Download or read book Advances in Aircraft Brakes and Tires written by Robert Kyle Schmidt and published by SAE International. This book was released on 2015-08-24 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: An aircraft’s interface with the ground—through its wheels, tires, and brakes—is critical to ensure safe and reliable operation, demanding constant technology development. Significant advancements have occurred with almost all civil airliners entering service with radial tires, and with the Boeing 787 having entered service in 2011 with electrically actuated carbon-carbon brakes. This book is divided into three sections: tires, control systems, and brakes, presenting a selection of the most relevant papers published by SAE International on these matters in the past fifteen years. They have been chosen to provide significant interest to those engineers working in the landing gear field. With almost all current large civil aircraft (and many smaller aircraft) opting exclusively for carbon-carbon brakes, a number of papers addressing the challenges of this technology are included. Papers touching on tire behavior and papers discussing brake control strategies are provided. For those looking for more information on aircraft landing gears, brakes, and tires, the SAE A-5 committee (the Aerospace Landing Gear Systems Committee), which meets twice a year, serves as a useful forum for discussion on landing gear issues and development. A current listing of documents produced and maintained by the A-5 committee is included in the appendix.
Download or read book The Design of Aircraft Landing Gear written by Robert Kyle Schmidt and published by SAE International. This book was released on 2021-02-18 with total page 1092 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aircraft landing gear and its associated systems represent a compelling design challenge: simultaneously a system, a structure, and a machine, it supports the aircraft on the ground, absorbs landing and braking energy, permits maneuvering, and retracts to minimize aircraft drag. Yet, as it is not required during flight, it also represents dead weight and significant effort must be made to minimize its total mass. The Design of Aircraft Landing Gear, written by R. Kyle Schmidt, PE (B.A.Sc. - Mechanical Engineering, M.Sc. - Safety and Aircraft Accident Investigation, Chairman of the SAE A-5 Committee on Aircraft Landing Gear), is designed to guide the reader through the key principles of landing system design and to provide additional references when available. Many problems which must be confronted have already been addressed by others in the past, but the information is not known or shared, leading to the observation that there are few new problems, but many new people. The Design of Aircraft Landing Gear is intended to share much of the existing information and provide avenues for further exploration. The design of an aircraft and its associated systems, including the landing system, involves iterative loops as the impact of each modification to a system or component is evaluated against the whole. It is rare to find that the lightest possible landing gear represents the best solution for the aircraft: the lightest landing gear may require attachment structures which don't exist and which would require significant weight and compromise on the part of the airframe structure design. With those requirements and compromises in mind,The Design of Aircraft Landing Gear starts with the study of airfield compatibility, aircraft stability on the ground, the correct choice of tires, followed by discussion of brakes, wheels, and brake control systems. Various landing gear architectures are investigated together with the details of shock absorber designs. Retraction, kinematics, and mechanisms are studied as well as possible actuation approaches. Detailed information on the various hydraulic and electric services commonly found on aircraft, and system elements such as dressings, lighting, and steering are also reviewed. Detail design points, the process of analysis, and a review of the relevant requirements and regulations round out the book content. The Design of Aircraft Landing Gear is a landmark work in the industry, and a must-read for any engineer interested in updating specific skills and students preparing for an exciting career.
Download or read book Aircraft Landing Gear Design written by Norman S. Currey and published by AIAA. This book was released on 1988 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the only book available today that covers military and commercial aircraft landing gear design. It is a comprehensive text that will lead students and engineers from the initial concepts of landing gear design through final detail design. The book provides a vital link in landing gear design technology from historical practices to modern design trends, and it considers the necessary airfield interface with landing gear design. The text is backed up by calculations, specifications, references, working examples.
Download or read book Advances in Aircraft Brakes and Tires written by Robert Kyle Schmidt and published by SAE International. This book was released on 2015-08-24 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: An aircraft’s interface with the ground—through its wheels, tires, and brakes—is critical to ensure safe and reliable operation, demanding constant technology development. Significant advancements have occurred with almost all civil airliners entering service with radial tires, and with the Boeing 787 having entered service in 2011 with electrically actuated carbon-carbon brakes. This book is divided into three sections: tires, control systems, and brakes, presenting a selection of the most relevant papers published by SAE International on these matters in the past fifteen years. They have been chosen to provide significant interest to those engineers working in the landing gear field. With almost all current large civil aircraft (and many smaller aircraft) opting exclusively for carbon-carbon brakes, a number of papers addressing the challenges of this technology are included. Papers touching on tire behavior and papers discussing brake control strategies are provided. For those looking for more information on aircraft landing gears, brakes, and tires, the SAE A-5 committee (the Aerospace Landing Gear Systems Committee), which meets twice a year, serves as a useful forum for discussion on landing gear issues and development. A current listing of documents produced and maintained by the A-5 committee is included in the appendix.
Download or read book QF32 written by Richard de Crespigny and published by Macmillan Publishers Aus.. This book was released on 2012-08-01 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: QF32 is the award winning bestseller from Richard de Crespigny, author of the forthcoming Fly!: Life Lessons from the Cockpit of QF32 On 4 November 2010, a flight from Singapore to Sydney came within a knife edge of being one of the world's worst air disasters. Shortly after leaving Changi Airport, an explosion shattered Engine 2 of Qantas flight QF32 - an Airbus A380, the largest and most advanced passenger plane ever built. Hundreds of pieces of shrapnel ripped through the wing and fuselage, creating chaos as vital flight systems and back-ups were destroyed or degraded. In other hands, the plane might have been lost with all 469 people on board, but a supremely experienced flight crew, led by Captain Richard de Crespigny, managed to land the crippled aircraft and safely disembark the passengers after hours of nerve-racking effort. Tracing Richard's life and career up until that fateful flight, QF32 shows exactly what goes into the making of a top-level airline pilot, and the extraordinary skills and training needed to keep us safe in the air. Fascinating in its detail and vividly compelling in its narrative, QF32 is the riveting, blow-by-blow story of just what happens when things go badly wrong in the air, told by the captain himself. Winner of ABIA Awards for Best General Non-fiction Book of the Year 2013 and Indie Awards' Best Non-fiction 2012 Shortlisted ABIA Awards' Book of the Year 2013
Download or read book Commercial Aviation in the Jet Era and the Systems that Make it Possible written by Thomas Filburn and published by Springer. This book was released on 2019-07-23 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the multiple systems that make commercial jet travel safe and convenient. The author starts by tracing the evolution of commercial jets from the Boeing 707 to the double decker Airbus A380. The next 7 chapters discuss flight controls, along with the high lift surfaces (flaps and slats) that are essential to allow high speed, low drag aircraft to take-off and land. The other systems include Engines/Nacelles, Cabin Pressurization and Air Conditioning systems, Landing Gear and brakes, Fuel Systems, Instruments/Sensors, and finally Deicing systems for the wings, nacelles and external air speed sensors. Case studies describe a significant accident that arose from a failure in the various systems described. The final chapter summarizes the past 60 years of jet travel and describe how these systems have created a cheaper, safer mode of travel than any other.
Download or read book Everything Explained for the Professional Pilot written by Richie Lengel and published by . This book was released on 2012 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Aircraft Flight Mechanics written by Thomas R. Yechout and published by AIAA. This book was released on 2003 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on a 15-year successful approach to teaching aircraft flight mechanics at the US Air Force Academy, this text explains the concepts and derivations of equations for aircraft flight mechanics. It covers aircraft performance, static stability, aircraft dynamics stability and feedback control.
Download or read book The Correlation of Aircraft Take off and Landing Characteristics with Airport Size written by Alan L. Morse and published by . This book was released on 1944 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Landing Gear Design for Light Aircraft written by Ladislao Pazmany and published by . This book was released on 1986 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Aeroplane written by and published by . This book was released on 1927 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Impact of Airport Pavement Deicing Products on Aircraft and Airfield Infrastructure written by Xianming Shi and published by Transportation Research Board. This book was released on 2008 with total page 67 pages. Available in PDF, EPUB and Kindle. Book excerpt: "TRB's Airport Cooperative Research Program (ACRP) Synthesis 6: Impact of Airport Pavement Deicing Products on Aircraft and Airfield Infrastructure explores how airports chemically treat their airport pavements to mitigate snow and ice, and the chemicals used. The report also examines the effects of pavement deicing products on aircraft and airfield infrastructure, and highlights knowledge gaps in the subject"--Publisher's description.
Download or read book Aircraft Design written by Ajoy Kumar Kundu and published by Cambridge University Press. This book was released on 2010-04-12 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aircraft Design explores fixed winged aircraft design at the conceptual phase of a project. Designing an aircraft is a complex multifaceted process embracing many technical challenges in a multidisciplinary environment. By definition, the topic requires intelligent use of aerodynamic knowledge to configure aircraft geometry suited specifically to the customer's demands. It involves estimating aircraft weight and drag and computing the available thrust from the engine. The methodology shown here includes formal sizing of the aircraft, engine matching, and substantiating performance to comply with the customer's demands and government regulatory standards. Associated topics include safety issues, environmental issues, material choice, structural layout, understanding flight deck, avionics, and systems (for both civilian and military aircraft). Cost estimation and manufacturing considerations are also discussed. The chapters are arranged to optimize understanding of industrial approaches to aircraft design methodology. Example exercises from the author's industrial experience dealing with a typical aircraft design are included.
Download or read book Behavior of aircraft antiskid braking systems on dry and wet runway surfaces written by Sandy M. Stubbs and published by . This book was released on 1979 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Code of Federal Regulations written by and published by . This book was released on 1980 with total page 1228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special edition of the Federal Register, containing a codification of documents of general applicability and future effect ... with ancillaries.
Download or read book The Code of Federal Regulations of the United States of America written by and published by . This book was released on 1971 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Code of Federal Regulations is the codification of the general and permanent rules published in the Federal Register by the executive departments and agencies of the Federal Government.
Download or read book Certification of Normal Category Rotorcraft written by United States. Federal Aviation Administration and published by . This book was released on 1985 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt:
