Download or read book A Review of the Status Selection and Physical Metallurgy of High strength Low alloy Steels written by Ellis E. Fletcher and published by . This book was released on 1979 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Strength Low Alloy Steels written by Ricardo Branco and published by Mdpi AG. This book was released on 2021-10-25 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern industry, driven by the recent environmental policies, faces an urgent need for the production of lighter and more environmentally-friendly components. High-strength low-alloy steels are key materials in this challenging scenario because they provide a balanced combination of properties, such as strength, toughness, formability, weldability, and corrosion resistance. These features make them ideal for a myriad of engineering applications which experience complex loading conditions and aggressive media, such as aeronautical and automotive components, railway parts, offshore structures, oil and gas pipelines, power transmission towers, and construction machinery, among others. The goal of this book is to foster the dissemination of the latest research devoted to high-strength low-alloy (HSLA) steels from different perspectives.
Download or read book Mechanical Behavior of High Strength Low Alloy Steels written by Ricardo Branco and published by MDPI. This book was released on 2018-10-12 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Mechanical Behavior of High-Strength Low-Alloy Steels" that was published in Metals
Download or read book Fatigue behavior in hot rolled plain carbon and high strength low alloy steels written by Jeffrey Perout (J.) and published by . This book was released on 1976 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon and Alloy Steels written by Joseph R. Davis and published by Asm International. This book was released on 1996 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following a general introduction, which reviews steelmaking practices as well as the classification, general properties, and applications of steel, this volume contains four major sections that describe processing characteristics, service characteristics, corrosion behavior, and material requirement
Download or read book Phase Transformations in Steels written by Elena Pereloma and published by Elsevier. This book was released on 2012-05-11 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: The processing-microstructure-property relationships in steels continue to present challenges to researchers because of the complexity of phase transformation reactions and the wide spectrum of microstructures and properties achievable. This major two-volume work summarises the current state of research on phase transformations in steels and its implications for the emergence of new steels with enhanced engineering properties.Volume 2 reviews current research on diffusionless transformations and phase transformations in high strength steels, as well as advances in modelling and analytical techniques which underpin this research. Chapters in part one discuss the crystallography and kinetics of martensite transformations, the morphology, substructure and tempering of martensite as well as shape memory in ferrous alloys. Part two summarises research on phase transformations in high strength low alloy (HSLA) steels, transformation induced plasticity (TRIP)-assisted multiphase steels, quenched and partitioned steels, advanced nanostructured bainitic steels, high manganese twinning induced plasticity (TWIP) and maraging steels. The final two parts of the book review advances in modelling and the use of advanced analytical techniques to improve our understanding of phase transformations in steels.With its distinguished editors and distinguished international team of contributors, the two volumes of Phase transformations in steels is a standard reference for all those researching the properties of steel and developing new steels in such areas as automotive engineering, oil and gas and energy production. Alongside its companion volume, this major two-volume work summarises the current state of research on phase transformations in steels Reviews research on diffusionless transformations and phase transformations in high strength steels Examines advances in modelling and the use of advanced analytical techniques to improve understanding of phase transformations in steels
Download or read book Phase Transformations in Steels written by Elena Pereloma and published by Elsevier. This book was released on 2012-05-11 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: The processing-microstructure-property relationships in steels continue to present challenges to researchers because of the complexity of phase transformation reactions and the wide spectrum of microstructures and properties achievable. This major two-volume work summarises the current state of research on phase transformations in steels and its implications for the emergence of new steels with enhanced engineering properties. Volume 1 reviews fundamentals and diffusion-controlled phase transformations. After a historical overview, chapters in part one discuss fundamental principles of thermodynamics, diffusion and kinetics as well as phase boundary interfaces. Chapters in part two go on to consider ferrite formation, proeutectoid ferrite and cementite transformations, pearlite formation and massive austenite-ferrite phase transformations. Part three discusses the mechanisms of bainite transformations, including carbide-containing and carbide-free bainite. The final part of the book considers additional driving forces for transformation including nucleation and growth during austenite-to-ferrite phase transformations, dynamic strain-induced ferrite transformations (DIST) as well as the effects of magnetic fields and heating rates. With its distinguished editors and distinguished international team of contributors, the two volumes of Phase transformations in steels is a standard reference for all those researching the properties of steel and developing new steels in such areas as automotive engineering, oil and gas and energy production. Discusses the fundamental principles of thermodynamics, diffusion and kinetics Considers various transformations, including ferrite formation, proeutectoid ferrite and cementite transformations Considers additional driving forces for transformation including nucleation and growth during austenite-to-ferrite phase transformations
Download or read book HIGH STRENGTH LOW ALLOY STEEL written by Carbon and Alloy Steels Committee and published by . This book was released on 1969 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermomechanical Processing of High Strength Low Alloy Steels written by Imao Tamura and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermomechanical Processing of High-Strength Low-Alloy Steels considers some advanced techniques and metallurgical bases for controlled-rolling. This book contains 12 chapters. In Chapter 1, the purpose of thermomechanical processing and historical survey is described, while in Chapter 2, the kinetics of phase transformations and refinement of grain size in steels are elaborated. The techniques and metallurgical bases for controlled-rolling in the recrystallization, non-recrystallization, and (? + y) regions are reviewed in Chapters 3 to 5. Chapters 6 and 7 discuss the deformation resistance during hot-rolling and restoration processes. The phase transformations during cooling following hot-rolling are mentioned in Chapter 8, followed by a summarization of the effects of alloying elements in Chapter 9. Chapters 10 and 11 deal with the mechanical properties of controlled-rolled steel and prediction and control of microstructure and properties by thermomechanical processes. The problems faced and possibilities for future developments are stated in the last chapter. This publication is recommended for physicists, metallurgists, and researchers concerned with controlled-rolling, including non-specialists who have some knowledge of metallurgy.
Download or read book HSLA Steels 2015 Microalloying 2015 Offshore Engineering Steels 2015 written by The Chinese Society for Metals and published by Springer. This book was released on 2017-03-22 with total page 1147 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a collection of papers presented at the joint conference of the 7th International Conference on High Strength Low Alloy Steels (HSLA Steels 2015), the International Conference on Microalloying 2015 (Microalloying 2015), and the International Conference on Offshore Engineering Steels 2015 (OES 2015). The papers focus on the exchange of the latest scientific and technological progresses on HSLA steels, microalloying steels, and offshore engineering steels over the past decades. The contributions are intended to strengthen cooperation between universities and research institutes, and iron and steel companies and users, and promote the further development in the fields all over the world.
Download or read book Piping Materials Guide written by Peter Smith and published by Elsevier. This book was released on 2005-01-20 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only book of its kind on the market, this book is the companion to our Valve Selection Handbook, by the same author. Together, these two books form the most comprehensive work on piping and valves ever written for the process industries. This book covers the entire piping process, including the selection of piping materials according to the job, the application of the materials and fitting, trouble-shooting techniques for corrosion control, inspections for OSHA regulations, and even the warehousing, distributing, and ordering of materials. There are books on materials, fitting, OSHA regulations, and so on, but this is the only "one stop shopping" source for the piping engineer on piping materials. - Provides a "one stop shopping" source for the piping engineer on piping materials- Covers the entire piping process. - Designed as an easy-to-access guide
Download or read book Trends in the Metallurgy of Low alloy High yield strength Steels written by James Bliss Austin and published by . This book was released on 1963 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manual on Low Cycle Fatigue Testing written by American Society for Testing Materials and published by ASTM International. This book was released on 1969 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Coatings written by Sudhangshu Bose and published by Butterworth-Heinemann. This book was released on 2017-11-27 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Coatings, Second Edition, demonstrates how to counteract the thermal effects of rapid corrosion and degradation of exposed materials and equipment that can occur under high operating temperatures. This is the first true practical guide on the use of thermally protective coatings for high-temperature applications, including the latest developments in materials used for protective coatings. It covers the make-up and behavior of such materials under thermal stress and the methods used for applying them to specific types of substrates, as well as invaluable advice on inspection and repair of existing thermal coatings. With his long experience in the aerospace gas turbine industry, the author has compiled the very latest in coating materials and coating technologies, as well as hard-to-find guidance on maintaining and repairing thermal coatings, including appropriate inspection protocols. The book is supplemented with the latest reference information and additional support to help readers find more application- and industry-type coatings specifications and uses. Offers an overview of the underlying fundamental concepts of thermally-protective coatings, including thermodynamics, energy kinetics, crystallography and equilibrium phases Covers essential chemistry and physics of underlying substrates, including steels, nickel-iron alloys, nickel-cobalt alloys and titanium alloys Provides detailed guidance on a wide variety of coating types, including those used against high temperature corrosion and oxidative degradation and thermal barrier coatings
Download or read book Steels written by D. T. Llewellyn and published by Elsevier. This book was released on 2013-10-22 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steels: Metallurgy and Applications deals with the metallurgy and applications of steel and covers the broad spectrum of the mainstream commercial grades as well as the service or manufacturing requirements that govern their use. Standard specifications and some of the design considerations that provide satisfactory service performance are considered. Brief reference is also made to some of the steel prices that were effective on January 1, 1991. Comprised of five chapters, this book begins with an overview of technological trends in the steelmaking industry since 1980s, paying particular attention to energy conservation, iron-making, continuous casting, and product requirements. The next chapter is devoted to low-carbon strip steels and their cold-forming behavior, applications, and metallurgical factors affecting cold formability. The third chapter focuses on low-carbon structural steels and their strengthening mechanisms, while the fourth chapter considers engineering steels and their heat treatment aspects. The final chapter describes stainless steels and their composition-structure relationships, commercial grades, corrosion resistance, welding, and cold working. The mechanical properties of stainless steels at elevated and sub-zero temperatures are also examined. This monograph will be of interest to students and practicing metallurgists.
Download or read book Advanced High Strength Steels written by Mahmoud Y. Demeri and published by ASM International. This book was released on 2013-08-01 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the types, microstructures and attributes of AHSSAlso reviews the current and future applications, the benefits, trends and environmental and sustainability issues.
Download or read book Alloy Steel Properties and Use written by Leroy Sidney and published by . This book was released on 2016-04-01 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low-alloy steels and high-alloy steels. Most commonly, the phrase "alloy steel" refers to low-alloy steels. Alloy steels are made by combining carbon steel with one or several alloying elements, such as manganese, silicon, nickel, titanium, copper, chromium and aluminum. These metals are added to produce specific properties that are not found in regular carbon steel. The elements are added in varying proportions (or combinations) making the material take on different aspects such as increased hardness, increased corrosion resistance, increased strength, improved formability (ductility); the weldability can also change. Alloying elements are added to achieve certain properties in the material. As a guideline, alloying elements are added in lower percentages (less than 5%) to increase strength or hardenability, or in larger percentages (over 5%) to achieve special properties, such as corrosion resistance or extreme temperature stability. Manganese, silicon, or aluminum are added during the steelmaking process to remove dissolved oxygen, sulfur and phosphorus from the melt. Manganese, silicon, nickel, and copper are added to increase strength by forming solid solutions in ferrite. Chromium, vanadium, molybdenum, and tungsten increase strength by forming second-phase carbides. Nickel and copper improve corrosion resistance in small quantities. Molybdenum helps to resist embrittlement. Zirconium, cerium, and calcium increase toughness by controlling the shape of inclusions. Sulfur, in the form of manganese sulfide, lead, bismuth, selenium, and tellurium, increases mach inability. Alloying elements also have an effect on the eutectoid temperature of the steel. This book entitled Alloy Steel are devoted to new approaches and usages of stainless steels, the influence of the environments on the behavior of certain classes of steels, new structural concepts to understand some fatigue processes, new insight on strengthening mechanisms, and toughness in micro alloyed steels.
