Download or read book Advances in Ultrasound Technology for Environmental Remediation written by Ta Yeong Wu and published by Springer Science & Business Media. This book was released on 2012-10-20 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past ten years, innovative technologies have shown that advanced oxidation processes are highly promising when applied to the remediation of polluted water or wastewater as they don’t generate any sludge or solid material of hazardous nature. Advances in Ultrasound Technology for Environmental Remediation reviews the fundamentals of ultrasound technology and the state of the art developments in “ultrasound-based free radical generation” in environmental remediation and pollution prevention. It also presents the challenges of introducing ultrasound technology into large-scale environmental remediation applications and examines the methods used to improve ultrasound technology. Indeed, ultrasonic systems are extremely sensitive and vulnerable to operational parameters which cannot be controlled without a good knowledge and understanding of physical and chemical phenomena. Advances in Ultrasound Technology for Environmental Remediation features the theory and fundamentals of ultrasound technology and discusses its potential as an alternative method in environmental remediation.
Download or read book Advances in Sonochemistry written by T.J. Mason and published by Elsevier. This book was released on 2001-06-22 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrasound in Environmental Protection focuses on one of the more significant developments in the subject - environmental remediation - providing an overview on both the fundamentals and applications of ultrasound in environmental protection, incorporating recent research and state-of-the-art information on the scientific basis, modes of use, and engineering developments. A broad spectrum of topics are covered: reactor design, sonochemical pollutant degradation, integrated unltrasonic/ biological treatment, ultrasound in disinfection, leaching by ultrasound, and ultrasonically enhanced removal of suspended solids.Ultrasound is generated and applied at frequencies from 20 kHz to several MHz. The physio-chemical parameters of the sonicated media, reactor design, applied intensity, and duration of sonication, dramatically influence the effects that can be achieved. It is hoped that this compilation will contribute to a better understanding and further development of sonochemistry as a clean technology not only for environmental remediation but also more generally.The foundation of this compilation was formed during a workshop that was held at the Technical University of Hamburg-Harburg, Germany, in March 1999. This was the first workshop to be devoted to 'Ultrasound in Environmental Engineering' and brought together experience and knowledge from a broad spectrum of disciplines including chemistry, biology, engineering, equipment manufacturing, and plant design.
Download or read book Ultrasound in Environmental Protection written by T. J. Mason and published by JAI Press. This book was released on 2001 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrasound in Environmental Protection focuses on one of the more significant developments in the subject - environmental remediation - providing an overview on both the fundamentals and applications of ultrasound in environmental protection, incorporating recent research and state-of-the-art information on the scientific basis, modes of use, and engineering developments. A broad spectrum of topics are covered: reactor design, sonochemical pollutant degradation, integrated unltrasonic/ biological treatment, ultrasound in disinfection, leaching by ultrasound, and ultrasonically enhanced removal of suspended solids. Ultrasound is generated and applied at frequencies from 20 kHz to several MHz. The physio-chemical parameters of the sonicated media, reactor design, applied intensity, and duration of sonication, dramatically influence the effects that can be achieved. It is hoped that this compilation will contribute to a better understanding and further development of sonochemistry as a clean technology not only for environmental remediation but also more generally. The foundation of this compilation was formed during a workshop that was held at the Technical University of Hamburg-Harburg, Germany, in March 1999. This was the first workshop to be devoted to 'Ultrasound in Environmental Engineering' and brought together experience and knowledge from a broad spectrum of disciplines including chemistry, biology, engineering, equipment manufacturing, and plant design.
Download or read book Ultrasound Technology in Green Chemistry written by Mika Sillanpää and published by Springer Science & Business Media. This book was released on 2011-08-26 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a new and rapidly growing science, the applications of ultrasound methods in environmental technology hold a promising future. Compared to conventional methods, ultrasonication can bring several benefits such as being environmentally friendly (no toxic chemical are used or produced), low cost, and compact, allowing on-site treatment. Besides an overview featuring the background behind ultrasonic technology, this brief summarizes the main studies and innovations reported in recent research that has utilized ultrasound methods in environmental analysis, water, and sludge treatment, soil and sediment remediation to air purification.
Download or read book Optimization of Ultrasonic Irradiation as an Advanced Oxidation Technology for Environmental Remediation Using Statistical Design of Experiments written by Babatunde A. Oyenekan and published by . This book was released on 2003 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt: Studies the effects of process parameters (temperature, ultrasonic intensity, irradiation gas and frequency) on sonochemical reactions of gaseous mixtures using a state-of-the-art sonicator. Employs Taguchi Techniques in both experiment planning and analysis of results. ANOVA (analysis of variance) method analyzes the data and gives each factor's relative contribution.
Download or read book Advanced Technologies for Environmental Remediation written by Xijun Hu and published by . This book was released on 2009 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Technologies for Environmental Remediation and Management written by Madhumita B. Ray and published by . This book was released on 2008 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chitosan Based Biomaterials Volume 1 written by Jessica Amber Jennings and published by Woodhead Publishing. This book was released on 2016-09-26 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chitosan Based Biomaterials: Fundamentals, Volume 1, provides the latest information on chitosan, a natural polymer derived from the marine material chitin. Chitosan displays unique properties, most notably biocompatibility and biodegradability. It can also be easily tuned to modify its structure or properties, making chitosan an excellent candidate as a biomaterial. Consequently, chitosan is being developed for many biomedical functions, ranging from tissue engineering and implant coatings to drug and gene delivery. This book looks at the fundamentals of chitosan-based biomaterials. Contains specific focus on the techniques and technologies needed to develop chitosan for biomedical applications Presents a comprehensive treatment of the fundamentals Provides contributions from leading researchers with extensive experience in chitosan
Download or read book Sonochemistry New Opportunities For Green Chemistry written by Gregory Chatel and published by World Scientific Publishing Company. This book was released on 2016-12-22 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of ultrasound waves to chemical reactions — sonochemistry — has huge potential for innovation in eco-friendly and eco-efficient chemistry. Sonochemistry: New Opportunities for Green Chemistry first introduces the basics of ultrasonic waves and the history of sonochemistry before moving on to look at acoustic cavitation and the estimation of ultrasonic parameters. After this comes a discussion of the equipment needed for experimentation with sonochemistry. Finally there is an in-depth look at green sonochemistry in different fields of research, covering concepts such as new combinations of ultrasound with ionic liquids, microwave irradiation, enzyme combination, and sono-assisted electrochemistry. In conclusion, distinguished sonochemists from around the world share their opinions on the green sonochemistry, and their predictions in the field.Undergraduate and graduate students in chemistry, and practitioners of ultrasonic technology will gain a unique insight into the opportunities and challenges facing sonochemistry today in its theoretical and practical implementation.
Download or read book Advances in Membrane Technologies written by Amira Abdelrasoul and published by BoD – Books on Demand. This book was released on 2020-03-04 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Membrane technologies are currently the most effective and sustainable methods utilized in diversified water filtration, wastewater treatment, as well as industrial and sustainable energy applications. This book covers essential subsections of membrane separation and bioseparation processes from the perspectives of technical innovation, novelty, and sustainability. The book offers a comprehensive overview of the latest improvements and concerns with respect to membrane fouling remediation techniques, issues of bioincompatibility for biomedical applications, and various subareas of membrane separation processes, which will be an efficient resource for engineers.
Download or read book Green Food Processing Techniques written by Farid Chemat and published by Academic Press. This book was released on 2019-07-26 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Green Food Processing Techniques: Preservation, Transformation and Extraction advances the ethics and practical objectives of "Green Food Processing" by offering a critical mass of research on a series of methodological and technological tools in innovative food processing techniques, along with their role in promoting the sustainable food industry. These techniques (such as microwave, ultrasound, pulse electric field, instant controlled pressure drop, supercritical fluid processing, extrusion...) lie on the frontier of food processing, food chemistry, and food microbiology, and are thus presented with tools to make preservation, transformation and extraction greener. The Food Industry constantly needs to reshape and innovate itself in order to achieve the social, financial and environmental demands of the 21st century. Green Food Processing can respond to these challenges by enhancing shelf life and the nutritional quality of food products, while at the same time reducing energy use and unit operations for processing, eliminating wastes and byproducts, reducing water use in harvesting, washing and processing, and using naturally derived ingredients. Introduces the strategic concept of Green Food Processing to meet the challenges of the future of the food industry Presents innovative techniques for green food processing that can be used in academia, and in industry in R&D and processing Brings a multidisciplinary approach, with significant contributions from eminent scientists who are actively working on Green Food Processing techniques
Download or read book Advances in Textile Biotechnology written by Artur Cavaco-Paulo and published by Woodhead Publishing. This book was released on 2019-07-07 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Textile Biotechnology, Second Edition examines the latest in biotechnology for the fiber and textile industry. This new edition has been fully revised to include the current essential areas of development in the field, covering both natural and synthetic fibers. Chapters cover the latest technology in bioprocessing for bast fiber, PVA, polyester, wool and silk before exploring issues of enzyme stability. Essential areas of application and development are then considered, including biomedical textiles, silk materials for biotechnological applications, bacterial cellulose, the ink jetting of enzymes, and the role of enzymes, wool and silk fibers. Containing groundbreaking research, this book will be essential reading for manufacturers, designers and engineers in the textiles industry, textile and fiber scientists, and academic researchers and postgraduate students working in the area of textile technology. Provides a thorough overview of current and future focuses of biotechnology in the fiber and textile industry Presents fully revised content, with a new focus on biosynthesis and bioprocessing for novel textile fibers, both synthetic and natural Enables readers to understand and utilize the benefits of biotechnology for the manufacture and production of textiles
Download or read book Advanced Technology in Environmental Remediation and Resource Utilization written by Deling Yuan and published by . This book was released on 2024-03-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the development of industrialization, environmental pollution problems are becoming increasingly severe. This reprint focuses on research related to the environment and energy fields and includes ten research papers and two review papers. This reprint highlights advanced oxidation processes, functional materials adsorption, and environmental microbial technology for water pollution remediation, electrostatic precipitators for air pollution purification, radioactive waste treatment, energy materials, and other topics.
Download or read book Handbook of Food Engineering written by Dennis R. Heldman and published by CRC Press. This book was released on 2018-12-19 with total page 1231 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the complexity of the food supply system increases, the focus on processes used to convert raw food materials and ingredients into consumer food products becomes more important. The Handbook of Food Engineering, Third Edition, continues to provide students and food engineering professionals with the latest information needed to improve the efficiency of the food supply system. As with the previous editions, this book contains the latest information on the thermophysical properties of foods and kinetic constants needed to estimate changes in key components of foods during manufacturing and distribution. Illustrations are used to demonstrate the applications of the information to process design. Researchers should be able to use the information to pursue new directions in process development and design, and to identify future directions for research on the physical properties of foods and kinetics of changes in the food throughout the supply system. Features Covers basic concepts of transport and storage of liquids and solids, heating and cooling of foods, and food ingredients New chapter covers nanoscale science in food systems Includes chapters on mass transfer in foods and membrane processes for liquid concentration and other applications Discusses specific unit operations on freezing, concentration, dehydration, thermal processing, and extrusion The first four chapters of the Third Edition focus primarily on the properties of foods and food ingredients with a new chapter on nanoscale applications in foods. Each of the eleven chapters that follow has a focus on one of the more traditional unit operations used throughout the food supply system. Major revisions and/or updates have been incorporated into chapters on heating and cooling processes, membrane processes, extrusion processes, and cleaning operations.
Download or read book Graphene based Carbocatalysts Synthesis Properties and Applications written by Pinki Bala Punjabi and published by Bentham Science Publishers. This book was released on 2023-05-31 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book informs readers about recent advances in graphene carbocatalysis encapsulating the current developments in the syntheses, properties, characterizations, functionalization and catalytic applications of graphene, its derivatives and composites. It serves as a comprehensive primary reference book for chemistry and engineering students who are required to learn about graphene chemistry in detail. It also serves as an introductory reference for industry professionals and researchers who are interested in graphene research as well as its emerging applications in catalysis and beyond Volume 1 provides an introduction to catalysis and the chemistry of graphene. This is followed by chapters that cover the chemistry of graphene compounds. Next, it covers the functionalization of graphene into catalytic materials and its role in the synthesis of nanocomposites. Finally, the book delves into the complex aspects of graphene carbocatalysis: recent advances in graphene supported palladium catalysts for coupling reactions, applications of graphene-based catalysts in multicomponent, domino reactions, oxidation and reduction reactions, and recent trends in biocatalytic properties of graphene-based composites are all discussed in detail.
Download or read book Structured Foods written by Gnana Moorthy Eswaran U and published by CRC Press. This book was released on 2024-08-07 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structured Foods is an important reference that discusses the recent research trends on structural development in various foods. This book covers different tools and food engineering techniques such as encapsulation, 3D and 4D printing, imaging techniques, and clean meat technology. It discusses how various foods can be broken down and manipulated at the molecular level to improve their quality, safety, and healthfulness. It describes the structuring of components like starch, proteins, and polysaccharides and the stability and bioavailability of different food structures. This is a useful reference for researchers and industry experts in food technology, food engineering, and food processing. The work addresses critical food-related issues that need to be tackled, including harvesting enough food to feed the global population, improving food sustainability, reducing food waste and pollution, and improving human health. Further, it focuses on the new scientific technologies being applied by scientists for an improved food system. The book is an important resource for all stakeholders in the debate about the future of our foods in the spheres of academic, industrial, and government policy.
Download or read book Handbook of Bionanocomposites written by Shakeel Ahmed and published by CRC Press. This book was released on 2018-08-06 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced bionanocomposite materials continue to be increasingly popular and are important for a wide range of scientific and engineering applications. In the race to exploit the unique mechanical, thermal, and electrical properties of bionanocomposite materials, researchers need to address new challenges in predicting, understanding, and managing the potentially adverse effects these materials could have on the environment and human life. This book focuses on the fundamentals of bionanostructured materials and bionanocomposites. It deals with some recent developments in the synthesis and characterization of bionanomaterials as well as their incorporation into polymer matrixes. The biological applications of bionanomaterials are also discussed in detail, along with the synthesis of bionanostructured materials and bionanocomposites, reviews of food packing, water remediation, heavy metal ion adsorption from wastewaters, and other industrial applications. This book is aimed at beginners in this field as well as advanced undergraduate- and graduate-level students of materials science and researchers working in the fields of bionanocomposites, nanotechnology, and analytical chemistry, especially those with an interest in materials for analytical applications.