EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Alternative Approaches in Development of Heterogeneous Titania Based Photocatalyst

Download or read book Alternative Approaches in Development of Heterogeneous Titania Based Photocatalyst written by Yolice P. Moreno and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Three alternative approaches for the development of heterogeneous photocatalysts are comparatively evaluated, namely (i) the use of molecular imprinting concept for the development of heterogeneous catalysts employing rhodamine B as template and sol-gel as synthesis route; (ii) the impregnation of TiCl4 on mixed nano- and micro-metric silicas, followed by calcination; (iii) the use of industrial and academic chemical residues as source of potential photocatalyst species impregnated on supports. All tests were carried on with rhodamine B as target molecule. For comparative reasons, photocatalytic tests were carried out with commercial titania (P25). The solids were characterized by nitrogen porosimetry, small-angle X-ray scattering (SAXS), zeta potential (ZP), diffuse reflectance spectroscopy in the ultraviolet region (DRS-UV), diffuse reflectance infrared Fourier transmission spectroscopy (DRIFTS), and Rutherford backscattering spectrometry (RBS). The supported catalysts resulting from silica nanoparticles and residue of the petrochemical industry achieved higher percentage of the dye degradation under ultraviolet (68.0 and 66.8%, respectively) radiation. The industrial waste reached the highest photocatalytic activity under visible (61%) radiation, while the commercial P25 achieved 82.0and 12.3% for ultraviolet and visible radiation, respectively. The textural and structural characteristics of the supported catalyst prepared with fumed silica and petrochemical waste (SiPe), namely the low-energy bandgap (1.8 eV), large surface area (280 m2 g−1), high pore volume (1.9 cm3 g−1), and high zeta potential value (−36.4 mV), may have been responsible for their high activity.

Book Heterogeneous Photocatalysis

Download or read book Heterogeneous Photocatalysis written by M. Schiavello and published by . This book was released on 1997-10-09 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photocatalysis is a reaction which is accelerated by light while a heterogeneous reaction consists of two phases ( a solid and a liquid for example). Heterogeneous Photocatalysis is a fast developing science which to date has not been fully detailed in a monograph. This title discusses the basic principles of heterogeneous photocatalysis and describes the bulk and surface properties of semiconductors. Applications of various types of photoreactions are described and the problems related to the modeling and design of photoreactors are covered.

Book Semiconductor Photocatalysis

Download or read book Semiconductor Photocatalysis written by Wenbin Cao and published by BoD – Books on Demand. This book was released on 2016-08-24 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photocatalysis is a hot topic because it is an environmentally friendly approach toward the conversion of light energy into chemical energy at mild reaction environments. Also, it is well applied in several major areas such as water splitting, bacterial inactivation, and pollutants elimination, which is a possible solution to energy shortage and environmental issues. The fundamental knowledge and the frontier research progress in typical photocatalytic materials, such as TiO2-based and non-TiO2-based photocatalysts, are included in this book. Methods to improve the photocatalytic efficiency and to provide a hint for the rational design of the new photocatalysts are covered.

Book Heterogeneous Photocatalysis

Download or read book Heterogeneous Photocatalysis written by Mario J. Muñoz-Batista and published by Springer Nature. This book was released on 2020-07-01 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Topics in Current Chemistry Collections presents critical reviews from the journal Topics in Current Chemistry organized in topical volumes. The scope of coverage is all areas of chemical science including the interfaces with related disciplines such as biology, medicine and materials science. The goal of each thematic volume is to give the non-specialist reader, whether in academia or industry, a comprehensive insight into an area where new research is emerging which is of interest to a larger scientific audience. Each review within the volume critically surveys one aspect of that topic and places it within the context of the volume as a whole. The most significant developments of the last 5 to 10 years are presented using selected examples to illustrate the principles discussed. The coverage is not intended to be an exhaustive summary of the field or include large quantities of data, but should rather be conceptual, concentrating on the methodological thinking that will allow the non-specialist reader to understand the information presented. Contributions also offer an outlook on potential future developments in the field. The chapter "Mechanochemical Forces as a Synthetic Tool for Zero and One-Dimensional Titanium Oxide-Based Nano-photocatalysts" is available open access under a CC BY 4.0 License via link.springer.com.

Book Heterogeneous Photocatalysis

Download or read book Heterogeneous Photocatalysis written by Juan Carlos Colmenares and published by Springer. This book was released on 2015-12-24 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book explains the principles and fundamentals of photocatalysis and highlights the current developments and future potential of the green-chemistry-oriented applications of various inorganic, organic, and hybrid photocatalysts. The book consists of eleven chapters, including the principles and fundamentals of heterogeneous photocatalysis; the mechanisms and dynamics of surface photocatalysis; research on TiO2-based composites with unique nanostructures; the latest developments and advances in exploiting photocatalyst alternatives to TiO2; and photocatalytic materials for applications other than the traditional degradation of pollutants, such as carbon dioxide reduction, water oxidation, a complete spectrum of selective organic transformations and water splitting by photocatalytic reduction. In addition, heterogeneized polyoxometalate materials for photocatalytic purposes and the proper design of photocatalytic reactors and modeling of light are also discussed. This book appeals to a wide readership of the academic and industrial researchers and it can also be used in the classroom for undergraduate and graduate students focusing on heterogeneous photocatalysis, sustainable chemistry, energy conversion and storage, nanotechnology, chemical engineering, environmental protection, optoelectronics, sensors, and surface and interface science. Juan Carlos Colmenares is a Professor at the Institute of Physical Chemistry, Polish Academy of Sciences, Poland. Yi-Jun Xu is a Professor at the State Key Laboratory of Photocatalysis on Energy and Environment, College of Chemistry, Fuzhou University, China.

Book Environmentally Benign Photocatalysts

Download or read book Environmentally Benign Photocatalysts written by Masakazu Anpo and published by Springer Science & Business Media. This book was released on 2010-11-10 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past few decades, mankind has observed an unprecedented and remarkable growth in industry, resulting in a more prosperous lifestyle for peoples of many countries. In developing countries, however, explosive industrial growth is just now beginning to raise the living standards of the people. Most industries, especially in these developing countries, are still powered by the burning of fossil fuels; con- quently, a lack of clean energy resources has caused environmental pollution on an unprecedented large and global scale. Toxic wastes have been relentlessly released into the air and water leading to serious and devastating environmental and health problems while endangering the planet and life itself with the effects of global warming. To address these urgent environmental issues, new catalytic and photocatalytic processes as well as open-atmospheric systems are presently being developed that can operate at room temperature while being totally clean and ef?cient and thus environmentally harmonious. Essential to technologies harnessing the abundant solar energy that reaches the earth are the highly functional photocatalytic proce- es that can utilize not only UV light, but also visible light.

Book Nanosized Titania Composites for Reinforcement of Photocatalysis and Photoelectrocatalysis

Download or read book Nanosized Titania Composites for Reinforcement of Photocatalysis and Photoelectrocatalysis written by Maksym Zahornyi and published by Cambridge Scholars Publishing. This book was released on 2022-02-06 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses recent advances in the photocatalytic and electrophotocatalytic applications of titanium dioxide nanocomposites containing polymers and other components. These materials possess photocatalytic, virucidal and antimicrobial efficacy and water and air cleaning abilities against eco-toxicants, and allow water splitting for the generation of chemical fuels. The book considers the ability of nanocomposites’ components to reinforce titania functionality in photocatalysis and photoelectrocatalysis, and presents an overview of their occurrence in nature, their thermodynamic properties, and their toxicity. The volume will be of interest to chemists and material science specialists and practitioners, as well as any reader interested in the recent scientific achievements for green and sustainable development.

Book Development of Novel Titania Based Photocatalysts for Solar H2 Production

Download or read book Development of Novel Titania Based Photocatalysts for Solar H2 Production written by Sy Eun Park and published by . This book was released on 2014 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of a hydrogen (H2) economy hinges on the discovery of simple, low-cost and environmentally friendly technologies for H2 production. Photocatalytic water splitting using sunlight and semiconductor photocatalysts has the potential to deliver an unlimited supply of carbon free H2 gas. Semiconductor photocatalysts such as titania (TiO2) are active for photocatalytic water splitting and/or ethanol photodecomposition under UV light in the presence of certain metal co-catalysts (M). Considerable research effort is now being directed into the development of improved M/TiO2 photocatalysts for H2 production from water and biofuels. This MSc research project targeted the development of novel M/TiO2 (M=Pd, Pt, Au) photocatalysts for H2 production from biofuels (alcohol-water mixtures). This work utilised a range of different TiO2 supports (some we fabricated, others commercially available) and then systematically examined the effect of metal co-catalyst deposition and treatment conditions on the activity of resulting M/TiO2 photocatalysts. The project began with the synthesis of sub-micron sized monodisperse TiO2 colloids by the controlled hydrolysis of titanium (IV) tetraisopropoxide (TTIP) in an acetonitrile:methanol:H2O solvent mixture using dodecylamine (DDA) as the catalyst and structure directing agent. By varying the TTIP:H2O ratio, it was possible to produce batches of monodisperse amorphous TiO2 colloids of different diameter. These colloids readily self-assemble under gravitational sedimentation to give 3D TiO2 colloidal crystals with pseudo photonic band gaps (PBGs) at NIR wavelengths. Calcination of the TiO2 colloids at 500°C or hydrothermal treatment at 160°C in ethanol:H2O solutions, followed by calcination at 500°C, yielded low (~10 m2/g) and high surface area (~70 m2/g) anatase colloidal crystals, respectively. Calcination at 750°C yielded rutile colloidal crystals. The optical properties of the TiO2 colloidal crystals were examined by UV-Vis reflectance measurements, and were consistent with a modified Bragg's Law expression that considered both the refraction and diffraction of electromagnetic radiation in the 3D colloidal crystals. A series of Si1-xTixO2 inverse opal photonic crystals with 3-dimensionally ordered macroporous structures, solid volume fractions between 5-10% and pseudo PBGs at visible wavelengths were then successfully fabricated, using poly (methyl methacrylate) (PMMA) colloidal crystals as sacrificial templates. The structural and optical properties of the Si1- xTixO2 inverse opals (x=0-1) were systematically characterised using SEM, TEM, XRD, UVVis and N2 physisorption. The structural data revealed a progressive transition from amorphous SiO2 to nanocrystalline anatase as the TiO2 content in the Si1-xTixO2 inverse opals increased. The pseudo PBG for Bragg diffraction on fcc (111) planes red-shifted and broadened as the TiO2 content increased, consistent with the fact that anatase (n=2.2-2.3) has a higher refractive index than amorphous SiO2 (n=1.45). The TiO2 colloids, Si1-xTixO2 inverse opals and a commercially available TiO2 (Degussa P25 TiO2) were then functionalised with Pd, Pt or Au nanoparticles to give a series of M/TiO2 photocatalysts. The metal loadings were 0.5-4 wt.%. The activity of all the TiO2 photocatalysts for H2 production from ethanol-water mixtures (80 vol.% and 10 vol.%) under UV excitation increased dramatically after the addition of the noble metal, which is explained by the metal co-catalysts acting as sinks (electron acceptors) for electrons photoexcited in TiO2, thereby preventing electron-hole pair recombination. In TiO2, ethanol serves as a sacrificial hole acceptor (electron donor) and proton source in the reaction. H2 production tests were carried out at UV-fluxes comparable to that of sunlight. Highest rates of H2 production were observed in the M/P25 TiO2 system (1 wt.% Pt/P25 TiO2=56.4 mmol g-1 h-1, 1 wt.% Pd/P25 TiO2=50.4 mmol g-1 h-1, 2 wt.% Au/P25 TiO2=47.2 mmol g-1 h-1) with rates being strongly dependent on the catalyst preparation and pretreatment conditions which influences both co-catalyst particle size and dispersion over the TiO2 support. Lower rates of H2 production were seen in the Au/TiO2 colloid and Au/TiO2 inverse opal systems, which is explained in terms of phase composition of TiO2 present in these samples. Degussa P25 TiO2, which is a mixture of anatase and rutile (85 wt.% anatase; 15 wt.% rutile), is a superior photocatalyst support than pure anatase (of which both the TiO2 colloids and TiO2 inverse opals are composed) on account of the synergistic electron transfer processes that occur at the anatase/rutile interface. On the basis of the results presented, strategies for optimising the activity of M/TiO2 photocatalysts for solar H2 production from biofuels can be developed.

Book Application of Titanium Dioxide Photocatalysis to Construction Materials

Download or read book Application of Titanium Dioxide Photocatalysis to Construction Materials written by Yoshihiko Ohama and published by Springer Science & Business Media. This book was released on 2011-05-12 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium dioxide photocatalysis is based on the semiconducting nature of its anatase crystal type. Construction materials with titanium photocatalyst show performances of air purification, self-cleaning, water purification, antibacterial action. This book describes principles of titanium dioxide photocatalysis, its applications to cementitious and noncementitious materials, as well as an overview of standardization of testing methods.

Book Homogeneous and Heterogeneous Photocatalysis

Download or read book Homogeneous and Heterogeneous Photocatalysis written by E. PELIZZETTI and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ever since the oil crisis of 1973, researchers in various fields of chemistry have proposed various schemes to conserve energy, as well to convert the sun's abundant and limitless supply of energy to produce chemical fuels (e. g. , hydrogen from water, . •. ). The enthusiasm had no previous parallel in the mid-1970's. Unfortunately, despite the several good proposals, the results have proven - in retrospect - somewhat disappointing from an economic viable point of view. The reasons for the meagre results are manyfold not the least of which are the experimental difficulties encountered in storage systems. Moreover, the lack of a concerted, well orchestrated interdisciplinary approach has been significant. By contrast, the chemical advances made in the understanding of the processes involved in such schemes have been phenomenal. A recent book on this issue ( M. Gratzel, Energy Resources through Photochemistry and Catalysis, 1983) is witness to the various efforts and approaches taken by researchers. In the recent years, many more groups have joined in these efforts, and the number of papers in the lit~rature is staggering ! One of the motives for organizing this NATO Advanced Research Workshop stemmed from our view that it was time to take stock of the accomplishments and rather than propose new schemes, it was time to consider seriously avenues that are most promising.

Book Photocatalysis for Environmental Remediation and Energy Production

Download or read book Photocatalysis for Environmental Remediation and Energy Production written by Seema Garg and published by Springer Nature. This book was released on 2023-05-06 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the modification of various synthesis processes to enhance the photocatalytic activity in varied applications in the fields of environmental remediation and energy production. It outlines the enhancement of photocatalytic activity via alloys synthesis, thin film coatings, electro-spun nanofibers and 3D printed photocatalysts. The book further states the diverse applications of materials for degrading organic pollutants and airborne pathogens, improving indoor air quality and as a potential antimicrobial agent. The application of photocatalysts in green organic synthesis, biomedical field and in hydrogen evolution are also presented in the book. It covers theoretical studies of photocatalytic material and conversion of CO2 to value added chemical feed stocks. The book is of relevance to researchers in academia and industry alike in the fields of material science, environmental science & technology, photocatalytic applications and in energy generation and conversion.

Book Surface Science of Photocatalysis

Download or read book Surface Science of Photocatalysis written by Jiaguo Yu and published by Academic Press. This book was released on 2020-04-14 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Science of Photocatalysis, Volume 32, summarizes significant findings on the surface science behind various classic and novel photocatalysts for energy and environmental applications, with special emphasis on important surface/interface processes in photocatalysis, such as interfacial charge transfer, function of co-catalysts, and adsorption over photocatalyst surface. This book timely and systematically reviews the state-of-the-art of the surface science in semiconductor-based photocatalysis, serving as a useful reference book for both new and experienced researchers in this field. Provides timely reviews on cutting-edge research on surface science and photocatalysts Comprehensively discusses novel photocatalysts, such as metal oxides, metal sulphides, graphitic carbon nitrides, graphene and metal-organics Presents important surface/interface processes in photocatalysis, like Z-scheme system and surface heterojunctions Investigates the function of co-catalysts and the adsorption on photocatalyst surfaces Edited by world-leading researchers in interface science

Book Advanced Water Treatment

Download or read book Advanced Water Treatment written by Mika Sillanpaa and published by Elsevier. This book was released on 2020-01-08 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Water Treatment: Advanced Oxidation Processes reviews the most recent research findings and discusses new photocatalysts (such as TiO2, etc.) and their performance under different conditions. Furthermore, the book includes the use of UV LEDs (with H2O2) for the decomposition of organic pollutants and bacteria in various conditions and water samples. Advanced oxidation processes (AOPs) have widely been used in water and wastewater treatment. This book highlights their work towards improving energy-efficient and environmentally friendly technology for growing needs in water treatment. Includes most recent research on advanced water treatment using photocatalysis Covers novel photocatalysts for water purification Presents the use of sulphide materials in water purification

Book Heterogeneous Nanocatalysis for Energy and Environmental Sustainability  Volume 2

Download or read book Heterogeneous Nanocatalysis for Energy and Environmental Sustainability Volume 2 written by Putla Sudarsanam and published by John Wiley & Sons. This book was released on 2023-01-04 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the environmental applications of heterogeneous nanocatalysis in the field of alternative energy production In Volume 2: Environmental Applications of Heterogeneous Nanocatalysis for Energy and Environmental Sustainability, a team of distinguished researchers discusses the foundational concepts and practical applications of heterogeneous nanocatalysis for alternative energy production. Volume 2 focuses on the purification of auto exhaust pollutants and volatile organic compounds, as well as CO2 conversion and wastewater treatment over a range of nano-sized catalysts.

Book Metal Oxides

    Book Details:
  • Author : J.L.G. Fierro
  • Publisher : CRC Press
  • Release : 2005-08-24
  • ISBN : 142002812X
  • Pages : 808 pages

Download or read book Metal Oxides written by J.L.G. Fierro and published by CRC Press. This book was released on 2005-08-24 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chemistry of metals has traditionally been more understood than that of its oxides. As catalytic applications continue to grow in a variety of disciplines, Metal Oxides: Chemistry and Applications offers a timely account of transition-metal oxides (TMO), one of the most important classes of metal oxides, in the context of catalysis. The

Book Photocatalysts

    Book Details:
  • Author : Sher Bahadar Khan
  • Publisher : BoD – Books on Demand
  • Release : 2019-03-06
  • ISBN : 178985475X
  • Pages : 158 pages

Download or read book Photocatalysts written by Sher Bahadar Khan and published by BoD – Books on Demand. This book was released on 2019-03-06 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book enlightens the type, chemical structure, and application of photo-catalysts. It covers the recent developments in photo-catalysts and their applications, particularly in photo-catalytic degradation of different organic pollutants, hydrogen production, etc. It provides a concise but complete coverage and overview of photocatalysts and their recent advances for a broad audience: beginners, graduate students, and specialists in both academic and industrial sectors.