Download or read book An Analytical Approach to Reference Samples for Ultrasonic Residual Stress Measurement written by NN. Hsu and published by . This book was released on 1982 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: While residual stress measurements using ultrasonic techniques have been under development for some time, practical applications are still limited. One of the difficulties is the lack of suitable reference samples for instrument calibration. This paper specifically addresses the question of how to produce a known stress-state reference sample, and ultrasonically determine its zero stress state. The approach was to design and construct a sample possessing residual stresses that can be deduced from established theory. A shrink-fit ring-plug assembly was fabricated from carefully screened aluminum bar stock, forming a disk suitable for both longitudinal and shear wave calibration. Here we report results using longitudinal waves.
Download or read book Residual Stresses written by A. Niku-Lari and published by Elsevier. This book was released on 2014-05-17 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: Residual Stresses presents a collection of articles that provides information regarding the use of surface treatment systems. It discusses the developments in the technology and application of surface treatment. It addresses the influence of minor stresses on the performance of materials. Some of the topics covered in the book are the introduction to self-equilibrating stresses existing in materials, the stresses that form as a consequence of welding, the stresses made by machining, and the mechanical generation of self-stresses. The analysis of the stresses caused by thermal and thermochemical surface treatments is covered. The minor stresses in composite materials are discussed. The text describes the stresses in uranium and uranium alloys. The Trepan or ring core method, centre-hole method, and Sach's method are presented. A chapter of the volume is devoted to the measurement of residual stresses. Another section of the book focuses on the application of shot peened plates to residual stress distribution. The book will provide useful information to mechanics, engineers, students, and researchers.
Download or read book Residual Stress Effects in Fatigue written by J. F. Throop and published by ASTM International. This book was released on 1982 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NBS Special Publication written by and published by . This book was released on 1968 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Residual Stress Measurement and the Slitting Method written by Weili Cheng and published by Springer. This book was released on 2006-12-04 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides complete coverage of the slitting method. It details new results in analysis, computation, and estimation and discusses different roles of residual stresses from the fracture mechanics perspective. It provides detailed formulations and examples of compliance functions, weighted least squares fit and convergence test in stress estimation, and computer programs to facilitate the implementation of the slitting method.
Download or read book Materials Characterization for Systems Performance and Reliability written by James W. McCauley and published by Springer Science & Business Media. This book was released on 2013-03-13 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Sagamore Army Materials Research Conferences have been held in the beautiful Adirondack Mountains of New York State since 1954. Organized and conducted by the Army Materials and Mechanics Research Center (Watertown, Massachusetts) in cooperation with Syracuse University, the Conferences have focused on key issues in Materials Science and Engineering that impact directly on current or future Army problem areas. A select group of speakers and attendees are assembled from academia, industry, and other parts of the Department of Defense and Government to provide an optimum forum for a full dialogue on the selected topic. This book is a collection of the full manuscripts of the formal presentations given at the Conference. The emergence and use of nontraditional materials and the excessive failures and reject rates of high technology, materials intensive engineering systems necessitates a new approach to quality control. Thus, the theme of this year's Thirty-First Conference, "Materials Characterization for Systems Performance and Reliability," was selected to focus on the need and mechanisms to transition from defect interrogation of materials after production to utilization of materials characterization during manufacturing. The guidance and help of the steering committee and the dedicated and conscientious efforts of Ms. Karen Ka100stian, Con ference Coordinator, and Mr. William K. Wilson, and Ms. Mary Ann Holmquist are gratefully acknowledged. The continued active interest and support of Dr. Edward S. Wright, Director, AMMRC; Dr. Robert W. Lewis, Associate Director, AMMRC; and COL L. C. Ross, Commander/ Deputy Director, AMMRC; are greatly appreciated.
Download or read book Publications of the National Bureau of Standards Catalog written by United States. National Bureau of Standards and published by . This book was released on 1977 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Measurement of Residual Stresses written by Society for Experimental Mechanics (U.S.) and published by . This book was released on 1996 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from 24 authorities from around the world, this handbook provides the most authoritative reference resource available on the impact of residual stresses on mechanical properties of materials and structures. You'll find detailed descriptions of a full range of measuring techniques, including hole drilling, layer removal, sectioning, X-ray diffraction, neutron diffraction, and ultrasonic methods. A variety of case studies which illustrate use of specific techniques are included to facilitate your understanding. Design and structural engineers, metallurgists, and material scientists will find a wealth of valuable information covering recent developments in residual stress measuring techniques, with guidelines provided for selecting the right measuring strategy for each specific application, and many helpful tips for improving quality control.
Download or read book Dynamic Elastic Modulus Measurements in Materials written by Alan Wolfenden and published by ASTM International. This book was released on 1990 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1950 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of Research of the National Bureau of Standards written by United States. National Bureau of Standards and published by . This book was released on 1988 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural and Residual Stress Analysis by Nondestructive Methods written by V. Hauk and published by Elsevier. This book was released on 1997-11-10 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of stress analysis has gained its momentum from the widespread applications in industry and technology and has now become an important part of materials science. Various destructive as well as nondestructive methods have been developed for the determination of stresses. This timely book provides a comprehensive review of the nondestructive techniques for strain evaluation written by experts in their respective fields.The main part of the book deals with X-ray stress analysis (XSA), focussing on measurement and evaluation methods which can help to solve the problems of today, the numerous applications of metallic, polymeric and ceramic materials as well as of thin-film-substrate composites and of advanced microcomponents. Furthermore it contains data, results, hints and recommendations that are valuable to laboratories for the certification and accreditation of their stress analysis.Stress analysis is an active field in which many questions remain unsettled. Accordingly, unsolved problems and conflicting results are discussed as well. The assessment of the experimentally determined residual and structural stress states on the static and dynamic behavior of materials and components is handled in a separate chapter.Students and engineers of materials science and scientists working in laboratories and industries will find this book invaluable.
Download or read book Springer Handbook of Experimental Solid Mechanics written by William N. Sharpe, Jr. and published by Springer Science & Business Media. This book was released on 2008-12-04 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Springer Handbook of Experimental Solid Mechanics documents both the traditional techniques as well as the new methods for experimental studies of materials, components, and structures. The emergence of new materials and new disciplines, together with the escalating use of on- and off-line computers for rapid data processing and the combined use of experimental and numerical techniques have greatly expanded the capabilities of experimental mechanics. New exciting topics are included on biological materials, MEMS and NEMS, nanoindentation, digital photomechanics, photoacoustic characterization, and atomic force microscopy in experimental solid mechanics. Presenting complete instructions to various areas of experimental solid mechanics, guidance to detailed expositions in important references, and a description of state-of-the-art applications in important technical areas, this thoroughly revised and updated edition is an excellent reference to a widespread academic, industrial, and professional engineering audience.
Download or read book Nondestructive Methods for Material Property Determination written by C.O. Ruud and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interest in materials property determination by nondestructive means is increasing especially for in-process and in-service inspection of structural and electronic materials and components. Such attention is due to several factors, including increased automation of manufacturing processes, the demand for greater reliability in consumer products and military hardware, and more severe demands on the performance of materials. This book represents the proceedings for the Symposium on Nondestructive Hethods for Haterial Property Determination held April 6 to 8, 1983, at the Hotel Hershey in Hershey, Pennsylvania. That symposium was one of the first meetings concerned specifically with nondestructive material property determination (characteriza tion). Its purpose was to stimulate intercourse between researchers, engineers, and theoreticians so as to focus upon the multidiseiplinary problems of advancing the state of the art in this area. The papers in the book are concerned mainly with acoustic (including ultrasonic), magnetic, electrical, and x-ray diffraction techniques and applications. Hany of the papers describe well developed technologies that are currently in practical application, while others discuss concepts which will never emerge from the laboratory but perhaps will provide the groundwork for more practical ideas.
Download or read book Review of Progress in Quantitative Nondestructive Evaluation written by Donald O. Thompson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 2462 pages. Available in PDF, EPUB and Kindle. Book excerpt: These Proceedings, consisting of Parts A and B, contain the edited versions of most of the papers presented at the annual Review of Progress in Quantitative Nondestructive Evaluation held at Snowmass Village, Colorado, on July 31 to August 4, 1994. The Review was organized by the Center for NDE at Iowa State University, in cooperation with the Ames Laboratory of the US DOE, the Materials Directorate of the Wright Laboratory, Wright-Patterson Air Force Base, the American Society of Nondestructive Testing, the Department of Energy, the National Institute of Standards and Technology, the Federal Aviation Administration, the National Science Foundation Industry/University Cooperative Research Centers, and the Working Group in Quantitative NDE. This year's Review of Progress in QNDE was attended by approximately 450 participants from the U.S. and many foreign countries who presented over 360 papers. The meeting was divided into 36 sessions, with as many as four sessions running concurrently. The Review covered all phases of NDE research and development from fundamental investigations to engineering applications or inspection systems, and it included many important methods of inspection science from acoustics to x-rays. In the last eight to ten years, the Review has stabilized at about its current size, which most participants seem to agree is large enough to permit a full-scale overview of the latest developments, but still small enough to retain the collegial atmosphere which has marked the Review since its inception.
Download or read book Practical Residual Stress Measurement Methods written by Gary S. Schajer and published by John Wiley & Sons. This book was released on 2013-09-23 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introductory and intermediate level handbook written in pragmatic style to explain residual stresses and to provide straightforward guidance about practical measurement methods. Residual stresses play major roles in engineering structures, with highly beneficial effects when designed well, and catastrophic effects when ignored. With ever-increasing concern for product performance and reliability, there is an urgent need for a renewed assessment of traditional and modern measurement techniques. Success critically depends on being able to make the most practical and effective choice of measurement method for a given application. Practical Residual Stress Measurement Methods provides the reader with the information needed to understand key residual stress concepts and to make informed technical decisions about optimal choice of measurement technique. Each chapter, written by invited specialists, follows a focused and pragmatic format, with subsections describing the measurement principle, residual stress evaluation, practical measurement procedures, example applications, references and further reading. The chapter authors represent both international academia and industry. Each of them brings to their writing substantial hands-on experience and expertise in their chosen field. Fully illustrated throughout, the book provides a much-needed practical approach to residual stress measurements. The material presented is essential reading for industrial practitioners, academic researchers and interested students. Key features: • Presents an overview of the principal residual stress measurement methods, both destructive and non-destructive, with coverage of new techniques and modern enhancements of established techniques • Includes stand-alone chapters, each with its own figures, tables and list of references, and written by an invited team of international specialists
Download or read book Residual Stress Effects in Fatigue written by and published by . This book was released on 1982 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
