Download or read book An Alternative Scheme for Bagley Correction in Capillary Rheometry written by Hwai Hai Chiang and published by . This book was released on 1987 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 32 (thesis year 1987) a total of 12,483 theses titles from 22 Canadian and 176 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 32 reports theses submitted in 1987, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Download or read book Drexel Polymer Notes written by and published by . This book was released on 1988 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integration of CAD CAM for Injection molded Plastic Parts written by and published by . This book was released on 1987 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Simulation and Verification of Filling and Post filling Stages of the Injection molding Process written by Hwai Hai Chiang and published by . This book was released on 1989 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cornell Injection Molding Program Progress Report No 15 written by and published by . This book was released on 1990 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Three dimensional Simulations for the Filling Stage of the Polymer Injection Molding Process Using the Finite Element Method written by Sang-Woo Kim and published by . This book was released on 2005 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rheology and Non Newtonian Fluids written by Fridtjov Irgens and published by Springer Science & Business Media. This book was released on 2013-07-25 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a brief but thorough introduction to the fascinating subject of non-Newtonian fluids, their behavior and mechanical properties. After a brief introduction of what characterizes non-Newtonian fluids in Chapter 1 some phenomena characteristic of non-Newtonian fluids are presented in Chapter 2. The basic equations in fluid mechanics are discussed in Chapter 3. Deformation kinematics, the kinematics of shear flows, viscometric flows, and extensional flows are the topics in Chapter 4. Material functions characterizing the behavior of fluids in special flows are defined in Chapter 5. Generalized Newtonian fluids are the most common types of non-Newtonian fluids and are the subject in Chapter 6. Some linearly viscoelastic fluid models are presented in Chapter 7. In Chapter 8 the concept of tensors is utilized and advanced fluid models are introduced. The book is concluded with a variety of 26 problems. Solutions to the problems are ready for instructors
Download or read book Polymer Melt Fracture written by Rudy Koopmans and published by CRC Press. This book was released on 2010-08-03 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The continually growing plastics market consists of more than 250 million tons of product annually, making the recurring problem of polymer melt fracture an acute issue in the extrusion of these materials. Presenting a pictorial library of the different forms of melt fracture and real industrial extrusion melt fracture phenomena, Polymer Melt Fract
Download or read book Rheological Fundamentals of Polymer Processing written by J.A. Covas and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experts in rheology and polymer processing present up-to-date, fundamental and applied information on the rheological properties of polymers, in particular those relevant to processing, contributing to the physical understanding and the mathematical modelling of polymer processing sequences. Basic concepts of non-Newtonian fluid mechanics, micro-rheological modelling and constitutive modelling are reviewed, and rheological measurements are described. Topics with practical relevance are debated, such as linear viscoelasticity, converging and diverging flows, and the rheology of multiphase systems. Approximation methods are discussed for the computer modelling of polymer melt flow. Subsequently, polymer processing technologies are studied from both simulation and engineering perspectives. Mixing, crystallization and reactive processing aspects are also included. Audience: An integrated and complete view of polymer processing and rheology, important to institutions and individuals engaged in the characterisation, testing, compounding, modification and processing of polymeric materials. Can also support academic polymer processing engineering programs.
Download or read book Non Newtonian Flow and Applied Rheology written by R. P. Chhabra and published by Elsevier. This book was released on 2011-04-08 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book bridges the gap between the theoretical work of the rheologist, and the practical needs of those who have to design and operate the systems in which these materials are handled or processed. It is an established and important reference for senior level mechanical engineers, chemical and process engineers, as well as any engineer or scientist who needs to study or work with these fluids, including pharmaceutical engineers, mineral processing engineers, medical researchers, water and civil engineers. This new edition covers a considerably broader range of topics than its predecessor, including computational fluid dynamics modelling techniques, liquid/solid flows and applications to areas such as food processing, among others. * Written by two of the world's leading experts, this is the only dedicated non-Newtonian flow reference in print. * Since first publication significant advances have been made in almost all areas covered in this book, which are incorporated in the new edition, including developments in CFD and computational techniques, velocity profiles in pipes, liquid/solid flows and applications to food processing, and new heat/mass transfer methods and models. * Covers both basic rheology and the fluid mechanics of NN fluids ? a truly self-contained reference for anyone studying or working with the processing and handling of fluids
Download or read book Techniques in Rheological Measurement written by A.A. Collyer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: In an earlier book, Rheological Measurement (A. A. Collyer & D. W. Clegg, Elsevier Applied Science, 1988), the basic rheological methods of measurement presently used were discussed in the light of the basic underlying principles and current theories. The same approach is adopted in this companion book, which is concerned with some newer or more sophisticated techniques that have resulted from a fresh understanding of the subject, or as a result of improvement in computer control, data acquisition and computational power, or more simply from an industrial need, particularly with regard to process control. The first two chapters deal with the extensional flow properties of fluids and their measurement. This inclusion is in response to a greater awareness in industry of the importance of these flows. Chapter 3 intro duces and develops the subject of surface rheology and the measurement of its properties, again a subject of increasing significance. The methods of measurement of the dynamic mechanical properties of fluids and the calculation of the resulting rheological parameters are discussed in Chap ters 4-7 inclusive. The subject areas covered are: large-amplitude oscilla tory shear, a model for viscoelastic fluids and solids, a new method of measuring dynamic mechanical properties, particularly for curing sys tems, and the use of complex waveforms in dynamic mechanical analysis.
Download or read book Principles of Polymer Processing written by Zehev Tadmor and published by John Wiley & Sons. This book was released on 2013-12-02 with total page 1004 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly revised edition of the classic text on polymer processing The Second Edition brings the classic text on polymer processing thoroughly up to date with the latest fundamental developments in polymer processing, while retaining the critically acclaimed approach of the First Edition. Readers are provided with the complete panorama of polymer processing, starting with fundamental concepts through the latest current industry practices and future directions. All the chapters have been revised and updated, and four new chapters have been added to introduce the latest developments. Readers familiar with the First Edition will discover a host of new material, including: * Blend and alloy microstructuring * Twin screw-based melting and chaotic mixing mechanisms * Reactive processing * Devolatilization--theory, mechanisms, and industrial practice * Compounding--theory and industrial practice * The increasingly important role of computational fluid mechanics * A systematic approach to machine configuration design The Second Edition expands on the unique approach that distinguishes it from comparative texts. Rather than focus on specific processing methods, the authors assert that polymers have a similar experience in any processing machine and that these experiences can be described by a set of elementary processing steps that prepare the polymer for any of the shaping methods. On the other hand, the authors do emphasize the unique features of particular polymer processing methods and machines, including the particular elementary step and shaping mechanisms and geometrical solutions. Replete with problem sets and a solutions manual for instructors, this textbook is recommended for undergraduate and graduate students in chemical engineering and polymer and materials engineering and science. It will also prove invaluable for industry professionals as a fundamental polymer processing analysis and synthesis reference.
Download or read book Computational Rheology written by Robert G. Owens and published by World Scientific Publishing Company. This book was released on 2002 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work traces the development of numerical methods for non-Newtonian flows from the late 1960s to 2001. It begins with broad coverage of non-Newtonian fluids, including their mathematical modelling and analysis, and then specific computational techniques are discussed.
Download or read book Polymer Melt Rheology written by F N Cogswell and published by Elsevier. This book was released on 1981-01-01 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the ways in which melt flow behaviour can be exploited by the plastics engineer and technician for increased efficiency of processing operation, control of end product properties and selection and development of polymers for specific purposes. (reissued with minor corrections 1994)
Download or read book Carbon Black written by Jean-Baptiste Donnet and published by Routledge. This book was released on 2018-05-04 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this reference provides comprehensive examinations of developments in the processing and applications of carbon black, including the use of new analytical tools such as scanning tunnelling microscopy, Fourier transform infrared spectroscopy and inverse gas chromatography.;Completely rewritten and updated by numerous experts in the field to reflect the enormous growth of the field since the publication of the previous edition, Carbon Black: discusses the mechanism of carbon black formation based on recent advances such as the discovery of fullerenes; elucidates micro- and macrostructure morphology and other physical characteristics; outlines the fractal geometry of carbon black as a new approach to characterization; reviews the effect of carbon black on the electrical and thermal conductivity of filled polymers; delineates the applications of carbon black in elastomers, plastics, and zerographic toners; and surveys possible health consequences of exposure to carbon black.;With over 1200 literature citations, tables, and figures, this resource is intended for physical, polymer, surface and colloid chemists; chemical and plastics engineers; spectroscopists; materials scientists; occupational safety and health physicians; and upper-level undergraduate and graduate students in these disciplines.
Download or read book Food Polysaccharides and Their Applications written by Alistair M. Stephen and published by CRC Press. This book was released on 2016-04-19 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive in scope, Food Polysaccharides and Their Applications, Second Edition explains the production aspects and the chemical and physical properties of the main classes of polysaccharaides consumed as food, highlighting their nutritional value and their technological characteristics. Chapters in this new edition detail the source,
