Download or read book Air Side Heat Transfer Enhancement for an Engine Cooling System written by Ronald L. Malone and published by . This book was released on 1990 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thermal Management in Automotive Applications written by T Yomi Obidi and published by SAE International. This book was released on 2015-03-30 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: With new and more stringent standards addressing emission reduction and fuel economy, the importance of a well-developed engine thermal management system becomes even greater. With about 30% of the fuel intake energy dissipated through the cooling system and another 30% through the exhaust system, it is to be expected that serious research has been dedicated to this field. Thermal Management in Automotive Applications, edited by Dr. T. Yomi Obidi, brings together a focused collection of SAE technical papers on the subject. It offers insights into how thermal management impacts the efficiency of engines in heavy vehicles, the effects of better coolant flow control, and the use of smart thermostat and next-generation cooling pumps. It also provides an in-depth analysis of the possible gains in optimum warm-up sequence and thermal management on a small gasoline engine. With continuously increasing gadgetry in modern vehicles, the average temperature in the engine compartment has seen significant increase. It is important to be able to divert the heat away from passengers as well as from some components that may be negatively impacted by excessive temperatures. Thermal Management in Automotive Applications points out solutions to this challenge, including material and design options.

Download or read book Laminar Flow Forced Convection in Ducts written by R. K. Shah and published by Academic Press. This book was released on 2014-06-28 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laminar Flow Forced Convection in Ducts is a sourcebook for compact heat exchanger analytical data. This book describes the analytical solutions for laminar fluid flow and forced convection heat transfer in circular and noncircular pipes, including applicable differential equations and boundary conditions involving velocity and temperature problems of fluid flow. The book also discusses fluid flow—how much power is required to pump fluids through the heat exchanger, as well as the heat transfer—the determination of q" distribution, and the temperature of fluid and walls. The text also analyzes the coolant or heat transfer fluid flows in a nuclear power reactor composed of a bundle of circular section fuel rods located inside a round tube. R.A. Axford addresses fluid flow and heat transfers results for the rod bundle geometry in "Heat Transfer in Rod Bundles." The book also provides an overview and guidelines that can be used for the designer and the applied mathematician. This book is suitable for engineers working in electronics, aerospace, instrumentation, and biomechanics that use cooling or heating exchanges or solar collection systems.

Download or read book Heat Transfer in Gas Turbines written by Bengt Sundén and published by Witpress. This book was released on 2001 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title presents and reflects current active research on various heat transfer topics and related phenomena in gas turbine systems. It begins with a general introduction to gas turbine heat transfer, before moving on to specific areas.

Download or read book Compact Heat Exchangers written by Alexander Louis London and published by CRC Press. This book was released on 1990 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat exchangers are a crucial part of aerospace, marine, cryogenic and refrigeration technology. These essays cover such topics as complicated flow arrangements, complex extended surfaces, two-phase flow and irreversibility in heat exchangers, and single-phase heat transfer.

Download or read book Gas Turbine Heat Transfer and Cooling Technology Second Edition written by Je-Chin Han and published by CRC Press. This book was released on 2012-11-27 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference for engineers and researchers, Gas Turbine Heat Transfer and Cooling Technology, Second Edition has been completely revised and updated to reflect advances in the field made during the past ten years. The second edition retains the format that made the first edition so popular and adds new information mainly based on selected published papers in the open literature. See What’s New in the Second Edition: State-of-the-art cooling technologies such as advanced turbine blade film cooling and internal cooling Modern experimental methods for gas turbine heat transfer and cooling research Advanced computational models for gas turbine heat transfer and cooling performance predictions Suggestions for future research in this critical technology The book discusses the need for turbine cooling, gas turbine heat-transfer problems, and cooling methodology and covers turbine rotor and stator heat-transfer issues, including endwall and blade tip regions under engine conditions, as well as under simulated engine conditions. It then examines turbine rotor and stator blade film cooling and discusses the unsteady high free-stream turbulence effect on simulated cascade airfoils. From here, the book explores impingement cooling, rib-turbulent cooling, pin-fin cooling, and compound and new cooling techniques. It also highlights the effect of rotation on rotor coolant passage heat transfer. Coverage of experimental methods includes heat-transfer and mass-transfer techniques, liquid crystal thermography, optical techniques, as well as flow and thermal measurement techniques. The book concludes with discussions of governing equations and turbulence models and their applications for predicting turbine blade heat transfer and film cooling, and turbine blade internal cooling.

Download or read book Process Heat Transfer written by Robert W. Serth and published by Academic Press. This book was released on 2014-01-27 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Heat Transfer is a reference on the design and implementation of industrial heat exchangers. It provides the background needed to understand and master the commercial software packages used by professional engineers in the design and analysis of heat exchangers. This book focuses on types of heat exchangers most widely used by industry: shell-and-tube exchangers (including condensers, reboilers and vaporizers), air-cooled heat exchangers and double-pipe (hairpin) exchangers. It provides a substantial introduction to the design of heat exchanger networks using pinch technology, the most efficient strategy used to achieve optimal recovery of heat in industrial processes. - Utilizes leading commercial software. Get expert HTRI Xchanger Suite guidance, tips and tricks previously available via high cost professional training sessions. - Details the development of initial configuration for a heat exchanger and how to systematically modify it to obtain an efficient final design. - Abundant case studies and rules of thumb, along with copious software examples, provide a complete library of reference designs and heuristics for readers to base their own designs on.

Download or read book Compact Heat Exchangers written by J.E. Hesselgreaves and published by Elsevier. This book was released on 2001-05-08 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the ideas and industrial concepts in compact heat exchanger technology that have been developed in the last 10 years or so. Historically, the development and application of compact heat exchangers and their surfaces has taken place in a piecemeal fashion in a number of rather unrelated areas, principally those of the automotive and prime mover, aerospace, cryogenic and refrigeration sectors. Much detailed technology, familiar in one sector, progressed only slowly over the boundary into another sector. This compartmentalisation was a feature both of the user industries themselves, and also of the supplier, or manufacturing industries. These barriers are now breaking down, with valuable cross-fertilisation taking place. One of the industrial sectors that is waking up to the challenges of compact heat exchangers is that broadly defined as the process sector. If there is a bias in the book, it is towards this sector. Here, in many cases, the technical challenges are severe, since high pressures and temperatures are often involved, and working fluids can be corrosive, reactive or toxic. The opportunities, however, are correspondingly high, since compacts can offer a combination of lower capital or installed cost, lower temperature differences (and hence running costs), and lower inventory. In some cases they give the opportunity for a radical re-think of the process design, by the introduction of process intensification (PI) concepts such as combining process elements in one unit. An example of this is reaction and heat exchange, which offers, among other advantages, significantly lower by-product production.To stimulate future research, the author includes coverage of hitherto neglected approaches, such as that of the Second Law (of Thermodynamics), pioneered by Bejan and co- workers. The justification for this is that there is increasing interest in life-cycle and sustainable approaches to industrial activity as a whole, often involving exergy (Second Law) analysis. Heat exchangers, being fundamental components of energy and process systems, are both savers and spenders of exergy, according to interpretation.

Download or read book Heat Transfer Enhancement with Nanofluids written by Vincenzo Bianco and published by CRC Press. This book was released on 2015-04-01 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofluids are gaining the attention of scientists and researchers around the world. This new category of heat transfer medium improves the thermal conductivity of fluid by suspending small solid particles within it and offers the possibility of increased heat transfer in a variety of applications. Bringing together expert contributions from

Download or read book Compact Heat Exchangers written by C. Ranganayakulu and published by John Wiley & Sons. This book was released on 2018-04-30 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive source of generalized design data for most widely used fin surfaces in CHEs Compact Heat Exchanger Analysis, Design and Optimization: FEM and CFD Approach brings new concepts of design data generation numerically (which is more cost effective than generic design data) and can be used by design and practicing engineers more effectively. The numerical methods/techniques are introduced for estimation of performance deteriorations like flow non-uniformity, temperature non-uniformity, and longitudinal heat conduction effects using FEM in CHE unit level and Colburn j factors and Fanning friction f factors data generation method for various types of CHE fins using CFD. In addition, worked examples for single and two-phase flow CHEs are provided and the complete qualification tests are given for CHEs use in aerospace applications. Chapters cover: Basic Heat Transfer; Compact Heat Exchangers; Fundamentals of Finite Element and Finite Volume Methods; Finite Element Analysis of Compact Heat Exchangers; Generation of Design Data by CFD Analysis; Thermal and Mechanical Design of Compact Heat Exchanger; and Manufacturing and Qualification Testing of Compact Heat Exchanger. Provides complete information about basic design of Compact Heat Exchangers Design and data generation is based on numerical techniques such as FEM and CFD methods rather than experimental or analytical ones Intricate design aspects included, covering complete cycle of design, manufacturing, and qualification of a Compact Heat Exchanger Appendices on basic essential fluid properties, metal characteristics, and derivation of Fourier series mathematical equation Compact Heat Exchanger Analysis, Design and Optimization: FEM and CFD Approach is ideal for senior undergraduate and graduate students studying equipment design and heat exchanger design.

Download or read book Modern Engineering for Design of Liquid Propellant Rocket Engines written by Dieter K. Huzel and published by AIAA. This book was released on 1992 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Gas Turbine Blade Cooling written by Chaitanya D Ghodke and published by SAE International. This book was released on 2018-12-10 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas turbines play an extremely important role in fulfilling a variety of power needs and are mainly used for power generation and propulsion applications. The performance and efficiency of gas turbine engines are to a large extent dependent on turbine rotor inlet temperatures: typically, the hotter the better. In gas turbines, the combustion temperature and the fuel efficiency are limited by the heat transfer properties of the turbine blades. However, in pushing the limits of hot gas temperatures while preventing the melting of blade components in high-pressure turbines, the use of effective cooling technologies is critical. Increasing the turbine inlet temperature also increases heat transferred to the turbine blade, and it is possible that the operating temperature could reach far above permissible metal temperature. In such cases, insufficient cooling of turbine blades results in excessive thermal stress on the blades causing premature blade failure. This may bring hazards to the engine's safe operation. Gas Turbine Blade Cooling, edited by Dr. Chaitanya D. Ghodke, offers 10 handpicked SAE International's technical papers, which identify key aspects of turbine blade cooling and help readers understand how this process can improve the performance of turbine hardware.

Download or read book Process Intensification written by David Reay and published by Butterworth-Heinemann. This book was released on 2013-06-05 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Intensification: Engineering for Efficiency, Sustainability and Flexibility is the first book to provide a practical working guide to understanding process intensification (PI) and developing successful PI solutions and applications in chemical process, civil, environmental, energy, pharmaceutical, biological, and biochemical systems. Process intensification is a chemical and process design approach that leads to substantially smaller, cleaner, safer, and more energy efficient process technology. It improves process flexibility, product quality, speed to market and inherent safety, with a reduced environmental footprint. This book represents a valuable resource for engineers working with leading-edge process technologies, and those involved research and development of chemical, process, environmental, pharmaceutical, and bioscience systems. - No other reference covers both the technology and application of PI, addressing fundamentals, industry applications, and including a development and implementation guide - Covers hot and high growth topics, including emission prevention, sustainable design, and pinch analysis - World-class authors: Colin Ramshaw pioneered PI at ICI and is widely credited as the father of the technology

Download or read book Thermochemical Energy Storage written by Gunnar Wettermark and published by Swedish. This book was released on 1980 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design and Operation of Heat Exchangers and their Networks written by Wilfried Roetzel and published by Academic Press. This book was released on 2019-10-04 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Operation of heat Exchangers and Their Networks presents a comprehensive and detailed analysis on the thermal design methods for the most common types of heat exchangers, with a focus on their networks, simulation procedures for their operations, and measurement of their thermal performances. The book addresses the fundamental theories and principles of heat transfer performance of heat exchangers and their applications and then applies them to the use of modern computing technology. Topics discussed include cell methods for condensers and evaporators, dispersion models for heat exchangers, experimental methods for the evaluation of heat exchanger performance, and thermal calculation algorithms for multi-stream heat exchangers and heat exchanger networks. - Includes MATLAB codes to illustrate how the technologies and methods discussed can be easily applied and developed - Analyses a range of different models, applications, and case studies in order to reveal more advanced solutions for industrial applications - Maintains a strong focus on the fundamental theories and principles of the heat transfer performance of heat exchangers and their applications for complex flow arrangement

Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applications of Nanofluid for Heat Transfer Enhancement written by Mohsen Sheikholeslami and published by William Andrew. This book was released on 2017-02-26 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applications of Nanofluid for Heat Transfer Enhancement explores recent progress in computational fluid dynamic and nonlinear science and its applications to nanofluid flow and heat transfer. The opening chapters explain governing equations and then move on to discussions of free and forced convection heat transfers of nanofluids. Next, the effect of nanofluid in the presence of an electric field, magnetic field, and thermal radiation are investigated, with final sections devoted to nanofluid flow in porous media and application of nanofluid for solidification. The models discussed in the book have applications in various fields, including mathematics, physics, information science, biology, medicine, engineering, nanotechnology, and materials science. - Presents the latest information on nanofluid free and force convection heat transfer, of nanofluid in the presence of thermal radiation, and nanofluid in the presence of an electric field - Provides an understanding of the fundamentals in new numerical and analytical methods - Includes codes for each modeling method discussed, along with advice on how to best apply them