Download or read book Alkali Activated Materials in Environmental Technology Applications written by Tero Luukkonen and published by Woodhead Publishing. This book was released on 2022-08-04 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alkali-activated materials, including geopolymers, are being studied at an increasing pace for various high-value applications. The main drivers for this emerging interest include the low-energy, low-cost, and readily up-scalable manufacturing process; the possibility to utilize industrial wastes and by-products as raw materials; and beneficial material properties comparable to conventional materials. It has already been verified that alkali-activated materials are very versatile in environmental technology applications for pollution control. The current research in the field focuses on advanced manufacturing methods, material properties, and applications, for example, additive manufacturing, modification of surface chemistry, CO2 capture, and green catalysis. Alkali-Activated Materials in Environmental Technology Applications discusses what novel possibilities alkali-activated materials provide in comparison to conventional materials (such as high-temperature ceramics, synthetic zeolites, or organic polymers). The specific environmental applications that are covered include water and wastewater treatment, air pollution control, stabilization/solidification of hazardous wastes, and catalysts in chemical processes. In addition, preparation methods, material properties, and the chemistry of alkali-activated materials are revisited from the viewpoint of environmental technology applications. This book also discusses how well alkali-activated materials fit under the concepts of green chemistry and circular economy and how the life cycle analysis of these materials compares to conventional materials. Provides detailed information on preparation methods, material properties, and chemistry of alkali-activated materials for environmental technology applications Covers applications in water and wastewater treatment, air pollution control, solidification/stabilization of hazardous wastes; antimicrobial materials, and catalysis Discussed the performance of alkali-activated materials against conventional materials such as high-temperature ceramics, synthetic zeolites, or plastics Features case studies and bench/pilot-scale studies

Download or read book Handbook of Alkali Activated Cements Mortars and Concretes written by F. Pacheco-Torgal and published by Elsevier. This book was released on 2014-11-20 with total page 855 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an updated state-of-the-art review on new developments in alkali-activation. The main binder of concrete, Portland cement, represents almost 80% of the total CO2 emissions of concrete which are about 6 to 7% of the Planet’s total CO2 emissions. This is particularly serious in the current context of climate change and it could get even worse because the demand for Portland cement is expected to increase by almost 200% by 2050 from 2010 levels, reaching 6000 million tons/year. Alkali-activated binders represent an alternative to Portland cement having higher durability and a lower CO2 footprint. Reviews the chemistry, mix design, manufacture and properties of alkali-activated cement-based concrete binders Considers performance in adverse environmental conditions. Offers equal emphasis on the science behind the technology and its use in civil engineering.

Download or read book Alkali Activated Materials written by John L. Provis and published by Springer Science & Business Media. This book was released on 2013-11-19 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a State of the Art Report resulting from the work of RILEM Technical Committee 224-AAM in the period 2007-2013. The Report summarises research to date in the area of alkali-activated binders and concretes, with a particular focus on the following areas: binder design and characterisation, durability testing, commercialisation, standardisation, and providing a historical context for this rapidly-growing research field.

Download or read book Alkali Activated Cements and Concretes written by Caijun Shi and published by CRC Press. This book was released on 2006-05-10 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first English-language book which reviews and summarizes worldwide research advances in alkali-activated cements and concrete. Essential topics include: raw materials and their properties for the production of the two new types of binder the hydration and microstructure development of alkali-activated slag cements the mechanical properties and durability of alkali-activated slag cement and concrete other various cementing systems and their applications related standards and specifications. This respected team of authors has produced an important piece of research that will be of great interest to professionals and academics alike, enabling the production of more durable and environmentally sensitive materials.

Download or read book New Materials in Civil Engineering written by Pijush Samui and published by Butterworth-Heinemann. This book was released on 2020-07-07 with total page 1105 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Materials in Civil Engineering provides engineers and scientists with the tools and methods needed to meet the challenge of designing and constructing more resilient and sustainable infrastructures. This book is a valuable guide to the properties, selection criteria, products, applications, lifecycle and recyclability of advanced materials. It presents an A-to-Z approach to all types of materials, highlighting their key performance properties, principal characteristics and applications. Traditional materials covered include concrete, soil, steel, timber, fly ash, geosynthetic, fiber-reinforced concrete, smart materials, carbon fiber and reinforced polymers. In addition, the book covers nanotechnology and biotechnology in the development of new materials. Covers a variety of materials, including fly ash, geosynthetic, fiber-reinforced concrete, smart materials, carbon fiber reinforced polymer and waste materials Provides a “one-stop resource of information for the latest materials and practical applications Includes a variety of different use case studies

Download or read book Applications Performance Characteristics and Environmental Benefits of Alkali Activated Binder Concretes written by Andrew Dunster and published by . This book was released on 2013-06 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Cementitious Materials written by Herbert Pöllmann and published by Walter de Gruyter GmbH & Co KG. This book was released on 2017-12-18 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aside from water the materials which are used by mankind in highest quantities arecementitious materials and concrete. This book shows how the quality of the technical product depends on mineral phases and their reactions during the hydration and strengthening process. Additives and admixtures infl uence the course of hydration and the properties. Options of reducing the CO2-production in cementitious materials are presented and numerous examples of unhydrous and hydrous phases and their formation conditions are discussed. This editorial work consists of four parts including cement composition and hydration, Special cement and binder mineral phases, Cementitious and binder materials, and Measurement and properties. Every part contains different contributions and covers a broad range within the area. Contents Part I: Cement composition and hydration Diffraction and crystallography applied to anhydrous cements Diffraction and crystallography applied to hydrating cements Synthesis of highly reactive pure cement phases Thermodynamic modelling of cement hydration: Portland cements – blended cements – calcium sulfoaluminate cements Part II: Special cement and binder mineral phases Role of hydrotalcite-type layered double hydroxides in delayed pozzolanic reactions and their bearing on mortar dating Setting control of CAC by substituted acetic acids and crystal structures of their calcium salts Crystallography and crystal chemistry of AFm phases related to cement chemistry Part III: Cementitious and binder materials Chemistry, design and application of hybrid alkali activated binders Binding materials based on calcium sulphates Magnesia building material (Sorel cement) – from basics to application New CO2-reduced cementitious systems Composition and properties of ternary binders Part IV: Measurement and properties Characterization of microstructural properties of Portland cements by analytical scanning electron microscopy Correlating XRD data with technological properties No cement production without refractories

Download or read book Calcined Clays for Sustainable Concrete written by Karen Scrivener and published by Springer. This book was released on 2015-06-07 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on research and practical issues linked to Calcined Clays for Sustainable Concrete. The main subjects are geology of clays, hydration and performance of blended system with calcined clays, alkali activated binders, economic and environmental impacts of the use of calcined clays in cement based materials. Topics addressed in this book include the influence of processing on reactivity of calcined clays, influence of clay mineralogy on reactivity, geology of clay deposits, Portland-calcined clay systems, hydration, durability, performance, Portland-calcined clay-limestone systems, hydration, durability, performance, calcined clay-alkali systems, life cycle analysis, economics and environmental impact of use of calcined clays in cement and concrete and field applications. This book compiles the different contributions of the 1st International Conference on Calcined Clays for Sustainable Concrete, which took place in Lausanne, Switzerland, June, 23-25, 2015.The papers present the latest research in their field. It contains nearly 80 papers and abstracts. Overall, this work gives a broad view of research on calcined clays in the field of construction and will stimulate further research into calcined clays for sustainable concrete.

Download or read book Fly Ash written by Prabir Kumar Sarker and published by Nova Science Publishers. This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fly ash is a by-product of the combustion of coal and other waste materials. In recent years, there has been intensive research on fly ash because of the increasing demand for the recycling of industrial by-products to improve sustainability in manufacturing and infrastructure. This book presents some of the latest developments in the generation, characterisation, utilisation and environmental impacts of fly ash. Recent developments on the methods of collection and analysis of fly ash, and novel applications such as in geopolymers and recovery of resources from fly ash are included. The book is intended for professionals in research and academics, and students interested in materials and sustainability. The book consists of 17 chapters contributed by 42 authors. Each chapter ends with an extensive list of references for further information. The topics on fly ash have been grouped into the following three parts: Part 1: various sources, methods of collection, factors influencing collection efficiency, flow and hydrodynamic behaviours, methods of characterisation, physical, chemical, leaching and radiation properties, and extraction of metals from fly ash; Part 2: different technological initiatives on utilisation, applications in the construction industry, use as a supplementary cementitious material, alkali-activated binder, polypropylene composite materials, and behaviour of fly ash geopolymer concrete; and Part 3: health and environmental issues such as the effects on lung and heart, bioleaching for detoxification, ash from incinerated wastes, and lifecycle assessment of civil structures using fly ash.

Download or read book Cell Culture Engineering written by Wei-Shu Hu and published by Springer. This book was released on 2006-08-16 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the introduction of recombinant human growth hormone and insulin a quarter century ago, protein therapeutics has greatly broadened the ho- zon of health care. Many patients suffering with life-threatening diseases or chronic dysfunctions, which were medically untreatable not long ago, can attest to the wonder these drugs have achieved. Although the ?rst generation of p- tein therapeutics was produced in recombinant Escherichia coli, most recent products use mammalian cells as production hosts. Not long after the ?rst p- duction of recombinant proteins in E. coli, it was realized that the complex tasks of most post-translational modi?cations on proteins could only be ef?ciently carried out in mammalian cells. In the 1990s, we witnessed a rapid expansion of mammalian-cell-derived protein therapeutics, chie?y antibodies. In fact, it has been nearly a decade since the market value of mammalian-cell-derived protein therapeutics surpassed that of those produced from E. coli. A common characteristic of recent antibody products is the relatively large dose required for effective therapy, demanding larger quantities for the treatment of a given disease. This, coupled with the broadening repertoire of protein drugs, has rapidly expanded the quantity needed for clinical applications. The increasing demand for protein therapeutics has not been met exclusively by construction of new manufacturing plants and increasing total volume capacity. More - portantly the productivity of cell culture processes has been driven upward by an order of magnitude in the past decade.

Download or read book ALKALI ACTIVATED MATERIALS written by Mohammad Almakhadmeh and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensive researches were conducted on alkali-activated materials (AAM) as a green sustainable alternative for ordinary Portland cement (OPC). Recently, there was a shift to one-part alkali-activated materials to avoid the use of corrosive activator and also to reduce the carbon footprint. Most of the researches had focused on these powder activators types and impacts on the final product properties. However, limited research had investigated the interaction of these activators and other ingredients. Hence, the novelty of this work stems from studying these interactions and illustrating their effect on the developed One-Part AAM properties. Mixing water is a critical parameter in controlling the fresh and hardened properties of construction materials. Hence, the interaction between mixing water and the anhydrous activator was examined. Also, water effluents from various industrial recourses were tested. The study highlighted, for the first time, the role of water temperature in controlling the dissolution rate of solid activators. It emphasizes how this interaction can significantly change the fresh and hardened properties. On the other hand, superplasticizer and other chemical admixtures are commonly added to enhance cementitious materials flowability. However, the high alkalinity of AAM had drastically affected their effectiveness. Hence, a premixing technique was tested to produce AAM with high flowability. Various wastes, namely, red Mud, paper mill sludge, and paper mill fly ash, were examined as a potential precursor for AAM. The study showed the potential for developing a new smart, sustainable construction material/product incorporating such industrial wastes while maintaining adequate mechanical and durability performance. It is anticipated that the findings of this study will i) lead to saving energy/reducing fossil fuel consumption to heat water during cold weather concreting will increase the sustainability level of the construction sector, ii) replace or reduce the demand for admixtures leading to both economic and environmental benefits, and iii) reduce the amount of industrial wastes sent to reservoirs through recycling/reusing in various construction applications leading to social and environmental benefits. Also, the outcomes of this research will allow the industrial sector to economically and sustainably transforming wastes into a high-value product.

Download or read book Advances in Geopolymer Zeolite Composites written by Petrică Vizureanu and published by BoD – Books on Demand. This book was released on 2021-10-13 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geopolymers and zeolites as eco-friendly materials can participate in cutting-edge research and applications due to their tailored properties, including superabsorbent capacity, heavy metals encapsulation, flame retardancy, mechanical performance, electrokinetic behaviour, corrosion resistance, and thermal properties. This book joins activities and knowledge of researchers from multiple fields to present a comprehensive overview of the advances in synthesis and characterization of geopolymers and zeolites, including base chemistry concepts, nanoscale characterization, and applications in top-level industry.

Download or read book Handbook of advances in Alkali activated Concrete written by F Pacheco Torgal and published by Woodhead Publishing. This book was released on 2021-12-03 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances on Alkali-activated Concrete, provides comprehensive information on materials, structural properties and realistic potential for the application of alkali-activated concretes and cements. Divided over seven key parts, including the design of alkali-activated concrete, their fabrication and curing, rheology, properties of alkali-activated concrete, durability, dynamic performance and LCA, the book will be an essential reference resource for academic and industrial researchers, materials scientists, chemists, manufacturers and civil engineers working with alkali-activated materials and concrete structures. Provides an essential guide on the latest developments in alkali-activated concrete Comprehensively examines alkali-activated concrete performance under cyclic loading Includes concrete systems containing coarser aggregates Presents several important cases studies of application

Download or read book Nanotechnology in Eco efficient Construction written by Fernando Pacheco-Torgal and published by Woodhead Publishing. This book was released on 2018-11-22 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the latest technologies, Nanotechnology in eco-efficient construction provides an authoritative guide to the role of nanotechnology in the development of eco-efficient construction materials and sustainable construction. The book contains a special focus on applications concerning concrete and cement, as nanotechnology is driving significant development in concrete technologies. The new edition has 14 new chapters, including 3 new parts: Mortars and concrete related applications; Applications for pavements and other structural materials; and Toxicity, safety handling and environmental impacts. Civil engineers requiring an understanding of eco-efficient construction materials, as well as researchers and architects within any field of nanotechnology, eco-efficient materials or the construction industry will find this updated reference to be highly valuable. Addresses issues such as toxicity and LCA aspects New chapters covering safety handling on occupational exposure of nanoparticles and the assessment of personal exposure to airborne nanomaterials Discusses the effects of adding nano-particles on the durability and on the properties of geopolymers

Download or read book Environmental Technology and Sustainability written by Tamara Tatrishvili and published by CRC Press. This book was released on 2024-04-23 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new title covers the most recent theoretical and practical advancements in green technology for a clean and healthy environment. It aims to provide a better understanding of the research and development of new technologies that are becoming increasingly important for ensuring sustainability. The book provides vital information on advanced materials and green composites and expounds on environmental chemistry for a sustainable world, focusing on different characterization methods as well as new techniques. The volume also considers recent developments and applications of clean energy materials. It presents case studies that emphasize the green technologies being discussed.

Download or read book Application of Waste Materials in Lightweight Aggregates written by Franus Małgorzata and published by Taylor & Francis. This book was released on 2023-11-27 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Application of Waste Materials in Lightweight Aggregates presents the current state of knowledge on aggregates production methods, their characteristics, current standards and legal regulations. In addition, the book briefly discusses the issue of the presence of different types of waste in the environment (including municipal, agricultural, energy and mining industries), their characteristics and uses for the production of lightweight aggregates. This book serves as a source of academic information on the course and conditions of using various waste treatment processes for academics, engineers, professionals and students interested in environmental engineering, as well as for companies dealing with recycling and disposal of waste.

Download or read book Geopolymers written by J L Provis and published by Elsevier. This book was released on 2009-06-22 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: A geopolymer is a solid aluminosilicate material usually formed by alkali hydroxide or alkali silicate activation of a solid precursor such as coal fly ash, calcined clay and/or metallurgical slag. Today the primary application of geopolymer technology is in the development of reduced-CO2 construction materials as an alternative to Portland-based cements. Geopolymers: structure, processing, properties and industrial applications reviews the latest research on and applications of these highly important materials.Part one discusses the synthesis and characterisation of geopolymers with chapters on topics such as fly ash chemistry and inorganic polymer cements, geopolymer precursor design, nanostructure/microstructure of metakaolin and fly ash geopolymers, and geopolymer synthesis kinetics. Part two reviews the manufacture and properties of geopolymers including accelerated ageing of geopolymers, chemical durability, engineering properties of geopolymer concrete, producing fire and heat-resistant geopolymers, utilisation of mining wastes and thermal properties of geopolymers. Part three covers applications of geopolymers with coverage of topics such as commercialisation of geopolymers for construction, as well as applications in waste management.With its distinguished editors and international team of contributors, Geopolymers: structure, processing, properties and industrial applications is a standard reference for scientists and engineers in industry and the academic sector, including practitioners in the cement and concrete industry as well as those involved in waste reduction and disposal. Discusses the synthesis and characterisation of geopolymers with chapters covering fly ash chemistry and inorganic polymer cements Assesses the application and commercialisation of geopolymers with particular focus on applications in waste management Reviews the latest research on and applications of these highly important materials