Download or read book Allowable Stresses in Piles written by M. T. Davisson and published by . This book was released on 1983 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study presents methods for establishing allowable stresses in steel, concrete, and timber piles using load/resistance factor concepts. These methods take into account not only the material properties of the pile itself but also the individual effects of long term loads, driving stresses and drivability, imperfections in form or material and various environmental conditions which tend to reduce pile capacity. Using the results of the study, changes in Section 4, Division 1 of the AASHTO Standard Specifications for Highway Bridges, are proposed. The study is limited to the design of the pile as a structural member.
Download or read book The Application of Stress wave Theory to Piles written by Jaime Alberto dos Santos and published by IOS Press. This book was released on 2008 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This volume contains 101 papers presented at the 8th International Conference on the Application of Stress Wave Theory to Piles, held in Lisbon, Portugal in 2008." "It is divided in 14 chapters according to the conference themes: Wave mechanics applied to pile engineering; Relationship between static resistance to driving and long-term static soil resistance; Case histories involving measurementand analysis of stress waves; Dynamic monitoring of driven piles; Dynamic soil-pile interaction models - numerical and physical modeling; High-strain dynamic test; Low-strain dynamic test; Rapid-load test; Monitoring and analysis of vibratory driven piles; Correlation of dynamic and static load tests; Quality assurance of deep foundations using dynamic methods; Incorporation of dynamic testing into design codes and testing standards; Ground vibrations induced by pile motions; Dynamic measurements in ground field testing." "This conference aims to contribute to a better and more efficient professional interaction between specialized contractors, designers and academicians. By joining the contribution of all of them it was possible to elucidate the today's state-of-the-art in science, technology and practice in the application of stress wave theory to piles."--BOOK JACKET.
Download or read book Allowable Stress in Piles written by United States. Federal Highway Administration and published by . This book was released on 1983 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Standard Specifications for Highway Bridges written by American Association of State Highway and Transportation Officials and published by AASHTO. This book was released on 2002 with total page 1054 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Applications of Raft Foundations written by J. A. Hemsley and published by Thomas Telford. This book was released on 2000 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines alternative design procedures for plain and piled raft foundations. It explores the assumptions that are made in the analysis of soil - structure interaction, together with the associated calculation methods. The book gives many examples of project applications covering a wide range of structural forms and ground conditions.
Download or read book Pile Foundations in Engineering Practice written by Shamsher Prakash and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a concise, systematic and complete treatment of the design and construction of pile foundations. Discusses pile behavior under various loadings and types of piles and their installation, including consideration of soil parameters. It provides step-by-step design procedures for piles subject to vertical loading and pullout, lateral, inclined and eccentric loads, or dynamic loads, and for piles in permafrost. Also describes load test procedures and their interpretation and buckling of long, slender piles with and without supported length. The closing chapter presents case histories of prediction and performance of piles and pile groups. Includes numerous solved problems.
Download or read book An Introduction to Pile Capacities for Foundations written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2018-07-05 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil, geotechnical and structural engineers interested in piles for foundations of structures. Here is what is discussed: 1. GENERAL 2. DESIGN CRITERIA 3. PILE CAPACITY.
Download or read book An Introduction to Pile Capacities for Foundations for Professional Engineers written by J. Paul Guyer and published by Guyer Partners. This book was released on 2022-12-19 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil engineers, structural engineers, geotechnical engineers and construction managers interested pile construction for buildings and infrastructure. Here is what is discussed: 1. GENERAL, 2. DESIGN CRITERIA, 3. PILE CAPACITY.
Download or read book Allowable Stresses in Piles written by and published by . This book was released on 1984 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pile Design and Construction Practice written by Willis H. Thomas and published by CRC Press. This book was released on 2007-12-06 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This international handbook is essential for geotechnical engineers and engineering geologists responsible for designing and constructing piled foundations. It explains general principles and practice and details current types of pile, piling equipment and methods. It includes calculations of the resistance of piles to compressive loads, pile group
Download or read book An Introduction to Analysis and Design of Pile Foundations written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2018-11-08 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil and geotechnical engineers and construction managers interested in design and construction of pile supported foundations. Here is what is discussed: 1. GENERAL 2. DESIGN CRITERIA 3. PILE CAPACITY 4. SETTLEMENT 5. PILE GROUP ANALYSIS.
Download or read book Behavior of Deep Foundations written by Raymond Lundgren and published by ASTM International. This book was released on 1979 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geotechnical Engineering Handbook written by Braja M. Das and published by J. Ross Publishing. This book was released on 2011 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Geotechnical Engineering Handbook brings together essential information related to the evaluation of engineering properties of soils, design of foundations such as spread footings, mat foundations, piles, and drilled shafts, and fundamental principles of analyzing the stability of slopes and embankments, retaining walls, and other earth-retaining structures. The Handbook also covers soil dynamics and foundation vibration to analyze the behavior of foundations subjected to cyclic vertical, sliding and rocking excitations and topics addressed in some detail include: environmental geotechnology and foundations for railroad beds.
Download or read book Standard Practice for Establishing Allowable Stresses for Round Timber Piles written by and published by . This book was released on 2003 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pile Design and Construction Rules of Thumb written by Ruwan Abey Rajapakse and published by Butterworth-Heinemann. This book was released on 2016-02-20 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pile Design and Construction Rules of Thumb presents Geotechnical and Civil Engineers a comprehensive coverage of Pile Foundation related theory and practice. Based on the author’s experience as a PE, the book brings concise theory and extensive calculations, examples and case studies that can be easily applied by professional in their day-to-day challenges. In its first part, the book covers the fundamentals of Pile Selection: Soil investigation, condition, pile types and how to choose them. In the second part it addresses the Design of Pile Foundations, including different types of soils, pile groups, pile settlement and pile design in rock. Next, the most extensive part covers Design Strategies and contains chapters on loading analysis, load distribution, negative skin friction, design for expansive soils, wave equation analysis, batter piles, seismic analysis and the use of softwares for design aid. The fourth part covers Construction Methods including hammers, Inspection, cost estimation, load tests, offshore piling, beams and caps. In this new and updated edition the author has incorporated new pile designs such as helical, composite, wind turbine monopiles, and spiral coil energy piles. All calculations have been updated to most current materials characteristics and designs available in the market. Also, new chapters on negative skin friction, pile driving, and pile load testing have been added. Practicing Geotechnical, and Civil Engineers will find in this book an excellent handbook for frequent consult, benefiting from the clear and direct calculations, examples, and cases. Civil Engineering preparing for PE exams may benefit from the extensive coverage of the subject. Convenient for day-to-day consults Numerous design examples for sandy soils, clay soils, and seismic loadings Now including helical, composite, wind turbine monopiles, and spiral coil energy piles Methodologies and case studies for different pile types Serves as PE exam preparation material
Download or read book Application of Stress Wave Theory to Piles Quality Assurance on Land and Offshore Piling written by J. Beim and published by CRC Press. This book was released on 2000-01-01 with total page 791 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work collates the topics discussed in the sixth International Conference on land and offshore piling. It covers topics such as: wave mechanics and its application to pile mechanics; driving equipment and developments; and pile integrity and low strain dynamic testing.
Download or read book Pile Design and Construction Practice written by Michael Tomlinson and published by CRC Press. This book was released on 2014-10-08 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written to Eurocode 7 and the UK National AnnexUpdated to reflect the current usage of Eurocode 7, along with relevant parts of the British Standards, Pile Design and Construction Practice, Sixth Edition maintains the empirical correlations of the original-combining practical know how with scientific knowledge-and emphasizing relevant principles an
