Download or read book Bearing Steel Technology written by John M. Beswick and published by ASTM International. This book was released on 2007 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book AISTSSE 2018 written by Martina Restuati and published by European Alliance for Innovation. This book was released on 2019-10-04 with total page 1227 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of the The 5th Annual International Seminar on Trends in Science and Science Education (AISTSSE) and The 2nd International Conference on Innovation in Education, Science and Culture (ICIESC), where held on 18 October 2018 and 25 September 2018 in same city, Medan, North Sumatera. Both of conferences were organized respectively by Faculty of Mathematics and Natural Sciences and Research Institute, Universitas Negeri Medan. The papers from these conferences collected in a proceedings book entitled: Proceedings of 5th AISTSSE. In publishing process, AISTSSE and ICIESC were collaboration conference presents six plenary and invited speakers from Australia, Japan, Thailand, and from Indonesia. Besides speaker, around 162 researchers covering lecturers, teachers, participants and students have attended in this conference. The researchers come from Jakarta, Yogyakarta, Bandung, Palembang, Jambi, Batam, Pekanbaru, Padang, Aceh, Medan and several from Malaysia, and Thailand. The AISTSSE meeting is expected to yield fruitful result from discussion on various issues dealing with challenges we face in this Industrial Revolution (RI) 4.0. The purpose of AISTSSE is to bring together professionals, academics and students who are interested in the advancement of research and practical applications of innovation in education, science and culture. The presentation of such conference covering multi disciplines will contribute a lot of inspiring inputs and new knowledge on current trending about: Mathematical Sciences, Mathematics Education, Physical Sciences, Physics Education, Biological Sciences, Biology Education, Chemical Sciences, Chemistry Education, and Computer Sciences. Thus, this will contribute to the next young generation researches to produce innovative research findings. Hopely that the scientific attitude and skills through research will promote Unimed to be a well-known university which persist to be developed and excelled. Finally, we would like to express greatest thankful to all colleagues in the steering committee for cooperation in administering and arranging the conference. Hopefully these seminar and conference will be continued in the coming years with many more insight articles from inspiring research. We would also like to thank the invited speakers for their invaluable contribution and for sharing their vision in their talks. We hope to meet you again for the next conference of AISTSSE.
Download or read book Surface Coatings Technology written by B. D. Sartwell and published by Elsevier. This book was released on 2016-06-03 with total page 981 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface & Coatings Technology, Volume 61 presents the proceeding of the 20th International Conference on Metallurgical Coatings and Thin Films, held in San Diego, California, on April 19–23, 1993. This book discusses a variety of topics related to surface and coatings technology, including coatings for use at high temperature, hard coatings, and vapor deposition technology. Organized into 141 chapters, this compilation of papers begins with an overview of the coating requirements for long-life bucket protection, how each of these coating systems has performed, and the advantages and disadvantages of each. This text then discusses the gradient-free transition step achieved in the element analysis of the depth profiles. Other chapters consider the metastable yttrium oxide films that are synthesized using reactive sputter deposition. This book discusses as well the use of appropriate copper-based alloy coatings on structural components. The final chapter deals with the particle mechanical and thermal behavior in the process of high velocity oxy-fuel spraying. This book is a valuable resource for chemical engineers and metallurgists.
Download or read book Corrosion and Protection of Materials written by Marina Cabrini and published by MDPI. This book was released on 2021-04-06 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains thirty articles on various topics related to the corrosion and protection of metallic materials. This topic is of strong actuality both due to the aging of plants and infrastructures that require checks and maintenance, and to the use of traditional materials in increasingly aggressive environments, added to the need of changing the current anti-corrosion systems with less environmental impact methods. Finally, the new development of innovative materials, such as additive manufacturing or high-entropy alloys, needs the characterization of their corrosion behavior. In this issue, there are works on new alloys obtained for additive manufacturing or high entropy, on the study of corrosion and stress corrosion cracking and hydrogen embrittlement mechanisms, through electrochemical and microscopical techniques, studies on low environmental impact inhibitors and biocides, as well as ceramic and metal protective coatings. Finally, there are works on the study of the residual mechanical resistance of corroded infrastructures and on monitoring and non-destructive control. In this way, the book therefore offers a somewhat varied panorama of research trends in the field.
Download or read book Passivity and Localized Corrosion written by Masahiro Seo and published by The Electrochemical Society. This book was released on 1999 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Construction Safety written by N. A. Siddiqui and published by Springer Nature. This book was released on 2022-10-31 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the details of computer-aided tools & techniques for improving work culture and minimizing accidents. The construction industry has been considered for employing the highest number of workmen but at the same time, it is also known as a poorly organized sector because of peculiarity in construction. Since construction project activity keeps changing on an hourly basis, it becomes difficult to manage the safety of workers or workplace and therefore, it stands as the second accident-prone industry. Several tools and techniques are introduced in controlling construction accidents concerning time and improvements are recorded. This book has briefly covered various challenges encountered, gaps in implementation, technological developments, and various methods/techniques to reduce construction accidents and highlights of research need for overall improvement of safety. This book is essentially helpful for students, researchers, faculty, and industry professionals.
Download or read book Biomaterials in Clinical Practice written by Fatima Zivic and published by Springer. This book was released on 2017-10-20 with total page 823 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the properties of biomaterials that have found wide clinical applications, while also reviewing the state-of-the-art in the development towards future medical applications, starting with a brief introduction to the history of biomaterials used in hip arthroplasty. The book then reviews general types of biomaterials – polymers, ceramics, and metals, as well as different material structures such as porous materials and coatings and their applications – before exploring various current research trends, such as biodegradable and porous metals, shape memory alloys, bioactive biomaterials and coatings, and nanometals used in the diagnosis and therapy of cancer. In turn, the book discusses a range of methods and approaches used in connection with biomaterial properties and characterization – chemical properties, biocompatibility, in vivo behaviour characterisation, as well as genotoxicity and mutagenicity – and reviews various diagnostic techniques: histopathological analysis, imagining techniques, and methods for physicochemical and spectroscopic characterization. Properties of stent deployment procedures in cardiovascular surgeries, from aspects of prediction, development and deployment of stent geometries are presented on the basis of novel modelling approaches. The last part of the book presents the clinical applications of biomaterials, together with case studies in dentistry, knee and hip prosthesis. Reflecting the efforts of a multidisciplinary team of authors, gathering chemical engineers, medical doctors, physicists and engineers, it presents a rich blend of perspectives on the application of biomaterials in clinical practice. The book will provide clinicians with an essential review of currently available solutions in specific medical areas, also incorporating non-medical solutions and standpoints, thus offering them a broader selection of materials and implantable solutions. This work is the result of joint efforts of various academic and research institutions participating in WIMB Tempus project, 543898-TEMPUS-1-2013-1-ES-TEMPUS-JPHES, "Development of Sustainable Interrelations between Education, Research and Innovation at WBC Universities in Nanotechnologies and Advanced Materials where Innovation Means Business", co-funded by the Tempus Programme of the European Union.
Download or read book Laboratory Corrosion Tests and Standards written by Gardner S. Haynes and published by ASTM International. This book was released on 1985 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Medical Device Materials Iii written by Ramakrishna Venugopalan and published by ASM International. This book was released on 2006-01-01 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Materials & Processes for Medical Devices Conference focuses on the materials science and engineering aspects of the medical devices industry. Device manufacturers, materials providers, and clinicians share information and knowledge on materials and their properties. Coverage ranges from cardiovascular devices to orthopedics to dental appliances. --
Download or read book Proceedings of the 2nd Lawang Sewu International Symposium on Engineering and Applied Sciences LEWIS EAS 2023 written by Ilham Yustar Afif and published by Springer Nature. This book was released on 2024 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion and Degradation of Implant Materials written by B. C. Syrett and published by ASTM International. This book was released on 1979 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flexible Automation and Intelligent Manufacturing The Human Data Technology Nexus written by Kyoung-Yun Kim and published by Springer Nature. This book was released on 2023-02-03 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the second volume of the proceedings of the 31st edition of the International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2022, held on June 19 – 23, 2022, in Detroit, Michigan, USA. Covering four thematic areas including Manufacturing Processes, Machine Tools, Manufacturing Systems, and Enabling Technologies, it highlights advances in micro- and nanoscales processes, additive manufacturing, artificial intelligence and robotic applications, human-robot collaboration, as well as quality control, supply chain, industrial monitoring and management strategies. It also discusses important issues related to sustainability, waste management and remanufacturing. All in all, this book provides academicians, engineers and professionals with extensive information on both scientific and industrial advances in the converging fields of manufacturing, production, and automation.
Download or read book Hot Working Guide A Compendium of Processing Maps Second Edition written by Y.V.R.K. Prasad; K.P. Rao; S. Sasidhar and published by ASM International. This book was released on 2015-08-01 with total page 639 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hot Working Guide: A Compendium of Processing Maps, Second Edition is a unique source book with flow stress data for hot working, processing maps with metallurgical interpretation and optimum processing conditions for metals, alloys, intermetallics, and metal matrix composites. The use of this book replaces the expensive and time consuming trial and error methods in process design and product development.
Download or read book Global Design to Gain a Competitive Edge written by Xiu-Tian Yan and published by Springer Science & Business Media. This book was released on 2008-07-30 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent rapid globalisation of manufacturing industries leads to a drive and thirst for rapid advancements in technological development and expertise in the fields of advanced design and manufacturing, especially at their interfaces. This development results in many economical benefits to and improvement of quality of life for many people all over the world. Technically speaking, this rapid development also create many opportunities and challenges for both industrialists and academics, as the design requirements and constraints have completely changed in this global design and manufacture environment. Consequently the way to design, manufacture and realise products have changed as well. The days of designing for a local market and using local suppliers in manufacturing have gone, if enterprises aim to maintain their competitiveness and global expansion leading to further success. In this global context and scenario, both industry and the academia have an urgent need to equip themselves with the latest knowledge, technology and methods developed for engineering design and manufacture. To address this shift in engineering design and manufacture, supported by the European Commission under the Asia Link Programme with a project title FASTAHEAD (A Framework Approach to Strengthening Asian Higher Education in Advanced Design and Manufacture), three key project partners, namely the University of Strathclyde of the United Kingdom, Northwestern Polytechncial University of China, and the Troyes University of Technology of France organised a third international conference.
Download or read book Materials Development by Additive Manufacturing Techniques written by Paolo Fino and published by MDPI. This book was released on 2021-03-19 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) processes are gaining more and more attention from many industrial fields, mainly because they are revolutionizing the components’ designs and production lines. The complete industrialization of these processes has to be supported by the full understanding of correlation between AM building conditions and the final materials’ properties. Another critical aspect is that nowadays only a reduced number of materials processable by AM are available on the market. It is, therefore, fundamental to widen the materials’ portfolio, and to study and develop new materials that can take advantage of these unique building processes.
Download or read book Tribology and Surface Engineering written by Aleksander Lisiecki and published by MDPI. This book was released on 2020-01-15 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers very important issues, not only scientific in nature but, ultimately, for industry and the economy. Wear and deterioration of surface properties during operation is a natural and unavoidable phenomenon. However, minimizing the degree of wear is of great importance for the entire economy, as illustrated by the example of the US economy, for which the loss of natural resources as a direct cause of friction and wear exceeds 6% of the Gross National Product. This book showcases the valuable knowledge revealed from both theoretical and practical research results in the field of advanced technologies of coatings and surface modification, as well as wear and tribological characteristics of advanced materials and surface layers. Therefore, it is hoped that this book will be a valuable resource and helpful tool for scientists, engineers, and students in the field of surface engineering, materials science, and manufacturing engineering.
Download or read book Dissimilar Metal Welding written by Pierpaolo Carlone and published by MDPI. This book was released on 2019-12-12 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combination of distinct materials is a key issue in modern industry, whereas the driving concept is to design parts with the right material in the right place. In this framework, a great deal of attention is directed towards dissimilar welding and joining technologies. In the automotive sector, for instance, the concept of “tailored blanks”, introduced in the last decade, has further highlighted the necessity to weld dissimilar materials. As far as the aeronautic field is concerned, most structures are built combining very different materials and alloys, in order to match lightweight and structural performance requirements. In this framework, the application of fusion welding techniques, namely, tungsten inert gas or laser welding, is quite challenging due to the difference in physical properties, in particular the melting point, between adjoining materials. On the other hand, solid-state welding methods, such as the friction stir welding as well as linear friction welding processes, have already proved to be capable of manufacturing sound Al-Cu, Al-Ti, Al-SS, and Al-Mg joints, to cite but a few. Recently, promising results have also been obtained using hybrid methods. Considering the novelty of the topic, many relevant issues are still open, and many research groups are continuously publishing valuable results. The aim of this book is to finalize the latest contributions on this topic.
