Download or read book Transport Phenomena with Drops and Bubbles written by Satwindar S. Sadhal and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid flows that transfer heat and mass often involve drops and bubbles, particularly if there are changes of phase in the fluid in the formation or condensation of steam, for example. Such flows pose problems for the chemical and mechanical engineer significantly different from those posed by single-phase flows. This book reviews the current state of the field and will serve as a reference for researchers, engineers, teachers, and students concerned with transport phenomena. It begins with a review of the basics of fluid flow and a discussion of the shapes and sizes of fluid particles and the factors that determine these. The discussion then turns to flows at low Reynolds numbers, including effects due to phase changes or to large radial inertia. Flows at intermediate and high Reynolds numbers are treated from a numerical perspective, with reference to experimental results. The next chapter considers the effects of solid walls on fluid particles, treating both the statics and dynamics of the particle-wall interaction and the effects of phase changes at a solid wall. This is followed by a discussion of the formation and breakup of drops and bubbles, both with and without phase changes. The last two chapters discuss compound drops and bubbles, primarily in three-phase systems, and special topics, such as transport in an electric field.

Download or read book Bubbles Drops and Particles in Non Newtonian Fluids written by Raj P. Chhabra and published by CRC Press. This book was released on 2023-08-31 with total page 733 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides thorough coverage of the scientific foundations and the latest advances in particle motion in non-Newtonian media. Proveds a new detailed section on the effect of confinement on heat transfer from bluff-bodies Demonstrates how dynamic behavior of single particles can yield useful information for modeling transport processes in complex multiphase flows. Addresses heat transfer in viscoplastic fluids throughout the entire book. Highlights qualitative differences between the response of a Newtonian and non-Newtonian fluids in the complex flows encountered in processing applications

Download or read book Bubble Formation and Detachment in Liquid Flow Under Normal and Reduced Gravity written by Henry K. Nahra and published by . This book was released on 1998 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Bubbles Drops and Particles in Non Newtonian Fluids written by R.P. Chhabra and published by CRC Press. This book was released on 2006-07-25 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bubbles, Drops, and Particles in Non-Newtonian Fluids, Second Edition continues to provide thorough coverage of the scientific foundations and the latest advances in particle motion in non-Newtonian media. The book demonstrates how dynamic behavior of single particles can yield useful information for modeling transport processes in complex multipha

Download or read book Drop Surface Interactions written by Martin Rein and published by Springer Science & Business Media. This book was released on 2002-10-30 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive overview of fluid mechanical, thermal and physico-chemical aspects of drop-surface interactions. Basic physical mechanisms pertaining to free-surface flow phenomena characteristic of drop impact on solid and liquid surfaces are explained emphasizing the importance of scaling. Moreover, physico-chemical fundamentals relating to a forced spreading of complex solutions, analytical tools for calculating compressibility effects, and heat transfer and phase change phenomena occurring during solidification and evaporation processes, respectively, are introduced in detail. Finally, numerical approaches particularly suited for modeling drop-surface interactions are consisely surveyed with a particular emphasis on boundary integral methods and Navier-Stokes algorithms (volume of fluid, level set and front tracking algorithms). The book is closed by contributions to a workshop on Drop-Surface Interactions held at the International Centre of Mechanical Sciences.

Download or read book Fluid Mechanics of Mixing written by R. King and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is a selection of the material presented at the 7th European Mixing Congress. It is concerned exclusively with mixing in circular section vessels, using centrally mounted paddles or similar impellers. The contents are arranged under three classifications: Modelling of Mixing Processes, Mixing Operations and Experimental Techniques. The classifications result in the original material appearing in a different order to that of the Congress. This arrangement is intended to assist the reader in identifying the topic area by function or application, rather than by technology. In this book the section on Modelling contains papers which focus on the representation of the mixing process, whether by equation, scale-up criteria, or fluid dynamic simulation. Similarly, Mixing Operations are concerned with the application or function of the mixing process, such as mass transfer, heat transfer or mixing time. Experimental Techniques addresses the tools the researcher needs to use at the data gathering experimental stage. It collects together advances made in the various methods used by some of the foremost researchers, and indicates those areas still in need of additional instrumentation or methods of data reduction. The book is intended for researchers, designers and users of mixing equipment, and for those planning research and development programmes and who wish to keep up to date with advances in the basic technology and its applications.

Download or read book Fundamentals of Cavitation written by Jean-Pierre Franc and published by Springer Science & Business Media. This book was released on 2006-01-22 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book treats cavitation, which is a unique phenomenon in the field of hyd- dynamics, although it can occur in any hydraulic machinery such as pumps, propellers, artificial hearts, and so forth. Cavitation is generated not only in water, but also in any kind of fluid, such as liquid hydrogen. The generation of cavitation can cause severe damage in hydraulic machinery. Therefore, the prevention of cavitation is an important concern for designers of hydraulic machinery. On the contrary, there is great potential to utilize cavitation in various important applications, such as environmental protection. There have been several books published on cavitation, including one by the same authors. This book differs from those previous ones, in that it is both more physical and more theoretical. Any theoretical explanation of the cavitation phenomenon is rather difficult, but the authors have succeeded in explaining it very well, and a reader can follow the equations easily. It is an advantage in reading this book to have some understanding of the physics of cavitation. Therefore, this book is not an introductory text, but a book for more advanced study. However, this does not mean that this book is too difficult for a beginner, because it explains the cavitation phenomenon using many figures. Therefore, even a beginner on cavitation can read and can understand what cavitation is. If the student studies through this book (with patience), he or she can become an expert on the physics of cavitation.

Download or read book Principles of Metal Refining and Recycling written by Thorvald Abel Engh and published by Oxford University Press. This book was released on 2021-10-23 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of Metal Refining and Recycling provides a self-contained introduction to the field of purification and recycling of metals. The scientific principles in the treatment of the various metals are the same. The importance of using a clean and properly alloyed metal is described in detail. The text covers thermodynamics, physical and transport properties, mixing, mass transfer and numerical models. It describes methods for removal of dissolved impurity elements, particles, and inclusions. It considers important aspects of the solidification process, remelting and adding of alloys. Recycling, future challenges and specific processes for each metal are discussed in detail. The book is a greatly extended update of the 1992 book Principles of Metal Refining by T. Abel Engh. It includes in particular the subjects of metal recycling, ferrous and non-ferrous metal refining, and metalloids like silicon.

Download or read book Fundamentals of Multiphase Flow written by Christopher E. Brennen and published by Cambridge University Press. This book was released on 2005-04-18 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description

Download or read book Fluid Mechanics Heat Transfer and Mass Transfer written by K. S. Raju and published by John Wiley & Sons. This book was released on 2011-04-20 with total page 1422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This broad-based book covers the three major areas of Chemical Engineering. Most of the books in the market involve one of the individual areas, namely, Fluid Mechanics, Heat Transfer or Mass Transfer, rather than all the three. This book presents this material in a single source. This avoids the user having to refer to a number of books to obtain information. Most published books covering all the three areas in a single source emphasize theory rather than practical issues. This book is written with emphasis on practice with brief theoretical concepts in the form of questions and answers, not adopting stereo-typed question-answer approach practiced in certain books in the market, bridging the two areas of theory and practice with respect to the core areas of chemical engineering. Most parts of the book are easily understandable by those who are not experts in the field. Fluid Mechanics chapters include basics on non-Newtonian systems which, for instance find importance in polymer and food processing, flow through piping, flow measurement, pumps, mixing technology and fluidization and two phase flow. For example it covers types of pumps and valves, membranes and areas of their use, different equipment commonly used in chemical industry and their merits and drawbacks. Heat Transfer chapters cover the basics involved in conduction, convection and radiation, with emphasis on insulation, heat exchangers, evaporators, condensers, reboilers and fired heaters. Design methods, performance, operational issues and maintenance problems are highlighted. Topics such as heat pipes, heat pumps, heat tracing, steam traps, refrigeration, cooling of electronic devices, NOx control find place in the book. Mass transfer chapters cover basics such as diffusion, theories, analogies, mass transfer coefficients and mass transfer with chemical reaction, equipment such as tray and packed columns, column internals including structural packings, design, operational and installation issues, drums and separators are discussed in good detail. Absorption, distillation, extraction and leaching with applications and design methods, including emerging practices involving Divided Wall and Petluk column arrangements, multicomponent separations, supercritical solvent extraction find place in the book.

Download or read book Multiphase Flows for Process Industries written by Vivek V. Ranade and published by John Wiley & Sons. This book was released on 2022-03-30 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the cutting-edge in multiphase flows used in the process industries In Multiphase Flows for Process Industries: Fundamentals and Applications, a team of accomplished chemical engineers delivers an insightful and complete treatment of the state-of-the-art in commonly encountered multiphase flows in the process industries. After discussing the theoretical background, experimental methods, and computational methods applicable to multiphase flows, the authors explore specific examples from the process industries. The book covers a wide range of multiphase flows, including gas-solid fluidized beds and flows with phase change. It also provides direction on how to use current advances in the field to realize efficient and optimized processes. Filling the gap between theory and practice, this unique reference also includes: A thorough introduction to multiphase flows and the process industry Practical discussions of flow regimes, lower order models and correlations, and the chronological development of mathematical models for multiphase flows Comprehensive explorations of experimental methods for characterizing multiphase flows, including flow imaging and visualization In-depth examinations of computational models for simulating multiphase flows Perfect for chemical and process engineers, Multiphase Flows for Process Industries: Fundamentals and Applications is required reading for graduate and doctoral students in the engineering sciences, as well as professionals in the chemical industry.

Download or read book 9th Australasian Fluid Mechanics Conference written by and published by . This book was released on 1986 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Flow Control Techniques and Applications written by Jinjun Wang and published by Cambridge University Press. This book was released on 2019 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master the theory, applications and control mechanisms of flow control techniques.

Download or read book The Canadian Journal of Chemical Engineering written by and published by . This book was released on 2007-02 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Issues in Chemical Engineering and other Chemistry Specialties 2012 Edition written by and published by ScholarlyEditions. This book was released on 2013-01-10 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Chemical Engineering and other Chemistry Specialties: 2012 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Chemical Engineering. The editors have built Issues in Chemical Engineering and other Chemistry Specialties: 2012 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Chemical Engineering in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Chemical Engineering and other Chemistry Specialties: 2012 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.

Download or read book Dynamics of Multiphase Flows written by Chao Zhu and published by Cambridge University Press. This book was released on 2021-06-17 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understand multiphase flows using multidisciplinary knowledge in physical principles, modelling theories, and engineering practices. This essential text methodically introduces the important concepts, governing mechanisms, and state-of-the-art theories, using numerous real-world applications, examples, and problems. Covers all major types of multiphase flows, including gas-solid, gas-liquid (sprays or bubbling), liquid-solid, and gas-solid-liquid flows. Introduces the volume-time-averaged transport theorems and associated Lagrangian-trajectory modelling and Eulerian-Eulerian multi-fluid modelling. Explains typical computational techniques, measurement methods and four representative subjects of multiphase flow systems. Suitable as a reference for engineering students, researchers, and practitioners, this text explores and applies fundamental theories to the analysis of system performance using a case-based approach.

Download or read book Proceedings of the 61st Conference of Metallurgists COM 2022 written by Metallurgy & Materials Soc. of CIM and published by Springer Nature. This book was released on 2023-01-05 with total page 975 pages. Available in PDF, EPUB and Kindle. Book excerpt: These Proceedings represent the metallurgical engineering and materials science research presented at the 61st Annual Conference of Metallurgists. The collection themed ‘The Pathway to Net-Zero’ presents findings on a wide range of topics including: Processing of Critical Materials Towards Sustainable Circularity: Mining to Materials Deep Decarbonization Pathways for Pyrometallurgical Processes: Opportunities & Challenges Energy and Environmental Materials Light Metals for the Transportation Industry Advances in Materials Manufacturing VI – Existing and Emerging Materials Electrochemical Degradation of Multi-component Materials