Download or read book Aircraft Conceptual Design Synthesis written by Denis Howe and published by . This book was released on 2000 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aircraft Conceptual Design Synthesis means design by fitness-for-purpose. Design engineers can jump off from the point of given parameters and requirements – required performance, payloads and other factors. This is the first book for the aeronautical designer devoted to guiding the reader through this highly effective conceptual design synthesis process. This forms the procedure for the initial stage of the aircraft design process – the interpretation of a requirement into the preliminary layout. A logical design sequence is developed utilizing original modules to represent propulsion, lift, drag, mass, and performance. Aircraft Conceptual Design Synthesis includes a disk of spreadsheets that provides core data. Unlike existing approaches, the design synthesis method can be applied to novel aircraft concepts. CONTENTS INCLUDE The design process Aircraft configuration Flight regime and powerplant considerations Fuselage layout Configuration of the wing Basic lift, drag and mass representations Performance estimation Parametric analysis and optimisation Analysis of concept design “This is an important landmark book and in my view will become a standard by which others will be compared” – Dr E C P Ransom, Kingston University, UK

Download or read book Integration of Aircraft Systems Into Conceptual Design Synthesis written by Tim Lammering and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Aircraft Design written by Egbert Torenbeek and published by John Wiley & Sons. This book was released on 2013-05-28 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the overall appearance of modern airliners has not changed a lot since the introduction of jetliners in the 1950s, their safety, efficiency and environmental friendliness have improved considerably. Main contributors to this have been gas turbine engine technology, advanced materials, computational aerodynamics, advanced structural analysis and on-board systems. Since aircraft design became a highly multidisciplinary activity, the development of multidisciplinary optimization (MDO) has become a popular new discipline. Despite this, the application of MDO during the conceptual design phase is not yet widespread. Advanced Aircraft Design: Conceptual Design, Analysis and Optimization of Subsonic Civil Airplanes presents a quasi-analytical optimization approach based on a concise set of sizing equations. Objectives are aerodynamic efficiency, mission fuel, empty weight and maximum takeoff weight. Independent design variables studied include design cruise altitude, wing area and span and thrust or power loading. Principal features of integrated concepts such as the blended wing and body and highly non-planar wings are also covered. The quasi-analytical approach enables designers to compare the results of high-fidelity MDO optimization with lower-fidelity methods which need far less computational effort. Another advantage to this approach is that it can provide answers to “what if” questions rapidly and with little computational cost. Key features: Presents a new fundamental vision on conceptual airplane design optimization Provides an overview of advanced technologies for propulsion and reducing aerodynamic drag Offers insight into the derivation of design sensitivity information Emphasizes design based on first principles Considers pros and cons of innovative configurations Reconsiders optimum cruise performance at transonic Mach numbers Advanced Aircraft Design: Conceptual Design, Analysis and Optimization of Subsonic Civil Airplanes advances understanding of the initial optimization of civil airplanes and is a must-have reference for aerospace engineering students, applied researchers, aircraft design engineers and analysts.

Download or read book Synthesis of Subsonic Airplane Design written by Egbert Torenbeek and published by Springer Science & Business Media. This book was released on 1982-09-30 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the education of aeronautical engineers at Delft University of Technology started in 1940 under tae inspiring leadership of Professor H.J. van der Maas, much emphasis has been placed on the design of aircraft as part of the student's curriculum. Not only is aircraft design an optional subject for thesis work, but every aeronautical student has to carry out a preliminary airplane design in the course of his study. The main purpose of this preliminary design work is to enable the student to synthesize the knowledge ob tained separately in courses on aerodynamics, aircraft performances, stability and con trol, aircraft structures, etc. The student's exercises in preliminary design have been directed through the years by a number of staff members of the Department of Aerospace Engineering in Delft. The author of this book, Mr. E. Torenbeek, has made a large contribution to this part of the study programme for many years. Not only has he acquired vast experience in teaching airplane design at university level, but he has also been deeply involved in design-oriented re search, e.g. developing rational design methods and systematizing design information. I am very pleased that this wealth of experience, methods and data is now presented in this book.

Download or read book Conceptual Aircraft Design written by Ajoy Kumar Kundu and published by John Wiley & Sons. This book was released on 2018-12-14 with total page 1733 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a Comprehensive Introduction to Aircraft Design with an Industrial Approach This book introduces readers to aircraft design, placing great emphasis on industrial practice. It includes worked out design examples for several different classes of aircraft, including Learjet 45, Tucano Turboprop Trainer, BAe Hawk and Airbus A320. It considers performance substantiation and compliance to certification requirements and market specifications of take-off/landing field lengths, initial climb/high speed cruise, turning capability and payload/range. Military requirements are discussed, covering some aspects of combat, as is operating cost estimation methodology, safety considerations, environmental issues, flight deck layout, avionics and more general aircraft systems. The book also includes a chapter on electric aircraft design along with a full range of industry standard aircraft sizing analyses. Split into two parts, Conceptual Aircraft Design: An Industrial Approach spends the first part dealing with the pre-requisite information for configuring aircraft so that readers can make informed decisions when designing vessels. The second part devotes itself to new aircraft concept definition. It also offers additional analyses and design information (e.g., on cost, manufacture, systems, role of CFD, etc.) integral to conceptual design study. The book finishes with an introduction to electric aircraft and futuristic design concepts currently under study. Presents an informative, industrial approach to aircraft design Features design examples for aircraft such as the Learjet 45, Tucano Turboprop Trainer, BAe Hawk, Airbus A320 Includes a full range of industry standard aircraft sizing analyses Looks at several performance substantiation and compliance to certification requirements Discusses the military requirements covering some combat aspects Accompanied by a website hosting supporting material Conceptual Aircraft Design: An Industrial Approach is an excellent resource for those designing and building modern aircraft for commercial, military, and private use.

Download or read book Conceptual Design Synthesis and Optimization for New Generations of Combat Aircraft written by Frank Siegers and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Aircraft Design written by Egbert Torenbeek and published by John Wiley & Sons. This book was released on 2013-07-29 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the overall appearance of modern airliners has not changed a lot since the introduction of jetliners in the 1950s, their safety, efficiency and environmental friendliness have improved considerably. Main contributors to this have been gas turbine engine technology, advanced materials, computational aerodynamics, advanced structural analysis and on-board systems. Since aircraft design became a highly multidisciplinary activity, the development of multidisciplinary optimization (MDO) has become a popular new discipline. Despite this, the application of MDO during the conceptual design phase is not yet widespread. Advanced Aircraft Design: Conceptual Design, Analysis and Optimization of Subsonic Civil Airplanes presents a quasi-analytical optimization approach based on a concise set of sizing equations. Objectives are aerodynamic efficiency, mission fuel, empty weight and maximum takeoff weight. Independent design variables studied include design cruise altitude, wing area and span and thrust or power loading. Principal features of integrated concepts such as the blended wing and body and highly non-planar wings are also covered. The quasi-analytical approach enables designers to compare the results of high-fidelity MDO optimization with lower-fidelity methods which need far less computational effort. Another advantage to this approach is that it can provide answers to “what if” questions rapidly and with little computational cost. Key features: Presents a new fundamental vision on conceptual airplane design optimization Provides an overview of advanced technologies for propulsion and reducing aerodynamic drag Offers insight into the derivation of design sensitivity information Emphasizes design based on first principles Considers pros and cons of innovative configurations Reconsiders optimum cruise performance at transonic Mach numbers Advanced Aircraft Design: Conceptual Design, Analysis and Optimization of Subsonic Civil Airplanes advances understanding of the initial optimization of civil airplanes and is a must-have reference for aerospace engineering students, applied researchers, aircraft design engineers and analysts.

Download or read book Introduction to Aeronautics written by Steven A. Brandt and published by AIAA. This book was released on 2004 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to aircraft design synthesis and analysis written by R. Shevell and published by . This book was released on 1992 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Knowledge Based Integrated Aircraft Design written by Raghu Chaitanya Munjulury and published by Linköping University Electronic Press. This book was released on 2017-05-23 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design and development of new aircraft are becoming increasingly expensive and timeconsuming. To assist the design process in reducing the development cost, time, and late design changes, the conceptual design needs enhancement using new tools and methods. Integration of several disciplines in the conceptual design as one entity enables to keep the design process intact at every step and obtain a high understanding of the aircraft concepts at early stages. This thesis presents a Knowledge-Based Engineering (KBE) approach and integration of several disciplines in a holistic approach for use in aircraft conceptual design. KBE allows the reuse of obtained aircrafts’ data, information, and knowledge to gain more awareness and a better understanding of the concept under consideration at early stages of design. For this purpose, Knowledge-Based (KB) methodologies are investigated for enhanced geometrical representation and enable variable fidelity tools and Multidisciplinary Design Optimization (MDO). The geometry parameterization techniques are qualitative approaches that produce quantitative results in terms of both robustness and flexibility of the design parameterization. The information/parameters from all tools/disciplines and the design intent of the generated concepts are saved and shared via a central database. The integrated framework facilitates multi-fidelity analysis, combining low-fidelity models with high-fidelity models for a quick estimation, enabling a rapid analysis and enhancing the time for a MDO process. The geometry is further propagated to other disciplines [Computational Fluid Dynamics (CFD), Finite Element Analysis (FEA)] for analysis. This is possible with an automated streamlined process (for CFD, FEM, system simulation) to analyze and increase knowledge early in the design process. Several processes were studied to streamline the geometry for CFD. Two working practices, one for parametric geometry and another for KB geometry are presented for automatic mesh generation. It is observed that analytical methods provide quicker weight estimation of the design and when coupled with KBE provide a better understanding. Integration of 1-D and 3-D models offers the best of both models: faster simulation, and superior geometrical representation. To validate both the framework and concepts generated from the tools, they are implemented in academia in several courses at Linköping University and in industry

Download or read book Introduction to Aircraft Design written by John P. Fielding and published by Cambridge University Press. This book was released on 1999-10-14 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Giving a largely descriptive overview of all aspects of the design process, this well-illustrated account provides an insight into the requirements of each specialist in an aircraft design team. After discussing the need for new designs, the text assesses the merits of different aircraft shapes from micro-lights and helicopters to super-jumbos and V/STOL aircraft."--Back cover.

Download or read book Numerical Synthesis Methodology for Conceptual Design of New Generations of Combat Aircraft written by Frank Siegers and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rapid Assessment of Agility for Conceptual Design Synthesis written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-08-20 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: This project consists of designing and implementing a real-time graphical interface for a workstation-based flight simulator. It is capable of creating a three-dimensional out-the-window scene of the aircraft's flying environment, with extensive information about the aircraft's state displayed in the form of a heads-up-display (HUD) overlay. The code, written in the C programming language, makes calls to Silicon Graphics' Graphics Library (GL) to draw the graphics primitives. Included in this report is a detailed description of the capabilities of the code, including graphical examples, as well as a printout of the code itself Biezad, Daniel J. Ames Research Center NCC2-800...

Download or read book Analysis and Synthesis of Aircraft Configurations During Conceptual Design Using an Advanced Morphological Approach written by A. Bardenhagen and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Synthesis of subsonic airplane design written by Egbert Torenbeek and published by Springer. This book was released on 2011-10-08 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the education of aeronautical engineers at Delft University of Technology started in 1940 under the inspiring leadership of Professor H.J. van der Maas, much emphasis has been placed on the design of aircraft as part of the student's curriculum. Not only is aircraft design an optional subject for thesis work, but every aeronautical student has to carry out a preliminary airplane design in the course of his study. The main purpose of this preliminary design work is to enable the student to synthesize the knowledge ob tained separately in courses on aerodynamics, aircraft performances, stability and con trol, aircraft structures, etc. The student's exercises in preliminary design have been directed through the years by a number of staff members of the Department of Aerospace Engineering in Delft. The author of this book, Mr. E. Torenbeek, has made a large contribution to this part of the study programme for many years. Not only has he acquired vast experience in teaching airplane design at university level, but he has also been deeply involved in design-oriented re search, e.g. developing rational design methods and systematizing design information. I am very pleased that this wealth of experience, methods and data is now presented in this book.

Download or read book Aircraft Design written by Daniel P. Raymer and published by AIAA (American Institute of Aeronautics & Astronautics). This book was released on 2006 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Winner of the Summerfield Book Award Winner of the Aviation-Space Writers Association Award of Excellence. --Over 30,000 copies sold, consistently the top-selling AIAA textbook title This highly regarded textbook presents the entire process of aircraft conceptual designfrom requirements definition to initial sizing, configuration layout, analysis, sizing, and trade studiesin the same manner seen in industry aircraft design groups. Interesting and easy to read, the book has more than 800 pages of design methods, illustrations, tips, explanations, and equations, and extensive appendices with key data essential to design. It is the required design text at numerous universities around the world, and is a favorite of practicing design engineers.

Download or read book Aircraft Design written by Daniel P. Raymer and published by . This book was released on 1989 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook for advanced students focuses on industry design practice rather than theoretical definitions. Covers configuration layout, payload considerations, aerodynamics, propulsion, structure and loads, weights, stability, and control, performance, and cost analysis. Annotation copyright Book