Download or read book An Application of Fracture Mechanics to Adhesive Bonded Joints written by Marie B. Ventrice and published by . This book was released on 1968 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Application of Fracture Mechanics to Polymers Adhesives and Composites written by D R Moore and published by Elsevier. This book was released on 2003-12-04 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Application of Fracture Mechanics to Polymers, Adhesives and Composites
Download or read book Adhesive Joints written by K.L. Mittal and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the proceedings of the International Symposium on Adhesive Joints: Formation, Characteristics and Testing held under the auspices of the Division of Polymer Mater ials:Science and Engineering of the American Chemical Society in Kansas City, MO, September 12-17, 1982. There is a myriad of applications (ranging from aerospace to surgery) where adhesives are used to join different materials, and concomitantly the understanding of the behavior of adhesive joints becomes very important. There are many factors which can influence the behavior of adhesive joints, e.g., substrate preparation, in terfacial aspects, joint design, mode of stress, external environ ment, etc., and in order to understand the joint behavior in a holistic manner, one must take due cognizance of all these germane factors. So this symposium was planned to address not only how to make acceptable bonds but their characterization, durability and testing were also accorded due consideration.
Download or read book Applications of Fracture Mechanics to the Durability of Bonded Composite Joints written by W. Steven Johnson and published by . This book was released on 1998 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increased numbers of bonded composite components and bonded repairs of cracked structures make knowledge of adhesive bonding crucial to aircraft design and life extension. This report covers an effort which focused on using fracture mechanics to evaluate the Mode I fracture and fatigue properties of several adhesively bonded aerospace material systems. The research concentrated on bond line cracking rather than fatigue crack growth in composite or metal adherends. Particular attention was paid to the environmental durability of bonded systems in use or intended for use on transport, fighter, and supersonic aircraft. Analysis was performed using closed-form solutions as well as finite element analyses. Results were discussed with respect to their relevance and applicability to bonded joint design. Key results include the identification of significant degradation in some varieties of bonded joints subjected to long-term isothermal exposure under hot/wet conditions. The degradation was manifested by decreased fracture toughness and fatigue threshold levels. Finite element analyses were performed on specimens with dissimilar adherends having complex geometries and thermally induced stresses in the bond line. A case study in which finite element analyses were used to relate the experimental results from this program with those of an independent project is also included. The analyses highlight the importance of using tapered adherends to avoid fatigue failures and show that typical aircraft skin stresses are below experimentally obtained threshold values for the specimen geometries investigated. Results of this study emphasize that the environmental durability of adhesively bonded joints is a key issue which must be considered by aerospace design engineers.
Download or read book Anisotropic Elasticity written by Thomas Chi-tsai Ting and published by Oxford University Press, USA. This book was released on 1996 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elasticity is a property of materials which returns them to their original shape after forces applied to change the shape have been removed. This advanced text explores the problems of composite or anisotropic materials and their elasticity.
Download or read book Adhesively Bonded Joints written by W. Steven Johnson and published by ASTM International. This book was released on 1988 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adhesive Joints Formation Characteristics and Testing written by Kash L. Mittal and published by CRC Press. This book was released on 2023-01-27 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the proceedings of the Second International Symposium on Adhesive Joints: Formation, Characteristics and Testing held in Newark, NJ, May 22-24, 2000. Since the first symposium, held in 1982, there had been tremendous research activity dealing with many aspects of adhesive joints. This volume contains a total of 21 papers, which were all properly peer reviewed, revised and edited before inclusion. Therefore, this book is not merely a collection of unreviewed manuscripts, but rather represents information which has passed peer scrutiny. Furthermore, the authors were asked to update their manuscripts, so the information contained in this book should be current and fresh. The book is divided into three parts: 1) General Papers; 2) Evaluation, Analysis and Testing; and 3) Durability Aspects. The topics covered include: molecular brush concepts in enhancing strength of adhesive joints; factors affecting performance of adhesive joints; substrate preparation and modification; interfacial/interphasial aspects; determination of locus of failure; analysis and evaluation of adhesive joints using various techniques; testing of adhesive joints; stress analysis; application of fracture mechanics; durability aspects; accelerated environmental degradation of adhesive joints; solvent uptake; and adhesives with special characteristics. This volume represents a commentary on the current R&D activity in this arena and it should be of great value and interest to anyone interested in adhesive bonding / adhesive joints. Furthermore, this volume contains a number of excellent review/overview articles, which should be of particular value.
Download or read book Advances in Numerical Modeling of Adhesive Joints written by Lucas Filipe Martins da Silva and published by Springer Science & Business Media. This book was released on 2011-10-15 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the most recent numerical modeling of adhesive joints. Advances in damage mechanics and extended finite element method are described in the context of the Finite Element method with examples of application. The book also introduces the classical continuum mechanics and fracture mechanics approach and discusses the boundary element method and the finite difference method with indication of the cases they are most adapted to. At the moment there a no numerical technique that can solve any problem and the analyst needs to be aware of the limitations involved in each case.
Download or read book Adhesion and Adhesives written by Anthony J. Kinloch and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last decade, or so, the growth in the use of adhesives, especially in ever more technically demanding applications, has been rapid and many major developments in the technology of adhesives have been reported. This growth has also led to attention being focused on somewhat more basic studies of the science of adhesion and adhesives, and in recent years our level of fundamental knowledge concerning the formation and mechanical performance of adhesive joints has increased dramatically. Such studies have, of course, been aided greatly by the development of the tools at the disposal of the investigators. For example, specific surface analytical techniques, such as X-ray photoelectron and secondary-ion mass spectroscopy, and the increasingly sophisticated methods of stress analysis and fracture mechanics have been put to good use in furthering our understanding of the science of adhesion and adhesives. The present book attempts to review the multidisciplined subject of adhesion and adhesives, considering both the science and technology involved in the formation and mechanical performance of adhesive joints. The author would like to thank his friends and colleagues for useful discus sions and help in the preparation of this book. I am particularly grateful to P. Cawley, J. Comyn, W. A. Lees, A. C. Roulin-Moloney, W. C. Wake, J. G. Williams and R. J. Young who have read and commented on various chapters and P. Farr for preparing the diagrams.
Download or read book Adhesive Joints written by Wulff Possart and published by John Wiley & Sons. This book was released on 2019-02-11 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of adhesive bonding, providing both basic knowledge of polymer adhesives as well as insights into their mechanical and ageing properties. The book is unique in its up-to-date, self-contained summary of recent developments and in its integration of the theory, synthesis and mechanical properties of adhesive joints as well as their applications. Well-structured throughout, the first chapter introduces the initial state of adhesive joints and their formation, while subsequent chapters discuss the ageing and failure as well as the weathering of adhesive joints. In addition the issue of long-term behavior and lifetime predictions are considered. The text is rounded off by a look at future technological advances. The result is an essential reference for a wide range of disciplines
Download or read book Strength Prediction of Adhesively Bonded Joints written by Raul D. S. G. Campilho and published by CRC Press. This book was released on 2017-05-25 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adhesively-bonded joints provide many advantages over conventional mechanical fasteners and are increasingly receiving attention as an alternative to mechanical joints in engineering applications. The traditional fasteners usually result in the cutting of fibers and hence the introduction of stress concentrations, both of which reduce structural integrity. By contrast, bonded joints are more continuous and have potential advantages of strength-to-weight ratio, design flexibility, and ease of fabrication. This book provides an overview of available analytical methods as well as numerical methods.
Download or read book A Fracture Mechanics Approach for Designing Adhesively Bonded Joints written by and published by . This book was released on 1983 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling of Adhesively Bonded Joints written by Lucas F. M. da Silva and published by Springer Science & Business Media. This book was released on 2008-10-14 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: A lot of recent developments have been made about adhesively bonded joints modeling using various methods of analysis. The increasing application of adhesives in industry is partly due to the increased sophistication and reliability of adhesive joints modeling. The book proposed intends to provide the designer with the most advanced stress analyses techniques in adhesive joints to reinforce the use of this promising bonding technique.
Download or read book Structural Adhesive Joints in Engineering written by R. D. Adams and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: The intention of this book is that it should contain everything an engineer needs to know to be able to design and produce adhesively bonded joints which are required to carry significant loads. The advan tages and disadvantages of bonding are given, together with a sufficient understanding of the necessary mechanics and chemistry to enable the designer to make a sound engineering judgement in any particular case. The stresses in joints are discussed extensively so that the engineer can get sufficient philosophy or feel for them, or can delve more deeply into the mathematics to obtain quantitative solutions even with elasto plastic behaviour. A critical description is given of standard methods of testing adhesives, both destructively and non-destructively. The essen tial chemistry of adhesives and the importance of surface preparation are described and guidance is given for adhesive selection by me ans of check lists. For many applications, there will not be a unique adhesive which alone is suitable, and factors such as cost, convenience, produc tion considerations or familiarity may be decisive. A list of applications is given as examples. The authors wish to increase the confidence of engineers using adhesive bonding in load-bearing applications by the information and experience presented. With increasing experience of adhesives en gineering, design will become more elegant as weH as more fitted to its products.
Download or read book The Mechanics of Adhesives in Composite and Metal Joints written by Magd Abdel Wahab and published by DEStech Publications, Inc. This book was released on 2014-04-07 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific background and practical methods for modeling adhered joints Tools for analyzing stress, fracture, fatigue crack propagation, thermal, diffusion and coupled thermal-stress/diffusion-stress, as well as life prediction of joints Book includes access to downloadable macrofiles for ANSYS This text investigates the mechanics of adhesively bonded composite and metallic joints using finite element analysis, and more specifically, ANSYS, the basics of which are presented. The book provides engineers and scientists with the technical know-how to simulate a variety of adhesively bonded joints using ANSYS. It explains how to model stress, fracture, fatigue crack propagation, thermal, diffusion and coupled field analysis of the following: single lap, double lap, lap strap/cracked lap shear, butt and cantilevered beam joints. Readers receive free digital access to a variety of input and program data, which can be downloaded as macrofiles for modeling with ANSYS.
Download or read book The Fracture Mechanics Approach to the Assessment of Adhesive Joint Performance in Bonded Wood Products written by Robert Oboigbaotor Ebewele and published by . This book was released on 1980 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fracture Mechanics written by Dietmar Gross and published by Springer Science & Business Media. This book was released on 2011-07-03 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: - self-contained and well illustrated - complete and comprehensive derivation of mechanical/mathematical results with enphasis on issues of practical importance - combines classical subjects of fracture mechanics with modern topics such as microheterogeneous materials, piezoelectric materials, thin films, damage - mechanically and mathematically clear and complete derivations of results
