Download or read book Alloy and microstructural design written by John K. Tien and published by . This book was released on 1976 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Alloy And Microstructural Design written by John Tien and published by Elsevier. This book was released on 2012-12-02 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alloy and Microstructural Design serves as a guide in translating theory into design and practice and provides text for an applications courses in physical and mechanical metallurgy. Coverage of the book includes a short history and introduction to metals and alloys; high-strength nonferrous alloys; and methods in strengthening metals for commercial use and high temperatures. The text also discusses the composite strengthening; the properties of composites; creep and stress rupture resistance and other factors related to them; fracture toughness; and mechanical equations of state. The book also covers the resistance of metals and alloys against fatigue, aqueous, stress, and hot corrosion, as well as in oxidation and hydrogen embrittlement. The monograph is recommended for practicing engineers in the field of metallurgy who need an easily understood guide with concise text and tables of handy information. The book will also serve as a good learning material for engineering undergraduates who are studying the strength of materials.
Download or read book Metallurgy and Design of Alloys with Hierarchical Microstructures written by Krishnan K. Sankaran and published by Elsevier. This book was released on 2017-06-14 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallurgy and Design of Alloys with Hierarchical Microstructures covers the fundamentals of processing-microstructure-property relationships and how multiple properties are balanced and optimized in materials with hierarchical microstructures widely used in critical applications. The discussion is based principally on metallic materials used in aircraft structures; however, because they have sufficiently diverse microstructures, the underlying principles can easily be extended to other materials systems. With the increasing microstructural complexity of structural materials, it is important for students, academic researchers and practicing engineers to possess the knowledge of how materials are optimized and how they will behave in service. The book integrates aspects of computational materials science, physical metallurgy, alloy design, process design, and structure-properties relationships, in a manner not done before. It fills a knowledge gap in the interrelationships of multiple microstructural and deformation mechanisms by applying the concepts and tools of designing microstructures for achieving combinations of engineering properties—such as strength, corrosion resistance, durability and damage tolerance in multi-component materials—used for critical structural applications. Discusses the science behind the properties and performance of advanced metallic materials Provides for the efficient design of materials and processes to satisfy targeted performance in materials and structures Enables the selection and development of new alloys for specific applications based upon evaluation of their microstructure as illustrated in this work
Download or read book Alloy and Microstructural Design written by John K. Tien and published by . This book was released on 2000 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nano and Microstructural Design of Advanced Materials written by M. A. Meyers and published by Elsevier. This book was released on 2003-12-05 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of the nanoscale effects has been recognized in materials research for over fifty years, but it is only recently that advanced characterization and fabrication methods are enabling scientists to build structures atom-by-atom or molecule-by molecule. The understanding and control of the nanostructure has been, to a large extent, made possible by new atomistic analysis and characterization methods pioneered by transmission electron microscopy. Nano and Microstructural Design of Advanced Materials focuses on the effective use of such advanced analysis and characterization techniques in the design of materials. Teaches effective use of advanced analysis and characterization methods at an atomistic level Contains many supporting examples of materials in which such design concepts have been successfully applied
Download or read book Microstructural Design of Advanced Engineering Materials written by Dmitri A. Molodov and published by John Wiley & Sons. This book was released on 2013-07-17 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: The choice of a material for a certain application is made taking into account its properties. If, for example one would like to produce a table, a hard material is needed to guarantee the stability of the product, but the material should not be too hard so that manufacturing is still as easy as possible - in this simple example wood might be the material of choice. When coming to more advanced applications the required properties are becoming more complex and the manufacturer`s desire is to tailor the properties of the material to fit the needs. To let this dream come true, insights into the microstructure of materials is crucial to finally control the properties of the materials because the microstructure determines its properties. Written by leading scientists in the field of microstructural design of engineering materials, this book focuses on the evolution and behavior of granular microstructures of various advanced materials during plastic deformation and treatment at elevated temperatures. These topics provide essential background and practical information for materials scientists, metallurgists and solid state physicists.
Download or read book Alloy Materials and Their Allied Applications written by Inamuddin and published by John Wiley & Sons. This book was released on 2020-06-16 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alloy Materials and Their Allied Applications provides an in-depth overview of alloy materials and applications. The 11 chapters focus on the fabrication methods and design of corrosion-resistant, magnetic, biodegradable, and shape memory alloys. The industrial applications in the allied areas, such as biomedical, dental implants, abrasive finishing, surface treatments, photocatalysis, water treatment, and batteries, are discussed in detail. This book will help readers solve fundamental and applied problems faced in the field of allied alloys applications.
Download or read book High Entropy Alloys Microstructures and Properties written by David J. Fisher and published by Trans Tech Publications Ltd. This book was released on 2015-08-04 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are relatively few revolutions in the venerable and rather staid field of metallurgy. One can count among them the advent of metallic glasses, of superplastic metals, or of memory-alloys. The latest revolution involves the relatively staid topic of alloy formulation, but is all the more startling because the resultant materials break every long-cherished rule of alloy design. In particular, the famous empirical rules of Hume-Rothery are completely ignored. That is, in the archetypal high-entropy alloy, five metals are alloyed together in equal proportions regardless of atomic-size difference, valence or crystal structure. Commonsense would tell any experienced metallurgist that that could result only in a uselessly brittle mass of intermetallic compounds. But in a truly paradigm-shifting manner, Professor J.W.Yeh of Taiwan correctly predicted that a high configurational entropy could suppress the appearance of detrimental intermetallic compounds and lead to simple familiar microstructures having very useful properties. High-Entropy Alloys can exhibit, for instance, astounding hardness and strength and also have a very good corrosion resistance. The present book summarises the microstructures and properties of all of the high-entropy alloys.
Download or read book Fundamental Aspects of Structural Alloy Design written by Robert Jaffee and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 665 pages. Available in PDF, EPUB and Kindle. Book excerpt: FUNDAMENTAL ASPECTS OF STRUCTURAL ALLOY DESIGN is the proceedings of the tenth Battelle Colloquium in the Materials Sciences, held in Seattle, Washington, and Harrison Hot Springs, B.C., September 15-19, 1975. The theme of the conference was the emerging science of alloy design. Although the relationships of properties of alloys to their composition and structure have long been a dominant theme in physical metallurgy, it is only recently that metallurgists have turned their attention from the analytical, post hoc study of the structure-property relationship to the synthesis approach of alloy design. As usual in the Battelle colloquia, the first day started with a group of introductory lectures presented by leaders in the field, each emphasizing his personal approach to the problem. This provided a historical perspective for the colloquium. These papers, together with the banquet address of Professor J. R. Low, Jr., who was honored at the colloquium, comprise the introductory section of these proceedings. Alloy design is generally specific to a given application. Thus, the needs in alloy design in a number of important applications, gas turbines, electrical-power-generation equipment, airframes, pressure vessels, and nuclear applications were presented in a group of papers. An agenda discus sion on "Needs in Alloy Design" followed. These papers give the external constraints on alloy design applications, and criteria for mechanical, physical, and chemical properties for which the alloys must be designed.
Download or read book Metallography and Microstructure in Ancient and Historic Metals written by David A. Scott and published by Getty Publications. This book was released on 1992-01-02 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: David A. Scott provides a detailed introduction to the structure and morphology of ancient and historic metallic materials. Much of the scientific research on this important topic has been inaccessible, scattered throughout the international literature, or unpublished; this volume, although not exhaustive in its coverage, fills an important need by assembling much of this information in a single source. Jointly published by the GCI and the J. Paul Getty Museum, the book deals with many practical matters relating to the mounting, preparation, etching, polishing, and microscopy of metallic samples and includes an account of the way in which phase diagrams can be used to assist in structural interpretation. The text is supplemented by an extensive number of microstructural studies carried out in the laboratory on ancient and historic metals. The student beginning the study of metallic materials and the conservation scientist who wishes to carry out structural studies of metallic objects of art will find this publication quite useful.
Download or read book Scientific Modeling and Simulations written by Sidney Yip and published by Springer Science & Business Media. This book was released on 2010-04-07 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although computational modeling and simulation of material deformation was initiated with the study of structurally simple materials and inert environments, there is an increasing demand for predictive simulation of more realistic material structure and physical conditions. In particular, it is recognized that applied mechanical force can plausibly alter chemical reactions inside materials or at material interfaces, though the fundamental reasons for this chemomechanical coupling are studied in a material-speci c manner. Atomistic-level s- ulations can provide insight into the unit processes that facilitate kinetic reactions within complex materials, but the typical nanosecond timescales of such simulations are in contrast to the second-scale to hour-scale timescales of experimentally accessible or technologically relevant timescales. Further, in complex materials these key unit processes are “rare events” due to the high energy barriers associated with those processes. Examples of such rare events include unbinding between two proteins that tether biological cells to extracellular materials [1], unfolding of complex polymers, stiffness and bond breaking in amorphous glass bers and gels [2], and diffusive hops of point defects within crystalline alloys [3].
Download or read book Microstructural Design by Solidification Processing written by Enrique J. Lavernia and published by Tms. This book was released on 1992 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent successes in developing new and novel materials with unusual combinations of microstructure and properties have been based upon the ability to develop their desired characteristics by exercising engineered microstructural design prior to, and intelligent control during, processing.
Download or read book Microstructure and Properties of Materials written by J C M Li and published by World Scientific Publishing Company. This book was released on 2000-10-09 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second volume of an advanced textbook on microstructure and properties of materials. (The first volume is on aluminum alloys, nickel-based superalloys, metal matrix composites, polymer matrix composites, ceramics matrix composites, inorganic glasses, superconducting materials and magnetic materials). It covers titanium alloys, titanium aluminides, iron aluminides, iron and steels, iron-based bulk amorphous alloys and nanocrystalline materials. There are many elementary materials science textbooks, but one can find very few advanced texts suitable for graduate school courses. The contributors to this volume are experts in the subject, and hence, together with the first volume, it is a good text for graduate microstructure courses. It is a rich source of design ideas and applications, and will provide a good understanding of how microstructure affects the properties of materials. Chapter 1, on titanium alloys, covers production, thermomechanical processing, microstructure, mechanical properties and applications. Chapter 2, on titanium aluminides, discusses phase stability, bulk and defect properties, deformation mechanisms of single phase materials and polysynthetically twinned crystals, and interfacial structures and energies between phases of different compositions. Chapter 3, on iron aluminides, reviews the physical and mechanical metallurgy of Fe3Al and FeAl, the two important structural intermetallics. Chapter 4, on iron and steels, presents methodology, microstructure at various levels, strength, ductility and strengthening, toughness and toughening, environmental cracking and design against fracture for many different kinds of steels. Chapter 5, on bulk amorphous alloys, covers the critical cooling rate and the effect of composition on glass formation and the accompanying mechanical and magnetic properties of the glasses. Chapter 6, on nanocrystalline materials, describes the preparation from vapor, liquid and solid states, microstructure including grain boundaries and their junctions, stability with respect to grain growth, particulate consolidation while maintaining the nanoscale microstructure, physical, chemical, mechanical, electric, magnetic and optical properties and applications in cutting tools, superplasticity, coatings, transformers, magnetic recordings, catalysis and hydrogen storage.
Download or read book Handbook of Mechanical Alloy Design written by George E. Totten and published by CRC Press. This book was released on 2003-11-21 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering one of the field's most thorough treatments of material design principles, including a concise overview of fastener design, the Handbook of Mechanical Alloy Design provides an extensive overview of the effects of alloy compositional design on expected mechanical properties. This reference highlights the design elements that must be considered in risk-based metallurgical design and covers alloy design for a broad range of materials, including the increasingly important powder metal and metal matrix alloys. It discusses the design issues associated with carbon, alloy, and tool steels, microalloyed steels, and more. The Handbook of Mechanical Alloy Design is a must-have reference.
Download or read book Engineering Materials 2 written by Michael F. Ashby and published by Elsevier. This book was released on 2014-06-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough explanation of the basic properties of materials; of how these can be controlled by processing; of how materials are formed, joined and finished; and of the chain of reasoning that leads to a successful choice of material for a particular application. The materials covered are grouped into four classes: metals, ceramics, polymers and composites. Each class is studied in turn, identifying the families of materials in the class, the microstructural features, the processes or treatments used to obtain a particular structure and their design applications. The text is supplemented by practical case studies and example problems with answers, and a valuable programmed learning course on phase diagrams.
Download or read book The Microstructure and Design of Alloys written by and published by . This book was released on 1973 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium Alloys written by Jan Sieniawski and published by BoD – Books on Demand. This book was released on 2013-05-15 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains six chapters and covers topics dealing with biomedical applications of titanium alloys, surface treatment, relationships between microstructure and mechanical and technological properties, and the effect of radiation on the structure of the titanium alloys.
