Download or read book Deep Energy Retrofit A Guide for Decision Makers written by Alexander Zhivov and published by Springer Nature. This book was released on 2021-02-10 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many governments worldwide are setting more stringent targets for reductions in energy use in government/public buildings. Buildings constructed more than 10 years ago account for a major share of energy used by the building stock. However, the funding and “know-how” (applied knowledge) available for owner-directed energy retrofit projects has not kept pace with new requirements. With typical retrofit projects, reduction of energy use varies between 10 and 20%, while actual executed renovation projects show that energy use reduction can exceed 50%, and can cost-effectively achieve the Passive House standard or even approach net zero-energy status (EBC Annex 61 2017a, Hermelink and Müller 2010; NBI 2014; RICS 2013; Shonder and Nasseri 2015; Miller and Higgins 2015; Emmerich et al. 2011). Building energy efficiency (EE) ranks first in approaches with resource efficiency potential with a total resource benefit of approximately $700 billion until 2030. EE is by far the cheapest way to cut CO2 emissions (McKinsey 2011, IPCC 2007). However, according to an IEA study (IEA 2014a), more than 80% of savings potential in building sector remains untapped. Thus, the share of deployed EE in the building sector is lower than in the Industry, Transport, and Energy generation sectors. Estimates for the deep renovation potentials show: €600-900bn investment potential, €1000-1300bn savings potential, 70% energy-saving potential, and 90% CO2 reduction potential.
Download or read book Green Defense Technology written by Michael Evan Goodsite and published by Springer. This book was released on 2017-03-14 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the ways in which military installations and small cities can implement and integrate triple net planning and energy, water, and waste sustainability strategies into broad installation operational management, arrive at the best decision, create policy and communicate effectively to stakeholders. It explores current and emerging technologies, methods, and frameworks for energy conservation, efficiency, and renewable energy within the context of triple net zero implementation practice. Recognizing that the challenge extends beyond finding technological solutions to achieve triple net zero outcomes, the contributions also address the need for a systemic view in the planning phase, as well as adequate communication and policy measures and incentives.
Download or read book Transition to Sustainable Buildings written by Organisation for Economic Co-operation and Development and published by Organization for Economic Co-Operation & Developme. This book was released on 2013 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Buildings are the largest energy consuming sector in the world, and account for over one-third of total final energy consumption and an equally important source of carbon dioxide (CO2) emissions. Achieving significant energy and emissions reduction in the buildings sector is a challenging but achievable policy goal. Transition to Sustainable Buildings presents detailed scenarios and strategies to 2050, and demonstrates how to reach deep energy and emissions reduction through a combination of best available technologies and intelligent public policy. This IEA study is an indispensible guide for decision makers, providing informative insights on: cost-effective options, key technologies and opportunities in the buildings sector; solutions for reducing electricity demand growth and flattening peak demand; effective energy efficiency policies and lessons learned from different countries; future trends and priorities for ASEAN, Brazil, China, the European Union, India, Mexico, Russia, South Africa and the United States; implementing a systems approach using innovative products in a cost effective manner; and pursuing whole-building (e.g. zero energy buildings) and advanced-component policies to initiate a fundamental shift in the way energy is consumed.
Download or read book Ventilation and Energy Efficiency in Welding Shops written by Alexander Zhivov and published by Springer Nature. This book was released on 2021-11-02 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Guide is based on several decades of author’s research and practical experience in the areas of process optimization, ventilation and energy conservation in welding shops of auto manufacturing and maintenance facilities. The Guide will describe principles of Weld Fume Control, advanced ventilation systems for facilities with welding and allied processes and with energy conservation opportunities that result from the process related measures to reduce emission of fumes and gases and the building envelope improvements. The objectives of the Guide are to improve the health and safety in the industrial environment and offer strategies for energy conservation. The Guide is designed for engineers, production operators and energy managers.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-02 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Deep Energy Retrofit written by Alexander Zhivov and published by Springer Nature. This book was released on 2020-07-13 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides detailed information on how to set up Deep Energy Retrofits (DERs) in public buildings, and shares in-depth insights into the current status of the major technologies, strategies and best practice examples of how to cost-effectively combine them. Case studies from the U.S.A. and Europe show that that Deep Energy Retrofit can be achieved with a limited core technologies bundle readily available on the market. Characteristics of some of these core technology measures depend on the technologies available on an individual nation’s market, on the minimum requirements of national standards, and on economics (as determined by a life cycle cost analysis). Also, requirements to building envelope-related technologies (e.g., insulation levels, windows, vapor and water barriers, and requirements for building airtightness) depend on specific climate conditions. This Guide provides best practice examples of how to apply these technologies in different construction situations. High levels of energy use reduction using core technology bundles along with improvements in indoor climate and thermal comfort can be only achieved when a Deep Energy Retrofit adopts a quality assurance process. In addition to design, construction, commissioning, and post-occupancy phases of the quality assurance process, the Guide emphasizes the importance of clearly and concisely formulating and documenting the Owner’s goals, expectations, and requirements for the renovated building during development of the statement of work. Another important component of the quality assurance process is a procurement phase, during which bidders’ qualifications, their understanding of the scope of work and its requirements, and their previous experience are analyzed. The building sector holds the potential for tremendous improvements in terms of energy efficiency and reducing carbon emissions, and energy retrofits to the existing building stock represent a significant opportunity in the transition to a low-carbon future. Moreover, investing in highly efficient building materials and systems can replace long-term energy imports, contribute to cost cutting, and create a wealth of new jobs. Yet, while the technologies needed in order to improve energy efficiency are readily available, significant progress has not yet been made, and “best practices” for implementing building technologies and renewable energy sources are still relegated to small “niche” applications. Offering essential information on Deep Energy Retrofits, the book offers a valuable asset for architects, public authorities, project developers, and engineers alike.
Download or read book Publications of the National Institute of Standards and Technology 1988 Catalog written by Rebecca J. Pardee and published by . This book was released on 1989 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Air Infiltration Review written by and published by . This book was released on 1994 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1988 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Publications written by United States. National Bureau of Standards and published by . This book was released on 1989 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Insulation written by Frank J. Powell and published by ASTM International. This book was released on 1987 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CBRN and Hazmat Incidents at Major Public Events written by Daniel J. Kaszeta and published by John Wiley & Sons. This book was released on 2014-10-01 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sets forth what to do and what not to do to keep people and property safe Based on the author's more than two decades of managing core facets of emergency planning and response, this book enables readers to minimize the possibility of a chemical, biological, radiological, or nuclear (CBRN) disaster or a hazardous material (hazmat) incident at public events. Moreover, it sets forth the tools needed to quickly respond to an incident in order to avoid or minimize casualties and damages. With its comprehensive approach, the book equips readers to plan for and manage a multi-disciplinary safety and emergency response team, including police, security, medical, military, and fire and civil protection personnel. CBRN and Hazmat Incidents at Major Public Events examines all aspects of security planning and emergency response, including: General planning and preparedness procedures such as initial considerations, response network development, and training and exercise Planning and preparedness for security and emergency response providers, including medical, fire, police, military, and VIP protection personnel Incident response, including initial response, detection and identification, and law enforcement Lastly, the author provides fourteen specific public event scenarios, explaining what to do and what not to do for effective emergency planning and response to CBRN and hazmat incidents. These scenarios also set the foundation for preparedness training and exercises. Throughout the book, sidebars summarize the author's extensive operational and managerial experience, helping readers focus on the core tested and proven strategies and techniques needed to prevent or mitigate the impact of a CBRN or hazmat incident. With its unique focus on CBRN and hazmats, this book is essential reading for all personnel charged with protecting lives and property at large public events.
Download or read book Building Adaptation written by James Douglas and published by Routledge. This book was released on 2006-08-11 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: As existing buildings age, nearly half of all construction activity in Britain is related to maintenance, refurbishment and conversions. Building adaptation is an activity that continues to make a significant contribution to the workload of the construction industry. Given its importance to sustainable construction, the proportion of adaptation works in relation to new build is likely to remain substantial for the foreseeable future, especially in the developed parts of the world. Building Adaptation, Second Edition is intended as a primer on the physical changes that can affect older properties. It demonstrates the general principles, techniques, and processes needed when existing buildings must undergo alteration, conversion, extension, improvement, or refurbishment. The publication of the first edition of Building Adaptation reflected the upsurge in refurbishment work. The book quickly established itself as one of the core texts for building surveying students and others on undergraduate and postgraduate built environment courses. This new edition continues to provide a comprehensive introduction to all the key issues relating to the adaptation of buildings. It deals with any work to a building over and above maintenance to change its capacity, function or performance.
Download or read book Pretty Good House written by Michael Maines and published by Taunton Press. This book was released on 2022-05-24 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pretty Good House provides a framework and set of guidelines for building or renovating a high-performance home that focus on its inhabitants and the environment--but keeps in mind that few people have pockets deep enough to achieve a "perfect" solution. The essential idea is for homeowners to work within their financial and practical constraints both to meet their own needs and do as much for the planet as possible. A Pretty Good House is: * A house that's as small as possible * Simple and durable, but also well designed * Insulated and air-sealed * Above all, it is affordable, healthy, responsible, and resilient.
Download or read book NBS Special Publication written by and published by . This book was released on 1978 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Global Energy Assessment written by GEA Writing Team and published by Cambridge University Press. This book was released on 2012-08-27 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The Global Energy Assessment (GEA) brings together over 300 international researchers to provide an independent, scientifically based, integrated and policy-relevant analysis of current and emerging energy issues and options. It has been peer-reviewed anonymously by an additional 200 international experts. The GEA assesses the major global challenges for sustainable development and their linkages to energy; the technologies and resources available for providing energy services; future energy systems that address the major challenges; and the policies and other measures that are needed to realize transformational change toward sustainable energy futures. The GEA goes beyond existing studies on energy issues by presenting a comprehensive and integrated analysis of energy challenges, opportunities and strategies, for developing, industrialized and emerging economies. This volume is an invaluable resource for energy specialists and technologists in all sectors (academia, industry and government) as well as policymakers, development economists and practitioners in international organizations and national governments.
Download or read book Building Technology Publications written by Center for Building Technology and published by . This book was released on 1978 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: