Download or read book AEM Investigations of Primary Water SCC in Nickel Alloys written by and published by . This book was released on 1997 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: The microstructure of nickel alloys, particularly the grain boundary composition and intergranular precipitates, plays an important role in high temperature primary water stress corrosion cracking (SCC) performance. Analytical electron microscopy (AEM) was used to examine SCC cracks in Alloys 600 and X-750 to investigate the role of grain boundary precipitates, dislocations and oxides in primary water SCC (PWSCC). Analysis of oxides by AEM and ESCA/Auger indicates that the crack tip oxides are different than the oxides formed on the outer surfaces. Comparison of heats with good and poor SCC resistance has identified metallurgical features that affect cracking. These AEM results show that the mechanism of PWSCC in nickel-base alloys does not involve void formation or blunting of the crack tip near intergranular carbides. The role of grain boundary composition, the interaction of cracks with carbides and other intergranular precipitates, and observations from AEM examinations ahead of the crack tip are discussed in relation to the mechanism of SCC.
Download or read book Ninth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems written by Steve Bruemmer and published by John Wiley & Sons. This book was released on 2013-10-18 with total page 1776 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents an exchange of ideas among scientists and engineers about the economic and safety concerns surrounding environmentally induced materials problems which lead to nuclear power plant outages. Scientists and engineers concerned with the environmental degradation processes (corrosion, mechanical, and radiation effects) present their latest results on such topics as life extension/relicensing and materials problems associated with spent fuel storage and radioactive waste disposal. This collection will be of interest to utility engineers, reactor vendor engineers, plant architect engineers, researchers concerned with materials degradation, and consultants involved in design, construction, and operation of water reactors.
Download or read book Intergranular Stress Corrosion Cracking and Selective Internal Oxidation of Ni Cr Fe Alloys in Hydrogenated Steam written by Brent M. Capell and published by . This book was released on 2005 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemistry and Electrochemistry of Corrosion and Stress Corrosion Cracking written by Russell H. Jones and published by Society for Mining Metallurgy & Exploration. This book was released on 2001 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of papers from the 2001 TMS Annual Meeting held in New Orleans includes papers from the symposium on the chemistry and electrochemistry of corrosion and stress corrosion cracking. It covers topics such as chemistry differences between crack initiation and propagation.
Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2726 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Eighth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems Water Reactors written by and published by . This book was released on 1997 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book SCC Initiation in Alloy 600 Heat Affected Zones Exposed to High Temperature Water written by E. Richey and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Studies have shown that grain boundary chromium carbides improve the stress corrosion cracking (SCC) resistance of nickel based alloys exposed to high temperature, high purity water. However, thermal cycles from welding can significantly alter the microstructure of the base material near the fusion line. In particular, the heat of welding can solutionize grain boundary carbides and produce locally high residual stresses and strains, reducing the SCC resistance of the Alloy 600 type material in the heat affected zone (HAZ). Testing has shown that the SCC growth rate in Alloy 600 heat affected zone samples can be {approx}30x faster than observed in the Alloy 600 base material under identical testing conditions due to fewer intergranular chromium rich carbides and increased plastic strain in the HAZ [1, 2]. Stress corrosion crack initiation tests were conducted on Alloy 600 HAZ samples at 360 C in hydrogenated, deaerated water to determine if these microstructural differences significantly affect the SCC initiation resistance of Alloy 600 heat affected zones compared to the Alloy 600 base material. Alloy 600 to EN82H to Alloy 600 heat-affected-zone (HAZ) specimens where fabricated from an Alloy 600 to Alloy 600 narrow groove weld with EN82H filler metal. The approximate middle third of the specimen gauge region was EN82H such that each specimen had two HAZ regions. Tests were conducted with in-situ monitored smooth tensile specimens under a constant load, and a direct current electric potential drop was used for in-situ detection of SCC. Test results suggest that the SCC initiation resistance of Alloy 600 and its weld metal follows the following order: EN82H> Alloy 600 HAZ> Alloy 600. The high SCC initiation resistance observed to date in Alloy 600 heat affected zones compared to wrought Alloy 600 is unexpected based on the microstructure of HAZ versus wrought material and based on prior SCC growth rate studies. The observed behavior for the HAZ specimens is likely not related to differences in the environment, differences in surface stress/strain between the various specimen regions (weld, HAZ, wrought), differences in surface residual stress, or differences in the microstructure of the various specimen regions (weld, HAZ, wrought). The behavior may be related to differences in the creep behavior of the various weld regions or differences in the surface area of the various materials (weld, HAZ, wrought) exposed to high temperature water.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1988 with total page 1224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1987 with total page 964 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book INIS Atomindex written by and published by . This book was released on 1988 with total page 948 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gaseous Hydrogen Embrittlement of Materials in Energy Technologies written by Richard P Gangloff and published by Elsevier. This book was released on 2012-01-16 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many modern energy systems are reliant on the production, transportation, storage, and use of gaseous hydrogen. The safety, durability, performance and economic operation of these systems is challenged by operating-cycle dependent degradation by hydrogen of otherwise high performance materials. This important two-volume work provides a comprehensive and authoritative overview of the latest research into managing hydrogen embrittlement in energy technologies.Volume 1 is divided into three parts, the first of which provides an overview of the hydrogen embrittlement problem in specific technologies including petrochemical refining, automotive hydrogen tanks, nuclear waste disposal and power systems, and H2 storage and distribution facilities. Part two then examines modern methods of characterization and analysis of hydrogen damage and part three focuses on the hydrogen degradation of various alloy classesWith its distinguished editors and international team of expert contributors, Volume 1 of Gaseous hydrogen embrittlement of materials in energy technologies is an invaluable reference tool for engineers, designers, materials scientists, and solid mechanicians working with safety-critical components fabricated from high performance materials required to operate in severe environments based on hydrogen. Impacted technologies include aerospace, petrochemical refining, gas transmission, power generation and transportation. - Summarises the wealth of recent research on understanding and dealing with the safety, durability, performance and economic operation of using gaseous hydrogen at high pressure - Reviews how hydrogen embrittlement affects particular sectors such as the petrochemicals, automotive and nuclear industries - Discusses how hydrogen embrittlement can be characterised and its effects on particular alloy classes
Download or read book Stress Corrosion Cracking of Nickel Based Alloys in Water cooled Nuclear Reactors written by Damien Feron and published by Woodhead Publishing. This book was released on 2016-01-30 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stress Corrosion Cracking of Nickel Based Alloys in Water-Cooled Nuclear Reactors: The Coriou Effect presents the latest information on brittle failure of metals in corrosive chemical environments under the influence of tensile stresses. Nickel alloys are more resistant to SCC as well as high temperatures and have been widely used in more challenging environments such as nuclear power plants. However, these alloys can suffer SCC under certain conditions, resulting in component failure. A key figure in understanding the mechanisms of SCC in nickel alloys in water-cooled nuclear reactors is Henri Coriou of the CEA, France's leading center for nuclear research. This book assesses his work in the context of the latest research on SCC in nickel alloys in nuclear power plants. - Up-to-date reviews of recent research findings from leading experts in the field - Authoritative and comprehensively reviewed by the Working Party 4 on Nuclear Corrosion - Showcases the excellent quality and technical accomplishments of Henri Coriou and CEA
Download or read book Superalloys written by Matthew J. Donachie and published by ASM International. This book was released on 2002 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers virtually all technical aspects related to the selection, processing, use, and analysis of superalloys. The text of this new second edition has been completely revised and expanded with many new figures and tables added. In developing this new edition, the focus has been on providing comprehensive and practical coverage of superalloys technology. Some highlights include the most complete and up-to-date presentation available on alloy melting. Coverage of alloy selection provides many tips and guidelines that the reader can use in identifying an appropriate alloy for a specific application. The relation of properties and microstructure is covered in more detail than in previous books.
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1994 with total page 1502 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metals Abstracts written by and published by . This book was released on 1990-07 with total page 1466 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Corrosion Science and Engineering written by Damien Feron and published by Elsevier. This book was released on 2012-02-21 with total page 1073 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion of nuclear materials, i.e. the interaction between these materials and their environments, is a major issue for plant safety as well as for operation and economic competitiveness. Understanding these corrosion mechanisms, the systems and materials they affect, and the methods to accurately measure their incidence is of critical importance to the nuclear industry. Combining assessment techniques and analytical models into this understanding allows operators to predict the service life of corrosion-affected nuclear plant materials, and to apply the most appropriate maintenance and mitigation options to ensure safe long term operation.This book critically reviews the fundamental corrosion mechanisms that affect nuclear power plants and facilities. Initial sections introduce the complex field of nuclear corrosion science, with detailed chapters on the different types of both aqueous and non aqueous corrosion mechanisms and the nuclear materials susceptible to attack from them. This is complemented by reviews of monitoring and control methodologies, as well as modelling and lifetime prediction approaches. Given that corrosion is an applied science, the final sections review corrosion issues across the range of current and next-generation nuclear reactors, and across such nuclear applications as fuel reprocessing facilities, radioactive waste storage and geological disposal systems.With its distinguished editor and international team of expert contributors, Nuclear corrosion science and engineering is an invaluable reference for nuclear metallurgists, materials scientists and engineers, as well as nuclear facility operators, regulators and consultants, and researchers and academics in this field. - Comprehensively reviews the fundamental corrosion mechanisms that affect nuclear power plants and facilities - Chapters assess different types of both aqueous and non aqueous corrosion mechanisms and the nuclear materials susceptible to attack from them - Considers monitoring and control methodologies, as well as modelling and lifetime prediction approaches
Download or read book Environmental Engineering Dictionary and Directory written by Thomas M. Pankratz and published by CRC Press. This book was released on 2000-09-22 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Like most technical disciplines, environmental science and engineering is becoming increasingly specialized. As industry professionals focus on specific environmental subjects they become less familiar with environmental problems and solutions outside their area of expertise. This situation is compounded by the fact that many environmental science
