Download or read book Blowout and Well Control Handbook written by Robert D. Grace and published by Gulf Professional Publishing. This book was released on 2017-05-26 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Blowout and Well Control Handbook, Second Edition, brings the engineer and rig personnel up to date on all the useful methods, equipment, and project details needed to solve daily well control challenges. Blowouts are the most expensive and one of the most preventable accidents in the oil and gas industry. While some rig crews experience frequent well control incidents, some go years before seeing the real thing. Either way, the crew must always be prepared with quick understanding of the operations and calculations necessary to maintain well control. Updated to cover the lessons learned and new technology following the Macondo incident, this fully detailed reference will cover detection of influxes and losses in equipment and methods, a greater emphasis on kick tolerance considerations, an expanded section on floating drilling and deepwater floating drilling procedures, and a new blowout case history from Bangladesh. With updated photos, case studies, and practice examples, Blowout and Well Control Handbook, Second Edition will continue to deliver critical and modern well control information to ensure engineers and personnel stay safe, environmentally-responsible, and effective on the rig. - Features updated and new case studies including a chapter devoted to the lessons learned and new procedures following Macondo - Teaches new technology such as liquid packer techniques and a new chapter devoted to relief well design and operations - Improves on both offshore and onshore operations with expanded material and photos on special conditions, challenges, and control procedures throughout the entire cycle of the well

Download or read book Advanced Well Control written by David Watson and published by . This book was released on 2003 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Well Control addresses all phases of well control, from the design stage of a well through plug and abandonment.

Download or read book Advanced Well Completion Engineering written by Renpu Wan and published by Gulf Professional Publishing. This book was released on 2011-08-23 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt: Once a natural gas or oil well is drilled, and it has been verified that commercially viable, it must be "completed" to allow for the flow of petroleum or natural gas out of the formation and up to the surface. This process includes: casing, pressure and temperature evaluation, and the proper instillation of equipment to ensure an efficient flow out of the well. In recent years, these processes have been greatly enhanced by new technologies. Advanced Well Completion Engineering summarizes and explains these advances while providing expert advice for deploying these new breakthrough engineering systems. The book has two themes: one, the idea of preventing damage, and preventing formation from drilling into an oil formation to putting the well introduction stage; and two, the utilization of nodal system analysis method, which optimizes the pressure distribution from reservoir to well head, and plays the sensitivity analysis to design the tubing diameters first and then the production casing size, so as to achieve whole system optimization. With this book, drilling and production engineers should be able to improve operational efficiency by applying the latest state of the art technology in all facets of well completion during development drilling-completion and work over operations. - One of the only books devoted to the key technologies for all major aspects of advanced well completion activities. - Unique coverage of all aspects of well completion activities based on 25 years in the exploration, production and completion industry. - Matchless in-depth technical advice for achieving operational excellence with advance solutions.

Download or read book Advanced Blowout Well Control written by Robert D. Grace and published by Gulf Professional Publishing. This book was released on 1994 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Full text engineering e-book.

Download or read book An Introduction to Well Control Calculations for Drilling Operations written by Dave Cormack and published by Springer. This book was released on 2017-08-10 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book removes the mystery and pressure from calculations by equipping readers with the tools they need to understand calculations and how they work. This is done by using straight-forward language and showing fully worked out, rig-based examples throughout. The book comprises of mini lessons which are never more than two pages long and a complete lesson is always in view when the book is open in front of you. Lessons progress in a logical manner and once the book is finished, the reader is ready for any calculations that could be encountered at well control school. It is a great tool for rig crew members who are afraid of calculations or have not done any math since school. I found it easy to follow with clear explanations and it flowed from topic to topic. A definite addition to the rig crews training toolbox. Malcolm Lodge (at the time of writing Technical Director of the Well Control Institute)

Download or read book Macondo Well Deepwater Horizon Blowout written by National Research Council and published by National Academies Press. This book was released on 2012-03-02 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: The blowout of the Macondo well on April 20, 2010, led to enormous consequences for the individuals involved in the drilling operations, and for their families. Eleven workers on the Deepwater Horizon drilling rig lost their lives and 16 others were seriously injured. There were also enormous consequences for the companies involved in the drilling operations, to the Gulf of Mexico environment, and to the economy of the region and beyond. The flow continued for nearly 3 months before the well could be completely killed, during which time, nearly 5 million barrels of oil spilled into the gulf. Macondo Well-Deepwater Horizon Blowout examines the causes of the blowout and provides a series of recommendations, for both the oil and gas industry and government regulators, intended to reduce the likelihood and impact of any future losses of well control during offshore drilling. According to this report, companies involved in offshore drilling should take a "system safety" approach to anticipating and managing possible dangers at every level of operation-from ensuring the integrity of wells to designing blowout preventers that function under all foreseeable conditions-in order to reduce the risk of another accident as catastrophic as the Deepwater Horizon explosion and oil spill. In addition, an enhanced regulatory approach should combine strong industry safety goals with mandatory oversight at critical points during drilling operations. Macondo Well-Deepwater Horizon Blowout discusses ultimate responsibility and accountability for well integrity and safety of offshore equipment, formal system safety education and training of personnel engaged in offshore drilling, and guidelines that should be established so that well designs incorporate protection against the various credible risks associated with the drilling and abandonment process. This book will be of interest to professionals in the oil and gas industry, government decision makers, environmental advocacy groups, and others who seek an understanding of the processes involved in order to ensure safety in undertakings of this nature.

Download or read book Advances in Oil and Gas Well Engineering written by Yongcun Feng and published by BoD – Books on Demand. This book was released on 2024-03-13 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Worldwide oil and gas development has shifted from conventional reservoirs to unconventional and deepwater reservoirs, characterized by high pressure, high temperature, ultra-low permeability, and extensively developed natural fractures. This transition to increasingly hostile environments introduces new challenges in well drilling and completion, such as downhole drilling issues, formation damage, and reduced productivity. Aiming to solve the challenges, drilling and completion technologies have excelled greatly in the past two decades. This book covers managed pressure drilling (MPD), the role of artificial intelligence (AI) in refining drilling processes, and the transformative effects of digitalization and automation. Emphasizing efficiency, safety, and environmental responsibility, the book also integrates methods like casing while drilling for improved efficiency, advanced diagnostics for rig safety, stabilization techniques for wellbores in fractured reservoirs, cement sheath integrity maintenance, and the optimization of continuous gas lift. Bridging theoretical concepts with practical applications, the narrative offers insights into both operational techniques and safety strategies, drawing from past experiences. The current state-of-the-art theories, technologies, and practices are covered, bridging the gaps between fundamental theories and engineering applications.

Download or read book Advances in Missile Guidance Control and Estimation written by S.N. Balakrishnan and published by CRC Press. This book was released on 2016-04-19 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stringent demands on modern guided weapon systems require new approaches to guidance, control, and estimation. There are requirements for pinpoint accuracy, low cost per round, easy upgrade paths, enhanced performance in counter-measure environments, and the ability to track low-observable targets. Advances in Missile Guidance, Control, and Estimat

Download or read book Introduction to Permanent Plug and Abandonment of Wells written by Mahmoud Khalifeh and published by Springer Nature. This book was released on 2020-01-27 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book offers a timely guide to challenges and current practices to permanently plug and abandon hydrocarbon wells. With a focus on offshore North Sea, it analyzes the process of plug and abandonment of hydrocarbon wells through the establishment of permanent well barriers. It provides the reader with extensive knowledge on the type of barriers, their functioning and verification. It then discusses plug and abandonment methodologies, analyzing different types of permanent plugging materials. Last, it describes some tests for verifying the integrity and functionality of installed permanent barriers. The book offers a comprehensive reference guide to well plugging and abandonment (P&A) and well integrity testing. The book also presents new technologies that have been proposed to be used in plugging and abandoning of wells, which might be game-changing technologies, but they are still in laboratory or testing level. Given its scope, it addresses students and researchers in both academia and industry. It also provides information for engineers who work in petroleum industry and should be familiarized with P&A of hydrocarbon wells to reduce the time of P&A by considering it during well planning and construction.

Download or read book Petroleum Engineering Handbook written by Larry W. Lake and published by . This book was released on 2006 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Petroleum Engineering Handbook has long been recognized as a valuable comprehensive reference book that offers practical day-to-day applications for students and experienced engineering professionals alike. Available now in 7 Volumes, Volume 1 covers General Engineering topics including chapters on mathematics, fluid properties (fluid sampling techniques; properties and correlations of oil, gas, condensate, and water; hydrocarbon phase behavior and phase diagrams for hydrocarbon systems; the phase behavior of water/hydrocarbon systems; and the properties of waxes, asphaltenes, and crude oil emulsions), rock properties (bulk rock properties, permeability, relative permeability, and capillary pressure), the economic and regulatory environment, and the role of fossil energy in the 21st century energy mix.

Download or read book Code of Federal Regulations written by and published by . This book was released on 1993 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Code of Federal Regulations of the United States of America written by and published by . This book was released on 1991 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Code of Federal Regulations is the codification of the general and permanent rules published in the Federal Register by the executive departments and agencies of the Federal Government.

Download or read book Advances in Human Factors Ergonomics and Safety in Manufacturing and Service Industries written by Waldemar Karwowski and published by CRC Press. This book was released on 2010-06-24 with total page 1252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is concerned with the human factors, ergonomics, and safety issues related to the design of products, processes, and systems, as well as operation and management of business enterprises in both manufacturing and service sectors of contemporary industry. The book is organized into ten sections that focus on the following subject matters:

Download or read book Federal Register written by and published by . This book was released on 2013-02 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Terrestrial Drilling written by Yoseph Bar-Cohen and published by CRC Press. This book was released on 2020-12-23 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Terrestrial Drilling: Ground, Ice, and Underwater includes the latest drilling and excavation principles and processes for terrestrial environments. The chapters cover the history of drilling and excavation, drill types, drilling techniques and their advantages and associated issues, rock coring including acquisition, damage control, caching and transport, and data interpretation, as well as unconsolidated soil drilling and borehole stability. This book includes a description of the basic science of the drilling process, associated processes of breaking and penetrating various media, the required hardware, and the process of excavation and analysis of the sampled media. Describes recent advances in terrestrial drilling. Discusses drilling in the broadest range of media including terrestrial surfaces, ice and underwater from shallow penetration to very deep. Provides an in-depth description of key drilling techniques and the unified approach to assessing the required tools for given drilling requirements. Discusses environmental effects on drilling, current challenges of drilling and excavation, and methods that are used to address these. Examines novel drilling and excavation approaches. Dr. Yoseph Bar-Cohen is the Supervisor of the Electroactive Technologies Group (http://ndeaa.jpl.nasa.gov/) and a Senior Research Scientist at the Jet Propulsion Lab/Caltech, Pasadena, CA. His research is focused on electro-mechanics including planetary sample handling mechanisms, novel actuators that are driven by such materials as piezoelectric and EAP (also known as artificial muscles), and biomimetics. Dr. Kris Zacny is a Senior Scientist and Vice President of Exploration Systems at Honeybee Robotics, Altadena, CA. His expertise includes space mining, sample handling, soil and rock mechanics, extraterrestrial drilling, and In Situ Resource Utilization (ISRU).

Download or read book Well Control for Completions and Interventions written by Howard Crumpton and published by Gulf Professional Publishing. This book was released on 2018-04-04 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: Well Control for Completions and Interventions explores the standards that ensure safe and efficient production flow, well integrity and well control for oil rigs, focusing on the post-Macondo environment where tighter regulations and new standards are in place worldwide. Too many training facilities currently focus only on the drilling side of the well's cycle when teaching well control, hence the need for this informative guide on the topic. This long-awaited manual for engineers and managers involved in the well completion and intervention side of a well's life covers the fundamentals of design, equipment and completion fluids. In addition, the book covers more important and distinguishing components, such as well barriers and integrity envelopes, well kill methods specific to well completion, and other forms of operations that involve completion, like pumping and stimulation (including hydraulic fracturing and shale), coiled tubing, wireline, and subsea intervention. - Provides a training guide focused on well completion and intervention - Includes coverage of subsea and fracturing operations - Presents proper well kill procedures - Allows readers to quickly get up-to-speed on today's regulations post-Macondo for well integrity, barrier management and other critical operation components

Download or read book Advances in Terrestrial and Extraterrestrial Drilling written by Yoseph Bar-Cohen and published by CRC Press. This book was released on 2021-08-26 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers both the most recent advances in terrestrial and extraterrestrial drilling. Discusses drilling in the broadest range of media including ground, ice, underwater and planetary surfaces from shallow to very deep. Provides a comprehensive description of key drilling techniques and the efforts to develop unified approach to assessing the required tools for given drilling requirements. Discusses how environment affects drilling and approaches to addressing the effects and current challenges of drilling and excavation on other planets. Examines novel drilling and excavation approaches.