Download or read book An Analytic synthetic Approach Combining Mathematical Modeling and Experiments Towards an Understanding of Biofilm Systems written by Roland Bernhard Möhle and published by . This book was released on 2008 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Micro and Macroparticle enhanced cultivation of filamentous Lentzea aerocolonigenes for increased rebeccamycin production written by Kathrin Schrinner and published by Cuvillier Verlag. This book was released on 2020-12-28 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: The filamentous actinomycete Lentzea aerocolonigenes produces the antitumor antibiotic rebeccamycin. However, the complex morphology of actinomycetes leads to challenges during the cultivation often accompanied by low product titers. In the recent past, the to date low rebeccamycin titers were increased by particle addition to cultivations of L. aerocolonigenes. In this thesis the addition of micro-, macro- and adsorbent particles to cultivations of L. aerocolonigenes were investigated in more detail. Furthermore, the scale-up to a bubble-free bioreactor was conducted. The addition of glass microparticles (x50 = 7.9 μm, 10 g L-1) to shake flask cultivations increased the rebeccamycin titer up to 3.6-fold compared to an unsupplemented approach. Pellet slices showed the incorporation of microparticles. With different surface modifications of the microparticles, specific incorporation patterns of the microparticles appeared. The incorporation of microparticles causes looser and smaller pellets allowing an increased nutrient and oxygen supply in the pellet core. With addition of larger (glass) macroparticles (ø = 0.2 – 2.1 mm, 100 g L-1) mechanical stress was induced on the biopellets. The additional supplementation of 5 g L-1 soy lecithin and glass beads (ø = 969 μm, 100 g L-1) resulted in a rebeccamycin titer of 388 mg L-1, one of the highest rebeccamycin titers ever achieved. For the scale-up of L. aerocolonigenes cultivations a bubble-free membrane aeration system was developed. The tubular membrane aeration system can additionally be pressurized to increase the oxygen transfer. First cultivations of L. aerocolonigenes successfully provided 18 mg L-1 rebeccamycin, a concentration similar to that of unsupplemented shake flask cultivations. XAD adsorbent particles were added to cultivations to facilitate rebeccamycin recovery. However, the XAD particles additionally increased the rebeccamycin titer which was likely to be caused by the adsorption of the rebeccamycin precursor tryptophan to the resins which in turn directly transferred the tryptophan to the microorganism.
Download or read book Production of labyrinthopeptin A1 with Actinomadura namibiensis written by Sebastian Tesche and published by Cuvillier Verlag. This book was released on 2020-12-21 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: The filamentous actinomycete Actinomadura namibiensis is the only known producer of labyrinthopeptins, a class of ribosomally synthesized and posttranslationally modified peptides (RiPPs) displaying highly attractive bioactive properties. In order to increase the labyrinthopeptin A1 productivity in shaking flask cultivations of A. namibiensis, a new cultivation method called salt-enhanced cultivation was used. Compared to the unsupplemented control, labyrinthopeptin A1 productivity was enhanced the most by addition of 50 mM (NH4)2SO4, reaching a 7-fold higher yield of 325 mg L-1 within 10 cultivation days. Salt-enhanced cultivation affected growth and product formation mechanisms, cell morphology characteristics and rheological characteristics of cultivation broth. An image analysis method was developed to quantify both the macro-morphology (pellet size and shape) and the micro-morphology (hyphal network structure) of the heterogeneous filamentous biomass in detail. Productivity-related morphological parameters were in particular the size and circularity of pellets and the degree of hyphal interweaving (hyphal network spacing). It was shown that the time-dependent change in morphology linked to the rheological properties of the cultivation broth. The results presented in this work provide new insights into the cultivation aspects of A. namibiensis and illustrate the challenges on the way to a comprehensive understanding of the complex relationship between productivity, morphology and rheology in filamentous cultivations.
Download or read book Productive Biofilms written by Kai Muffler and published by Springer. This book was released on 2014-10-15 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book review series presents current trends in modern biotechnology. The aim is to cover all aspects of this interdisciplinary technology where knowledge, methods and expertise are required from chemistry, biochemistry, microbiology, genetics, chemical engineering and computer science. Volumes are organized topically and provide a comprehensive discussion of developments in the respective field over the past 3-5 years. The series also discusses new discoveries and applications. Special volumes are dedicated to selected topics which focus on new biotechnological products and new processes for their synthesis and purification. In general, special volumes are edited by well-known guest editors. The series editor and publisher will however always be pleased to receive suggestions and supplementary information. Manuscripts are accepted in English.
Download or read book Effect of fluid dynamics on pellet morphology and product formation of Aspergillus niger written by Pey-Jin Lin and published by Cuvillier Verlag. This book was released on 2012-08-13 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: The product formation of the biopellets of filamentous fungi, such as Aspergillus niger, is closely linked with the pellet morphology. Therefore, investigations were carried out to determine the influence of fluid dynamic conditions on the growth of fungal pellets. During the present study, important information about the evolution of morphological changes during the cultivation process in stirred tank reactors was gathered from cultivations at different volumetric power inputs by agitation and aeration. The quantification of the pellet morphology was accomplished by the digital image analysis and the laser diffraction technique tracing parameters like the pellet diameter and the pellet concentration. The property of the pellet surface structure was determined by the microscopic image analysis of the pellet slices and verified by sedimentation velocity measurements. Results revealed a notable variation in morphological data among pellets cultivated at different volumetric power inputs by agitation and aeration, by which the production yields of the model product glucoamylase were correspondingly altered. Furthermore, without raising the total energy input, by utilizing of the different impact of aeration- and agitation-induced volumetric power input on the fungal pellet morphology, the product formation could be consequentially improved. Die Produktbildung der Biopellets von filamentösen Pilzen, wie Aspergillus niger, ist eng mit der Pelletmorphologie verknüpft. Daher wurden Untersuchungen durchgeführt, um den Einfluss von fluiddynamischen Bedingungen auf das Wachstum von Pilzpellets zu bestimmen. In der vorliegenden Arbeit wurden wichtige Informationen über die Entwicklung der morphologischen Veränderungen von Kultivierungen bei verschiedenen Leistungseinträgen durch Rühren und Begasen gesammelt. Die Quantifizierung der Pelletmorphologie wurde, zur Erfassung verschiedener Parameter wie zum Beispiel des Pelletdurchmessers oder der Pelletkonzentration, mit Hilfe von Bildanalyse und Laserbeugung durchgeführt. Die Qualifizierung der Pelletoberflächenstruktur wurde durch die mikroskopische Bildanalyse von Pelletschnitten bestimmt und durch Sinkgeschwindigkeitsmessungen verifiziert. Die Ergebnisse zeigten eine bemerkenswerte Variation in morphologischen Daten bei Pellets, die unter verschiedenen Leistungseinträgen durch Rühren und Begasen kultiviert wurden, wodurch sich die Ausbeuten des Modellprodukts Glucoamylase entsprechend veränderten. Weiterhin konnte ohne Erhöhung des Gesamtenergieeintrags bei Variation des begasungs- und rührerinduzierten Leistungseintrags die Pelletmorphologie verändert und die Produktbildung verbessert werden.
Download or read book The Science and Applications of Synthetic and Systems Biology written by Institute of Medicine and published by National Academies Press. This book was released on 2011-12-30 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many potential applications of synthetic and systems biology are relevant to the challenges associated with the detection, surveillance, and responses to emerging and re-emerging infectious diseases. On March 14 and 15, 2011, the Institute of Medicine's (IOM's) Forum on Microbial Threats convened a public workshop in Washington, DC, to explore the current state of the science of synthetic biology, including its dependency on systems biology; discussed the different approaches that scientists are taking to engineer, or reengineer, biological systems; and discussed how the tools and approaches of synthetic and systems biology were being applied to mitigate the risks associated with emerging infectious diseases. The Science and Applications of Synthetic and Systems Biology is organized into sections as a topic-by-topic distillation of the presentations and discussions that took place at the workshop. Its purpose is to present information from relevant experience, to delineate a range of pivotal issues and their respective challenges, and to offer differing perspectives on the topic as discussed and described by the workshop participants. This report also includes a collection of individually authored papers and commentary.
Download or read book Mathematical Modeling of Biofilms written by IWA Task Group on Biofilm Modeling and published by IWA Publishing. This book was released on 2006-04-30 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 90% of bacterial biomass exists in the form of biofilms. The ability of bacteria to attach to surfaces and to form biofilms often is an important competitive advantage for them over bacteria growing in suspension. Some biofilms are "good" in natural and engineered systems; they are responsible for nutrient cycling in nature and are used to purify waters in engineering processes. Other biofilms are "bad" when they cause fouling and infections of humans and plants. Whether we want to promote good biofilms or eliminate bad biofilms, we need to understand how they work and what works to control them. Mathematical Modeling of Biofilms provides guidelines for the selection and use of mathematical models of biofilms. The whole range of existing models - from simple analytical expressions to complex numerical models - is covered. The application of the models for the solution of typical problems is demonstrated, and the performance of the models is tested in comparative studies. With the dramatic evolution of the computational capacity still going on, modeling tools for research and practice will become more and more significant in the next few years. This report provides the foundation to understand the models and to select the most appropriate one for a given use. Mathematical Modeling of Biofilms gives a state-of-the-art overview that is especially valuable for educating students, new biofilm researchers, and design engineers. Through a series of three benchmark problems, the report demonstrates how to use the different models and indicates when simple or highly complex models are most appropriate. This is the first report to give a quantitative comparison of existing biofilm models. The report supports model-based design of biofilm reactors. The report can be used as basis for teaching biofilm-system modeling. The report provides the foundation for researchers seeking to use biofilm modeling or to develop new biofilm models. Scientific and Technical Report No.18
Download or read book Biofilms in Wastewater Treatment written by Stefan Wuertz and published by IWA Publishing. This book was released on 2003-04-30 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: The central theme of the book is the flow of information from experimental approaches in biofilm research to simulation and modeling of complex wastewater systems. Probably the greatest challenge in wastewater research lies in using the methods and the results obtained in one scientific discipline to design intelligent experiments in other disciplines, and eventually to improve the knowledge base the practitioner needs to run wastewater treatment plants. The purpose of Biofilms in Wastewater Treatment is to provide engineers with the knowledge needed to apply the new insights gained by researchers. The authors provide an authoritative insight into the function of biofilms on a technical and on a lab-scale, cover some of the exciting new basic microbiological and wastewater engineering research involving molecular biology techniques and microscopy, and discuss recent attempts to predict the development of biofilms. This book is divided into 3 sections: Modeling and Simulation; Architecture, Population Structure and Function; and From Fundamentals to Practical Application, which all start with a scientific question. Individual chapters attempt to answer the question and present different angles of looking at problems. In addition there is an extensive glossary to familiarize the non-expert with unfamiliar terminology used by microbiologists and computational scientists. The colour plate section of this book can be downloaded by clicking here. (PDF Format 1 MB)
Download or read book Cumulated Index Medicus written by and published by . This book was released on 1999 with total page 1860 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling of Microscale Transport in Biological Processes written by Sid M. Becker and published by Academic Press. This book was released on 2017-01-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling of Microscale Transport in Biological Processes provides a compendium of recent advances in theoretical and computational modeling of biotransport phenomena at the microscale. The simulation strategies presented range from molecular to continuum models and consider both numerical and exact solution method approaches to coupled systems of equations. The biological processes covered in this book include digestion, molecular transport, microbial swimming, cilia mediated flow, microscale heat transfer, micro-vascular flow, vesicle dynamics, transport through bio-films and bio-membranes, and microscale growth dynamics. The book is written for an advanced academic research audience in the fields of engineering (encompassing biomedical, chemical, biological, mechanical, and electrical), biology and mathematics. Although written for, and by, expert researchers, each chapter provides a strong introductory section to ensure accessibility to readers at all levels.
Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1991 with total page 962 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1991 with total page 1210 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microbial Biofilms written by Hilary M. Lappin-Scott and published by Cambridge University Press. This book was released on 2003-09-18 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biochemistry and ecology of biofilms from industrial, medical and other viewpoints.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2008 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Prokaryotes written by Stanley Falkow and published by Springer Science & Business Media. This book was released on 2006-07-13 with total page 1003 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised Third Edition of The Prokaryotes, acclaimed as a classic reference in the field, offers new and updated articles by experts from around the world on taxa of relevance to medicine, ecology and industry. Entries combine phylogenetic and systematic data with insights into genetics, physiology and application. Existing entries have been revised to incorporate rapid progress and technological innovation. The new edition improves on the lucid presentation, logical layout and abundance of illustrations that readers rely on, adding color illustration throughout. Expanded to seven volumes in its print form, the new edition adds a new, searchable online version.
Download or read book Index to Theses with Abstracts Accepted for Higher Degrees by the Universities of Great Britain and Ireland and the Council for National Academic Awards written by and published by . This book was released on 2008 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Index Medicus written by and published by . This book was released on 2004 with total page 1666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vols. for 1963- include as pt. 2 of the Jan. issue: Medical subject headings.
