Download or read book Aerial Vehicle Based Sensing Framework for Structural Health Monitoring written by and published by RT Parallel Image Processing. This book was released on with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Structural Health Monitoring Using Unmanned Aerial Systems written by Andrew Ellenberg and published by . This book was released on 2017 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of Structural Health Monitoring (SHM) techniques is paramount to the safety and longevity of the structures. Many fields use this approach to monitor the performance of a system through time to determine the proper time and funds associated with repair and replacement. The monitoring of these systems includes nondestructive testing techniques (NDT), sensors permanently installed on the structure, and can also rely heavily on visual inspection. Visual inspection is widely used due to the level of trust owners have in the inspection personnel, however it is time consuming, expensive, and relies heavily on the experience of the inspectors. It is for these reasons that rapid data acquisition platforms must be developed using remote sensing systems to collect, process, and display data to decision makers quickly to make well informed decisions based on quantitative data or provide information for further inspection with a contact technique for targeted inspection. The proposed multirotor Unmanned Aerial System (UAS) platform carries a multispectral imaging payload to collect data and serve as another tool in the SHM cycle. Several demonstrations were performed in a laboratory setting using UAS acquired imagery for identification and measurement of structures. Outdoor validation was completed using a simulated bridge deck and ground based setups on in service structures. Finally, static laboratory measurements were obtained using multispectral patterns to obtain multiscale deformation measurements that will be required for use on a UAS. The novel multiscale, multispectral image analysis using UAS acquired imagery demonstrates the value of the remote sensing system as a nondestructive testing platform and tool for SHM.

Download or read book Structural Health Monitoring with Piezoelectric Wafer Active Sensors written by Victor Giurgiutiu and published by Academic Press. This book was released on 2014-06-20 with total page 1025 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Health Monitoring with Piezoelectric Wafer Active Sensors, Second Edition provides an authoritative theoretical and experimental guide to this fast-paced, interdisciplinary area with exciting applications across a range of industries. The book begins with a detailed yet digestible consolidation of the fundamental theory relating to structural health monitoring (SHM). Coverage of fracture and failure basics, relevant piezoelectric material properties, vibration modes in different structures, and different wave types provide all the background needed to understand SHM and apply it to real-world structural challenges. Moving from theory to experimental practice, the book then provides the most comprehensive coverage available on using piezoelectric wafer active sensors (PWAS) to detect and quantify damage in structures. Updates to this edition include circular and straight-crested Lamb waves from first principle, and the interaction between PWAS and Lamb waves in 1-D and 2-D geometries. Effective shear stress is described, and tuning expressions between PWAS and Lamb waves has been extended to cover axisymmetric geometries with a complete Hankel-transform-based derivation. New chapters have been added including hands-on SHM case studies of PWAS stress, strain, vibration, and wave sensing applications, along with new sections covering essential aspects of vibration and wave propagation in axisymmetric geometries. Comprehensive coverage of underlying theory such as piezoelectricity, vibration, and wave propagation alongside experimental techniques Includes step-by-step guidance on the use of piezoelectric wafer active sensors (PWAS) to detect and quantify damage in structures, including clear information on how to interpret sensor signal patterns Updates to this edition include a new chapter on composites and new sections on advances in vibration and wave theory, bringing this established reference in line with the cutting edge in this emerging area

Download or read book Contemporary Computing written by Sanjay Ranka and published by Springer. This book was released on 2010-08-12 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the second part of the refereed proceedings of the Third International Conference, IC3 2010, held in Noida, India, in August 2010. The 23 revised full papers presented were carefully reviewed and selected from numerous submissions.

Download or read book New Trends in Structural Health Monitoring written by Wieslaw Ostachowicz and published by Springer Science & Business Media. This book was released on 2013-01-18 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: A motivation for structural health monitoring. Structural health monitoring of aircraft structures. Vibration-based damage diagnosis and monitoring of external loads.Statistical time series methods for vibration based structural health monitoring. Fiber optic sensors. Damage localisation using elastic waves propagation methods experimental techniques. Application for wind turbine blades. Experts actively working in structural health monitoring and control techniques present the current research, areas of application and tendencies for the future of this technology, including various design issues involved. Examples using some of the latest hardware and software tools, experimental data from small scale laboratory demonstrators and measurements made on real structures illustrate the book. It will be a reference for professionals and students in the areas of engineering, applied natural sciences and engineering management.

Download or read book Structural Health Monitoring SHM in Aerospace Structures written by Fuh-Gwo Yuan and published by Woodhead Publishing. This book was released on 2016-03-01 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Health Monitoring (SHM) in Aerospace Structures provides readers with the spectacular progress that has taken place over the last twenty years with respect to the area of Structural Health Monitoring (SHM). The widespread adoption of SHM could both significantly improve safety and reduce maintenance and repair expenses that are estimated to be about a quarter of an aircraft fleet’s operating costs. The SHM field encompasses transdisciplinary areas, including smart materials, sensors and actuators, damage diagnosis and prognosis, signal and image processing algorithms, wireless intelligent sensing, data fusion, and energy harvesting. This book focuses on how SHM techniques are applied to aircraft structures with particular emphasis on composite materials, and is divided into four main parts. Part One provides an overview of SHM technologies for damage detection, diagnosis, and prognosis in aerospace structures. Part Two moves on to analyze smart materials for SHM in aerospace structures, such as piezoelectric materials, optical fibers, and flexoelectricity. In addition, this also includes two vibration-based energy harvesting techniques for powering wireless sensors based on piezoelectric electromechanical coupling and diamagnetic levitation. Part Three explores innovative SHM technologies for damage diagnosis in aerospace structures. Chapters within this section include sparse array imaging techniques and phase array techniques for damage detection. The final section of the volume details innovative SHM technologies for damage prognosis in aerospace structures. This book serves as a key reference for researchers working within this industry, academic, and government research agencies developing new systems for the SHM of aerospace structures and materials scientists. Provides key information on the potential of SHM in reducing maintenance and repair costs Analyzes current SHM technologies and sensing systems, highlighting the innovation in each area Encompasses chapters on smart materials such as electroactive polymers and optical fibers

Download or read book Health Monitoring of Aerospace Structures written by Wieslaw Staszewski and published by John Wiley & Sons. This book was released on 2004-04-02 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing quality research for the reader, this title encompasses all the recent developments in smart sensor technology for health monitoring in aerospace structures, providing a valuable introduction to damage detection techniques. Focussing on engineering applications, all chapters are written by smart structures and materials experts from aerospace manufacturers and research/academic institutions. This key reference: Discusses the most important aspects related to smart technologies for damage detection; this includes not only monitoring techniques but also aspects related to specifications, design parameters, assessment and qualification routes. Presents real case studies and applications; this includes in-flight tests; the work presented goes far beyond academic research applications. Displays a balance between theoretical developments and engineering applications

Download or read book Structural Health Monitoring Damage Detection Systems for Aerospace written by Markus G. R. Sause and published by Springer Nature. This book was released on 2021 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book presents established methods of structural health monitoring (SHM) and discusses their technological merit in the current aerospace environment. While the aerospace industry aims for weight reduction to improve fuel efficiency, reduce environmental impact, and to decrease maintenance time and operating costs, aircraft structures are often designed and built heavier than required in order to accommodate unpredictable failure. A way to overcome this approach is the use of SHM systems to detect the presence of defects. This book covers all major contemporary aerospace-relevant SHM methods, from the basics of each method to the various defect types that SHM is required to detect to discussion of signal processing developments alongside considerations of aerospace safety requirements. It will be of interest to professionals in industry and academic researchers alike, as well as engineering students. This article/publication is based upon work from COST Action CA18203 (ODIN - http://odin-cost.com/), supported by COST (European Cooperation in Science and Technology). COST (European Cooperation in Science and Technology) is a funding agency for research and innovation networks. Our Actions help connect research initiatives across Europe and enable scientists to grow their ideas by sharing them with their peers. This boosts their research, career and innovation.

Download or read book European Workshop on Structural Health Monitoring written by Piervincenzo Rizzo and published by Springer Nature. This book was released on 2022-06-15 with total page 1129 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the latest advances, innovations, and applications in the field of structural health monitoring (SHM) and more broadly in the fields of smart materials and intelligent systems, as presented by leading international researchers and engineers at the 10th European Workshop on Structural Health Monitoring (EWSHM), held in Palermo, Italy on July 4-7, 2022. The volume covers highly diverse topics, including signal processing, smart sensors, autonomous systems, remote sensing and support, UAV platforms for SHM, Internet of Things, Industry 4.0, and SHM for civil structures and infrastructures. The contributions, which are published after a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaboration among different specialists.

Download or read book Structural Health Monitoring 2011 written by Fu-Kuo Chang and published by DEStech Publications, Inc. This book was released on 2011 with total page 1397 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 2-volume set of books, comprising over 2,700 total pages, presents 325 fully original presentations on recent advances in structural health monitoring, as applied to commercial and military aircraft (manned and unmanned), high-rise buildings, wind turbines, civil infrastructure, power plants and ships. One general theme of the books is how SHM can be used for condition-based maintenance, with the goal of developing prediction-based systems, designed to save money over the life of vehicles and structures. A second theme centers on technologies for developing systems comprising sensors, diagnostic data and decision-making, with a focus on intelligent materials able to respond to damage and in some cases repair it. Finally the books discuss the relation among data, data interpretation and decision-making in managing a wide variety of complex structures and vehicles. More recent technologies discussed in the books include SHM and environmental effects, energy harvesting, non-contact sensing, and intelligent networks.Material in these books was first presented in September, 2011 at a conference held at Stanford University and sponsored by the Air Force Office of Scientific Research, the Army Research Office, the Office of Naval Research and the National Science Foundation. Some of the highlights of the books include: SHM technologies for condition-based maintenance (CBM) and predictive maintenance Verification, validation, qualification, data mining, prognostics systems for decision-making Structural health, sensing and materials in closed-loop intelligent networks Military and aerospace, bioinspired sensors, wind turbines, monitoring with MEMS, damage sensing, hot spot monitoring, SHM and ships, high-rise structures Includes a fully-searchable CD-ROM displaying many figures and charts in full color

Download or read book Structural Health Monitoring written by Ranjan Ganguli and published by Springer Nature. This book was released on 2020-05-14 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses systems of damage detection and structural health monitoring in mechanical, civil, and aerospace structures. It utilizes principles of fuzzy logic, probability theory, and signal processing to develop systems and approaches that are robust in the presence of both noise in the data and variations in properties of materials which are intrinsic to the process of mass production. This volume will be useful to graduate students, researchers, and engineers working in this area, especially those looking to understand and address model uncertainty in their algorithms.

Download or read book Structural Health Monitoring written by Daniel Balageas and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is organized around the various sensing techniques used to achieve structural health monitoring. Its main focus is on sensors, signal and data reduction methods and inverse techniques, which enable the identification of the physical parameters, affected by the presence of the damage, on which a diagnostic is established. Structural Health Monitoring is not oriented by the type of applications or linked to special classes of problems, but rather presents broader families of techniques: vibration and modal analysis; optical fibre sensing; acousto-ultrasonics, using piezoelectric transducers; and electric and electromagnetic techniques. Each chapter has been written by specialists in the subject area who possess a broad range of practical experience. The book will be accessible to students and those new to the field, but the exhaustive overview of present research and development, as well as the numerous references provided, also make it required reading for experienced researchers and engineers.

Download or read book Structural Health Monitoring written by Alessandro Pegoretti and published by SAE International. This book was released on 2018-11-20 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Health Management (SHM) is a key part of the Integrated Vehicle Health Management (IVHM) approach, whose main aim is to develop an integrated end-to-end system to monitor the overall health of a vehicle. Structural Health Monitoring: Current State and Future Trends, edited by Professor Alessandro Pegoretti, a scholar from the University of Trento in Italy, introduces the reader to recent developments involved in health monitoring of aerospace structures. The chapters, represented by seminal SAE International technical papers, offer an overview of the most recent advances in the sensing techniques for SHM, analysis of SHM data and its applications in aerospace. SHM can allow a continuous in-service inspection of the vehicle, thus reducing the cost associated with manual inspection at predetermined time intervals. The availability of reliable information on the loading conditions and health state of structural components by the implementation of SHM can be beneficial for several reasons, such as: • To prevent catastrophic failure • To reduce the number and the cost of unnecessary inspections • To improve the design of structural parts, with a reduction of the weight and the costs of overdesigned components Structural Health Monitoring: Current State and Future Trends offers a unique perspective on this field.

Download or read book Computer Vision for Structural Dynamics and Health Monitoring written by Dongming Feng and published by John Wiley & Sons. This book was released on 2021-01-11 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive coverage of theory and hands-on implementation of computer vision-based sensors for structural health monitoring This book is the first to fill the gap between scientific research of computer vision and its practical applications for structural health monitoring (SHM). It provides a complete, state-of-the-art review of the collective experience that the SHM community has gained in recent years. It also extensively explores the potentials of the vision sensor as a fast and cost-effective tool for solving SHM problems based on both time and frequency domain analytics, broadening the application of emerging computer vision sensor technology in not only scientific research but also engineering practice. Computer Vision for Structural Dynamics and Health Monitoring presents fundamental knowledge, important issues, and practical techniques critical to successful development of vision-based sensors in detail, including robustness of template matching techniques for tracking targets; coordinate conversion methods for determining calibration factors to convert image pixel displacements to physical displacements; sensing by tracking artificial targets vs. natural targets; measurements in real time vs. by post-processing; and field measurement error sources and mitigation methods. The book also features a wide range of tests conducted in both controlled laboratory and complex field environments in order to evaluate the sensor accuracy and demonstrate the unique features and merits of computer vision-based structural displacement measurement. Offers comprehensive understanding of the principles and applications of computer vision for structural dynamics and health monitoring Helps broaden the application of the emerging computer vision sensor technology from scientific research to engineering practice such as field condition assessment of civil engineering structures and infrastructure systems Includes a wide range of laboratory and field testing examples, as well as practical techniques for field application Provides MATLAB code for most of the issues discussed including that of image processing, structural dynamics, and SHM applications Computer Vision for Structural Dynamics and Health Monitoring is ideal for graduate students, researchers, and practicing engineers who are interested in learning about this emerging sensor technology and advancing their applications in SHM and other engineering problems. It will also benefit those in civil and aerospace engineering, energy, and computer science.

Download or read book Structural Health Monitoring written by N. Rajic and published by Materials Research Forum LLC. This book was released on 2021-04-15 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents recent advances regarding the inspection and monitoring of engineering structures; including bridges, buildings, aircraft and space structures, nuclear reactors and defense platforms. Among the techniques covered are UAV photogrammetry, strain monitoring, infrared detection, acoustic emission testing, residual stress measurements, fiber optical sensing, thermographic inspection, vibration analysis, piezoelectric sensing and ultrasonic testing. Keywords: Bridges, Buildings, Aircraft Structures, Space Structures, Nuclear Reactors, Defense Platforms, UAV Photogrammetry, Strain Monitoring, Infrared Detection, Acoustic Emission Testing, Residual Stress Measurements, Fiber Optical Sensing, Thermographic Inspection, Vibration Analysis, Piezoelectric Sensing, Ultrasonic Testing, Impact Damage, Anaerobic Reactor Performance, Geomembranes, Ossointegrated Implants, Fatigue Crack Growth, Accelerometer, Nonlinear Cable Bracing, Timber Utility Poles, Steel Pipes, Loosened Bolts on Pipes, IMU-based Motion Capture, CFRP Composites, Maglev Guideway Girder, Cable-Pylon Anchorage, Deep Learning Techniques.

Download or read book European Workshop on Structural Health Monitoring written by Piervincenzo Rizzo and published by Springer Nature. This book was released on 2021-01-08 with total page 847 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the latest advances, innovations, and applications in the field of structural health monitoring (SHM) and more broadly in the fields of smart materials and intelligent systems. The volume covers highly diverse topics, including signal processing, smart sensors, autonomous systems, remote sensing and support, UAV platforms for SHM, Internet of Things, Industry 4.0, and SHM for civil structures and infrastructures. The contributions, which are published after a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaboration among different specialists. The contents of this volume reflect the outcomes of the activities of EWSHM (European Workshop on Structural Health Monitoring) in 2020.

Download or read book Structural Sensing Health Monitoring and Performance Evaluation written by D. Huston and published by CRC Press. This book was released on 2010-09-21 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural health monitoring (SHM) uses one or more in situ sensing systems placed in or around a structure, providing real-time evaluation of its performance and ultimately preventing structural failure. Although most commonly used in civil engineering, such as in roads, bridges, and dams, SHM is now finding applications in other engineering envir