Download or read book Advances in Thermoelectricity Foundational Issues Materials and Nanotechnology written by D. Narducci and published by IOS Press. This book was released on 2021-06-22 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of thermoelectricity has continued to develop rapidly in recent years and remains one of the most exciting areas of research for a materials physicist. The need for sustainable energy has added a technological momentum to the challenge of devising materials with exceptional properties such as low thermal conductivity, high electrical conductivity and a large Seebeck coefficient, and has triggered a global, interdisciplinary effort. More recently, research on thermoelectric materials has promoted and motivated a major research endeavor to clarify the factors affecting thermal conductivity in nanostructures as part of a more general effort to apply nanotechnology to enhance the performance of thermoelectric materials for use in thermoelectric generators and coolers. This book contains the lectures presented as Course 207 of the International School of Physics Enrico Fermi, Advances in Thermoelectricity: Foundational Issues, Materials, and Nanotechnology, held in Varenna, Italy from 15 – 20 July 2019. This comprehensive course aimed to provide students with a modern vision of the physics of thermoelectric phenomena, starting from the thermodynamics of thermoelectricity and from the physics of transport processes and demonstrating how material structure and nanostructure, together with defects, have been used to tailor the physical properties of advanced thermoelectrics. Special attention was also given to areas of current research – from spin-caloritronics to charge transport in polymers – and to a selected number of applications for heat recovery. Encompassing the full complexity of modern thermoelectricity and covering the most cogent themes relevant to current research, the book will be of interest to all those working in the field.

Download or read book 200 Years of Thermoelectricity written by Lukʹi︠a︡n Ivanovich Anatychuk and published by Springer Nature. This book was released on 2024 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive collection of the most influential papers on thermoelectricity published in the last two centuries. Starting with the pioneering work of Volta, Seebeck, and Peltier on thermoelectric phenomena, it takes the reader through a historical journey of articles and books that have shaped the field of thermoelectricity, covering topics ranging from fundamental physics to novel materials. The book is annotated by a team of distinguished researchers from around the world and includes English translations of the earliest research reports on thermoelectricity, many of which have never been made available before. This provides a unique opportunity to explore the scientific evolution of this groundbreaking discipline. Whether you are a seasoned expert or a newcomer to the field, this book is an invaluable resource for understanding the rich history and current state of thermoelectricity research.

Download or read book Materials Research to Meet 21st Century Defense Needs written by National Research Council and published by National Academies Press. This book was released on 2003-03-25 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to achieve the revolutionary new defense capabilities offered by materials science and engineering, innovative management to reduce the risks associated with translating research results will be needed along with the R&D. While payoff is expected to be high from the promising areas of materials research, many of the benefits are likely to be evolutionary. Nevertheless, failure to invest in more speculative areas of research could lead to undesired technological surprises. Basic research in physics, chemistry, biology, and materials science will provide the seeds for potentially revolutionary technologies later in the 21st century.

Download or read book Nanotechnology Research Directions IWGN Workshop Report written by R.S. Williams and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: energy production, environmental management, transportation, communication, computation, and education. As the twenty-first century unfolds, nanotechnology's impact on the health, wealth, and security of the world's people is expected to be at least as significant as the combined influences in this century of antibiotics, the integrated circuit, and human-made polymers. Dr. Neal Lane, Advisor to the President for Science and Technology and former National Science Foundation (NSF) director, stated at a Congressional hearing in April 1998, "If I were asked for an area of science and engineering that will most likely produce the breakthroughs of tomorrow, I would point to nanoscale science and engineering. " Recognizing this potential, the White House Office of Science and Technology Policy (OSTP) and the Office of Management and Budget (OMB) have issued a joint memorandum to Federal agency heads that identifies nanotechnology as a research priority area for Federal investment in fiscal year 2001. This report charts "Nanotechnology Research Directions," as developed by the Interagency W orking Group on Nano Science, Engineering, and Technology (IWGN) of the National Science and Technology Council (NSTC). The report incorporates the views of leading experts from government, academia, and the private sector. It reflects the consensus reached at an IWGN-sponsored workshop held on January 27-29, 1999, and detailed in contributions submitted thereafter by members of the V. S. science and engineering community. (See Appendix A for a list of contributors.

Download or read book Fundamentals of Nanotechnology written by Gabor L. Hornyak and published by CRC Press. This book was released on 2018-12-14 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: WINNER 2009 CHOICE AWARD OUTSTANDING ACADEMIC TITLE! Nanotechnology is no longer a subdiscipline of chemistry, engineering, or any other field. It represents the convergence of many fields, and therefore demands a new paradigm for teaching. This textbook is for the next generation of nanotechnologists. It surveys the field’s broad landscape, exploring the physical basics such as nanorheology, nanofluidics, and nanomechanics as well as industrial concerns such as manufacturing, reliability, and safety. The authors then explore the vast range of nanomaterials and systematically outline devices and applications in various industrial sectors. This color text is an ideal companion to Introduction to Nanoscience by the same group of esteemed authors. Both titles are also available as the single volume Introduction to Nanoscience and Nanotechnology Qualifying instructors who purchase either of these volumes (or the combined set) are given online access to a wealth of instructional materials. These include detailed lecture notes, review summaries, slides, exercises, and more. The authors provide enough material for both one- and two-semester courses.

Download or read book Thermoelectricity Abstracts written by and published by . This book was released on 1960 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hands On Mathematics for Deep Learning written by Jay Dawani and published by Packt Publishing Ltd. This book was released on 2020-06-12 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to getting well-versed with the mathematical techniques for building modern deep learning architectures Key FeaturesUnderstand linear algebra, calculus, gradient algorithms, and other concepts essential for training deep neural networksLearn the mathematical concepts needed to understand how deep learning models functionUse deep learning for solving problems related to vision, image, text, and sequence applicationsBook Description Most programmers and data scientists struggle with mathematics, having either overlooked or forgotten core mathematical concepts. This book uses Python libraries to help you understand the math required to build deep learning (DL) models. You'll begin by learning about core mathematical and modern computational techniques used to design and implement DL algorithms. This book will cover essential topics, such as linear algebra, eigenvalues and eigenvectors, the singular value decomposition concept, and gradient algorithms, to help you understand how to train deep neural networks. Later chapters focus on important neural networks, such as the linear neural network and multilayer perceptrons, with a primary focus on helping you learn how each model works. As you advance, you will delve into the math used for regularization, multi-layered DL, forward propagation, optimization, and backpropagation techniques to understand what it takes to build full-fledged DL models. Finally, you’ll explore CNN, recurrent neural network (RNN), and GAN models and their application. By the end of this book, you'll have built a strong foundation in neural networks and DL mathematical concepts, which will help you to confidently research and build custom models in DL. What you will learnUnderstand the key mathematical concepts for building neural network modelsDiscover core multivariable calculus conceptsImprove the performance of deep learning models using optimization techniquesCover optimization algorithms, from basic stochastic gradient descent (SGD) to the advanced Adam optimizerUnderstand computational graphs and their importance in DLExplore the backpropagation algorithm to reduce output errorCover DL algorithms such as convolutional neural networks (CNNs), sequence models, and generative adversarial networks (GANs)Who this book is for This book is for data scientists, machine learning developers, aspiring deep learning developers, or anyone who wants to understand the foundation of deep learning by learning the math behind it. Working knowledge of the Python programming language and machine learning basics is required.

Download or read book New Frontiers for Metrology From Biology and Chemistry to Quantum and Data Science written by M.J.T. Milton and published by IOS Press. This book was released on 2021-12-22 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of standard and reliable measurements is essential in many areas of life, but nowhere is it of more crucial importance than in the world of science, and physics in particular. This book contains 20 contributions presented as part of Course 206 of the International School of Physics Enrico Fermi on New Frontiers for Metrology: From Biology and Chemistry to Quantum and Data Science, held in Varenna, Italy, from 4 -13 July 2019. The Course was the 7th in the Enrico Fermi series devoted to metrology, and followed a milestone in the history of measurement: the adoption of new definitions for the base units of the SI. During the Course, participants reviewed the decision and discussed how the new foundation for metrology is opening new possibilities for physics, with several of the lecturers reflecting on the implications for an easier exploration of the unification of quantum mechanics and gravity. A wide range of other topics were covered, from measuring color and appearance to atomic weights and radiation, and including the application of metrological principles to the management and interpretation of very large sets of scientific data and the application of metrology to biology. The book also contains a selection of posters from the best of those presented by students at the Course. Offering a fascinating exploration of the latest thinking on the subject of metrology, this book will be of interest to researchers and practitioners from many fields.

Download or read book Introduction to Nanofiber Materials written by Frank K. Ko and published by Cambridge University Press. This book was released on 2014-07-31 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting the latest coverage of the fundamentals and applications of nanofibrous materials and their structures for graduate students and researchers, this book bridges the communication gap between fiber technologists and materials scientists and engineers. Featuring intensive coverage of electroactive, bioactive and structural nanofibers, it provides a comprehensive collection of processing conditions for electrospinning and includes recent advances in nanoparticle-/nanotube-based nanofibers. The book also covers mechanical properties of fibers and fibrous assemblies, as well as characterization methods.

Download or read book Thermoelectrics written by N. M. Ravindra and published by Springer. This book was released on 2018-08-29 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a concise but comprehensive introduction to the fundamentals and current state of the art in thermoelectrics. Addressing an audience of materials scientists and engineers, the book covers theory, materials selection, and applications, with a wide variety of case studies reflecting the most up-to-date research approaches from the past decade, from single crystal to polycrystalline form and from bulk to thin films to nano dimensions. The world is facing major challenges for finding alternate energy sources that can satisfy the increasing demand for energy consumption while preserving the environment. The field of thermoelectrics has long been recognized as a potential and ideal source of clean energy. However, the relatively low conversion efficiency of thermoelectric devices has prevented their utility on a large scale. While addressing the need for thermal management in materials, device components, and systems, thermoelectrics provides a fundamental solution to waste heat recovery and temperature control. This book summarizes the global efforts that have been made to enhance the figure of merit of various thermoelectric materials by choosing appropriate processes and their influence on properties and performance. Because of these advances, today, thermoelectric devices are found in mainstream applications such as automobiles and power generators, as opposed to just a few years ago when they could only be used in niche applications such as in aeronautics, infrared imaging, and space. However, the continued gap between fundamental theoretical results and actual experimental data of figure of merit and performance continues to challenge the commercial applications of thermoelectrics. This book presents both recent achievements and continuing challenges, and represents essential reading for researchers working in this area in universities, industry, and national labs.

Download or read book Topological Insulators written by Gregory Tkachov and published by CRC Press. This book was released on 2015-10-14 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the result of dynamic developments that have occurred in condensed matter physics after the recent discovery of a new class of electronic materials: topological insulators. A topological insulator is a material that behaves as a band insulator in its interior, while acting as a metallic conductor at its surface. The surface current car

Download or read book An Assessment of ARPA E written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2017-08-03 with total page 45 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 2005, the National Research Council report Rising Above the Gathering Storm recommended a new way for the federal government to spur technological breakthroughs in the energy sector. It recommended the creation of a new agency, the Advanced Research Projects Agency-Energy, or ARPA-E, as an adaptation of the Defense Advanced Research Projects Agency (DARPA) modelâ€"widely considered a successful experiment that has funded out-of-the-box, transformative research and engineering that made possible the Internet, GPS, and stealth aircraft. This new agency was envisioned as a means of tackling the nation's energy challenges in a way that could translate basic research into technological breakthroughs while also addressing economic, environmental, and security issues. Congress authorized ARPA-E in the 2007 America COMPETES Act and requested an early assessment following 6 years of operation to examine the agency's progress toward achieving its statutory mission and goals. This publication summarizes the results of that assessment.

Download or read book Science and the City written by Laurie Winkless and published by Bloomsbury Publishing. This book was released on 2016-08-11 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cities are a big deal. More people now live in them than don't, and with a growing world population, the urban jungle is only going to get busier in the coming decades. But how often do we stop to think about what makes our cities work? Cities are built using some of the most creative and revolutionary science and engineering ideas – from steel structures that scrape the sky to glass cables that help us communicate at the speed of light – but most of us are too busy to notice. Science and the City is your guidebook to that hidden world, helping you to uncover some of the remarkable technologies that keep the world's great metropolises moving. Laurie Winkless takes us around cities in six continents to find out how they're dealing with the challenges of feeding, housing, powering and connecting more people than ever before. In this book, you'll meet urban pioneers from history, along with today's experts in everything from roads to time, and you will uncover the vital role science has played in shaping the city around you. But more than that, by exploring cutting-edge research from labs across the world, you'll build your own vision of the megacity of tomorrow, based on science fact rather than science fiction. Science and the City is the perfect read for anyone curious about the world they live in.

Download or read book Carbon Nanotube Reinforced Polymers written by Roham Rafiee and published by Elsevier. This book was released on 2017-10-06 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotube-Reinforced Polymers: From Nanoscale to Macroscale addresses the advances in nanotechnology that have led to the development of a new class of composite materials known as CNT-reinforced polymers. The low density and high aspect ratio, together with their exceptional mechanical, electrical and thermal properties, render carbon nanotubes as a good reinforcing agent for composites. In addition, these simulation and modeling techniques play a significant role in characterizing their properties and understanding their mechanical behavior, and are thus discussed and demonstrated in this comprehensive book that presents the state-of-the-art research in the field of modeling, characterization and processing. The book separates the theoretical studies on the mechanical properties of CNTs and their composites into atomistic modeling and continuum mechanics-based approaches, including both analytical and numerical ones, along with multi-scale modeling techniques. Different efforts have been done in this field to address the mechanical behavior of isolated CNTs and their composites by numerous researchers, signaling that this area of study is ongoing. - Explains modeling approaches to carbon nanotubes, together with their application, strengths and limitations - Outlines the properties of different carbon nanotube-based composites, exploring how they are used in the mechanical and structural components - Analyzes the behavior of carbon nanotube-based composites in different conditions

Download or read book Introduction to Materials for Advanced Energy Systems written by Colin Tong and published by Springer. This book was released on 2018-12-12 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first of its kind text enables today’s students to understand current and future energy challenges, to acquire skills for selecting and using materials and manufacturing processes in the design of energy systems, and to develop a cross-functional approach to materials, mechanics, electronics and processes of energy production. While taking economic and regulatory aspects into account, this textbook provides a comprehensive introduction to the range of materials used for advanced energy systems, including fossil, nuclear, solar, bio, wind, geothermal, ocean and hydropower, hydrogen, and nuclear, as well as thermal energy storage and electrochemical storage in fuel cells. A separate chapter is devoted to emerging energy harvesting systems. Integrated coverage includes the application of scientific and engineering principles to materials that enable different types of energy systems. Properties, performance, modeling, fabrication, characterization and application of structural, functional and hybrid materials are described for each energy system. Readers will appreciate the complex relationships among materials selection, optimizing design, and component operating conditions in each energy system. Research and development trends of novel emerging materials for future hybrid energy systems are also considered. Each chapter is basically a self-contained unit, easily enabling instructors to adapt the book for coursework. This textbook is suitable for students in science and engineering who seek to obtain a comprehensive understanding of different energy processes, and how materials enable energy harvesting, conversion, and storage. In setting forth the latest advances and new frontiers of research, the text also serves as a comprehensive reference on energy materials for experienced materials scientists, engineers, and physicists. Includes pedagogical features such as in-depth side bars, worked-out and end-of- chapter exercises, and many references to further reading Provides comprehensive coverage of materials-based solutions for major and emerging energy systems Brings together diverse subject matter by integrating theory with engaging insights

Download or read book Foundations of Quantum Theory written by E.M. Rasel and published by IOS Press. This book was released on 2019-01-23 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides a summary of the lectures presented at the International School of Physics "Enrico Fermi" on the Foundations of Quantum Theory, organized by the Italian Physical Society in Varenna, Italy from 8-13 July 2016, in collaboration with the Wilhelm und Else Heraeus-Stiftung. It was the first "Enrico Fermi" Summer School on this topic since 1977. Its main goal was to provide an overview of the recent theoretical and experimental developments in an active field of research, the foundations of quantum mechanics. The field is characterized by a dichotomy of unparalleled agreement between theory and experiment on the one hand, and an enormous variety of interpretations of the underlying mathematical formalism on the other hand. This proceedings of the "Enrico Fermi" Summer School of July 2016 contains 21 contributions on a range of topics: the history and interpretations of quantum theory; the principle of complementarity and wave-particle duality; quantum theory from first principles; the reality of the wave function; the concept of the photon; measurement in quantum theory; the interface of quantum theory and general relativity; and quantum optical tests of quantum theory.

Download or read book Understanding the Global Energy Crisis written by Richard A. Simmons and published by Purdue University Press. This book was released on 2014-03-15 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: We are facing a global energy crisis caused by world population growth, an escalating increase in demand, and continued dependence on fossil-based fuels for generation. It is widely accepted that increases in greenhouse gas concentration levels, if not reversed, will result in major changes to world climate with consequential effects on our society and economy. This is just the kind of intractable problem that Purdue University's Global Policy Research Institute seeks to address in the Purdue Studies in Public Policy series by promoting the engagement between policy makers and experts in fields such as engineering and technology. Major steps forward in the development and use of technology are required. In order to achieve solutions of the required scale and magnitude within a limited timeline, it is essential that engineers be not only technologically-adept but also aware of the wider social and political issues that policy-makers face. Likewise, it is also imperative that policy makers liaise closely with the academic community in order to realize advances. This book is designed to bridge the gap between these two groups, with a particular emphasis on educating the socially-conscious engineers and technologists of the future. In this accessibly-written volume, central issues in global energy are discussed through interdisciplinary dialogue between experts from both North America and Europe. The first section provides an overview of the nature of the global energy crisis approached from historical, political, and sociocultural perspectives. In the second section, expert contributors outline the technology and policy issues facing the development of major conventional and renewable energy sources. The third and final section explores policy and technology challenges and opportunities in the distribution and consumption of energy, in sectors such as transportation and the built environment. The book's epilogue suggests some future scenarios in energy distribution and use.