Download or read book Introduction to Aluminum Alloys and Tempers written by J. Gilbert Kaufman and published by ASM International. This book was released on 2000 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Examines characteristics of wrought and cast aluminum alloys, then presents basic aluminum alloy and temper designation systems, as developed by the Aluminum Association, and explains them with examples. Wrought and cast aluminum designations are treated in a similar fashion. Processes used to produce aluminum alloy products are described briefly, and representative applications for aluminum alloys and tempers are detailed, in areas such as electrical markets, building and construction, marine and rail transportation, packaging, and petroleum and chemical industry components. A final chapter presents 65 pages of bandw micrographs illustrating the microstructure of a range of aluminum alloys and tempers, to assist in understanding consequences of applying the production technology implied by the temper designations. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Properties of Aluminum Alloys written by John Gilbert Kaufman and published by ASM International. This book was released on 2008-01-01 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of data collected and maintained for many years as the property of a large aluminum company, which decided in 1997 to make it available to other engineers and materials specialists. In tabular form, presents data on the tensile and creep properties of eight species of wrought alloys and five species of cast alloys in the various shapes used in applications. Then looks at the fatigue data for several alloys under a range of conditions and loads. The data represent the typical or average findings, and though some were developed years ago, the collection is the largest and most detailed available. There is no index.
Download or read book Aluminum and Aluminum Alloys written by Joseph R. Davis and published by ASM International. This book was released on 1993-01-01 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: This one-stop reference is a tremendous value and time saver for engineers, designers and researchers. Emerging technologies, including aluminum metal-matrix composites, are combined with all the essential aluminum information from the ASM Handbook series (with updated statistical information).
Download or read book Aluminum Alloy Castings written by John Gilbert Kaufman and published by ASM International. This book was released on 2004-01-01 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: J. G. (Gil) Kaufman is currently president of his consulting company, Kaufman Associates.
Download or read book Properties of Aluminum Alloys written by John Gilbert Kaufman and published by ASM International. This book was released on 1999-01-01 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of data collected and maintained for many years as the property of a large aluminum company, which decided in 1997 to make it available to other engineers and materials specialists. In tabular form, presents data on the tensile and creep properties of eight species of wrought alloys and five species of cast alloys in the various shapes used in applications. Then looks at the fatigue data for several alloys under a range of conditions and loads. The data represent the typical or average findings, and though some were developed years ago, the collection is the largest and most detailed available. There is no index.
Download or read book Aluminum Alloys written by L. F. Mondolfo and published by Elsevier. This book was released on 2013-09-24 with total page 986 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminum Alloys: Structure and Properties is a reference book that provides a concise description of the practical aspects of structures and properties of aluminum alloys. The book first covers the traits of pure and commercial aluminum, which include the composition, physical and thermal properties, and radiation. Next, the text covers the various classifications of aluminum alloys, such as binary, ternary, and commercial alloys. The text will be of great use to metallurgical engineers, inorganic chemists, and other researchers and practitioners who deal with aluminum and its alloys.
Download or read book Aluminum Lithium Alloys written by N Eswara Prasad and published by Butterworth-Heinemann. This book was released on 2013-09-20 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because lithium is the least dense elemental metal, materials scientists and engineers have been working for decades to develop a commercially viable aluminum-lithium (Al-Li) alloy that would be even lighter and stiffer than other aluminum alloys. The first two generations of Al-Li alloys tended to suffer from several problems, including poor ductility and fracture toughness; unreliable properties, fatigue and fracture resistance; and unreliable corrosion resistance. Now, new third generation Al-Li alloys with significantly reduced lithium content and other improvements are promising a revival for Al-Li applications in modern aircraft and aerospace vehicles. Over the last few years, these newer Al-Li alloys have attracted increasing global interest for widespread applications in the aerospace industry largely because of soaring fuel costs and the development of a new generation of civil and military aircraft. This contributed book, featuring many of the top researchers in the field, is the first up-to-date international reference for Al-Li material research, alloy development, structural design and aerospace systems engineering. - Provides a complete treatment of the new generation of low-density AL-Li alloys, including microstructure, mechanical behavoir, processing and applications - Covers the history of earlier generation AL-Li alloys, their basic problems, why they were never widely used, and why the new third generation Al-Li alloys could eventually replace not only traditional aluminum alloys but more expensive composite materials - Contains two full chapters devoted to applications in the aircraft and aerospace fields, where the lighter, stronger Al-Li alloys mean better performing, more fuel-efficient aircraft
Download or read book Casting Aluminum Alloys written by Michael V Glazoff and published by Butterworth-Heinemann. This book was released on 2018-09-03 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Casting Aluminum Alloys, Second Edition, the follow up to the fall 2007 work on the structure, properties, thermal resistance, corrosion and fatigue of aluminum alloys in industrial manufacturing, discusses findings from the past decade, including sections on new casting alloys, novel casting technologies, and new methods of alloys design. The book also includes other hot topics, such as the implementation of computational technologies for the calculation of phase equilibria and thermodynamic properties of alloys, the development of software for calculation of diffusion processes in aluminum alloys, computational modeling of solidification microstructure and texture evolution of multi-component aluminum materials. In addition to changes in computational predictive abilities, there is a review of novel casting aluminum alloy compositions and properties, as well as descriptions of new casting technologies and updates to coverage on the mechanical properties of aluminum casting alloys. - Presents a discussion of thermodynamic calculations used for assessing non-equilibrium solidifications of casting aluminum alloys - Expands coverage of mathematical models for alloy mechanical properties, helping facilitate the selection of the best prospective candidate for new alloy development - Contains a new section that describes the self-consistent evaluation of phase equilibria and thermodynamic properties of aluminum alloys
Download or read book The Welding of Aluminium and Its Alloys written by G Mathers and published by Elsevier. This book was released on 2002-09-24 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Welding of Aluminium and its Alloys is a practical user's guide to all aspects of welding aluminium and aluminium alloys. It provides a basic understanding of the metallurgical principles involved showing how alloys achieve their strength and how the process of welding can affect these properties. The book is intended to provide engineers with perhaps little prior understanding of metallurgy and only a brief acquaintance with the welding processes involved with a concise and effective reference to the subject.It is intended as a practical guide for the Welding Engineer and covers weldability of aluminium alloys; process descriptions, advantages, limitations, proposed weld parameters, health and safety issues; preparation for welding, quality assurance and quality control issues along with problem solving.The book includes sections on parent metal storage and preparation prior to welding. It describes the more frequently encountered processes and has recommendations on welding parameters that may be used as a starting point for the development of a viable welding procedure. Included in these chapters are hints and tips to avoid some of the pitfalls of welding these sometimes-problematic materials. The content is both descriptive and qualitative. The author has avoided the use of mathematical expressions to describe the effects of welding.This book is essential reading for welding engineers, production engineers, production managers, designers and shop-floor supervisors involved in the aluminium fabrication industry. - A practical user's guide by a respected expert to all aspects of welding of aluminium - Designed to be easily understood by the non-metallurgist whilst covering the most necessary metallurgical aspects - Demonstrates best practice in fabricating aluminium structures
Download or read book Corrosion of Aluminum and Aluminum Alloys written by Joseph R. Davis and published by ASM International. This book was released on 1999-01-01 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hot Deformation and Processing of Aluminum Alloys written by Hugh J. McQueen and published by CRC Press. This book was released on 2011-09-28 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatise on the hot working of aluminum and its alloys, Hot Deformation and Processing of Aluminum Alloys details the possible microstructural developments that can occur with hot deformation of various alloys, as well as the kind of mechanical properties that can be anticipated. The authors take great care to explain and differentiate hot working in the context of other elevated temperature phenomena, such as creep, superplasticity, cold working, and annealing. They also pay particular attention to the fundamental mechanisms of aluminum plasticity at hot working temperatures. Using extensive analysis derived from polarized light optical microscopy (POM), transmission electron microscopy (TEM), x-ray diffraction (XRD) scanning electron-microscopy with electron backscatter imaging (SEM-EBSD), and orientation imaging microscopy (OIM), the authors examine those microstructures that evolve in torsion, compression, extrusion, and rolling. Further microstructural analysis leads to detailed explanations of dynamic recovery (DRV), static recovery (SRV), discontinuous dynamic recrystallization (dDRX), discontinuous static recrystallization (dSRX), grain defining dynamic recovery (gDRV) (formerly geometric dynamic recrystallization, or gDRX), and continuous dynamic recrystallization involving both a single phase (cDRX/1-phase) and multiple phases (cDRX/2-phase). A companion to other works that focus on modeling, manufacturing involving plastic and superplastic deformation, and control of texture and phase transformations, this book provides thorough explanations of microstructural development to lay the foundation for further study of the mechanisms of thermomechanical processes and their application.
Download or read book Structure and Properties of Aluminium Alloys written by Franc Zupanič and published by Mdpi AG. This book was released on 2021-08-20 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demand for aluminum alloys is increasing because of their lightness, high specific strength and other attractive properties, which can exploited in improved products for a greener environment. This book gives a correlation between the processing, microstructure and properties of several aluminium alloys. Some of them are well established and used in an enormous number of applications, while others are still under development. The processing spans from casting, rapid solidification, additive manufacturing, forming, heat-treatment and welding, which can produce interesting microstructures and a useful combination of properties.
Download or read book Aluminum written by John E. Hatch and published by ASM International. This book was released on 1984-01-01 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive information for the American aluminium industry Collective effort of 53 recognized experts on aluminium and aluminium alloys Joint venture by world renowned authorities-the Aluminium Association Inc. and American Society for Metals. The completely updated source of information on aluminium industry as a whole rather than its individual contributors. this book is an opportunity to gain from The knowledge of the experts working for prestigious companies such as Alcoa, Reynolds Metals Co., Alcan International Ltd., Kaiser Aluminium & Chemical Corp., Martin Marietta Laboratories and Anaconda Aluminium Co. It took four years of diligent work to complete this comprehensive successor to the classic volume, Aluminium, published by ASM in 1967. Contents: Properties of Pure Aluminum Constitution of Alloys Microstructure of Alloys Work Hardening Recovery, Recrystalization and Growth Metallurgy of Heat Treatment and General Principles of Precipitation Hardening Effects of Alloying Elements and Impurities on Properties Corrosion Behaviour Properties of Commercial Casting Alloys Properties of Commercial Wrought Alloys Aluminum Powder and Powder Metallurgy Products.
Download or read book Aluminum Alloys written by Erik L. Persson and published by Nova Science Publishers. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium alloys are widely used in engineering structures and components where light weight or corrosion resistance is required. This book presents current research from across the globe in the study of aluminium alloys, including the casting methods for aluminium sheet and their effect on microstructural evolution; aluminium alloy anodes application for the removal of boron from drinking water by electrocoagulation; aluminium alloys used for corrosion resistance in structures submerged in marine environments; aluminium as an energy carrier; laser welding of aluminium alloys; and, aluminium alloy heat treatments.
Download or read book Casting Aluminum Alloys written by Michael V Glazoff and published by Elsevier. This book was released on 2010-07-07 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Casting Aluminum Alloys summarizes research conducted at Moscow Institute of Steel and Alloy during many decades in part together with Alcoa Inc. The research covered areas of the structure, properties, thermal resistance, corrosion and fatigue of aluminum alloys in industrial manufacturing. - Emphasis on interconnection among phase equilibria, thermodynamics and microstructure of alloys - Systematic overview of all phase diagrams with Al that are important for the development of casting aluminium alloys - Diagrams ("processing windows") of important technological properties such as castability, molten metal fluidity, tendency to hot pre-solidification cracking, porosity - Mathematical models for alloy mechanical properties facilitating the down-selection of best prospect candidates for new alloy development - New principles of design of eutectic casting aluminium alloys - Examples of successful novel casting alloy development, including alloys for high-strength applications, alloys with transition metals, and novel alloys utilizing aluminium scrap
Download or read book Aluminium Alloys and Composites written by Kavian Cooke and published by BoD – Books on Demand. This book was released on 2020-03-04 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium (Al) is a metal of great importance because of its excellent corrosion resistance, high electrical and thermal conductivity, good reflectivity, and very good recycling characteristics. The properties of heat-treatable Al-alloys can be further enhanced by the inclusion of a reinforcing phase that increases the mechanical properties of the overall composite. This book is a comprehensive guide on the different types of aluminum alloys and the new advances that have been made in developing and manufacturing aluminum alloys and composites. This text provides a comprehensive overview of the processing, formability, and chemical composition of aluminum alloys and composites. Part One is focused on evaluating the types and properties of advanced aluminum alloys and composites, while Part Two explores characterization. The advantage of this book is that it provides a detailed review of major advances that have occurred in the development and application of aluminum alloys and composites while outlining a development strategy for these materials.
Download or read book Aluminium Alloy Structures Second Edition written by Federico Mazzolani and published by CRC Press. This book was released on 1994-12-15 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the ways in which aluminium and its alloys satisfy the requirements of civil engineering structures and the applications in which they compete with steel. The first edition has become known as an authoritative design reference book on the subject. As a result of the author's continuing research in the field, the new edition is thoroughly revised and updated.
