Download or read book AMPERE AVERAGE CURRENT PHOTOINJECTOR AND ENERGY RECOVERY LINAC written by and published by . This book was released on 2004 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-power Free-Electron Lasers were made possible by advances in superconducting linac operated in an energy-recovery mode. In order to get to much higher power levels, say a fraction of a megawatt average power, many technological barriers are yet to be broken. We describe work on CW, high-current and high-brightness electron beams. This will include a description of a superconducting, laser-photocathode RF gun employing a new secondary-emission multiplying cathode, an accelerator cavity, both capable of producing of the order of one ampere average current and plans for an ERL based on these units.
Download or read book Ampere Average Current Photoinjector and Energy Recovery Linac written by K. Smith and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: High-power Free-Electron Lasers were made possible by advances in superconducting linac operated in an energy-recovery mode, as demonstrated by the spectacular success of the Jefferson Laboratory IR-Demo. In order to get to much higher power levels, say a fraction of a megawatt average power, many technological barriers are yet to be broken. BNL's Collider-Accelerator Department is pursuing some of these technologies for a different application, that of electron cooling of high-energy hadron beams. I will describe work on CW, high-current and high-brightness electron beams. This will include a description of a superconducting, laser-photocathode RF gun employing a new secondary-emission multiplying cathode and an accelerator cavity, both capable of producing of the order of one ampere average current.
Download or read book Journal of Nuclear Science and Technology written by and published by . This book was released on 2008 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes English language abstracts from Japanese articles in Nihon Genshiryoku Gakkai Shi (Journal of the Atomic Energy Society of Japan)
Download or read book Reviews of Accelerator Science and Technology Volume 3 written by Alex Chao and published by World Scientific. This book was released on 2010 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Each generation yielded growths in brightness and time resolution that were unimaginable just a few years earlier. In particular, the progression from the 3rd to 4th generation is a true revolution; the peak brilliance of coherent soft and hard x-rays has increased by 7-10 orders of magnitude, and the image resolution has reached the angstrom (1 [symbol] = 10-10 meters) and femto-second (1 fs = 10-15 second) scales. These impressive capabilities have fostered fundamental scientific advances and led to an explosion of numerous possibilities in many important research areas including material science, chemistry, molecular biology and the life sciences. Even more remarkably, this field of photon source invention and development shows no signs of slowing down. Studies have already been started on the next generation of x-ray sources, which would have a time resolution in the atto-second (1 as = 10-18 second) regime, comparable to the time of electron motion inside atoms.
Download or read book Scientific Assessment of High Power Free Electron Laser Technology written by National Research Council and published by National Academies Press. This book was released on 2009-03-06 with total page 67 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a scientific assessment of free-electron-laser technology for naval applications. The charge from the Office of Naval Research was to assess whether the desired performance capabilities are achievable or whether fundamental limitations will prevent them from being realized. The present study identifies the highest-priority scientific and technical issues that must be resolved along the development path to achieve a megawatt-class free-electron laser. In accordance with the charge, the committee considered (and briefly describes) trade-offs between free-electron lasers and other types of lasers and weapon systems to show the advantages free-electron lasers offer over other types of systems for naval applications as well as their drawbacks. The primary advantages of free-electron lasers are associated with their energy delivery at the speed of light, selectable wavelength, and all-electric nature, while the trade-offs for free-electron lasers are their size, complexity, and relative robustness. Also, Despite the significant technical progress made in the development of high-average-power free-electron lasers, difficult technical challenges remain to be addressed in order to advance from present capability to megawatt-class power levels.
Download or read book Reviews Of Accelerator Science And Technology Volume 3 Accelerators As Photon Sources written by Alexander Wu Chao and published by World Scientific. This book was released on 2011-01-20 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last half century we have witnessed tremendous progress in the production of high-quality photons by electrons in accelerators. This dramatic evolution has seen four generations of accelerators as photon sources. The 1st generation used the electron storage rings built primarily for high-energy physics experiments, and the synchrotron radiation from the bending magnets was used parasitically. The 2nd generation involved rings dedicated to synchrotron radiation applications, with the radiation again from the bending magnets. The 3rd generation, currently the workhorse of these photon sources, is dedicated advanced storage rings that employ not only bending magnets but also insertion devices (wigglers and undulators) as the source of the radiation. The 4th generation, which is now entering operation, is photon sources based on the free electron laser (FEL), an invention made in the early 1970s.Each generation yielded growths in brightness and time resolution that were unimaginable just a few years earlier. In particular, the progression from the 3rd to 4th generation is a true revolution; the peak brilliance of coherent soft and hard x-rays has increased by 7-10 orders of magnitude, and the image resolution has reached the angstrom (1 Å = 10-10 meters) and femto-second (1 fs = 10-15 second) scales. These impressive capabilities have fostered fundamental scientific advances and led to an explosion of numerous possibilities in many important research areas including material science, chemistry, molecular biology and the life sciences. Even more remarkably, this field of photon source invention and development shows no signs of slowing down. Studies have already been started on the next generation of x-ray sources, which would have a time resolution in the atto-second (1 as = 10-18 second) regime, comparable to the time of electron motion inside atoms. It can be fully expected that these photon sources will stand out among the most powerful future science research tools. The physics community as well as the entire scientific community will hear of many pioneering and groundbreaking research results using these sources in the coming years.This volume contains fifteen articles, all written by leading scientists in their respective fields. It is aimed at the designers, builders and users of accelerator-based photon sources as well as general audience who are interested in this topic.
Download or read book Synchrotron Light Sources and Free Electron Lasers written by Eberhard J. Jaeschke and published by Springer. This book was released on 2016-05-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardly any other discovery of the nineteenth century did have such an impact on science and technology as Wilhelm Conrad Röntgen’s seminal find of the X-rays. X-ray tubes soon made their way as excellent instruments for numerous applications in medicine, biology, materials science and testing, chemistry and public security. Developing new radiation sources with higher brilliance and much extended spectral range resulted in stunning developments like the electron synchrotron and electron storage ring and the freeelectron laser. This handbook highlights these developments in fifty chapters. The reader is given not only an inside view of exciting science areas but also of design concepts for the most advanced light sources. The theory of synchrotron radiation and of the freeelectron laser, design examples and the technology basis are presented. The handbook presents advanced concepts like seeding and harmonic generation, the booming field of Terahertz radiation sources and upcoming brilliant light sources driven by laser-plasma accelerators. The applications of the most advanced light sources and the advent of nanobeams and fully coherent x-rays allow experiments from which scientists in the past could not even dream. Examples are the diffraction with nanometer resolution, imaging with a full 3D reconstruction of the object from a diffraction pattern, measuring the disorder in liquids with high spatial and temporal resolution. The 20th century was dedicated to the development and improvement of synchrotron light sources with an ever ongoing increase of brilliance. With ultrahigh brilliance sources, the 21st century will be the century of x-ray lasers and their applications. Thus, we are already close to the dream of condensed matter and biophysics: imaging single (macro)molecules and measuring their dynamics on the femtosecond timescale to produce movies with atomic resolution.
Download or read book R D ERL written by and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the key components for the superconducting RF Energy Recovery Linac, (ERL) under development in the Collider Accelerator Department at Brookhaven National Laboratory, is the Linac cavity and cryomodule. The cavity is a 5 cell accelerating cavity designed to operate at 703.75 MHz, and to accelerate 2 MeV electrons from the photoinjector up to 15-20 MeV, allow them to make a single pass around the ERL loop and then decelerate them back down to 2 MeV prior to sending them to the beam dump. This cavity was designed by Rama Calaga and Ilan Ben-Zvi at BNL and fabricated by Advanced Energy Systems in Medford, NY. The cavity was then delivered to Thomas Jefferson Laboratory in VA for chemical processing, testing and assembly of the hermetic string assembly suitable for shipment back to BNL. Once at BNL it was built into a complete cryomodule, installed in the ERL test facility and commissioned. This paper will review the key components of the cavity and cryomodule and discuss the present status of the cryomodule commissioning. The BNL 5 cell accelerating cavity has been designed for use in our high average current Energy Recovery Linac, a proof of principle machine to demonstrate key components necessary for the future upgrades to RHIC as well as applications for future ampere class high current, high brightness ERL programs. The cavity has been tested at greater than 20 MV/m with a Q0 of 1e1°, meeting the design specifications for use at full energy in the ERL. This paper will review the cavity design and specifications as well as the RF measurements that have been made both in the VTA at Jefferson Lab as well as during the commissioning in the ERL test cave at BNL. Finally the future plan for cavity testing and measurements prior to its use in ERL operations will be reviewed. The general physics parameters for the cavity can be found in table 1, and the reader is referred to Rama Calaga's Thesis for a much more detailed review of the cavity geometry and design. There are several different parameters that make this cavity design very unique. The first is the 17 cm diameter cavity iris and 24 cm diameter beampipe. The geometry, along with the cavity design, results in a cavity with no trapped higher order modes, and a BBU threshold is> 2 amperes. Another feature of the geometry of this particular cavity is the fact that the lowest mechanical resonance is at H"00 Hz, thus making it much less susceptible to microphonics.
Download or read book Brilliant Light in Life and Material Sciences written by Vasili Tsakanov and published by Springer Science & Business Media. This book was released on 2007-03-31 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains an excellent overview of the status and highlights of brilliant light facilities and their applications in biology, chemistry, medicine, materials and environmental sciences. Overview papers on diverse fields of research by leading experts are accompanied by the highlights in the near and long-term perspectives of brilliant X-Ray photon beam usage for fundamental and applied research.
Download or read book Microwave Electronics written by Andrey D. Grigoriev and published by Springer. This book was released on 2018-02-17 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the physical basis of microwave electronics and related topics, such as microwave vacuum and microwave semiconductor devices. It comprehensively discusses the main types of microwave vacuum and microwave semiconductor devices, their principles of action, theory, parameters and characteristics, as well as ways of increasing the frequency limit of various devices up to the terahertz frequency band. Further, it applies a unified approach to describe charged particle interaction within electromagnetic fields and the motion laws of charged particles in various media. The book is intended as a manual for researchers and engineers, as well as advanced undergraduate and graduate students.
Download or read book Physics Briefs written by and published by . This book was released on 1994 with total page 1162 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrostatic Accelerators written by Ragnar Hellborg and published by Springer Science & Business Media. This book was released on 2005-04-21 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrostatic accelerators are an important and widespread subgroup within the broad spectrum of modern, large particle acceleration devices. They are specifically designed for applications that require high-quality ion beams in terms of energy stability and emittance at comparatively low energies (a few MeV). Their ability to accelerate virtually any kind of ion over a continuously tunable range of energies makes them a highly versatile tool for investigations in many research fields including, but not limited to, atomic and nuclear spectroscopy, heavy ion reactions, accelerator mass spectroscopy as well as ion-beam analysis and modification. The book is divided into three parts. The first part concisely introduces the field of accelerator technology and techniques that emphasize their major modern applications. The second part treats the electrostatic accelerator per se: its construction and operational principles as well as its maintenance. The third part covers all relevant applications in which electrostatic accelerators are the preferred tool for accelerator-based investigations. Since some topics are common to all types of accelerators, Electrostatic Accelerators will also be of value for those more familiar with other types of accelerators.
Download or read book Electro Optics Handbook written by Ronald Waynant and published by McGraw Hill Professional. This book was released on 2000-04-06 with total page 1006 pages. Available in PDF, EPUB and Kindle. Book excerpt: All-inclusive opto electronics guide A valuable "must-have" tool for electronic and optical engineers, this Handbook is the only single-volume, tell-it-all guide to the use of optical devices and light in electronics systems. Developed by a towering figure in the field, this manual familiarizes you with UV, VUV and X-Ray lasers; visible, solid-state, semiconductor and infrared gas lasers; FEL and ultrashort laser pulses; visible and infrared optical materials; infrared and imaging detectors; optical fibers and fiber optic sensors; holography; laser spectroscopy and photochemistry; high resolution lithography for optoelectronics; and much more. In this up-to-the-minute edition you'll find new chapters on optical communications, electro-optic devices, and high intensity optical fields, in addition to extensively updated material throughout, and abundant charts, diagrams and data tables.
Download or read book Handbook of Accelerator Physics and Engineering written by Alexander Wu Chao and published by World Scientific. This book was released on 2013 with total page 849 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by internationally recognized authorities in the field, this expanded and updated new edition of the bestselling Handbook, containing more than 100 new articles, is aimed at the design and operation of modern particle accelerators. It is intended as a vade mecum for professional engineers and physicists engaged in these subjects. With a collection of more than 2000 equations, 300 illustrations and 500 graphs and tables, here one will find, in addition to the common formulae of previous compilations, hard-to-find, specialized formulae, recipes and material data pooled from the lifetime experience of many of the world''s most able practitioners of the art and science of accelerators.The eight chapters include both theoretical and practical matters as well as an extensive glossary of accelerator types. Chapters on beam dynamics and electromagnetic and nuclear interactions deal with linear and nonlinear single particle and collective effects including spin motion, beam-environment, beam-beam, beam-electron, beam-ion and intrabeam interactions. The impedance concept and related calculations are dealt with at length as are the instabilities associated with the various interactions mentioned. A chapter on operational considerations includes discussions on the assessment and correction of orbit and optics errors, real-time feedbacks, generation of short photon pulses, bunch compression, tuning of normal and superconducting linacs, energy recovery linacs, free electron lasers, cooling, space-charge compensation, brightness of light sources, collider luminosity optimization and collision schemes. Chapters on mechanical and electrical considerations present material data and important aspects of component design including heat transfer and refrigeration. Hardware systems for particle sources, feedback systems, confinement and acceleration (both normal conducting and superconducting) receive detailed treatment in a subsystems chapter, beam measurement techniques and apparatus being treated therein as well. The closing chapter gives data and methods for radiation protection computations as well as much data on radiation damage to various materials and devices.A detailed name and subject index is provided together with reliable references to the literature where the most detailed information available on all subjects treated can be found.
Download or read book The Physics of Free Electron Lasers written by E.L. Saldin and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Free Electron Laser (FEL) will be a crucial tool for research and industrial applications. This book describes the physical fundamentals of FELs on the basis of classical mechanics, electrodynamics, and the kinetic theory of charged particle beams, and will be suitable for graduate students and scientists alike. After a short introduction, the book discusses the theory of the FEL amplifier and oscillator, diffraction effects in the amplifier, and waveguide FEL.
Download or read book An Engineering Guide to Photoinjectors written by Triveni Rao and published by Createspace Independent Pub. This book was released on 2013-04-02 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introduction to the basic theory and engineering of advanced electron beam sources known as photoinjectors. Photoinjectors produce relativistic electrons for exciting new devices such as x-ray free electron lasers and the polarized beams for very high energy physics linear colliders. The chapters are written by renowned experts in the field who share their working knowledge of the technologies needed for designing and building photoinjectors.
Download or read book Explosively Driven Pulsed Power written by Andreas A. Neuber and published by Springer Science & Business Media. This book was released on 2005-11-04 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the basic operating principles of Helical Magnetic Flux Compression Generators are easy to understand, the details of their construction and performance limits have been described only in government reports, many of them classified. Conferences in the field of flux compression are also dominated by contributions from government (US and foreign) laboratories. And the government-sponsored research has usually been concerned with very large generators with explosive charges that require elaborate facilities and safety arrangements. This book emphasizes research into small generators (less than 500 grams of high explosives) and explains in detail the physical fundamentals, construction details, and parameter-variation effects related to them.
