presented which include passivity-based, adaptive and output feedback control schemes. Remarkably, all control schemes are experimentally tested on a setup consisting of a seven-joint industrial robot with open control architecture and force/torque sensor. The topic of robot force control is not treated in depth in robotics textbooks, in spite of its crucial importance for practical manipulation tasks. In the few books addressing this topic, the material is often limited to single-degree-of-freedom tasks. On the other hand, several results are available in the robotics literature but no dedicated monograph exists. The book is thus aimed at filling this gap by providing a theoretical and experimental treatment of robot force control.
Download or read book Robots in Industry written by Richard Kendall Miller and published by . This book was released on 1983 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the current state-of-the-art of robotics & potential future applications for the following: glass industry, food & pharmaceutical industries, footwear industry, wood products industry, brick industry, electronics industry, electric utilities, textile industry.
Download or read book Modelling and Control of Robot Manipulators written by Lorenzo Sciavicco and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental and technological topics are blended uniquely and developed clearly in nine chapters with a gradually increasing level of complexity. A wide variety of relevant problems is raised throughout, and the proper tools to find engineering-oriented solutions are introduced and explained, step by step. Fundamental coverage includes: Kinematics; Statics and dynamics of manipulators; Trajectory planning and motion control in free space. Technological aspects include: Actuators; Sensors; Hardware/software control architectures; Industrial robot-control algorithms. Furthermore, established research results involving description of end-effector orientation, closed kinematic chains, kinematic redundancy and singularities, dynamic parameter identification, robust and adaptive control and force/motion control are provided. To provide readers with a homogeneous background, three appendices are included on: Linear algebra; Rigid-body mechanics; Feedback control. To acquire practical skill, more than 50 examples and case studies are carefully worked out and interwoven through the text, with frequent resort to simulation. In addition, more than 80 end-of-chapter exercises are proposed, and the book is accompanied by a solutions manual containing the MATLAB code for computer problems; this is available from the publisher free of charge to those adopting this work as a textbook for courses.
Download or read book Robotics and Automation in the Food Industry written by Darwin G Caldwell and published by Elsevier. This book was released on 2012-12-03 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: The implementation of robotics and automation in the food sector offers great potential for improved safety, quality and profitability by optimising process monitoring and control. Robotics and automation in the food industry provides a comprehensive overview of current and emerging technologies and their applications in different industry sectors.Part one introduces key technologies and significant areas of development, including automatic process control and robotics in the food industry, sensors for automated quality and safety control, and the development of machine vision systems. Optical sensors and online spectroscopy, gripper technologies, wireless sensor networks (WSN) and supervisory control and data acquisition (SCADA) systems are discussed, with consideration of intelligent quality control systems based on fuzzy logic. Part two goes on to investigate robotics and automation in particular unit operations and industry sectors. The automation of bulk sorting and control of food chilling and freezing is considered, followed by chapters on the use of robotics and automation in the processing and packaging of meat, seafood, fresh produce and confectionery. Automatic control of batch thermal processing of canned foods is explored, before a final discussion on automation for a sustainable food industry.With its distinguished editor and international team of expert contributors, Robotics and automation in the food industry is an indispensable guide for engineering professionals in the food industry, and a key introduction for professionals and academics interested in food production, robotics and automation. Provides a comprehensive overview of current and emerging robotics and automation technologies and their applications in different industry sectors Chapters in part one cover key technologies and significant areas of development, including automatic process control and robotics in the food industry and sensors for automated quality and safety control Part two investigates robotics and automation in particular unit operations and industry sectors, including the automation of bulk sorting and the use of robotics and automation in the processing and packaging of meat, seafood, fresh produce and confectionery
Download or read book Novel Design and Applications of Robotics Technologies written by Zhang, Dan and published by IGI Global. This book was released on 2018-09-14 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through expanded intelligence, the use of robotics has fundamentally transformed a variety of fields, including manufacturing, aerospace, medical, social services, and agriculture. Providing successful techniques in robotic design allows for increased autonomous mobility, which leads to a greater productivity level. Novel Design and Applications of Robotics Technologies provides innovative insights into the state-of-the-art technologies in the design and development of robotic technologies and their real-world applications. The content within this publication represents the work of interactive learning, microrobot swarms, and service robots. It is a vital reference source for computer engineers, robotic developers, IT professionals, academicians, and researchers seeking coverage on topics centered on the application of robotics to perform tasks in various disciplines.
Download or read book Robotics and Factories of the Future written by S.N. Dwivedi and published by Springer. This book was released on 1984-12 with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt: An International Conference on Robotics and Factories of the Future was held on December 4-7, 1984 in Charlotte, North Carolina, USA. The development of technology and the status as it stands today is highly multidisciplinary and complex in nature. It has added new dimensions and challenges in the development of factories of the future. Thus it calls upon an integrated approach of technological, economic and sociological impacts of robots and computers in factories of the future. Sessions in this conference included: Planning of Automation, Future Trends & Management, Integration of CAD/CAM & Robot Cell, Robots Applications, Manipulation I, Controls I, Manipulation II, Computer Vision and Sensors, Robot Cell and Mobile Robot, Controls II, Artificial Intelligence, Advanced Applications of Robots, Industrial Panel, CAD/CAM and Flexible Manufacturing, Robotics and CAD/CAM Education I, Social and Economic Implications, Robotics and CAD/CAM Education II, and Industry and User Interaction. 142 papers were presented during the conference and participants came from 18 countries. The plenary session and keynote speakers were: J. M. Kelly, IBM Quality Institute, Southbury, Connecticut; M. E. Merchant, Metcut Research, Cincinnati, Ohio; Stellio Demark, ASEA Robotics, Milwaukee, Wisconsin; Stanley J. Polcyn, Unimation Inc., Danbury, Connecticut; Carl Ruoff,Jet Propulsion Lab, Pasadena, California; Joseph Tulkoff, Lockheed Georgia Company, Marietta, Georgia; N. M. Swani, Indian Institute of Technology, Delhi, India; James R. Barrett, Computer Vision, Bedford, Maryland; Hadi A. Akeel, GMF Robotics, Troy, Michigan; John M.
Download or read book Artificial Intelligence for Future Generation Robotics written by Rabindra Nath Shaw and published by Elsevier. This book was released on 2021-07-07 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial Intelligence for Future Generation Robotics offers a vision for potential future robotics applications for AI technologies. Each chapter includes theory and mathematics to stimulate novel research directions based on the state-of-the-art in AI and smart robotics. Organized by application into ten chapters, this book offers a practical tool for researchers and engineers looking for new avenues and use-cases that combine AI with smart robotics. As we witness exponential growth in automation and the rapid advancement of underpinning technologies, such as ubiquitous computing, sensing, intelligent data processing, mobile computing and context aware applications, this book is an ideal resource for future innovation. Brings AI and smart robotics into imaginative, technically-informed dialogue Integrates fundamentals with real-world applications Presents potential applications for AI in smart robotics by use-case Gives detailed theory and mathematical calculations for each application Stimulates new thinking and research in applying AI to robotics
Download or read book Computer Vision and Sensor Based Robots written by George G. Dodd and published by Springer. This book was released on 1979-09 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal ofthe symposium, "Computer Vision and Sensor-Based Robots," held at the General Motors Research Laboratories on September 2S and 26, 1978, was to stimulate a closer interaction between people working in diverse areas and to discuss fundamental issues related to vision and robotics. This book contains the papers and general discussions of that symposium, the 22nd in an annual series covering different technical disciplines that are timely and of interest to General Motors as well as the technical community at large. The subject of this symposium remains timely because the cost of computer vision hardware continues to drop and there is increasing use of robots in manufacturing applications. Current industrial applications of computer vision range from simple systems that measure or compare to sophisticated systems for part location determination and inspection. Almost all industrial robots today work with known parts in known posi tions, and we are just now beginning to see the emergence of programmable automa tion in which the robot can react to its environment when stimulated by visual and force-touch sensor inputs. As discussed in the symposium, future advances will depend largely on research now underway in several key areas. Development of vision systems that can meet industrial speed and resolution requirements with a sense of depth and color is a necessary step.
Download or read book The World Yearbook of Robotics Research and Development written by and published by . This book was released on 1986 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt:
