EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Hot Deformation and Processing of Aluminum Alloys

Download or read book Hot Deformation and Processing of Aluminum Alloys written by Hugh J. McQueen and published by CRC Press. This book was released on 2011-09-28 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatise on the hot working of aluminum and its alloys, Hot Deformation and Processing of Aluminum Alloys details the possible microstructural developments that can occur with hot deformation of various alloys, as well as the kind of mechanical properties that can be anticipated. The authors take great care to explain and differentiate hot working in the context of other elevated temperature phenomena, such as creep, superplasticity, cold working, and annealing. They also pay particular attention to the fundamental mechanisms of aluminum plasticity at hot working temperatures. Using extensive analysis derived from polarized light optical microscopy (POM), transmission electron microscopy (TEM), x-ray diffraction (XRD) scanning electron-microscopy with electron backscatter imaging (SEM-EBSD), and orientation imaging microscopy (OIM), the authors examine those microstructures that evolve in torsion, compression, extrusion, and rolling. Further microstructural analysis leads to detailed explanations of dynamic recovery (DRV), static recovery (SRV), discontinuous dynamic recrystallization (dDRX), discontinuous static recrystallization (dSRX), grain defining dynamic recovery (gDRV) (formerly geometric dynamic recrystallization, or gDRX), and continuous dynamic recrystallization involving both a single phase (cDRX/1-phase) and multiple phases (cDRX/2-phase). A companion to other works that focus on modeling, manufacturing involving plastic and superplastic deformation, and control of texture and phase transformations, this book provides thorough explanations of microstructural development to lay the foundation for further study of the mechanisms of thermomechanical processes and their application.

Book Corrosion and Protection

Download or read book Corrosion and Protection written by Einar Bardal and published by Springer Science & Business Media. This book was released on 2007-06-14 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion and Protection is an essential guide for mechanical, marine and civil engineering students and also provides a valuable reference for practicing engineers. Bardal combines a description of practical corrosion processes and problems with a theoretical explanation of the various types and forms of corrosion, with a central emphasis on the connections between practical problems and basic scientific principles. This well thought-out introduction to corrosion science, with excellent examples and useful tables, is also extremely well illustrated with 167 diagrams and photographs. Readers with a limited background in chemistry can also find it accessible.

Book Light Alloys

Download or read book Light Alloys written by Ian Polmear and published by Elsevier. This book was released on 2005-11-11 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive overview of the science and metallurgy of aluminum, magnesium, titanium and beryllium alloys, this is the only book available covering the background materials science, properties, manufacturing processes and applications of these key engineering metals in a single accessible volume. Use of these metals is now more widespread than ever, and they are routinely found in motor vehicles and aircraft. New material includes materials characteristics and applications; heat treatment properties; fabrication; microstructure/property relationships; new applications and processes. The definitive single volume overview New material on processing, characteristics and applications of these essential metals Covers the latest applications and processes in the auto and aero industries

Book Correction Formulae for the Stress Distribution in Round Tensile Specimens at Neck Presence

Download or read book Correction Formulae for the Stress Distribution in Round Tensile Specimens at Neck Presence written by Magdalena Gromada and published by Springer Science & Business Media. This book was released on 2011-08-13 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: The monograph deals with methods to determine mechanical properties and evaluate the flow curve of ductile materials from the tensile test. It presents classical hypotheses concerning the onset of neck creation as well as the state of the art in determining the mechanical properties from the tensile test, with emphasis on the consequences of the neck formation. It revises derivations of formulae for the stress distribution in the minimal cross-section of the axisymmetrical specimen in the classical approaches proposed by Bridgman, Davidenkov / Spiridonova and Siebel as well as in the less famous formulae derived by Szczepinski and Malinin / Petrosjan. The revision is completed with solutions evaluated by the authors. In the monograph, the simplifying assumptions utilised in the classical approaches were carefully verified by numerical simulations accompanied by theoretical analysis. Errors imposed in the evaluation of the average axial stress acting on the minimal cross-section as a result of every particular simplification are estimated. The accuracy of all formulae to evaluate the flow curve is discussed. The significance of a high accurate determination can be seen in the context of numerical simulation (e.g. finite element computations), where the total error and accuracy is partly based on the accuracy of the material input.

Book Light Metals 2012

Download or read book Light Metals 2012 written by Carlos Suarez and published by Springer. This book was released on 2016-12-23 with total page 1314 pages. Available in PDF, EPUB and Kindle. Book excerpt: An update of the definitive annual reference source in the field of aluminum production and related light metals technologies, a great mix of materials science and practical, applied technology surrounding aluminum, bauxite, aluminum reduction, rolling, casting, and production.

Book Corrosion of Aluminium

Download or read book Corrosion of Aluminium written by Christian Vargel and published by Elsevier. This book was released on 2004-10-02 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion of Aluminium highlights the practical and general aspects of the corrosion of aluminium alloys with many illustrations and references. In addition to that, the first chapter allows the reader who is not very familiar with aluminium to understand the metallurgical, chemical and physical features of the aluminium alloys. The author Christian Vargel, has adopted a practitioner approach, based on the expertise and experience gained from a 40 year career in aluminium corrosion This approach is most suitable for assessing the corrosion resistance of aluminium- an assessment which is one of the main conditions for the development of many uses of aluminium in transport, construction, power transmission etc. - 600 bibliographic references provide a comprehensive guide to over 100 years of related study - Providing practical applications to the reader across many industries - Accessible to both the beginner and the expert

Book Aluminum Alloys  Contemporary Research and Applications

Download or read book Aluminum Alloys Contemporary Research and Applications written by A. K. Vasudevan and published by Elsevier. This book was released on 2012-12-02 with total page 727 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the structure and properties of the current and potential aluminum alloys in terms of their structure (and structural transformations by new processing methods) and the relationship between structure and mechanical and other properties. The alternative materials that challenge aluminum are considered as well, since the challenge of new competitive materials is a strong influence on innovation. The book bridges the gap between current scientific understanding and engineering practice. It is an up-to-date reference that will be of use to researchers and advanced students in metallurgy and materials engineering.

Book Aluminum

    Book Details:
  • Author : John E. Hatch
  • Publisher : ASM International
  • Release : 1984-01-01
  • ISBN : 9780871701763
  • Pages : 452 pages

Download or read book Aluminum written by John E. Hatch and published by ASM International. This book was released on 1984-01-01 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive information for the American aluminium industry Collective effort of 53 recognized experts on aluminium and aluminium alloys Joint venture by world renowned authorities-the Aluminium Association Inc. and American Society for Metals. The completely updated source of information on aluminium industry as a whole rather than its individual contributors. this book is an opportunity to gain from The knowledge of the experts working for prestigious companies such as Alcoa, Reynolds Metals Co., Alcan International Ltd., Kaiser Aluminium & Chemical Corp., Martin Marietta Laboratories and Anaconda Aluminium Co. It took four years of diligent work to complete this comprehensive successor to the classic volume, Aluminium, published by ASM in 1967. Contents: Properties of Pure Aluminum Constitution of Alloys Microstructure of Alloys Work Hardening Recovery, Recrystalization and Growth Metallurgy of Heat Treatment and General Principles of Precipitation Hardening Effects of Alloying Elements and Impurities on Properties Corrosion Behaviour Properties of Commercial Casting Alloys Properties of Commercial Wrought Alloys Aluminum Powder and Powder Metallurgy Products.

Book Modeling of the Damage Mechanisms in AlMgSi Alloys

Download or read book Modeling of the Damage Mechanisms in AlMgSi Alloys written by Denis Lassance and published by Presses univ. de Louvain. This book was released on 2006 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the growth in importance of the aluminium industry, has come increased demand to invest into the quality improvement of the different aluminium based hot extruded products. One of the main mechanisms, which can influence deformation at high temperature within the 6xxx aluminium, is linked to the presence of the AlFeSi intermetallic phases. These phases severely restrict hot workability when present as hard and brittle plate-like precipitates b-AlFeSi. Damage initiation occurs in these alloys by decohesion or fracture of these intermetallic inclusions. The understanding and modeling of the deformation and fracture behavior of aluminium alloys at room and at hot working temperature is very important for optimizing manufacturing processes such as extrusion. The ductility of 6xxx aluminium alloys can be directly related to chemical composition and to the microstructural evolution occurring during the heat treatment procedures preceding extrusion if proper physics based deformation and fracture models are used. In this thesis, room temperature and hot tensile tests are adopted to address the problem xperimentally. The damage evolution mechanisms is defined at various temperatures and a micromechanics based model of the Gurson type considering several populations of cavities nucleated by different second phase particles groups is developed on the basis of the experimental observations. This model allows relating quantitatively microstructure and ductility at various temperatures strain rates and stress triaxialities. Finite element simulations based on an enhanced micromechanics-based model are used to validate the model. Finally, the effect of some key factors that determine the extrudability of aluminium is also discussed and a correlation between the ductility calculations in uniaxial tension and the maximum extrusion speed is developed for one defined profile.

Book Encyclopedia of Aluminum and Its Alloys  Two Volume Set  Print

Download or read book Encyclopedia of Aluminum and Its Alloys Two Volume Set Print written by George E. Totten and published by CRC Press. This book was released on 2018-12-07 with total page 2957 pages. Available in PDF, EPUB and Kindle. Book excerpt: This encyclopedia, written by authoritative experts under the guidance of an international panel of key researchers from academia, national laboratories, and industry, is a comprehensive reference covering all major aspects of metallurgical science and engineering of aluminum and its alloys. Topics covered include extractive metallurgy, powder metallurgy (including processing), physical metallurgy, production engineering, corrosion engineering, thermal processing (processes such as metalworking and welding, heat treatment, rolling, casting, hot and cold forming), surface engineering and structure such as crystallography and metallography.

Book Extrusion of Aluminium Alloys

Download or read book Extrusion of Aluminium Alloys written by T. Sheppard and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years the importance of extruded alloys has increased due to the decline in copper extrusion, increased use in structural applications, environmental impact and reduced energy consumption. There have also been huge technical advances. This text provides comprehensive coverage of the metallurgical, mathematical and practical features of the process.

Book Corrosion of Aluminum and Aluminum Alloys

Download or read book Corrosion of Aluminum and Aluminum Alloys written by Joseph R. Davis and published by ASM International. This book was released on 1999-01-01 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Light Metal Alloys Applications

Download or read book Light Metal Alloys Applications written by Waldemar Alfredo Monteiro and published by BoD – Books on Demand. This book was released on 2014-06-11 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lightweight alloys have become of great importance in engineering for construction of transportation equipment. At present, the metals that serve as the base of the principal light alloys are aluminum and magnesium. One of the most important lightweight alloys are the aluminum alloys in use for several applications (structural components wrought aluminum alloys, parts and plates). However, some casting parts that have low cost of production play important role in aircraft parts. Magnesium and its alloys are among the lightest of all metals and the sixth most abundant metal on earth. Magnesium is ductile and the most machinable of all metals. Many of these light weight alloys have appropriately high strength to warrant their use for structural purposes, and as a result of their use, the total weight of transportation equipment has been considerably decreased.

Book Light Metals 2022

Download or read book Light Metals 2022 written by Dmitry Eskin and published by Springer Nature. This book was released on 2022-02-05 with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Light Metals symposia at the TMS Annual Meeting & Exhibition present the most recent developments, discoveries, and practices in primary aluminum science and technology. The annual Light Metals volume has become the definitive reference in the field of aluminum production and related light metal technologies. The 2022 collection includes contributions from the following symposia: • Alumina and Bauxite • Aluminum Alloys, Processing and Characterization • Aluminum Reduction Technology • Aluminum Reduction Technology Joint Session with REWAS: Decarbonizing the Metals Industry • Cast Shop Technology • Electrode Technology for Aluminum Production • Primary Aluminum Industry—Energy and Emission Reductions: An LMD Symposium in Honor of Halvor Kvande • Recycling and Sustainability in Cast Shop Technology: Joint Session with REWAS 2022

Book 13th International Conference on Aluminum Alloys  ICAA 13

Download or read book 13th International Conference on Aluminum Alloys ICAA 13 written by Hasso Weiland and published by Springer. This book was released on 2017-02-28 with total page 1857 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a collection of papers presented at the 13th International Conference on Aluminum Alloys (ICAA-13), the premier global conference for exchanging emerging knowledge on the structure and properties of aluminum materials. The papers are organized around the topics of the science of aluminum alloy design for a range of market applications; the accurate prediction of material properties; novel aluminum products and processes; and emerging developments in recycling and applications using both monolithic and multi-material solutions.

Book Diffusion in Solids

Download or read book Diffusion in Solids written by Helmut Mehrer and published by Springer Science & Business Media. This book was released on 2007-07-24 with total page 645 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the central aspects of diffusion in solids, and goes on to provide easy access to important information about diffusion in metals, alloys, semiconductors, ion-conducting materials, glasses and nanomaterials. Coverage includes diffusion-controlled phenomena including ionic conduction, grain-boundary and dislocation pipe diffusion. This book will benefit graduate students in such disciplines as solid-state physics, physical metallurgy, materials science, and geophysics, as well as scientists in academic and industrial research laboratories.

Book Intelligent Manufacturing and Energy Sustainability

Download or read book Intelligent Manufacturing and Energy Sustainability written by A.N.R. Reddy and published by Springer Nature. This book was released on 2020-02-14 with total page 842 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes selected, high-quality papers presented at the International Conference on Intelligent Manufacturing and Energy Sustainability (ICIMES 2019) held at the Department of Mechanical Engineering, Malla Reddy College of Engineering & Technology (MRCET), Maisammaguda, Hyderabad, India, from 21 to 22 June 2019. It covers topics in the areas of automation, manufacturing technology and energy sustainability.