Download or read book Atmospheric Flight Mechanics Conference Held August 1997 at New Orleans Louisiana written by American Institute of Aeronautics and Astronautics and published by AIAA (American Institute of Aeronautics & Astronautics). This book was released on 1997 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the proceedings of the Atmospheric Flight Mechanics Conference, which took place in New Orleans, August 1997. It focuses on the technical progress, issues and challenges associated with atmospheric flight. Technical papers address stability and control, flying qualities (including one session dedicated to pilot-induced oscillations), unsteady and vortex aerodynamics, system and parameter identification, aircraft flight dynamic re-entry and aero assist technologies, and reusable launch vehicles.
Download or read book Introduction to Aircraft Flight Mechanics written by Thomas R. Yechout and published by AIAA. This book was released on 2003 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on a 15-year successful approach to teaching aircraft flight mechanics at the US Air Force Academy, this text explains the concepts and derivations of equations for aircraft flight mechanics. It covers aircraft performance, static stability, aircraft dynamics stability and feedback control.
Download or read book Ground and Flight Evaluation of a Small Scale Inflatable Winged Aircraft written by and published by . This book was released on 2002 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: A small-scale, instrumented research aircraft was flown to investigate the flight characteristics of inflatable wings. Ground tests measured the static structural characteristics of the wing at different inflation pressures, and these results compared favorably with analytical predictions. A research-quality instrumentation system was assembled, largely from commercial off-the-shelf components, and installed in the aircraft. Initial flight operations were conducted with a conventional rigid wing having the same dimensions as the inflatable wing. Subsequent flights were conducted with the inflatable wing. Research maneuvers were executed to identify the trim, aerodynamic performance, and longitudinal stability and control characteristics of the vehicle in its different wing configurations. For the angle-of-attack range spanned in this flight program.
Download or read book On Subscale Flight Testing written by Alejandro Sobron and published by Linköping University Electronic Press. This book was released on 2018-11-05 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Downscaled physical models, also referred to as subscale models, have played an essential role in the investigation of the complex physics of flight until the recent disruption of numerical simulation. Despite the fact that improvements in computational methods are slowly pushing experimental techniques towards a secondary role as verification or calibration tools, real-world testing of physical prototypes still provides an unmatched confidence. Physical models are very effective at revealing issues that are sometimes not correctly identified in the virtual domain, and hence can be a valuable complement to other design tools. But traditional wind-tunnel testing cannot always meet all of the requirements of modern aeronautical research and development. It is nowadays too expensive to use these scarce facilities to explore different design iterations during the initial stages of aircraft development, or to experiment with new and immature technologies. Testing of free-flight subscale models, referred to as Subscale Flight Testing (SFT), could offer an affordable and low-risk alternative for complementing conventional techniques with both qualitative and quantitative information. The miniaturisation of mechatronic systems, the advances in rapid-prototyping techniques and power storage, as well as new manufacturing methods, currently enable the development of sophisticated test objects at scales that were impractical some decades ago. Moreover, the recent boom in the commercial drone industry has driven a quick development of specialised electronics and sensors, which offer nowadays surprising capabilities at competitive prices. These recent technological disruptions have significantly altered the cost-benefit function of SFT and it is necessary to re-evaluate its potential in the contemporary aircraft development context. This thesis aims to increase the comprehension and knowledge of the SFT method in order to define a practical framework for its use in aircraft design; focusing on low-cost, short-time solutions that don’t require more than a small organization and few resources. This objective is approached from a theoretical point of view by means of an analysis of the physical and practical limitations of the scaling laws; and from an empirical point of view by means of field experiments aimed at identifying practical needs for equipment, methods, and tools. A low-cost data acquisition system is developed and tested; a novel method for semi-automated flight testing in small airspaces is proposed; a set of tools for analysis and visualisation of flight data is presented; and it is also demonstrated that it is possible to explore and demonstrate new technology using SFT with a very limited amount of economic and human resources. All these, together with a theoretical review and contextualisation, contribute to increasing the comprehension and knowledge of the SFT method in general, and its potential applications in aircraft conceptual design in particular.
Download or read book Scramjet Propulsion written by E. T. Curran and published by AIAA. This book was released on 2001 with total page 1354 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flight Stability and Automatic Control written by Robert C. Nelson and published by . This book was released on 1998 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition of this this flight stability and controls guide features an unintimidating math level, full coverage of terminology, and expanded discussions of classical to modern control theory and autopilot designs. Extensive examples, problems, and historical notes, make this concise book a vital addition to the engineer's library.
Download or read book Flight Dynamics Principles written by Michael V. Cook and published by Butterworth-Heinemann. This book was released on 2012-10-03 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of flight dynamics requires a thorough understanding of the theory of the stability and control of aircraft, an appreciation of flight control systems and a grounding in the theory of automatic control. Flight Dynamics Principles is a student focused text and provides easy access to all three topics in an integrated modern systems context. Written for those coming to the subject for the first time, the book provides a secure foundation from which to move on to more advanced topics such as, non-linear flight dynamics, flight simulation, handling qualities and advanced flight control. - Additional examples to illustrate the application of computational procedures using tools such as MATLAB®, MathCad® and Program CC® - Improved compatibility with, and more expansive coverage of the North American notational style - Expanded coverage of lateral-directional static stability, manoeuvrability, command augmentation and flight in turbulence - An additional coursework study on flight control design for an unmanned air vehicle (UAV)
Download or read book AIAA Atmospheric Flight Mechanics Conference written by American Institute of Aeronautics and Astronautics Staff and published by . This book was released on 1993 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book F 35A Lightning II written by Marty Gitlin and published by Little Mitchie. This book was released on 2023-05-30 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Air Force wanted an upgrade. It wanted a better fighter jet. One that could stay hidden from the enemy. One that could attack and destroy. One that could defend itself. One that could keep pilots safe. Keep U.S. ground troops safe. Keep Americans safe. Keep the world safe. A jet fighter that all friendly nations could use. This book is all about that aircraft. Part of the America's Fighter Jets series: F-35A Lightning II puts readers into the sky with the jet. This fun book gives young readers insight on how the F-35A Lightning II achieved its goals. And why fewer of them might be made in the future.
Download or read book Designing Unmanned Aircraft Systems written by Jay Gundlach and published by AIAA (American Institute of Aeronautics & Astronautics). This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unmanned aircraft systems (UAS) are revolutionizing our approach to flight. Whether monitoring severe weather or conducting a military operation, new versions of these machines and the components that operate them are being developed and implemented at an unprecedented rate as corporations, governments, academia, and private individuals all seek to understand and capitalize upon this innovative, expanding field.
Download or read book Aviation Safety and Pilot Control written by National Research Council and published by National Academies Press. This book was released on 1997-03-28 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adverse aircraft-pilot coupling (APC) events include a broad set of undesirable and sometimes hazardous phenomena that originate in anomalous interactions between pilots and aircraft. As civil and military aircraft technologies advance, interactions between pilots and aircraft are becoming more complex. Recent accidents and other incidents have been attributed to adverse APC in military aircraft. In addition, APC has been implicated in some civilian incidents. This book evaluates the current state of knowledge about adverse APC and processes that may be used to eliminate it from military and commercial aircraft. It was written for technical, government, and administrative decisionmakers and their technical and administrative support staffs; key technical managers in the aircraft manufacturing and operational industries; stability and control engineers; aircraft flight control system designers; research specialists in flight control, flying qualities, human factors; and technically knowledgeable lay readers.
Download or read book Advances in Aerospace Guidance Navigation and Control written by Qiping Chu and published by Springer Science & Business Media. This book was released on 2013-11-18 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the successful 1st CEAS (Council of European Aerospace Societies) Specialist Conference on Guidance, Navigation and Control (CEAS EuroGNC) held in Munich, Germany in 2011, Delft University of Technology happily accepted the invitation of organizing the 2nd CEAS EuroGNC in Delft, The Netherlands in 2013. The goal of the conference is to promote new advances in aerospace GNC theory and technologies for enhancing safety, survivability, efficiency, performance, autonomy and intelligence of aerospace systems using on-board sensing, computing and systems. A great push for new developments in GNC are the ever higher safety and sustainability requirements in aviation. Impressive progress was made in new research fields such as sensor and actuator fault detection and diagnosis, reconfigurable and fault tolerant flight control, online safe flight envelop prediction and protection, online global aerodynamic model identification, online global optimization and flight upset recovery. All of these challenges depend on new online solutions from on-board computing systems. Scientists and engineers in GNC have been developing model based, sensor based as well as knowledge based approaches aiming for highly robust, adaptive, nonlinear, intelligent and autonomous GNC systems. Although the papers presented at the conference and selected in this book could not possibly cover all of the present challenges in the GNC field, many of them have indeed been addressed and a wealth of new ideas, solutions and results were proposed and presented. For the 2nd CEAS Specialist Conference on Guidance, Navigation and Control the International Program Committee conducted a formal review process. Each paper was reviewed in compliance with good journal practice by at least two independent and anonymous reviewers. The papers published in this book were selected from the conference proceedings based on the results and recommendations from the reviewers.
Download or read book Spacecraft Formation Flying written by Kyle Alfriend and published by Elsevier. This book was released on 2009-11-16 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Space agencies are now realizing that much of what has previously been achieved using hugely complex and costly single platform projects—large unmanned and manned satellites (including the present International Space Station)—can be replaced by a number of smaller satellites networked together. The key challenge of this approach, namely ensuring the proper formation flying of multiple craft, is the topic of this second volume in Elsevier's Astrodynamics Series, Spacecraft Formation Flying: Dynamics, control and navigation. In this unique text, authors Alfriend et al. provide a coherent discussion of spacecraft relative motion, both in the unperturbed and perturbed settings, explain the main control approaches for regulating relative satellite dynamics, using both impulsive and continuous maneuvers, and present the main constituents required for relative navigation. The early chapters provide a foundation upon which later discussions are built, making this a complete, standalone offering. Intended for graduate students, professors and academic researchers in the fields of aerospace and mechanical engineering, mathematics, astronomy and astrophysics, Spacecraft Formation Flying is a technical yet accessible, forward-thinking guide to this critical area of astrodynamics. - The first book dedicated to spacecraft formation flying, written by leading researchers and professors in the field - Develops the theory from an astrodynamical viewpoint, emphasizing modeling, control and navigation of formation flying satellites on Earth orbits - Examples used to illustrate the main developments, with a sample simulation of a formation flying mission included to illustrate high fidelity modeling, control and relative navigation
Download or read book Aerodynamics Aeronautics and Flight Mechanics written by Barnes W. McCormick and published by John Wiley & Sons. This book was released on 1994-09-28 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: A New Edition of the Most Effective Text/Reference in the Field! Aerodynamics, Aeronautics, and Flight Mechanics, Second Edition Barnes W. McCormick, Pennsylvania State University 57506-2 When the first edition of Aerodynamics, Aeronautics, and Flight Mechanics was published, it quickly became one of the most important teaching and reference tools in the field. Not only did generations of students learn from it, they continue to use it on the job-the first edition remains one of the most well-thumbed guides you'll find in an airplane company. Now this classic text/reference is available in a bold new edition. All new material and the interweaving of the computer throughout make the Second Edition even more practical and current than before! A New Edition as Complete and Applied as the First Both analytical and applied in nature, Aerodynamics, Aeronautics, and Flight Mechanics presents all necessary derivations to understand basic principles and then applies this material to specific examples. You'll find complete coverage of the full range of topics, from aerodynamics to propulsion to performance to stability and control. Plus, the new Second Edition boasts the same careful integration of concepts that was an acclaimed feature of the previous edition. For example, Chapters 9, 10, and 11 give a fully integrated presentation of static, dynamic, and automatic stability and control. These three chapters form the basis of a complete course on stability and control. New Features You'll Find in the Second Edition * A new chapter on helicopter and V/STOL aircraft- introduces a phase of aerodynamics not covered in most current texts * Even more material than the previous edition, including coverage of stealth airplanes and delta wings * Extensive use of the computer throughout- each chapter now contains several computer exercises * A computer disk with programs written by the author is available
Download or read book Flight Mechanics Modeling and Analysis written by Jitendra R. Raol and published by CRC Press. This book was released on 2023-03-31 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flight Mechanics Modeling and Analysis comprehensively covers flight mechanics and flight dynamics using a systems approach. This book focuses on applied mathematics and control theory in its discussion of flight mechanics to build a strong foundation for solving design and control problems in the areas of flight simulation and flight data analysis. The second edition has been expanded to include two new chapters and coverage of aeroservoelastic topics and engineering mechanics, presenting more concepts of flight control and aircraft parameter estimation. This book is intended for senior undergraduate aerospace students taking Aircraft Mechanics, Flight Dynamics & Controls, and Flight Mechanics courses. It will also be of interest to research students and R&D project-scientists of the same disciplines. Including end-of-chapter exercises and illustrative examples with a MATLAB®-based approach, this book also includes a Solutions Manual and Figure Slides for adopting instructors. Features: • Covers flight mechanics, flight simulation, flight testing, flight control, and aeroservoelasticity. • Features artificial neural network- and fuzzy logic-based aspects in modeling and analysis of flight mechanics systems: aircraft parameter estimation and reconfiguration of control. • Focuses on a systems-based approach. • Includes two new chapters, numerical simulation examples with MATLAB®-based implementations, and end-of-chapter exercises. • Includes a Solutions Manual and Figure Slides for adopting instructors.
Download or read book AIAA Atmospheric Flight Mechanics Conference written by and published by . This book was released on 1987 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Airborne Wind Energy written by Roland Schmehl and published by Springer. This book was released on 2018-03-31 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides in-depth coverage of the latest research and development activities concerning innovative wind energy technologies intended to replace fossil fuels on an economical basis. A characteristic feature of the various conversion concepts discussed is the use of tethered flying devices to substantially reduce the material consumption per installed unit and to access wind energy at higher altitudes, where the wind is more consistent. The introductory chapter describes the emergence and economic dimension of airborne wind energy. Focusing on “Fundamentals, Modeling & Simulation”, Part I includes six contributions that describe quasi-steady as well as dynamic models and simulations of airborne wind energy systems or individual components. Shifting the spotlight to “Control, Optimization & Flight State Measurement”, Part II combines one chapter on measurement techniques with five chapters on control of kite and ground stations, and two chapters on optimization. Part III on “Concept Design & Analysis” includes three chapters that present and analyze novel harvesting concepts as well as two chapters on system component design. Part IV, which centers on “Implemented Concepts”, presents five chapters on established system concepts and one chapter about a subsystem for automatic launching and landing of kites. In closing, Part V focuses with four chapters on “Technology Deployment” related to market and financing strategies, as well as on regulation and the environment. The book builds on the success of the first volume “Airborne Wind Energy” (Springer, 2013), and offers a self-contained reference guide for researchers, scientists, professionals and students. The respective chapters were contributed by a broad variety of authors: academics, practicing engineers and inventors, all of whom are experts in their respective fields.
