Download or read book Introduction to Structural Dynamics and Aeroelasticity written by Dewey H. Hodges and published by Cambridge University Press. This book was released on 2014-01-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides an introduction to structural dynamics and aeroelasticity, with an emphasis on conventional aircraft. The primary areas considered are structural dynamics, static aeroelasticity, and dynamic aeroelasticity. The structural dynamics material emphasizes vibration, the modal representation, and dynamic response. Aeroelastic phenomena discussed include divergence, aileron reversal, airload redistribution, unsteady aerodynamics, flutter, and elastic tailoring. More than one hundred illustrations and tables help clarify the text, and more than fifty problems enhance student learning. This text meets the need for an up-to-date treatment of structural dynamics and aeroelasticity for advanced undergraduate or beginning graduate aerospace engineering students. Praise from the First Edition "Wonderfully written and full of vital information by two unequalled experts on the subject, this text meets the need for an up-to-date treatment of structural dynamics and aeroelasticity for advanced undergraduate or beginning graduate aerospace engineering students." - Current Engineering Practice "Hodges and Pierce have written this significant publication to fill an important gap in aeronautical engineering education. Highly recommended." - Choice ". . . a welcome addition to the textbooks available to those with interest in aeroelasticity. . . . As a textbook, it serves as an excellent resource for advanced undergraduate and entry-level graduate courses in aeroelasticity. . . . Furthermore, practicing engineers interested in a background in aeroelasticity will find the text to be a friendly primer." - AIAA Bulletin

Download or read book Introduction to Aircraft Aeroelasticity and Loads written by Jan Robert Wright and published by John Wiley & Sons. This book was released on 2008-02-28 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aeroelastic phenomena arising from the interaction of aerodynamic, elastic and inertia forces, and the loads resulting from flight / ground manoeuvres and gust / turbulence encounters, have a significant influence upon aircraft design. The prediction of aircraft aeroelastic stability, response and loads requires application of a range of interrelated engineering disciplines. This new textbook introduces the foundations of aeroelasticity and loads for the flexible aircraft, providing an understanding of the main concepts involved and relating them to aircraft behaviour and industrial practice. This book includes the use of simplified mathematical models to demonstrate key aeroelastic and loads phenomena including flutter, divergence, control effectiveness and the response and loads resulting from flight / ground manoeuvres and gust / turbulence encounters. It provides an introduction to some up-to-date methodologies for aeroelastics and loads modelling. It lays emphasis on the strong link between aeroelasticity and loads. It also includes provision of MATLAB and SIMULINK programs for the simplified analyses. It offers an overview of typical industrial practice in meeting certification requirements.

Download or read book Uncertainty Quantification in Laminated Composites written by Sudip Dey and published by CRC Press. This book was released on 2018-09-19 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last few decades, uncertainty quantification in composite materials and structures has gained a lot of attention from the research community as a result of industrial requirements. This book presents computationally efficient uncertainty quantification schemes following meta-model-based approaches for stochasticity in material and geometric parameters of laminated composite structures. Several metamodels have been studied and comparative results have been presented for different static and dynamic responses. Results for sensitivity analyses are provided for a comprehensive coverage of the relative importance of different material and geometric parameters in the global structural responses.

Download or read book A Modern Course in Aeroelasticity written by E.H. Dowell and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aeroelasticity is the study of flexible structures situated in a flowing fluid. Its modern origins are in the field of aerospace engineering, but it has now expanded to include phenomena arising in other fields such as bioengineering, civil engineering, mechanical engineering and nuclear engineering. The present volume is a teaching text for a first, and possibly second, course in aeroelasticity. It will also be useful as a reference source on the fundamentals of the subject for practitioners. In this third edition, several chapters have been revised and three new chapters added. The latter include a brief introduction to `Experimental Aeroelasticity', an overview of a frontier of research `Nonlinear Aeroelasticity', and the first connected, authoritative account of `Aeroelastic Control' in book form. The authors are drawn from a range of fields including aerospace engineering, civil engineering, mechanical engineering, rotorcraft and turbomachinery. Each author is a leading expert in the subject of his chapter and has many years of experience in consulting, research and teaching.

Download or read book Reliability based Design written by Singiresu S. Rao and published by McGraw-Hill Companies. This book was released on 1992 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: S.S. Rao presents the principles of reliability-based engineering and design in a simple and straight-forward approach. He addresses the design of mechanical components and systems; Monte Carlo simulation; reliability-based optimum design; strength-based reliability and interface theory; reliability testing; time-dependent reliability of components and systems; failure modes, event tree and fault tree analysis; quality control and reliability; modeling of geometry; weakest-link and fail-safe systems; maintainability and availability; extremal distributions; random variables and probability distributions; functions of random variables; and basic probability theory. With 254 illustrations and an index.

Download or read book Handbook of Wind Energy Aerodynamics written by Bernhard Stoevesandt and published by Springer Nature. This book was released on 2022-08-04 with total page 1495 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides both a comprehensive overview and deep insights on the state-of-the-art methods used in wind turbine aerodynamics, as well as their advantages and limits. The focus of this work is specifically on wind turbines, where the aerodynamics are different from that of other fields due to the turbulent wind fields they face and the resultant differences in structural requirements. It gives a complete picture of research in the field, taking into account the different approaches which are applied. This book would be useful to professionals, academics, researchers and students working in the field.

Download or read book Airborne Wind Energy written by Roland Schmehl and published by Springer. This book was released on 2018-03-31 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides in-depth coverage of the latest research and development activities concerning innovative wind energy technologies intended to replace fossil fuels on an economical basis. A characteristic feature of the various conversion concepts discussed is the use of tethered flying devices to substantially reduce the material consumption per installed unit and to access wind energy at higher altitudes, where the wind is more consistent. The introductory chapter describes the emergence and economic dimension of airborne wind energy. Focusing on “Fundamentals, Modeling & Simulation”, Part I includes six contributions that describe quasi-steady as well as dynamic models and simulations of airborne wind energy systems or individual components. Shifting the spotlight to “Control, Optimization & Flight State Measurement”, Part II combines one chapter on measurement techniques with five chapters on control of kite and ground stations, and two chapters on optimization. Part III on “Concept Design & Analysis” includes three chapters that present and analyze novel harvesting concepts as well as two chapters on system component design. Part IV, which centers on “Implemented Concepts”, presents five chapters on established system concepts and one chapter about a subsystem for automatic launching and landing of kites. In closing, Part V focuses with four chapters on “Technology Deployment” related to market and financing strategies, as well as on regulation and the environment. The book builds on the success of the first volume “Airborne Wind Energy” (Springer, 2013), and offers a self-contained reference guide for researchers, scientists, professionals and students. The respective chapters were contributed by a broad variety of authors: academics, practicing engineers and inventors, all of whom are experts in their respective fields.

Download or read book Smart Intelligent Aircraft Structures SARISTU written by Piet Christof Wölcken and published by Springer. This book was released on 2015-09-04 with total page 1025 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book includes the research papers presented in the final conference of the EU funded SARISTU (Smart Intelligent Aircraft Structures) project, held at Moscow, Russia between 19-21 of May 2015. The SARISTU project, which was launched in September 2011, developed and tested a variety of individual applications as well as their combinations. With a strong focus on actual physical integration and subsequent material and structural testing, SARISTU has been responsible for important progress on the route to industrialization of structure integrated functionalities such as Conformal Morphing, Structural Health Monitoring and Nanocomposites. The gap- and edge-free deformation of aerodynamic surfaces known as conformal morphing has gained previously unrealized capabilities such as inherent de-icing, erosion protection and lightning strike protection, while at the same time the technological risk has been greatly reduced. Individual structural health monitoring techniques can now be applied at the part-manufacturing level rather than via extending an aircraft’s time in the final assembly line. And nanocomposites no longer lose their improved properties when trying to upscale from neat resin testing to full laminate testing at element level. As such, this book familiarizes the reader with the most significant develo pments, achievements and key technological steps which have been made possible through the four-year long cooperation of 64 leading entities from 16 different countries with the financial support of the European Commission.

Download or read book Fibrous Composites in Structural Design written by Edward M. Lenoe and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fourth Conference on Fibrous Composites in Structural Design was a successor to the First-to-Third Conferences on Fibrous Composites in Flight Vehicle Design sponsored by the Air Force (First and Second Conferences, September 1973 and May 1974) and by NASA (Third Conference, November 1975) which were aimed at focusing national attention on flight vehicle applications of a new class of fiber reinforced materials, the advanced com posites, which afforded weight savings and other advantages which had not been previously available. The Fourth Conference, held at San Diego, California, 14-17 November 1978, was the fi rst of these conferences to be jointly sponsored by the Army, Navy and Ai r Force together with NASA, as well as being the first to give attention to non-aerospace applications of fiber reinforced composites. While the design technology for aerospace applications has reached a state of relative maturity, other areas of application such as mi litary bridging, flywheel energy storage systems, ship and surface vessel components and ground vehicle components are in an early stage of development, and it was an important objective to pinpoint where careful attention to structural design was needed in such applications to achfeve maximum structural performance payoff together with a high level of reliability and attractive economics.

Download or read book Introduction to Nonlinear Aeroelasticity written by Grigorios Dimitriadis and published by John Wiley & Sons. This book was released on 2017-03-10 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Nonlinear Aeroelasticity Introduces the latest developments and technologies in the area of nonlinear aeroelasticity Nonlinear aeroelasticity has become an increasingly popular research area in recent years. There have been many driving forces behind this development, increasingly flexible structures, nonlinear control laws, materials with nonlinear characteristics and so on. Introduction to Nonlinear Aeroelasticity covers the theoretical basics in nonlinear aeroelasticity and applies the theory to practical problems. As nonlinear aeroelasticity is a combined topic, necessitating expertise from different areas, the book introduces methodologies from a variety of disciplines such as nonlinear dynamics, bifurcation analysis, unsteady aerodynamics, non-smooth systems and others. The emphasis throughout is on the practical application of the theories and methods, so as to enable the reader to apply their newly acquired knowledge Key features: Covers the major topics in nonlinear aeroelasticity, from the galloping of cables to supersonic panel flutter Discusses nonlinear dynamics, bifurcation analysis, numerical continuation, unsteady aerodynamics and non-smooth systems Considers the practical application of the theories and methods Covers nonlinear dynamics, bifurcation analysis and numerical methods Accompanied by a website hosting Matlab code Introduction to Nonlinear Aeroelasticity is a comprehensive reference for researchers and workers in industry and is also a useful introduction to the subject for graduate and undergraduate students across engineering disciplines.

Download or read book Composite Structures written by I.H. Marshall and published by Springer. This book was released on 1991-09-30 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers contained herein were presented at the Sixth International Conference on Composite Structures (ICCS/6) held at Paisley College, Scotland in September 1991. The Conference was organised and sponsored by Paisley College. It was co-sponsored by Scottish Enterprise, the National Engineering Laboratory, the US Army Research, Development and Standardisation Group-UK, Strathclyde Regional Council and Renfrew District Council. It forms a natural and ongoing progression from the highly successful ICCS/1/2/3/4 and 5 held at Paisley in 1981, 1983, 1985, 1987 and 1989 respectively. As we enter the final decade of this century many organisations throughout the world are adopting a prophetic role by attempting to forecast future scientific advances and their associated impact on mankind. Although some would argue that to do so is folly, without such futuristic visionaries the world would be that much poorer. IntelJigent speculation based on research trends and historical advances, rather than fanciful theories, breathes a healthy air of enthusiasm into the scientific community. Surely this is the very oxygen necessary to ignite the fir~s of innovation and invention amongst pioneers of research.

Download or read book Charges Et Les Sp cifications Des Avions Militaires written by North Atlantic Treaty Organization. Advisory Group for Aerospace Research and Development. Structures and Materials Panel. Meeting and published by . This book was released on 1997 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book ECO COMPASS written by Xiaosu Yi and published by MDPI. This book was released on 2019-04-25 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, mainly man-made materials, such as carbon and glass fibers, are used to produce composite parts in aviation. Renewable materials, such as natural fibers or bio-sourced resin systems, have not yet found their way into aviation. The project ECO-COMPASS aims to evaluate the potential applications of ecologically improved composite materials in the aviation sector in an international collaboration of Chinese and European partners. Natural fibers such as flax and ramie will be used for different types of reinforcements and sandwich cores. Furthermore, bio-based epoxy resins to substitute bisphenol-A based epoxy resins in secondary structures are under investigation. Adapted material protection technologies to reduce environmental influence and to improve fire resistance are needed to fulfil the demanding safety requirements in aviation. Modelling and simulation of chosen eco-composites aims for an optimized use of materials while a Life Cycle Assessment aims to prove the ecological advantages compared to synthetic state-of-the-art materials. This Special Issue provides selected papers from the project consortium partners.

Download or read book Advances in Structural and Multidisciplinary Optimization written by Axel Schumacher and published by Springer. This book was released on 2017-12-04 with total page 2101 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume includes papers from the WSCMO conference in Braunschweig 2017 presenting research of all aspects of the optimal design of structures as well as multidisciplinary design optimization where the involved disciplines deal with the analysis of solids, fluids or other field problems. Also presented are practical applications of optimization methods and the corresponding software development in all branches of technology.

Download or read book Mechcomp2 written by Antonio J.M. Ferreira and published by Società Editrice Esculapio. This book was released on 2016-05-20 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composites materials have aroused a great interest over the last few decades. Several applications of fibrous composites, functionally graded materials, laminated composites, nano-structured reinforcements, morphing structures, can be found in many engineering fields, such as aerospace, mechanical, naval and civil engineering. The necessity of lightweight structures, smart and adaptive systems, high-level strength, have led both the academic research and the manufacturing development to a recurring employment of these materials. Many journal papers and technical notes have been published extensively over the last seventy years in international scientific journals of different engineering fields. For this reason, the establishment of this second edition of Mechanics of Composites International Conference has appeared appropriate to continue what has been begun during the first edition occurred in 2014 at Stony Brook University (USA). MECHCOMP wants to be an occasion for many researchers from each part of the globe to meet and discuss about the recent advancements regarding the use of composite structures. As a proof of this event, which has taken place in Porto (Portugal), selected plenary and key-note lectures have been collected in the present book.

Download or read book Computational Fluid and Solid Mechanics 2003 written by K.J Bathe and published by Elsevier. This book was released on 2003-06-02 with total page 2485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together the world's leading researchers and practitioners of computational mechanics, these new volumes meet and build on the eight key challenges for research and development in computational mechanics.Researchers have recently identified eight critical research tasks facing the field of computational mechanics. These tasks have come about because it appears possible to reach a new level of mathematical modelling and numerical solution that will lead to a much deeper understanding of nature and to great improvements in engineering design.The eight tasks are: - The automatic solution of mathematical models - Effective numerical schemes for fluid flows - The development of an effective mesh-free numerical solution method - The development of numerical procedures for multiphysics problems - The development of numerical procedures for multiscale problems - The modelling of uncertainties - The analysis of complete life cycles of systems - Education - teaching sound engineering and scientific judgement Readers of Computational Fluid and Solid Mechanics 2003 will be able to apply the combined experience of many of the world's leading researchers to their own research needs. Those in academic environments will gain a better insight into the needs and constraints of the industries they are involved with; those in industry will gain a competitive advantage by gaining insight into the cutting edge research being carried out by colleagues in academia. Features - Bridges the gap between academic researchers and practitioners in industry - Outlines the eight main challenges facing Research and Design in Computational mechanics and offers new insights into the shifting the research agenda - Provides a vision of how strong, basic and exciting education at university can be harmonized with life-long learning to obtain maximum value from the new powerful tools of analysis

Download or read book Collaborative Product and Service Life Cycle Management for a Sustainable World written by Richard Curran and published by Springer Science & Business Media. This book was released on 2008-08-31 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Collaborative Product and Service Life Cycle Management for a Sustainable World” gathers together papers from the 15th ISPE International Conference on Concurrent Engineering (CE2008), to stimulate the new thinking that is so crucial to our sustained productivity enhancement and quality of life. It is already evident in this new century that the desire for sustainable development is increasingly driving the market to reach for new and innovative solutions that more effectively utilize the resources we have inherited from previous generations; with the obvious responsibility to future generations. Human productivity and progress can be positively engineered and managed in harmony with the provision and needs of our natural environment. One century on from the industrial revolution, this is now the time of the sustainable revolution; requiring holistic technological, process and people integrated solutions to sustained socio-economic enhancement.