Download or read book Advances in Waveform Agile Sensing for Tracking written by Sandeep Prasad Sira and published by Springer Nature. This book was released on 2022-05-31 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in sensor technology and information processing afford a new flexibility in the design of waveforms for agile sensing. Sensors are now developed with the ability to dynamically choose their transmit or receive waveforms in order to optimize an objective cost function. This has exposed a new paradigm of significant performance improvements in active sensing: dynamic waveform adaptation to environment conditions, target structures, or information features. The manuscript provides a review of recent advances in waveform-agile sensing for target tracking applications. A dynamic waveform selection and configuration scheme is developed for two active sensors that track one or multiple mobile targets. A detailed description of two sequential Monte Carlo algorithms for agile tracking are presented, together with relevant Matlab code and simulation studies, to demonstrate the benefits of dynamic waveform adaptation. The work will be of interest not only to practitioners of radar and sonar, but also other applications where waveforms can be dynamically designed, such as communications and biosensing. Table of Contents: Waveform-Agile Target Tracking Application Formulation / Dynamic Waveform Selection with Application to Narrowband and Wideband Environments / Dynamic Waveform Selection for Tracking in Clutter / Conclusions / CRLB Evaluation for Gaussian Envelope GFM Chirp from the Ambiguity Function / CRLB Evaluation from the Complex Envelope
Download or read book Adaptive High Resolution Sensor Waveform Design for Tracking written by Ioannis Kyriakides and published by Springer Nature. This book was released on 2022-05-31 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent innovations in modern radar for designing transmitted waveforms, coupled with new algorithms for adaptively selecting the waveform parameters at each time step, have resulted in improvements in tracking performance. Of particular interest are waveforms that can be mathematically designed to have reduced ambiguity function sidelobes, as their use can lead to an increase in the target state estimation accuracy. Moreover, adaptively positioning the sidelobes can reveal weak target returns by reducing interference from stronger targets. The manuscript provides an overview of recent advances in the design of multicarrier phase-coded waveforms based on Bjorck constant-amplitude zero-autocorrelation (CAZAC) sequences for use in an adaptive waveform selection scheme for mutliple target tracking. The adaptive waveform design is formulated using sequential Monte Carlo techniques that need to be matched to the high resolution measurements. The work will be of interest to both practitioners and researchers in radar as well as to researchers in other applications where high resolution measurements can have significant benefits. Table of Contents: Introduction / Radar Waveform Design / Target Tracking with a Particle Filter / Single Target tracking with LFM and CAZAC Sequences / Multiple Target Tracking / Conclusions
Download or read book Advances in Waveform agile Sensing for Tracking written by Sandeep Prasad Sira and published by Morgan & Claypool Publishers. This book was released on 2009 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in sensor technology and information processing afford a new flexibility in the design of waveforms for agile sensing. Sensors are now developed with the ability to dynamically choose their transmit or receive waveforms in order to optimize an objective cost function. This has exposed a new paradigm of significant performance improvements in active sensing: dynamic waveform adaptation to environment conditions, target structures, or information features. The manuscript provides a review of recent advances in waveform-agile sensing for target tracking applications. A dynamic waveform selection and configuration scheme is developed for two active sensors that track one or multiple mobile targets. A detailed description of two sequential Monte Carlo algorithms for agile tracking are presented, together with relevant Matlab code and simulation studies, to demonstrate the benefits of dynamic waveform adaptation. The work will be of interest not only to practitioners of radar and sonar, but also other applications where waveforms can be dynamically designed, such as communications and biosensing. Table of Contents: Waveform-Agile Target Tracking Application Formulation / Dynamic Waveform Selection with Application to Narrowband and Wideband Environments / Dynamic Waveform Selection for Tracking in Clutter / Conclusions / CRLB Evaluation for Gaussian Envelope GFM Chirp from the Ambiguity Function / CRLB Evaluation from the Complex Envelope
Download or read book Signal Processing for Multistatic Radar Systems written by Ngoc Hung Nguyen and published by Academic Press. This book was released on 2019-10-25 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Signal Processing for Multistatic Radar Systems: Adaptive Waveform Selection, Optimal Geometries and Pseudolinear Tracking Algorithms addresses three important aspects of signal processing for multistatic radar systems, including adaptive waveform selection, optimal geometries and pseudolinear tracking algorithms. A key theme of the book is performance optimization for multistatic target tracking and localization via waveform adaptation, geometry optimization and tracking algorithm design. Chapters contain detailed mathematical derivations and algorithmic development that are accompanied by simulation examples and associated MATLAB codes. This book is an ideal resource for university researchers and industry engineers in radar, radar signal processing and communications engineering. - Develops waveform selection algorithms in a multistatic radar setting to optimize target tracking performance - Assesses the optimality of a given target-sensor geometry and designs optimal geometries for target localization using mobile sensors - Gives an understanding of low-complexity and high-performance pseudolinear estimation algorithms for target localization and tracking in multistatic radar systems - Contains the MATLAB codes for the examples used in the book
Download or read book Cognitive Fusion for Target Tracking written by Ioannis Kyriakides and published by Springer Nature. This book was released on 2022-05-31 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt: The adaptive configuration of nodes in a sensor network has the potential to improve sequential estimation performance by intelligently allocating limited sensor network resources. In addition, the use of heterogeneous sensing nodes provides a diversity of information that also enhances estimation performance. This work reviews cognitive systems and presents a cognitive fusion framework for sequential state estimation using adaptive configuration of heterogeneous sensing nodes and heterogeneous data fusion. This work also provides an application of cognitive fusion to the sequential estimation problem of target tracking using foveal and radar sensors.
Download or read book Secure Sensor Cloud written by Vimal Kumar and published by Springer Nature. This book was released on 2022-05-31 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sensor cloud is a new model of computing paradigm for Wireless Sensor Networks (WSNs), which facilitates resource sharing and provides a platform to integrate different sensor networks where multiple users can build their own sensing applications at the same time. It enables a multi-user on-demand sensory system, where computing, sensing, and wireless network resources are shared among applications. Therefore, it has inherent challenges for providing security and privacy across the sensor cloud infrastructure. With the integration of WSNs with different ownerships, and users running a variety of applications including their own code, there is a need for a risk assessment mechanism to estimate the likelihood and impact of attacks on the life of the network. The data being generated by the wireless sensors in a sensor cloud need to be protected against adversaries, which may be outsiders as well as insiders. Similarly, the code disseminated to the sensors within the sensor cloud needs to be protected against inside and outside adversaries. Moreover, since the wireless sensors cannot support complex and energy-intensive measures, the lightweight schemes for integrity, security, and privacy of the data have to be redesigned. The book starts with the motivation and architecture discussion of a sensor cloud. Due to the integration of multiple WSNs running user-owned applications and code, the possibility of attacks is more likely. Thus, next, we discuss a risk assessment mechanism to estimate the likelihood and impact of attacks on these WSNs in a sensor cloud using a framework that allows the security administrator to better understand the threats present and take necessary actions. Then, we discuss integrity and privacy preserving data aggregation in a sensor cloud as it becomes harder to protect data in this environment. Integrity of data can be compromised as it becomes easier for an attacker to inject false data in a sensor cloud, and due to hop by hop nature, privacy of data could be leaked as well. Next, the book discusses a fine-grained access control scheme which works on the secure aggregated data in a sensor cloud. This scheme uses Attribute Based Encryption (ABE) to achieve the objective. Furthermore, to securely and efficiently disseminate application code in sensor cloud, we present a secure code dissemination algorithm which first reduces the amount of code to be transmitted from the base station to the sensor nodes. It then uses Symmetric Proxy Re-encryption along with Bloom filters and Hash-based Message Authentication Code (HMACs) to protect the code against eavesdropping and false code injection attacks.
Download or read book Sensor Analysis for the Internet of Things written by Michael Stanley and published by Springer Nature. This book was released on 2022-06-01 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt: While it may be attractive to view sensors as simple transducers which convert physical quantities into electrical signals, the truth of the matter is more complex. The engineer should have a proper understanding of the physics involved in the conversion process, including interactions with other measurable quantities. A deep understanding of these interactions can be leveraged to apply sensor fusion techniques to minimize noise and/or extract additional information from sensor signals. Advances in microcontroller and MEMS manufacturing, along with improved internet connectivity, have enabled cost-effective wearable and Internet of Things sensor applications. At the same time, machine learning techniques have gone mainstream, so that those same applications can now be more intelligent than ever before. This book explores these topics in the context of a small set of sensor types. We provide some basic understanding of sensor operation for accelerometers, magnetometers, gyroscopes, and pressure sensors. We show how information from these can be fused to provide estimates of orientation. Then we explore the topics of machine learning and sensor data analytics.
Download or read book A Survey of Blur Detection and Sharpness Assessment Methods written by Juan Andrade and published by Springer Nature. This book was released on 2022-06-01 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt: Blurring is almost an omnipresent effect on natural images. The main causes of blurring in images include: (a) the existence of objects at different depths within the scene which is known as defocus blur; (b) blurring due to motion either of objects in the scene or the imaging device; and (c) blurring due to atmospheric turbulence. Automatic estimation of spatially varying sharpness/blurriness has several applications including depth estimation, image quality assessment, information retrieval, image restoration, among others. There are some cases in which blur is intentionally introduced or enhanced; for example, in artistic photography and cinematography in which blur is intentionally introduced to emphasize a certain image region. Bokeh is a technique that introduces defocus blur with aesthetic purposes. Additionally, in trending applications like augmented and virtual reality usually, blur is introduced in order to provide/enhance depth perception. Digital images and videos are produced every day in astonishing amounts and the demand for higher quality is constantly rising which creates a need for advanced image quality assessment. Additionally, image quality assessment is important for the performance of image processing algorithms. It has been determined that image noise and artifacts can affect the performance of algorithms such as face detection and recognition, image saliency detection, and video target tracking. Therefore, image quality assessment (IQA) has been a topic of intense research in the fields of image processing and computer vision. Since humans are the end consumers of multimedia signals, subjective quality metrics provide the most reliable results; however, their cost in addition to time requirements makes them unfeasible for practical applications. Thus, objective quality metrics are usually preferred.
Download or read book Maritime Informatics written by Mikael Lind and published by Springer Nature. This book was released on 2020-11-14 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first book on Maritime Informatics describes the potential for Maritime Informatics to enhance the shipping industry. It examines how decision making in the industry can be improved by digital technology, and introduces the technology required to make Maritime Informatics a distinct and valuable discipline. Based on participating in EU funded research over the last six years to improve the shipping industry, the editors stipulate that there is a need for the new discipline of Maritime Informatics, which studies the application of information systems to increasing the efficiency, safety, and ecological sustainability of the world’s shipping industry. This book examines competition and collaboration between shipping companies, and also companies who serve shipping needs, such as ports and terminals. Practical examples from leading experts give the reader real world examples for better understanding.
Download or read book Advances in Modern Blind Signal Separation Algorithms written by Kostas Kokkinakis and published by Morgan & Claypool Publishers. This book was released on 2010 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: Investigates one of the most commercially attractive applications of blind signal separation (BSS), which is the simultaneous recovery of signals inside a reverberant (naturally echoing) environment, using two (or more) microphones. This text provides insight on recent advances in algorithms, which are ideally suited for blind signal separation of convolutive speech mixtures.
Download or read book Virtual Design of an Audio Lifelogging System written by Brian Mears and published by Springer Nature. This book was released on 2022-06-01 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: The availability of inexpensive, custom, highly integrated circuits is enabling some very powerful systems that bring together sensors, smart phones, wearables, cloud computing, and other technologies. To design these types of complex systems we are advocating a top-down simulation methodology to identify problems early. This approach enables software development to start prior to expensive chip and hardware development. We call the overall approach virtual design. This book explains why simulation has become important for chip design and provides an introduction to some of the simulation methods used. The audio lifelogging research project demonstrates the virtual design process in practice. The goals of this book are to: explain how silicon design has become more closely involved with system design; show how virtual design enables top down design; explain the utility of simulation at different abstraction levels; show how open source simulation software was used in audio lifelogging. The target audience for this book are faculty, engineers, and students who are interested in developing digital devices for Internet of Things (IoT) types of products.
Download or read book Despeckle Filtering for Ultrasound Imaging and Video written by Christos P. Loizou and published by Morgan & Claypool Publishers. This book was released on 2015-04-01 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is well known that speckle is a multiplicative noise that degrades image and video quality and the visual expert's evaluation in ultrasound imaging and video. This necessitates the need for robust despeckling image and video techniques for both routine
Download or read book Despeckle Filtering for Ultrasound Imaging and Video Volume II written by Christos P. Loizou and published by Springer Nature. This book was released on 2022-06-01 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: In ultrasound imaging and video visual perception is hindered by speckle multiplicative noise that degrades the quality. Noise reduction is therefore essential for improving the visual observation quality or as a pre-processing step for further automated analysis, such as image/video segmentation, texture analysis and encoding in ultrasound imaging and video. The goal of the first book (book 1 of 2 books) was to introduce the problem of speckle in ultrasound image and video as well as the theoretical background, algorithmic steps, and the MatlabTM for the following group of despeckle filters: linear despeckle filtering, non-linear despeckle filtering, diffusion despeckle filtering, and wavelet despeckle filtering. The goal of this book (book 2 of 2 books) is to demonstrate the use of a comparative evaluation framework based on these despeckle filters (introduced on book 1) on cardiovascular ultrasound image and video processing and analysis. More specifically, the despeckle filtering evaluation framework is based on texture analysis, image quality evaluation metrics, and visual evaluation by experts. This framework is applied in cardiovascular ultrasound image/video processing on the tasks of segmentation and structural measurements, texture analysis for differentiating between two classes (i.e. normal vs disease) and for efficient encoding for mobile applications. It is shown that despeckle noise reduction improved segmentation and measurement (of tissue structure investigated), increased the texture feature distance between normal and abnormal tissue, improved image/video quality evaluation and perception and produced significantly lower bitrates in video encoding. Furthermore, in order to facilitate further applications we have developed in MATLABTM two different toolboxes that integrate image (IDF) and video (VDF) despeckle filtering, texture analysis, and image and video quality evaluation metrics. The code for these toolsets is open source and these are available to download complementary to the two monographs.
Download or read book Analysis of the MPEG 1 Layer III MP3 Algorithm using MATLAB written by Andreas Spanias and published by Springer Nature. This book was released on 2022-05-31 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MPEG-1 Layer III (MP3) algorithm is one of the most successful audio formats for consumer audio storage and for transfer and playback of music on digital audio players. The MP3 compression standard along with the AAC (Advanced Audio Coding) algorithm are associated with the most successful music players of the last decade. This book describes the fundamentals and the MATLAB implementation details of the MP3 algorithm. Several of the tedious processes in MP3 are supported by demonstrations using MATLAB software. The book presents the theoretical concepts and algorithms used in the MP3 standard. The implementation details and simulations with MATLAB complement the theoretical principles. The extensive list of references enables the reader to perform a more detailed study on specific aspects of the algorithm and gain exposure to advancements in perceptual coding. Table of Contents: Introduction / Analysis Subband Filter Bank / Psychoacoustic Model II / MDCT / Bit Allocation, Quantization and Coding / Decoder
Download or read book Algorithms and Software for Predictive and Perceptual Modeling of Speech written by Venkatraman Atti and published by Springer Nature. This book was released on 2022-05-31 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the early pulse code modulation-based coders to some of the recent multi-rate wideband speech coding standards, the area of speech coding made several significant strides with an objective to attain high quality of speech at the lowest possible bit rate. This book presents some of the recent advances in linear prediction (LP)-based speech analysis that employ perceptual models for narrow- and wide-band speech coding. The LP analysis-synthesis framework has been successful for speech coding because it fits well the source-system paradigm for speech synthesis. Limitations associated with the conventional LP have been studied extensively, and several extensions to LP-based analysis-synthesis have been proposed, e.g., the discrete all-pole modeling, the perceptual LP, the warped LP, the LP with modified filter structures, the IIR-based pure LP, all-pole modeling using the weighted-sum of LSP polynomials, the LP for low frequency emphasis, and the cascade-form LP. These extensions can be classified as algorithms that either attempt to improve the LP spectral envelope fitting performance or embed perceptual models in the LP. The first half of the book reviews some of the recent developments in predictive modeling of speech with the help of MatlabTM Simulation examples. Advantages of integrating perceptual models in low bit rate speech coding depend on the accuracy of these models to mimic the human performance and, more importantly, on the achievable "coding gains" and "computational overhead" associated with these physiological models. Methods that exploit the masking properties of the human ear in speech coding standards, even today, are largely based on concepts introduced by Schroeder and Atal in 1979. For example, a simple approach employed in speech coding standards is to use a perceptual weighting filter to shape the quantization noise according to the masking properties of the human ear. The second half of the book reviews some of the recent developments in perceptual modeling of speech (e.g., masking threshold, psychoacoustic models, auditory excitation pattern, and loudness) with the help of MatlabTM simulations. Supplementary material including MatlabTM programs and simulation examples presented in this book can also be accessed here. Table of Contents: Introduction / Predictive Modeling of Speech / Perceptual Modeling of Speech
Download or read book Theory and Applications of Gaussian Quadrature Methods written by Narayan Kovvali and published by Springer Nature. This book was released on 2022-05-31 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gaussian quadrature is a powerful technique for numerical integration that falls under the broad category of spectral methods. The purpose of this work is to provide an introduction to the theory and practice of Gaussian quadrature. We study the approximation theory of trigonometric and orthogonal polynomials and related functions and examine the analytical framework of Gaussian quadrature. We discuss Gaussian quadrature for bandlimited functions, a topic inspired by some recent developments in the analysis of prolate spheroidal wave functions. Algorithms for the computation of the quadrature nodes and weights are described. Several applications of Gaussian quadrature are given, ranging from the evaluation of special functions to pseudospectral methods for solving differential equations. Software realization of select algorithms is provided. Table of Contents: Introduction / Approximating with Polynomials and Related Functions / Gaussian Quadrature / Applications / Links to Mathematical Software
Download or read book Advances in Heuristic Signal Processing and Applications written by Amitava Chatterjee and published by Springer Science & Business Media. This book was released on 2013-06-05 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: There have been significant developments in the design and application of algorithms for both one-dimensional signal processing and multidimensional signal processing, namely image and video processing, with the recent focus changing from a step-by-step procedure of designing the algorithm first and following up with in-depth analysis and performance improvement to instead applying heuristic-based methods to solve signal-processing problems. In this book the contributing authors demonstrate both general-purpose algorithms and those aimed at solving specialized application problems, with a special emphasis on heuristic iterative optimization methods employing modern evolutionary and swarm intelligence based techniques. The applications considered are in domains such as communications engineering, estimation and tracking, digital filter design, wireless sensor networks, bioelectric signal classification, image denoising, and image feature tracking. The book presents interesting, state-of-the-art methodologies for solving real-world problems and it is a suitable reference for researchers and engineers in the areas of heuristics and signal processing.