Download or read book Airborne Electronic Hardware Design Assurance written by Randall Fulton and published by CRC Press. This book was released on 2017-08-01 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a Federal Aviation Administration (FAA) consultant designated engineering representative (DER) and an electronics hardware design engineer who together taught the DO-254 class at the Radio Technical Commission for Aeronautics, Inc. (RTCA) in Washington, District of Columbia, USA, Airborne Electronic Hardware Design Assurance: A Practitioner's Guide to RTCA/DO-254 is a testimony to the lessons learned and wisdom gained from many years of first-hand experience in the design, verification, and approval of airborne electronic hardware. This practical guide to the use of RTCA/DO-254 in the development of airborne electronic hardware for safety critical airborne applications: Describes how to optimize engineering processes and practices to harmonize with DO-254 Addresses the single most problematic aspect of engineering and compliance to DO-254—poorly written requirements Includes a tutorial on how to write requirements that will minimize the cost and effort of electronic design and verification Discusses the common pitfalls encountered by practitioners of DO-254, along with how those pitfalls occur and what can be done about them Settles the ongoing debate and misconceptions about the true definition of a derived requirement Promotes embracing DO-254 as the best means to achieve compliance to it, as well as the best path to high-quality electronic hardware Airborne Electronic Hardware Design Assurance: A Practitioner's Guide to RTCA/DO-254 offers real-world insight into RTCA/DO-254 and how its objectives can be satisfied. It provides engineers with valuable information that can be applied to any project to make compliance to DO-254 as easy and problem-free as possible.

Download or read book Developing Safety Critical Software written by Leanna Rierson and published by CRC Press. This book was released on 2017-12-19 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: The amount of software used in safety-critical systems is increasing at a rapid rate. At the same time, software technology is changing, projects are pressed to develop software faster and more cheaply, and the software is being used in more critical ways. Developing Safety-Critical Software: A Practical Guide for Aviation Software and DO-178C Compliance equips you with the information you need to effectively and efficiently develop safety-critical, life-critical, and mission-critical software for aviation. The principles also apply to software for automotive, medical, nuclear, and other safety-critical domains. An international authority on safety-critical software, the author helped write DO-178C and the U.S. Federal Aviation Administration’s policy and guidance on safety-critical software. In this book, she draws on more than 20 years of experience as a certification authority, an avionics manufacturer, an aircraft integrator, and a software developer to present best practices, real-world examples, and concrete recommendations. The book includes: An overview of how software fits into the systems and safety processes Detailed examination of DO-178C and how to effectively apply the guidance Insight into the DO-178C-related documents on tool qualification (DO-330), model-based development (DO-331), object-oriented technology (DO-332), and formal methods (DO-333) Practical tips for the successful development of safety-critical software and certification Insightful coverage of some of the more challenging topics in safety-critical software development and verification, including real-time operating systems, partitioning, configuration data, software reuse, previously developed software, reverse engineering, and outsourcing and offshoring An invaluable reference for systems and software managers, developers, and quality assurance personnel, this book provides a wealth of information to help you develop, manage, and approve safety-critical software more confidently.

Download or read book THE AVIATION DEVELOPMENT ECOSYSTEM written by Vance Hilderman and published by . This book was released on 2021-03-20 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until this book, aviation developers were frantically forced to search thousand of aviation standards for relevant information on aircraft, systems, software, and hardware development. Similar to designing a skyscraper by searching through a hardware store for parts, the results were chaotic and disconnected at best. But Today, aviation systems are increasingly integrated, complex, and inter-related; indeed, a new Ecosystem approach is required to succeed in aviation development. In his latest book Aviation Development Ecosystem, one of the world's foremost authorities on aviation development and certification clearly describes and explains in detail the true "Ecosystem" of aviation Safety, Systems, Hardware, and Software and "How To" apply the related standards and guidelines TOGETHER, including the following for aircraft, ground systems, eVTOL, rotorcraft, civil aviation, and military aircraft: DO-178C for Airborne Software: ARP4754A for Aircraft & Systems Development ARP4761 for Safety & Assessments DO-254 for Airborne Hardware DO-278A for Ground & Satellite Based Systems TSO's, TC/STC's, & PMA's DO-330 for Software Tool Qualification DO-331 for Model-Based Development DO-332 for Object Oriented Technology DO-160 for Environmental Testing DO-200B for Aeronautical Data DO-326A for Cyber-Security Multi-Core Processing Requirements, Design and Logic/Code Implementation Validation & Verification Traceability & Transition Criteria Aviation Plans, Standards, & Checklists Quality Assurance & Certification Mitigating Common Mistakes Reducing Engineering / Certification Costs & Risks Best Practices and How-To-Succeed in Aviation Development & Certification The author, Mr. Vance Hilderman, was the principal founder/CTO of three of the world's most significant aviation development/certification companies including TekSci, HighRely, and AFuzion. Hilderman has trained over 25,500 engineers in 700 aviation companies and 30 countries the above topics. His intellectual property is in use by 70% of the world's top 300 aviation and systems developers worldwide, and he has employed and personally presided over 500 of the world's foremost aviation engineers on 300+ projects the past thirty-five years. This book is the Capstone of his career and he readily provides the practical knowledge gained via tens of thousands of hours personally designing and certifying the aviation systems relied upon today for civil aircraft, military aircraft, UAV's, eVTOL, satellites, ground systems, and UAS's.

Download or read book Digital Avionics Handbook written by Cary Spitzer and published by CRC Press. This book was released on 2017-11-22 with total page 841 pages. Available in PDF, EPUB and Kindle. Book excerpt: A perennial bestseller, the Digital Avionics Handbook offers a comprehensive view of avionics. Complete with case studies of avionics architectures as well as examples of modern systems flying on current military and civil aircraft, this Third Edition includes: Ten brand-new chapters covering new topics and emerging trends Significant restructuring to deliver a more coherent and cohesive story Updates to all existing chapters to reflect the latest software and technologies Featuring discussions of new data bus and display concepts involving retina scanning, speech interaction, and synthetic vision, the Digital Avionics Handbook, Third Edition provides practicing and aspiring electrical, aerospace, avionics, and control systems engineers with a pragmatic look at the present state of the art of avionics.

Download or read book Civil Aircraft Electrical Power System Safety Assessment written by Peng Wang and published by Butterworth-Heinemann. This book was released on 2017-06-12 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Civil Aircraft Electrical Power System Safety Assessment: Issues and Practices provides guidelines and methods for conducting a safety assessment process on civil airborne systems and equipment. As civil aircraft electrical systems become more complicated, electrical wiring failures have become a huge concern in industry and government—especially on aging platforms. There have been several accidents (most recently battery problems on the Boeing 777) with some of these having a relationship to wiring and power generation. Featuring a case study on the continuous safety assessment process of the civil airborne electrical power system, this book addresses problems, issues and troubleshooting techniques such as single event effects (SEE), the failure effects of electrical wiring interconnection systems (EWIS), formal theories and safety analysis methods in civil aircrafts. - Introduces how to conduct assignment of development assurance levels for the electrical power system - Includes safety assessments of aging platforms and their respective Electrical Wiring Interconnection System (EWIS) - Features material on failure mechanisms for wiring systems and discussion of Failure Modes and Effects Analysis (FMEA) sustainment

Download or read book Avionics Certification written by Vance Hilderman and published by Avionics Communications. This book was released on 2007 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Learning and Relearning Equipment Complexity written by Sasho Andonov and published by CRC Press. This book was released on 2023-07-07 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: With industrial systems becoming ever more mechanized and reliant on advanced technology, the complexity of equipment, especially in risky industries, is increasing on a daily basis. A thorough understanding of operations and providing safety for these complex systems has become a firm requirement for many. This book offers the knowledge required by safety professionals to provide and maintain the safety of engineering complex systems. Through a scientific and engineering approach to designing, implementing, operating, and maintaining complex systems, Learning and Relearning Equipment Complexity: Achieving Safety in Engineering Complex Systems details the need for more engineering and scientific knowledge to understand and maintain their safety. It gives clear explanations of reasons for a system’s complexity, based on control systems and non-linear dynamics. In addition, the book addresses the necessary changes in the approach and the procedures for the safety assessment of engineering complex systems. The reader will develop a thorough understanding of what complex systems are, why they are complex, and how they are utilized. This book will appeal to any safety professional tasked with complex systems. This extends to professionals in risky industries such as aviation, nuclear power, chemicals, railway and transport, and pharmaceuticals.

Download or read book Digital Avionics Handbook Third Edition written by Cary Spitzer and published by CRC Press. This book was released on 2014-09-03 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: A perennial bestseller, the Digital Avionics Handbook offers a comprehensive view of avionics. Complete with case studies of avionics architectures as well as examples of modern systems flying on current military and civil aircraft, this Third Edition includes: Ten brand-new chapters covering new topics and emerging trends Significant restructuring to deliver a more coherent and cohesive story Updates to all existing chapters to reflect the latest software and technologies Featuring discussions of new data bus and display concepts involving retina scanning, speech interaction, and synthetic vision, the Digital Avionics Handbook, Third Edition provides practicing and aspiring electrical, aerospace, avionics, and control systems engineers with a pragmatic look at the present state of the art of avionics.

Download or read book The World of Civil Aerospace written by Ian Jennions and published by SAE International. This book was released on 2019-05-28 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collaboratively written by eleven experts with extensive experience in the field of commercial aviation, The World of Civil Aerospace is a unique book that defines its own category. Covering the beginnings of commercial aviation, aircraft design and certification, manufacturing and testing, airline operation, maintenance and safety, among other topics, The World of Civil Aerospace shows the reader the fundamental (yet almost invisible) aspects of how the planes and airports we use every day actually function. The title, edited by Prof. Ian Jennions, from Cranfield University in the UK, came about from the desire to share the inner workings of what it takes to create, test, approve, certify and launch a new aircraft. Not mention how to maintain it and make the user experience of flying it positive. With the commercial aviation industry expected to continue to grow for decades to come, the challenges of keeping aircraft in the air safely, reliably and economically are enormous. Thousands of engineers, support personnel, maintainers and crews go to work every day with one goal in mind: to make sure air travel happens as it should. And this is no trivial task. The World of Civil Aerospace brings to light the incredible global network of coordinated tasks and skills needed to make it happen.

Download or read book Digital Avionics Handbook written by Cary Spitzer and published by CRC Press. This book was released on 2017-11-22 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: A perennial bestseller, the Digital Avionics Handbook offers a comprehensive view of avionics. Complete with case studies of avionics architectures as well as examples of modern systems flying on current military and civil aircraft, this Third Edition includes: Ten brand-new chapters covering new topics and emerging trends Significant restructuring to deliver a more coherent and cohesive story Updates to all existing chapters to reflect the latest software and technologies Featuring discussions of new data bus and display concepts involving retina scanning, speech interaction, and synthetic vision, the Digital Avionics Handbook, Third Edition provides practicing and aspiring electrical, aerospace, avionics, and control systems engineers with a pragmatic look at the present state of the art of avionics.

Download or read book Avionics written by Cary R. Spitzer and published by CRC Press. This book was released on 2018-10-03 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: Renamed to reflect the increased role of digital electronics in modern flight control systems, Cary Spitzer's industry-standard Digital Avionics Handbook, Second Edition is available in two comprehensive volumes designed to provide focused coverage for specialists working in different areas of avionics development. The second installment, Avionics: Development and Implementation explores the practical side of avionics. The book examines such topics as modeling and simulation, electronic hardware reliability, certification, fault tolerance, and several examples of real-world applications. New chapters discuss RTCA DO-297/EUROCAE ED-124 integrated modular avionics development and the Genesis platform.

Download or read book Aerospace Sensors written by Alexander Nebylov and published by Momentum Press. This book was released on 2012-11-20 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern air and space craft demand a huge variety of sensing elements for detecting and controlling their behavior and operation. These sensors often differ significantly from those designed for applications in automobile, ship, railway, and other forms of transportation, and those used in industrial, chemical, medical, and other areas. This book offers insight into an appropriate selection of these sensors and describes their principles of operation, design, and achievable performance along with particulars of their construction. Drawn from the activities of the International Federation of Automatic Control (IFAC), especially its Aerospace Technical Committee, the book provides details on the majority of sensors for aircraft and many for spacecraft, satellites, and space probes. It is written by an international team of twelve authors representing four countries from Eastern and Western Europe and North America, all with considerable experience in aerospace sensor and systems design. Highlights include: • coverage of aerospace vehicle classification, specific design criteria, and the requirements of onboard systems and sensors; • reviews of airborne flight parameter sensors, weather sensors and collision avoidance devices; • discussions on the important role of inertial navigation systems (INS) and separate gyroscopic sensors for aerospace vehicle navigation and motion control; • descriptions of engine parameter information collection systems, including fuel quantity and consumption sensors, pressure pick-ups, tachometers, vibration control, and temperature sensors; and • descriptions and examples of sensor integration.

Download or read book Aviation Security Engineering written by Rainer Kölle and published by Artech House. This book was released on 2011 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling a critical gap in aviation engineering literature, this unique and timely resource provides you with a thorough introduction to aviation system security. It enables you to understand the challenges the industry faces and how they are being addressed. You get a complete analysis of the current aviation security standards ARINC 811, ED-127 and the draft SC-216. The book offers you an appreciation for the diverse collection of members within the aviation industry. Moreover, you find a detailed treatment of methods used to design security controls that not only meet individual corporate interests of a stakeholder, but also work towards the holistic securing of the entire industry. This forward-looking volume introduces exiting new areas of aviation security research and techniques for solving today's the most challenging problems, such as security attack identification and response.

Download or read book Developing Safety Critical Software written by Leanna Rierson and published by CRC Press. This book was released on 2017-12-19 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: The amount of software used in safety-critical systems is increasing at a rapid rate. At the same time, software technology is changing, projects are pressed to develop software faster and more cheaply, and the software is being used in more critical ways. Developing Safety-Critical Software: A Practical Guide for Aviation Software and DO-178C Compliance equips you with the information you need to effectively and efficiently develop safety-critical, life-critical, and mission-critical software for aviation. The principles also apply to software for automotive, medical, nuclear, and other safety-critical domains. An international authority on safety-critical software, the author helped write DO-178C and the U.S. Federal Aviation Administration’s policy and guidance on safety-critical software. In this book, she draws on more than 20 years of experience as a certification authority, an avionics manufacturer, an aircraft integrator, and a software developer to present best practices, real-world examples, and concrete recommendations. The book includes: An overview of how software fits into the systems and safety processes Detailed examination of DO-178C and how to effectively apply the guidance Insight into the DO-178C-related documents on tool qualification (DO-330), model-based development (DO-331), object-oriented technology (DO-332), and formal methods (DO-333) Practical tips for the successful development of safety-critical software and certification Insightful coverage of some of the more challenging topics in safety-critical software development and verification, including real-time operating systems, partitioning, configuration data, software reuse, previously developed software, reverse engineering, and outsourcing and offshoring An invaluable reference for systems and software managers, developers, and quality assurance personnel, this book provides a wealth of information to help you develop, manage, and approve safety-critical software more confidently.

Download or read book Aircraft System Safety written by Duane Kritzinger and published by Woodhead Publishing. This book was released on 2016-09-12 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aircraft System Safety: Assessments for Initial Airworthiness Certification presents a practical guide for the novice safety practitioner in the more specific area of assessing aircraft system failures to show compliance to regulations such as FAR25.1302 and 1309. A case study and safety strategy beginning in chapter two shows the reader how to bring safety assessment together in a logical and efficient manner. Written to supplement (not replace) the content of the advisory material to these regulations (e.g. AMC25.1309) as well as the main supporting reference standards (e.g. SAE ARP 4761, RTCA/DO-178, RTCA/DO-154), this book strives to amalgamate all these different documents into a consolidated strategy with simple process maps to aid in their understanding and optimise their efficient use. - Covers the effect of design, manufacturing, and maintenance errors and the effects of common component errors - Evaluates the malfunctioning of multiple aircraft components and the interaction which various aircraft systems have on the ability of the aircraft to continue safe flight and landing - Presents and defines a case study (an aircraft modification program) and a safety strategy in the second chapter, after which each of the following chapters will explore the theory of the technique required and then apply the theory to the case study

Download or read book FPGAs and Parallel Architectures for Aerospace Applications written by Fernanda Kastensmidt and published by Springer. This book was released on 2015-12-07 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the concepts of soft errors in FPGAs, as well as the motivation for using commercial, off-the-shelf (COTS) FPGAs in mission-critical and remote applications, such as aerospace. The authors describe the effects of radiation in FPGAs, present a large set of soft-error mitigation techniques that can be applied in these circuits, as well as methods for qualifying these circuits under radiation. Coverage includes radiation effects in FPGAs, fault-tolerant techniques for FPGAs, use of COTS FPGAs in aerospace applications, experimental data of FPGAs under radiation, FPGA embedded processors under radiation and fault injection in FPGAs. Since dedicated parallel processing architectures such as GPUs have become more desirable in aerospace applications due to high computational power, GPU analysis under radiation is also discussed.

Download or read book Aircraft Systems written by Ian Moir and published by John Wiley & Sons. This book was released on 2011-08-26 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition of Aircraft Systems represents a timely update of the Aerospace Series’ successful and widely acclaimed flagship title. Moir and Seabridge present an in-depth study of the general systems of an aircraft – electronics, hydraulics, pneumatics, emergency systems and flight control to name but a few - that transform an aircraft shell into a living, functioning and communicating flying machine. Advances in systems technology continue to alloy systems and avionics, with aircraft support and flight systems increasingly controlled and monitored by electronics; the authors handle the complexities of these overlaps and interactions in a straightforward and accessible manner that also enhances synergy with the book’s two sister volumes, Civil Avionics Systems and Military Avionics Systems. Aircraft Systems, 3rd Edition is thoroughly revised and expanded from the last edition in 2001, reflecting the significant technological and procedural changes that have occurred in the interim – new aircraft types, increased electronic implementation, developing markets, increased environmental pressures and the emergence of UAVs. Every chapter is updated, and the latest technologies depicted. It offers an essential reference tool for aerospace industry researchers and practitioners such as aircraft designers, fuel specialists, engine specialists, and ground crew maintenance providers, as well as a textbook for senior undergraduate and postgraduate students in systems engineering, aerospace and engineering avionics.