Download or read book An Algebraic Geometry Based Approach to Decentralized Control written by Hyung Sik Shin and published by Stanford University. This book was released on 2011 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt: Decentralized control has been one of the important problems in systems and control engineering. Computing an optimal decentralized controller for general linear systems, however, is known to be a very challenging task. In particular, designing an optimal decentralized controller in the standard framework of a linear system with quadratic cost and Gaussian noise is well known to be extremely hard even in very simple and small sized problems. Because of this fact, previous work has focused on characterizing several different classes of problems for which an optimal decentralized controller may be efficiently computed. The set of quadratically invariant problems is one of the largest known class of such problems. This dissertation provides a novel, general, and powerful framework for addressing decentralized control by introducing the idea of using rational elimination theory of algebraic geometry. We show that, in certain cases, this approach reduces the set of closed-loop maps of decentralized control to the solution set of a collection of linear equations. We show how to use these linear equations to find an optimal decentralized controller. We also prove that if a system is quadratically invariant then under an appropriate technical condition the resulting elimination set is affine. We further illustrate that our approach can be well applied to a strictly larger class of decentralized control problem than the quadratically invariant one by presenting a simple example: the example shows that there are problems which are not quadratically invariant but for which the resulting elimination description is affine.
Download or read book Fault Diagnosis and Fault Tolerant Control Based on Adaptive Control Approach written by Qikun Shen and published by Springer. This book was released on 2017-02-14 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides recent theoretical developments in and practical applications of fault diagnosis and fault tolerant control for complex dynamical systems, including uncertain systems, linear and nonlinear systems. Combining adaptive control technique with other control methodologies, it investigates the problems of fault diagnosis and fault tolerant control for uncertain dynamic systems with or without time delay. As such, the book provides readers a solid understanding of fault diagnosis and fault tolerant control based on adaptive control technology. Given its depth and breadth, it is well suited for undergraduate and graduate courses on linear system theory, nonlinear system theory, fault diagnosis and fault tolerant control techniques. Further, it can be used as a reference source for academic research on fault diagnosis and fault tolerant control, and for postgraduates in the field of control theory and engineering.
Download or read book Decentralized Control of Complex Systems written by S?iljak and published by Academic Press. This book was released on 1991-01-28 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: Decentralized Control of Complex Systems
Download or read book Decentralized Control of Complex Systems written by Dragoslav D. Siljak and published by Courier Corporation. This book was released on 2013-07-24 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Starting with a graph-theoretic framework for structural modeling of complex systems, this text presents results related to robust stabilization via decentralized state feedback. Subsequent chapters explore optimization, output feedback, the manipulative power of graphs, overlapping decompositions and the underlying inclusion principle, and reliability design. An appendix provides efficient graph algorithms. 1991 edition.
Download or read book Advanced Mechatronics and MEMS Devices II written by Dan Zhang and published by Springer. This book was released on 2016-10-18 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the state-of-the-art technologies in mechatronics, robotics, and MEMS devices in order to improve their methodologies. It provides a follow-up to "Advanced Mechatronics and MEMS Devices" (2013) with an exploration of the most up-to-date technologies and their applications, shown through examples that give readers insights and lessons learned from actual projects. Researchers on mechatronics, robotics, and MEMS as well as graduate students in mechanical engineering will find chapters on: Fundamental design and working principles on MEMS accelerometers Innovative mobile technologies Force/tactile sensors development Control schemes for reconfigurable robotic systems Inertial microfluidics Piezoelectric force sensors and dynamic calibration techniques ...And more. Authors explore applications in the areas of agriculture, biomedicine, advanced manufacturing, and space. Micro-assembly for current and future industries is also considered, as well as the design and development of micro and intelligent manufacturing.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cooperative Control written by Vijay Kumar and published by Springer Science & Business Media. This book was released on 2004-10-20 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Are there universal principles of coordinated group motion and if so what might they be? This carefully edited book presents how natural groupings such as fish schools, bird flocks, deer herds etc. coordinate themselves and move so flawlessly, often without an apparent leader or any form of centralized control. It shows how the underlying principles of cooperative control may be used for groups of mobile autonomous agents to help enable a large group of autonomous robotic vehicles in the air, on land or sea or underwater, to collectively accomplish useful tasks such as distributed, adaptive scientific data gathering, search and rescue, or reconnaissance.
Download or read book Proceedings of the 24th IEEE Conference on Decision Control written by and published by . This book was released on 1985 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Game and Decision Theoretic Approach to Resilient Interdependent Network Analysis and Design written by Juntao Chen and published by Springer. This book was released on 2019-07-17 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: This brief introduces game- and decision-theoretical techniques for the analysis and design of resilient interdependent networks. It unites game and decision theory with network science to lay a system-theoretical foundation for understanding the resiliency of interdependent and heterogeneous network systems. The authors pay particular attention to critical infrastructure systems, such as electric power, water, transportation, and communications. They discuss how infrastructure networks are becoming increasingly interconnected as the integration of Internet of Things devices, and how a single-point failure in one network can propagate to other infrastructures, creating an enormous social and economic impact. The specific topics in the book include: · static and dynamic meta-network resilience game analysis and design; · optimal control of interdependent epidemics spreading over complex networks; and · applications to secure and resilient design of critical infrastructures. These topics are supported by up-to-date summaries of the authors’ recent research findings. The authors then discuss the future challenges and directions in the analysis and design of interdependent networks and explain the role of multi-disciplinary research has in computer science, engineering, public policy, and social sciences fields of study. The brief introduces new application areas in mathematics, economics, and system and control theory, and will be of interest to researchers and practitioners looking for new approaches to assess and mitigate risks in their systems and enhance their network resilience. A Game- and Decision-Theoretic Approach to Resilient Interdependent Network Analysis and Design also has self-contained chapters, which allows for multiple levels of reading by anyone with an interest in game and decision theory and network science.
Download or read book Algorithms in Algebraic Geometry written by Alicia Dickenstein and published by Springer Science & Business Media. This book was released on 2010-07-10 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade, there has been a burgeoning of activity in the design and implementation of algorithms for algebraic geometric computation. The workshop on Algorithms in Algebraic Geometry that was held in the framework of the IMA Annual Program Year in Applications of Algebraic Geometry by the Institute for Mathematics and Its Applications on September 2006 is one tangible indication of the interest. This volume of articles captures some of the spirit of the IMA workshop.
Download or read book Design and Application of Modern Synchronous Generator Excitation Systems written by Jicheng Li and published by John Wiley & Sons. This book was released on 2019-03-18 with total page 1197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Uses real world case studies to present the key technologies of design and application of the synchronous generator excitation system This book systematically introduces the important technologies of design and application of the synchronous generator excitation system, including the three-phase bridge rectifier circuit, diode rectifier for separate excitation, brushless excitation system and the static self-stimulation excitation system. It fuses discussions on specific topics and basic theories, providing a detailed description of the theories essential for synchronous generators in the analysis of excitation systems. Design and Application of Modern Synchronous Generator Excitation Systems provides a cutting-edge examination of excitation system, addressing conventional hydro-turbines, pumped storage units, steam turbines, and nuclear power units. It looks at the features and performance of the excitation system of the 700MW hydro-turbine deployed at the Three Gorges Hydropower Plant spanning the Yangtze River in China, as well as the working principle and start-up procedure of the static frequency converter (SFC) of pumped storage units. It also expounds on the composition of the excitation transformer, power rectifier, de-excitation equipment, and automatic excitation regulator—in addition to the performance features of the excitation system of conventional 600/1000MW turbines and the excitation system of the 1000MW nuclear power unit. Presents cutting-edge technologies of the excitation system from a unique engineering perspective Offers broad appeal to power system engineers who require a better understanding of excitation systems Addresses hydro-turbines, pumped storage units, steam turbines, and nuclear power units Provides an interdisciplinary examination of a range of applications Written by a senior expert in the area of excitation systems Written by an author with over 50 years' experience, Design and Application of Modern Synchronous Generator Excitation Systems is an excellent text that offers an interdisciplinary exposition for professionals, researchers, and academics alike.
Download or read book Software for Algebraic Geometry written by Michael E. Stillman and published by Springer Science & Business Media. This book was released on 2008-05-29 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Algorithms in algebraic geometry go hand in hand with software packages that implement them. Together they have established the modern field of computational algebraic geometry which has come to play a major role in both theoretical advances and applications. Over the past fifteen years, several excellent general purpose packages for computations in algebraic geometry have been developed, such as, CoCoA, Singular and Macaulay 2. While these packages evolve continuously, incorporating new mathematical advances, they both motivate and demand the creation of new mathematics and smarter algorithms. This volume reflects the workshop “Software for Algebraic Geometry” held in the week from 23 to 27 October 2006, as the second workshop in the thematic year on Applications of Algebraic Geometry at the IMA. The papers in this volume describe the software packages Bertini, PHClab, Gfan, DEMiCs, SYNAPS, TrIm, Gambit, ApaTools, and the application of Risa/Asir to a conjecture on multiple zeta values. They offer the reader a broad view of current trends in computational algebraic geometry through software development and applications.
Download or read book Efficient Modeling and Control of Large Scale Systems written by Javad Mohammadpour and published by Springer Science & Business Media. This book was released on 2010-06-23 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complexity and dynamic order of controlled engineering systems is constantly increasing. Complex large scale systems (where "large" reflects the system’s order and not necessarily its physical size) appear in many engineering fields, such as micro-electromechanics, manufacturing, aerospace, civil engineering and power engineering. Modeling of these systems often result in very high-order models imposing great challenges to the analysis, design and control problems. "Efficient Modeling and Control of Large-Scale Systems" compiles state-of-the-art contributions on recent analytical and computational methods for addressing model reduction, performance analysis and feedback control design for such systems. Also addressed at length are new theoretical developments, novel computational approaches and illustrative applications to various fields, along with: - An interdisciplinary focus emphasizing methods and approaches that can be commonly applied in various engineering fields -Examinations of applications in various fields including micro-electromechanical systems (MEMS), manufacturing processes, power networks, traffic control "Efficient Modeling and Control of Large-Scale Systems" is an ideal volume for engineers and researchers working in the fields of control and dynamic systems.
Download or read book Structurally Constrained Controllers written by Somayeh Sojoudi and published by Springer Science & Business Media. This book was released on 2011-03-08 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structurally Constrained Controllers: Analysis and Synthesis studies the control of interconnected systems with a particular application in network, power systems, flight formations, etc. It introduces four important problems regarding the control of such systems and then proposes proper techniques for solving them.
Download or read book Distributed Control of Robotic Networks written by Francesco Bullo and published by Princeton University Press. This book was released on 2009-07-06 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This self-contained introduction to the distributed control of robotic networks offers a distinctive blend of computer science and control theory. The book presents a broad set of tools for understanding coordination algorithms, determining their correctness, and assessing their complexity; and it analyzes various cooperative strategies for tasks such as consensus, rendezvous, connectivity maintenance, deployment, and boundary estimation. The unifying theme is a formal model for robotic networks that explicitly incorporates their communication, sensing, control, and processing capabilities--a model that in turn leads to a common formal language to describe and analyze coordination algorithms. Written for first- and second-year graduate students in control and robotics, the book will also be useful to researchers in control theory, robotics, distributed algorithms, and automata theory. The book provides explanations of the basic concepts and main results, as well as numerous examples and exercises. Self-contained exposition of graph-theoretic concepts, distributed algorithms, and complexity measures for processor networks with fixed interconnection topology and for robotic networks with position-dependent interconnection topology Detailed treatment of averaging and consensus algorithms interpreted as linear iterations on synchronous networks Introduction of geometric notions such as partitions, proximity graphs, and multicenter functions Detailed treatment of motion coordination algorithms for deployment, rendezvous, connectivity maintenance, and boundary estimation
Download or read book Systems Control Encyclopedia P Sim written by and published by . This book was released on 1987 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive reference work provides information on what systems thinking comprises and how it is being used to understand and to attack a wide spectrum of diverse problems ranging from, for example, the control of servo-mechanisms to applications of space technology.
Download or read book Index to IEEE Publications written by Institute of Electrical and Electronics Engineers and published by . This book was released on 1998 with total page 1270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues for 1973- cover the entire IEEE technical literature.
