Download or read book Alloying written by Joseph R. Davis and published by ASM International. This book was released on 2001-01-01 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alloying: Understanding the Basics is a comprehensive guide to the influence of alloy additions on mechanical properties, physical properties, corrosion and chemical behavior, and processing and manufacturing characteristics. The coverage considers "alloying" to include any addition of an element or compound that interacts with a base metal to influence properties. Thus, the book addresses the beneficial effects of major alloy additions, inoculants, dopants, grain refiners, and other elements that have been deliberately added to improve performance, as well the detrimental effects of minor elements or residual (tramp) elements included in charge materials or that result from improper melting or refining techniques. The content is presented in a concise, user-friendly format. Numerous figures and tables are provided. The coverage has been weighted to provided the most detailed information on the most industrially important materials.
Download or read book Mechanical Alloying written by Li Lü and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical alloying (or mechanical milling) was invented in the 1970's as a method to develop dispersion-strengthened high temperature alloys with unique properties. With the discovery of formation of amorphous alloys using this technique, it has received new research interest in developing different material systems. Potential applications of this technique have been demonstrated in different areas of materials research. This book is intended as an introduction to mechanical alloying technique used in difference areas. This book contains basic information on the preparation of materials using the mechanical alloying technique. It is useful not only to undergraduate and post-graduate students, but also to scientists and engineers who wish to gain some understanding on the basic process and mechanisms of the process. The book begins with a brief introduction to provide a historical background understanding to the development of the mechanical alloying process. The experimental set-up in the alloying process is important. Currently there are different types of ball mills available. Some of them are specially designed for mechanical alloying process. Since the resultant materials are milling intensity and milling temperature dependent, ball mills should be carefully selected in order to obtain the desired materials and structures. This is discussed in chapter 2. The actual mechanical alloying process is being considered in Chapter 3. As it is essential to understand the use of processing control agents, the physical properties of some commonly used processing control agents are listed.
Download or read book Mechanical Alloying written by P. R. Soni and published by Cambridge Int Science Publishing. This book was released on 2000 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation ContentsIntroduction (history, benefits of mechanical alloying); Mechanical alloying (alloying mills, mills in practice, improved mills, the process, parameters); Variations of mechanical alloying (reaction milling, cryomilling, repeated rolling, double mechanical alloying, repeated forging); Process controlagents in MA; (ductile-ductile system, ductile-brittle system, brittle-brittle system, metastable phase formation, amorphisation, nanocrystallization, extension of solid solubility, activation of solid state chemical interaction); Energy transfer and energy maps; Consolidation of mechanically alloyed powders (consolidation techniques, thermomechanical treatment); Mechanical properties of mechanically alloyed materials (tensile properties, fracture, creep, stress corrosion cracking susceptibility); Modelling MA (mechanistic models, deformation, coalescence and fragmentation, evolution of particle size, milling time, powder heating, powder cooling, atomistic model, thermodynamic and kinetic model)Joining of mechanically alloyed materials; Rapid solidification and mechanical alloying; Applications (nickel-based superalloys, AI-based materials, supersaturated solutions, magnetic materials, mechanically alloyed powders for spray coatings, superplasticity, tribological materials, composites, amorphous solids, nanocrystalline materials, solid-state chemical reactions, etc).
Download or read book Mechanical Alloying written by M. Sherif El-Eskandarany and published by William Andrew. This book was released on 2020-04-17 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Alloying: Energy Storage, Protective Coatings, and Medical Applications, Third Edition is a detailed introduction to mechanical alloying that offers guidelines on the necessary equipment and facilities needed to carry out the process, also giving a fundamental background to the reactions taking place. El-Eskandarany, a leading authority on mechanical alloying, discusses the mechanism of powder consolidations using different powder compaction processes. A new chapter is included on utilization of the mechanically alloyed powders for thermal spraying. Fully updated to cover recent developments in the field, this second edition also introduces new and emerging applications for mechanical alloying, including the fabrication of carbon nanotubes, surface protective coating and hydrogen storage technology. El-Eskandarany discusses the latest research into these applications and provides engineers and scientists with the information they need to implement these developments. Guides readers through each step of the mechanical alloying process Includes tables and graphs that are used to explain the stages of the milling processes Presents a comprehensive update on the previous edition, including new chapters that cover emerging applications
Download or read book Mechanical Alloying of Ferrous and Non Ferrous Alloys written by Shashanka Rajendrachari and published by Elsevier. This book was released on 2024-06-28 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an in-depth exploration of ferrous and non-ferrous alloys including various methods of preparation and production, their mechanical properties, and applications. The advantages of the mechanical alloying processing approach over other traditional powder metallurgical techniques is explained as are which alloys are best suited for this technique. Preparation steps, microstructures, properties, and applications for ferrous and non-ferrous alloys are compared, with insight on which alloys are best suited for preparation by alloying. The advantages and disadvantages of wet and dry milling are outlined. Processing, properties, and applications of high entropy alloys, ODS stainless steel, shape memory alloys, cermets, iron, copper, zinc, tungsten, aluminum, titanium, magnesium, and ceramic-based alloys are also covered, as are different powder preparation techniques and sintering methods. Outlines the different types of mechanical alloying used to prepare powders, their mechanisms, factors affecting the process, and more Covers the manufacturing, characteristics, and applications of high entropy alloys, ODS stainless steel, shape memory alloys, magnesium, ceramic-based alloys, and more Compares preparation of ferrous and non-ferrous alloys, their microstructures, and properties Discusses the advantages and disadvantages of wet and dry milling
Download or read book SiBCN Ceramics and Composites Prepared by Mechanical Alloying written by Daxin Li and published by Springer Nature. This book was released on with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Surface Alloying of Metals written by Santosh S. Hosmani and published by Springer Science & Business. This book was released on 2014-04-25 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Surface Alloying of Metals aims to serve as a primer to the basic aspects of surface alloying of metals. The book serves to elucidate fundamentals of surface modification and their engineering applications. The book starts with basics of surface alloying and goes on to cover key surface alloying methods, such as carburizing, nitriding, chromizing, duplex treatment and the characterization of surface layers. The book will prove useful to students at both the undergraduate and graduate levels, as also to researchers and practitioners looking for a quick introduction to surface alloying.
Download or read book Surface Modification and Alloying written by J.M. Poate and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an outcome of the NATO institute on surface modification which was held in Trevi, 1981. Surface modification and alloying by ion, electron or laser beams is proving to be one of the most burgeoning areas of materials science. The field covers such diverse areas as integrated circuit processing to fabricating wear and corrosion resistant surfaces on mechanical components. The common scientific questions of interest are the microstructures by the different energy deposition techniques. and associated physical properties produced The chapters constitute a critical review of the various subjects covered at Trevi. Each chapter author took responsibility for the overall review and used contributions from the many papers presented at the meeting; each participant gave a presentation. The contributors are listed at the start of each chapter. We took this approach to get some order in a large and diverse field. We are indebted to all the contributors, in particular the chapter authors for working the many papers into coherent packages; to Jim Mayer for hosting a workshop of chapter authors at Cornell and to Ian Bubb who did a sterling job in working over some of the manuscripts. Our special thanks are due to the text processing center at Bell Labs who took on the task of assembling the book. In particular Karen Lieb and Beverly Heravi typed the whole manuscript and had the entire book phototypeset using the Bell Laboratories UNIXTM system.
Download or read book Mechanical Alloying written by Li Lü and published by Springer Science & Business Media. This book was released on 1997-11-30 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical alloying (or mechanical milling) was invented in the 1970's as a method to develop dispersion-strengthened high temperature alloys with unique properties. With the discovery of formation of amorphous alloys using this technique, it has received new research interest in developing different material systems. Potential applications of this technique have been demonstrated in different areas of materials research. This book is intended as an introduction to mechanical alloying technique used in difference areas. This book contains basic information on the preparation of materials using the mechanical alloying technique. It is useful not only to undergraduate and post-graduate students, but also to scientists and engineers who wish to gain some understanding on the basic process and mechanisms of the process. The book begins with a brief introduction to provide a historical background understanding to the development of the mechanical alloying process. The experimental set-up in the alloying process is important. Currently there are different types of ball mills available. Some of them are specially designed for mechanical alloying process. Since the resultant materials are milling intensity and milling temperature dependent, ball mills should be carefully selected in order to obtain the desired materials and structures. This is discussed in chapter 2. The actual mechanical alloying process is being considered in Chapter 3. As it is essential to understand the use of processing control agents, the physical properties of some commonly used processing control agents are listed.
Download or read book Mechanical Alloying And Milling written by Cury Suryanarayana and published by CRC Press. This book was released on 2004-09-28 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book surveys the broad field of mechanical alloying from a scientific and technological perspective to form a timely and comprehensive resource valuable to both students and researchers. The treatment progresses from the historical background through a description of the process, the different metastable effects produced, and the mechanisms of
Download or read book Chromium Nickel and Other Alloying Elements in U S produced Stainless and Heat resisting Steel written by John F. Papp and published by . This book was released on 1991 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Alloying Effects on Tungsten fiber reinforced Copper alloy Or High temperature alloy Matrix Composites written by Donald W. Pettrasek and published by . This book was released on 1963 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Superalloys written by Blaine Geddes and published by ASM International. This book was released on 2010-01-01 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This practical guide provides an introduction for understanding the compositional complexity of superalloys superalloy and the wide range of alloys developed for specific applications. The basics of alloying, strengthening mechanisms, and structure of superalloys are explained in optimizing particular mechanical properties, oxidation/corrosion resistance, and manufacturing characteristics such as castability, forgeability, and weldability."--Publisher's description.
Download or read book Mechanical Alloying written by M. Sherif El-Eskandarany and published by Elsevier. This book was released on 2015-05-13 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a detailed introduction to mechanical alloying, offering guidelines on the necessary equipment and facilities needed to carry out the process and giving a fundamental background to the reactions taking place. El-Eskandarany, a leading authority on mechanical alloying, discusses the mechanism of powder consolidations using different powder compaction processes. A new chapter will also be included on thermal, mechanically-induced and electrical discharge-assisted mechanical milling. Fully updated to cover recent developments in the field, this second edition also introduces new and emerging applications for mechanical alloying, including the fabrication of carbon nanotubes, surface protective coating and hydrogen storage technology. El-Eskandarany discusses the latest research into these applications, and provides engineers and scientists with the information they need to implement these developments. The industrial applications of nanocrystalline and metallic glassy powders are presented. The book also contains over 200 tables and graphs to illustrate the milling processes and present the properties and characteristics of the resulting materials. Guides readers through each step of the mechanical alloying process, covering best practice techniques and offering guidelines on the required equipment Tables and graphs are used to explain the stages of the milling processes and provide an understanding of the properties and characteristics of the resulting materials A comprehensive update on the previous edition, including new chapters to cover new applications
Download or read book Alloying Elements in Steel written by Edgar Collins Bain and published by . This book was released on 1966 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Machinery written by and published by . This book was released on 1908 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Official Gazette of the United States Patent Office written by USA Patent Office and published by . This book was released on 1911 with total page 2430 pages. Available in PDF, EPUB and Kindle. Book excerpt:
