Download or read book The Deposition of AlN Thin Films Their Characterization and the Fabrication of Surface Acoustic Wave Devices written by Charlee Fansler and published by . This book was released on 2007 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book MEMS Design Fabrication Characterization and Packaging written by Uwe F. W. Behringer and published by SPIE-International Society for Optical Engineering. This book was released on 2001 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Surface Acoustic Wave Devices written by Valeri G. Dneprovski and published by Nova Science Publishers. This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface acoustic waves (SAWs) demonstrate simplicity of their excitation and receipt, as well as their availability to all propagation ways of signal branching and processing. SAW devices are divided into several main classes: filters for signal processing at intermediate frequencies, delay lines, resonators, filters with low losses for the input circuits of receiver, and antenna duplexers for the connected receivers. The SAW devices are not only able to conduct an effective signal processing, but also serve as a basis for multi-subsystems (matched filtering, signal processing, real-time Fourier transform processors, etc.). Additionally, SAW filters help scientists to realise the wide variety of frequency characteristics. Besides their unique electrical characteristics, SAW devices favorably differ from their analogs in small size, mechanical strength and high reliability, due to the quality of raw materials and their processing. The use of the photolithography and the achievements of group microelectronic technology in their production allow a researcher to achieve good reproducibility of parameters at relatively low cost. In addition, currently SAW devices are widely used in various sensors based on the SAW radio frequency identification. This book presents an attempt to generalise a multi-year experience on R&D of SAW devices. It develops original approaches directed at discovering solutions of technical problems, as development of various SAW devices are patented in Russia. Moreover, the book presents some experimental and theoretical research results.

Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2540 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Acoustic Waves written by Marco G. Beghi and published by BoD – Books on Demand. This book was released on 2011-11-14 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concept of acoustic wave is a pervasive one, which emerges in any type of medium, from solids to plasmas, at length and time scales ranging from sub-micrometric layers in microdevices to seismic waves in the Sun's interior. This book presents several aspects of the active research ongoing in this field. Theoretical efforts are leading to a deeper understanding of phenomena, also in complicated environments like the solar surface boundary. Acoustic waves are a flexible probe to investigate the properties of very different systems, from thin inorganic layers to ripening cheese to biological systems. Acoustic waves are also a tool to manipulate matter, from the delicate evaporation of biomolecules to be analysed, to the phase transitions induced by intense shock waves. And a whole class of widespread microdevices, including filters and sensors, is based on the behaviour of acoustic waves propagating in thin layers. The search for better performances is driving to new materials for these devices, and to more refined tools for their analysis.

Download or read book Integrated Electronics on Aluminum Nitride written by Reet Chaudhuri and published by Springer Nature. This book was released on 2022-12-06 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis outlines the principles, device physics, and technological applications of electronics based on the ultra-wide bandgap semiconductor aluminum nitride. It discusses the basic principles of electrostatics and transport properties of polarization-induced two-dimensional electron and hole channels in semiconductor heterostructures based on aluminum nitride. It explains the discovery of high-density two-dimensional hole gases in undoped heterojunctions, and shows how these high conductivity n- and p-type channels are used for high performance nFETs and pFETs, along with wide bandgap RF, mm-wave, and CMOS applications. The thesis goes on to discuss how the several material advantages of aluminum nitride, such as its high thermal conductivity and piezoelectric coefficient, enable not just high performance of transistors, but also monolithic integration of passive elements such as high frequency filters, enabling a new form factor for integrated RF electronics.

Download or read book Current Research in Pulsed Laser Deposition written by Liviu Duta and published by MDPI. This book was released on 2021-08-30 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite its limitation in terms of surface covered area, the PLD technique still gathers interest among researchers by offering endless possibilities for tuning thin film composition and enhancing their properties of interest due to: (i) the easiness of a stoichiometric transfer even for very complex target materials, (ii) high adherence of the deposited structures to the substrate, (iii) controlled degree of phase, crystallinity, and thickness of deposited coatings, (iv) versatility of the experimental set-up which allows for simultaneous ablation of multiple targets resulting in combinatorial maps or consecutive ablation of multiple targets producing multi-layered structures, and (v) adjustment of the number of laser pulses, resulting in either a spread of nanoparticles, islands of materials or a complete covering of a surface. Moreover, a variation of PLD, known as Matrix Assisted Pulsed Laser Evaporation, allows for deposition of organic materials, ranging from polymers to proteins and even living cells, otherwise difficult to transfer unaltered in the form of thin films by other techniques. Furthermore, the use of laser light as transfer agent ensures purity of films and pulse-to-pulse deposition allows for an unprecedented control of film thickness at the nm level. This Special Issue is a collection of state-of-the art research papers and reviews in which the topics of interest are devoted to thin film synthesis by PLD and MAPLE, for numerous research and industry field applications, such as bio-active coatings for medical implants and hard, protective coatings for cutting and drilling tools withstanding high friction and elevated temperatures, sensors, solar cells, lithography, magnetic devices, energy-storage and conversion devices, controlled drug delivery and in situ microstructuring for boosting of surface properties.

Download or read book Synthesis Properties and Applications of Ultrananocrystalline Diamond written by Dieter M. Gruen and published by Springer Science & Business Media. This book was released on 2006-03-30 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: We are pleased to present the Proceedings of the NATO Advanced Research Workshop “Syntheses, Properties and Applications of Ultrananocrystalline Diamond” which was held June 7-10, 2004 in St. Petersburg, Russia. The main goal of the Workshop was to provide a forum for the intensive exchange of opinions between scientists from Russia and NATO countries in order to give additional impetus to the development of the science and applications of a new carbon nanostructure, called ultrananocrystalline diamond (UNCD) composed of 2-5 nm crystallites. There are two forms of UNCD, dispersed particles and films. The two communities of researchers working on these two forms of UNCD have hitherto lacked a common forum in which to explore areas of scientific and technological overlap. As a consequence, the two fields have up to now developed independently of each other. The time had clearly come to remedy this situation in order to be able to take full advantage of the enormous potential for societal benefits to be derived from exploiting the synergistic relationships between UNCD dispersed particulates and UNCD films. The NATO sponsored ARW therefore occurred in a very timely manner and was successful in beginning the desired dialogue, a precondition for making progress toward the above stated goal. The discovery of UNCD completes a triadof nanostructured carbonswhich includes fullerenes and nanotubes.

Download or read book Research Perspectives on Functional Micro and Nanoscale Coatings written by Zuzuarregui, Ana and published by IGI Global. This book was released on 2016-04-11 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Just as chemistry is a part of our daily lives, functional coatings can be found in almost every object, gadget or device you can see or touch. However, in the last 20 years the advances made in the preparation of different functional coatings with diverse compositions have allowed the development of nanoscale coatings that are more cost-effective and environmentally conscious than traditional coatings. Research Perspectives on Functional Micro- and Nanoscale Coatings highlights critical research on preparation methods, modification, organization, and utilization of functional coatings in micro, nano, and biotechnology. Emphasizing emerging developments and global research perspectives, this publication is a pivotal resource for engineers, researchers, and graduate-level students interested in learning about emerging developments in functional coatings and nanotechnology.

Download or read book Advanced Materials in Microwaves and Optics written by David Wang and published by Trans Tech Publications Ltd. This book was released on 2012-01-24 with total page 871 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2011 International Conference on Advanced Materials in Microwaves and Optics (AMMO 2011), September 30-October 1, 2011, Bangkok, Thailand

Download or read book Thermal Spray 2004 written by and published by ASM International. This book was released on 2004-01-01 with total page 1147 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 1102 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Surface Acoustic Wave Devices in Telecommunications written by Ken-Ya Hashimoto and published by Springer Science & Business Media. This book was released on 2000-06-21 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface acoustic wave (SAW) devices are widely used in mobile communications, a rapidly evolving market. This book gives an overview on the latest SAW technologies with an emphasis on the design and simulation of devices, such as resonator-based devices employing the SH-type leaky SAW.

Download or read book Acoustic Waves written by Don Dissanayake and published by BoD – Books on Demand. This book was released on 2010-09-28 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: SAW devices are widely used in multitude of device concepts mainly in MEMS and communication electronics. As such, SAW based micro sensors, actuators and communication electronic devices are well known applications of SAW technology. For example, SAW based passive micro sensors are capable of measuring physical properties such as temperature, pressure, variation in chemical properties, and SAW based communication devices perform a range of signal processing functions, such as delay lines, filters, resonators, pulse compressors, and convolvers. In recent decades, SAW based low-powered actuators and microfluidic devices have significantly added a new dimension to SAW technology. This book consists of 20 exciting chapters composed by researchers and engineers active in the field of SAW technology, biomedical and other related engineering disciplines. The topics range from basic SAW theory, materials and phenomena to advanced applications such as sensors actuators, and communication systems. As such, in addition to theoretical analysis and numerical modelling such as Finite Element Modelling (FEM) and Finite Difference Methods (FDM) of SAW devices, SAW based actuators and micro motors, and SAW based micro sensors are some of the exciting applications presented in this book. This collection of up-to-date information and research outcomes on SAW technology will be of great interest, not only to all those working in SAW based technology, but also to many more who stand to benefit from an insight into the rich opportunities that this technology has to offer, especially to develop advanced, low-powered biomedical implants and passive communication devices.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1989 with total page 1148 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modeling and Measurement Methods for Acoustic Waves and for Acoustic Microdevices written by Marco G. Beghi and published by BoD – Books on Demand. This book was released on 2013-08-28 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acoustics is a mature field which enjoys a never ending youth. New developments are induced by either the search for a better understanding, or by technological innovations. Micro-fabrication techniques introduced a whole new class of microdevices, which exploit acoustic waves for various tasks, and in particular for information processing and for sensing purposes. Performance improvements are achievable by better modelling tools, able to deal with more complex configurations, and by more refined techniques of fabrication and of integration in technological systems, like wireless communications. Several chapters of this book deal with modelling and fabrication techniques for microdevices, including unconventional phenomena and configurations. But this is far from exhausting the research lines in acoustics. Theoretical analyses and modelling techniques are presented, for phenomena ranging from the detection of cracks to the acoustics of the oceans. Measurement methods are also discussed, which probe by acoustic waves the properties of widely different systems.

Download or read book Optoelectronic Devices written by M Razeghi and published by Elsevier. This book was released on 2004 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tremendous progress has been made in the last few years in the growth, doping and processing technologies of the wide bandgap semiconductors. As a result, this class of materials now holds significant promis for semiconductor electronics in a broad range of applications. The principal driver for the current revival of interest in III-V Nitrides is their potential use in high power, high temperature, high frequency and optical devices resistant to radiation damage. This book provides a wide number of optoelectronic applications of III-V nitrides and covers the entire process from growth to devices and applications making it essential reading for those working in the semiconductors or microelectronics. Broad review of optoelectronic applications of III-V nitrides