Download or read book Advances in Transport Processes written by A.S. Mujumdar and published by Elsevier. This book was released on 2013-10-22 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject matter covered in this volume covers a wide scope. It contains critical reviews in many frontier areas of interest to engineers and applied scientists. Multiphase transport ranging from floc breakage to flow through multiphase media is discussed. Difficult problems of bubble growth and devolatilisation from polymeric melts are treated. The question of solid-liquid phase change with flow is considered and the emerging quantitation of web drying technology through mathematical modeling is covered. Transport phenomena in high-tech materials ranging from zeolite catalysts to liquid crystalline materials are covered and formidable problems of transport of gases in porous media, which have implications in many different technologies, are also addressed. Finally, applications of newer techniques in numerical computation of transport processes are highlighted. These authorative, evaluative and timely reviews of topics of current and potential interest will serve the needs of practising engineers as well as academic and industrial researchers.

Download or read book Advanced Transport Phenomena written by L. Gary Leal and published by Cambridge University Press. This book was released on 2007-06-18 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Transport Phenomena is ideal as a graduate textbook. It contains a detailed discussion of modern analytic methods for the solution of fluid mechanics and heat and mass transfer problems, focusing on approximations based on scaling and asymptotic methods, beginning with the derivation of basic equations and boundary conditions and concluding with linear stability theory. Also covered are unidirectional flows, lubrication and thin-film theory, creeping flows, boundary layer theory, and convective heat and mass transport at high and low Reynolds numbers. The emphasis is on basic physics, scaling and nondimensionalization, and approximations that can be used to obtain solutions that are due either to geometric simplifications, or large or small values of dimensionless parameters. The author emphasizes setting up problems and extracting as much information as possible short of obtaining detailed solutions of differential equations. The book also focuses on the solutions of representative problems. This reflects the book's goal of teaching readers to think about the solution of transport problems.

Download or read book Advances in Transport Processes IX written by Arun S. Mujumdar and published by Elsevier Science & Technology. This book was released on 1993 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject matter covered in this volume covers a wide scope. It contains critical reviews in many frontier areas of interest to engineers and applied scientists. Multiphase transport ranging from floc breakage to flow through multiphase media is discussed. Difficult problems of bubble growth and devolatilisation from polymeric melts are treated. The question of solid-liquid phase change with flow is considered and the emerging quantitation of web drying technology through mathematical modeling is covered. Transport phenomena in high-tech materials ranging from zeolite catalysts to liquid crystalline materials are covered and formidable problems of transport of gases in porous media, which have implications in many different technologies, are also addressed. Finally, applications of newer techniques in numerical computation of transport processes are highlighted.These authorative, evaluative and timely reviews of topics of current and potential interest will serve the needs of practising engineers as well as academic and industrial researchers.

Download or read book Advances in Transport Processes written by A. S. Mujumdar and published by Halsted Press. This book was released on 1981-01 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Transport Processes and Separation Technologies written by J.M.P.Q. Delgado and published by Springer Nature. This book was released on 2020-07-07 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent research in the field of transport phenomena in porous materials, including heat and mass transfer, drying and adsorption. Covering a comprehensive range of topics related to the transport phenomenon in engineering (including state-of-the-art, theory and technological applications), it discusses some of the most important theoretical advances, computational developments and applications in porous materials domain. Providing an update on the current state of knowledge, this self-contained reference resource will appeal to scientists, researchers and engineers in a variety of disciplines, such as chemical, civil, agricultural and mechanical engineering.

Download or read book Advances in Transport Processes written by Arun S. Mujumdar and published by Elsevier Science Limited. This book was released on 1993 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject matter covered in this volume covers a wide scope. It contains critical reviews in many frontier areas of interest to engineers and applied scientists. Multiphase transport ranging from floc breakage to flow through multiphase media is discussed. Difficult problems of bubble growth and devolatilisation from polymeric melts are treated. The question of solid-liquid phase change with flow is considered and the emerging quantitation of web drying technology through mathematical modeling is covered. Transport phenomena in high-tech materials ranging from zeolite catalysts to liquid crystalline materials are covered and formidable problems of transport of gases in porous media, which have implications in many different technologies, are also addressed. Finally, applications of newer techniques in numerical computation of transport processes are highlighted.These authorative, evaluative and timely reviews of topics of current and potential interest will serve the needs of practising engineers as well as academic and industrial researchers.

Download or read book Standard Transport Appraisal Methods written by and published by Academic Press. This book was released on 2020-11-04 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Standard Transport Appraisal Methods, Volume 6 in the Advances in Transport Policy and Planning series, assesses both successful and unsuccessful practices and policies from around the world. Chapters in this new release include Transport models, Cost-Benefit Analysis, Value of Travel Time Savings and reliability, Value of Statistical Life, Wider economic benefits, Multi-criteria analysis, Best-Worst Method, Participatory Value Evaluation, Ex-post evaluation, Sustainability assessment, Evaluating Transport Equity, Environmental Impact Assessment, Decision-Support Systems, Deliberative appraisal methods, Critique on appraisal methods, Appraisal methods in developing countries, Research agenda for appraisal methods, and much more. - Provides the authority and expertise of leading contributors from an international board of authors - Presents the latest release in the Advances in Transport Policy and Planning series

Download or read book Advances in Transport Processes written by and published by . This book was released on 1980 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Transport Processes in Porous Media written by Frank A. Coutelieris and published by Springer Science & Business Media. This book was released on 2012-01-25 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of this book is to study the porous media and the transport processes occur there. As a first step, the authors discuss several techniques for artificial representation of porous. Afterwards, they describe the single and multi phase flows in simplistic and complex porous structures in terms of macroscopic and microscopic equations as well as of their analytical and numerical solutions. Furthermore, macroscopic quantities such as permeability are introduced and reviewed. The book also discusses with mass transport processes in the porous media which are further strengthen by experimental validation and specific technological applications. This book makes use of state-of-the-art techniques for the modeling of transport processes in porous structures, and considers of realistic sorption mechanisms. It the applies advanced mathematical techniques for upscaling of the major quantities, and presents the experimental investigation and application, namely, experimental methods for the measurement of relevant transport properties. The main benefit of the book is that it discusses all the topics related to transport in porous media (including state-of-the-art applications) and presents some of the most important theoretical, numerical and experimental developments in porous media domain, providing a self-contained major reference that is appealing to both the scientists and the engineers. At the same time, these topics encounter a variety of scientific and engineering disciplines, such as chemical, civil, agricultural, mechanical engineering. The book is divided in several chapters that intend to be a resume of the current state of knowledge for benefit of related professionals and scientists.

Download or read book Advances in Transport Phenomena in Porous Media written by Jacob Bear and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1018 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the lectures presented at the NATO ADVANCED STUDY INSTITUTE that took place at Newark, Delaware, U. S. A. , July 14-23, 1985. The objective of this meeting was to present and discuss selected topics associated with transport phenomena in porous media. By their very nature, porous media and phenomena of transport of extensive quantities that take place in them, are very complex. The solid matrix may be rigid, or deformable (elastically, or following some other constitutive relation), the void space may be occupied by one or more fluid phases. Each fluid phase may be composed of more than one component, with the various components capable of interacting among themselves and/or with the solid matrix. The transport process may be isothermal or non-isothermal, with or without phase changes. Porous medium domains in which extensive quantities, such as mass of a fluid phase, component of a fluid phase, or heat of the porous medium as a whole, are being transported occur in the practice in a variety of disciplines.

Download or read book Advances in Transport Processes written by and published by . This book was released on 1980 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Transport Processes in Chemically Reacting Flow Systems written by Daniel E. Rosner and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transport Processes in Chemically Reacting Flow Systems discusses the role, in chemically reacting flow systems, of transport processes—particularly the transport of momentum, energy, and (chemical species) mass in fluids (gases and liquids). The principles developed and often illustrated here for combustion systems are important not only for the rational design and development of engineering equipment (e.g., chemical reactors, heat exchangers, mass exchangers) but also for scientific research involving coupled transport processes and chemical reaction in flow systems. The book begins with an introduction to transport processes in chemically reactive systems. Separate chapters cover momentum, energy, and mass transport. These chapters develop, state, and exploit useful quantitative ""analogies"" between these transport phenomena, including interrelationships that remain valid even in the presence of homogeneous or heterogeneous chemical reactions. A separate chapter covers the use of transport theory in the systematization and generalization of experimental data on chemically reacting systems. The principles and methods discussed are then applied to the preliminary design of a heat exchanger for extracting power from the products of combustion in a stationary (fossil-fuel-fired) power plant. The book has been written in such a way as to be accessible to students and practicing scientists whose background has until now been confined to physical chemistry, classical physics, and/or applied mathematics.

Download or read book Transport Processes at Fluidic Interfaces written by Dieter Bothe and published by Birkhäuser. This book was released on 2017-07-13 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are several physico-chemical processes that determine the behavior of multiphase fluid systems – e.g., the fluid dynamics in the different phases and the dynamics of the interface(s), mass transport between the fluids, adsorption effects at the interface, and transport of surfactants on the interface – and result in heterogeneous interface properties. In general, these processes are strongly coupled and local properties of the interface play a crucial role. A thorough understanding of the behavior of such complex flow problems must be based on physically sound mathematical models, which especially account for the local processes at the interface. This book presents recent findings on the rigorous derivation and mathematical analysis of such models and on the development of numerical methods for direct numerical simulations. Validation results are based on specifically designed experiments using high-resolution experimental techniques. A special feature of this book is its focus on an interdisciplinary research approach combining Applied Analysis, Numerical Mathematics, Interface Physics and Chemistry, as well as relevant research areas in the Engineering Sciences. The contributions originated from the joint interdisciplinary research projects in the DFG Priority Programme SPP 1506 “Transport Processes at Fluidic Interfaces.”

Download or read book Environmental Transport Processes written by Bruce E. Logan and published by John Wiley & Sons. This book was released on 2012-03-20 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique approach to the challenges of complex environmental systems Environmental Transport Processes, Second Edition provides much-needed guidance on mass transfer principles in environmental engineering. It focuses on working with uncontrolled conditions involving biological and physical systems, offering examples from diverse fields, including mass transport, kinetics, wastewater treatment, and unit processes. This new edition is fully revised and updated, incorporating modern approaches and practice problems at the end of chapters, making the Second Edition more concise, accessible, and easy to use. The book discusses the fundamentals of transport processes occurring in natural environments, with special emphasis on working at the biological physical interface. It considers transport and kinetics in terms of systems that involve microorganisms, along with in-depth coverage of particles, size spectra, and calculations for particles that can be considered either spheres or fractals. The book's treatment of particles as fractals is especially unique and the Second Edition includes a new section on exoelectrogenic biofilms. It also addresses dispersion in natural and engineered systems unlike any other book on the subject. Readers will learn to tackle with confidence complex environmental systems and make transport calculations in heterogeneous environments with mixtures of chemicals.

Download or read book Advanced Transport Phenomena written by John C. Slattery and published by Cambridge University Press. This book was released on 1999-07-13 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: The term 'transport phenomena' describes the fundamental processes of momentum, energy, and mass transfer. This text provides a thorough discussion of transport phenomena, laying the foundation for understanding a wide variety of operations used by chemical engineers. The book is arranged in three parallel parts covering the major topics of momentum, energy, and mass transfer. Each part begins with the theory, followed by illustrations of the way the theory can be used to obtain fairly complete solutions, and concludes with the four most common types of averaging used to obtain approximate solutions. A broad range of technologically important examples, as well as numerous exercises, are provided throughout the text. Based on the author's extensive teaching experience, a suggested lecture outline is also included. This book is intended for first-year graduate engineering students; it will be an equally useful reference for researchers in this field.

Download or read book ADVANCES IN TRANSPORT PROCESSES VOL 4 written by Arun S. Mujumdar and published by . This book was released on 1986-07 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: The prime objective of this serial publication is to present authoritative and evaluate reviews of both fundamental and applied topics in heat, mass and momentum transport. The subject matter covered by this serial is truly interdisciplinary and it is expected that it will serve the needs of engineers and physical scientists engaged in research, development and/or design in various engineering disciplines and diverse industries.

Download or read book Advances in Transport Processes in Metallurgical Systems written by Yogeshwar Sahai and published by Elsevier Publishing Company. This book was released on 1992 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises eight chapters covering the principal topics of basic and applied research on transport phenomena in metallurgical refining and production systems. Each chapter contains a comprehensive review of the international literature, a thorough analysis of major innovations, and critical discussions of controversial issues at the forefront of developments in transport phenomena. Basic concepts and fundamentals are emphasized and illustrated by examples from industry. This is particularly true in the chapters devoted to high-temperature processes, metal flow and flow-control systems, injection of reactive materials into melts, refractories and melt interaction, design of continuous-casting systems, and electrometallurgical processing. Scientists and engineers engaged in research and development for the metallurgical industries will find this book invaluable. The text is sufficiently fundamental to serve as a textbook for a graduate course in Process Metallurgy or as an important reference work for researchers.