Download or read book Advances in Steam Turbines for Modern Power Plants written by Tadashi Tanuma and published by Woodhead Publishing. This book was released on 2017-02-15 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Steam Turbines for Modern Power Plants provides an authoritative review of steam turbine design optimization, analysis and measurement, the development of steam turbine blades, and other critical components, including turbine retrofitting and steam turbines for renewable power plants. As a very large proportion of the world's electricity is currently generated in systems driven by steam turbines, (and will most likely remain the case in the future) with steam turbines operating in fossil-fuel, cogeneration, combined cycle, integrated gasification combined cycle, geothermal, solar thermal, and nuclear plants across the world, this book provides a comprehensive assessment of the research and work that has been completed over the past decades. - Presents an in-depth review on steam turbine design optimization, analysis, and measurement - Written by a range of experts in the area - Provides an overview of turbine retrofitting and advanced applications in power generation
Download or read book Power Generation Technologies written by Paul Breeze and published by Elsevier. This book was released on 2005-02-04 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book makes intelligible the wide range of electricity generating technologies available today, as well as some closely allied technologies such as energy storage. The book opens by setting the many power generation technologies in the context of global energy consumption, the development of the electricity generation industry and the economics involved in this sector. A series of chapters are each devoted to assessing the environmental and economic impact of a single technology, including conventional technologies, nuclear and renewable (such as solar, wind and hydropower). The technologies are presented in an easily digestible form.Different power generation technologies have different greenhouse gas emissions and the link between greenhouse gases and global warming is a highly topical environmental and political issue. With developed nations worldwide looking to reduce their emissions of carbon dioxide, it is becoming increasingly important to explore the effectiveness of a mix of energy generation technologies.Power Generation Technologies gives a clear, unbiased review and comparison of the different types of power generation technologies available. In the light of the Kyoto protocol and OSPAR updates, Power Generation Technologies will provide an invaluable reference text for power generation planners, facility managers, consultants, policy makers and economists, as well as students and lecturers of related Engineering courses.· Provides a unique comparison of a wide range of power generation technologies - conventional, nuclear and renewable· Describes the workings and environmental impact of each technology· Evaluates the economic viability of each different power generation system
Download or read book Advances in Steam Turbine Technology for the Power Generation Industry written by William G. Moore and published by . This book was released on 1994 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Steam Turbines for Modern Power Plants written by Tadashi Tanuma and published by Woodhead Publishing. This book was released on 2022-07-15 with total page 681 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Steam Turbines for Modern Power Plants, second edition, provides a fully revised and updated comprehensive review of steam turbine design, optimization, analysis and measurement. Editor Tadashi Tanuma and his team of expert contributors from around the globe have updated each chapter to reflect the latest research and experiences in the field, to help progress thermal power generation to meet sustainability goals. This book presents modern technologies for the design and development of steam turbines that supply affordable, reliable and stable power with much lower CO2 emissions. With the addition of two new chapters on 'Steam turbine mechanical design and analysis for high temperature, large and rapid change of temperature conditions' and 'Steam valves with low pressure losses' this edition will support students, researchers and professional engineers in designing and developing their own economical and environmentally concerned thermal power plants. - Fully updated to include the latest research and examples from around the globe - Includes brand new chapters, case studies, photographs, data, analysis and models - Chapters on the design and development of Steam Turbines are written by experienced design engineers who provide first-hand experience and lessons learned.
Download or read book Advanced Power Generation Systems written by Ibrahim Dincer and published by Academic Press. This book was released on 2014-07-15 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Power Generation Systems examines the full range of advanced multiple output thermodynamic cycles that can enable more sustainable and efficient power production from traditional methods, as well as driving the significant gains available from renewable sources. These advanced cycles can harness the by-products of one power generation effort, such as electricity production, to simultaneously create additional energy outputs, such as heat or refrigeration. Gas turbine-based, and industrial waste heat recovery-based combined, cogeneration, and trigeneration cycles are considered in depth, along with Syngas combustion engines, hybrid SOFC/gas turbine engines, and other thermodynamically efficient and environmentally conscious generation technologies. The uses of solar power, biomass, hydrogen, and fuel cells in advanced power generation are considered, within both hybrid and dedicated systems. The detailed energy and exergy analysis of each type of system provided by globally recognized author Dr. Ibrahim Dincer will inform effective and efficient design choices, while emphasizing the pivotal role of new methodologies and models for performance assessment of existing systems. This unique resource gathers information from thermodynamics, fluid mechanics, heat transfer, and energy system design to provide a single-source guide to solving practical power engineering problems. - The only complete source of info on the whole array of multiple output thermodynamic cycles, covering all the design options for environmentally-conscious combined production of electric power, heat, and refrigeration - Offers crucial instruction on realizing more efficiency in traditional power generation systems, and on implementing renewable technologies, including solar, hydrogen, fuel cells, and biomass - Each cycle description clarified through schematic diagrams, and linked to sustainable development scenarios through detailed energy, exergy, and efficiency analyses - Case studies and examples demonstrate how novel systems and performance assessment methods function in practice
Download or read book Advanced Technologies for Gas Turbines written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2020-04-19 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: Leadership in gas turbine technologies is of continuing importance as the value of gas turbine production is projected to grow substantially by 2030 and beyond. Power generation, aviation, and the oil and gas industries rely on advanced technologies for gas turbines. Market trends including world demographics, energy security and resilience, decarbonization, and customer profiles are rapidly changing and influencing the future of these industries and gas turbine technologies. Technology trends that define the technological environment in which gas turbine research and development will take place are also changing - including inexpensive, large scale computational capabilities, highly autonomous systems, additive manufacturing, and cybersecurity. It is important to evaluate how these changes influence the gas turbine industry and how to manage these changes moving forward. Advanced Technologies for Gas Turbines identifies high-priority opportunities for improving and creating advanced technologies that can be introduced into the design and manufacture of gas turbines to enhance their performance. The goals of this report are to assess the 2030 gas turbine global landscape via analysis of global leadership, market trends, and technology trends that impact gas turbine applications, develop a prioritization process, define high-priority research goals, identify high-priority research areas and topics to achieve the specified goals, and direct future research. Findings and recommendations from this report are important in guiding research within the gas turbine industry and advancing electrical power generation, commercial and military aviation, and oil and gas production.
Download or read book Combined Cycle Systems for Near Zero Emission Power Generation written by Ashok D Rao and published by Elsevier. This book was released on 2012-04-12 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combined cycle power plants are one of the most promising ways of improving fossil-fuel and biomass energy production. The combination of a gas and steam turbine working in tandem to produce power makes this type of plant highly efficient and allows for CO2 capture and sequestration before combustion. This book provides a comprehensive review of the design, engineering and operational issues of a range of advanced combined cycle plants.After introductory chapters on basic combined cycle power plant and advanced gas turbine design, the book reviews the main types of combined cycle system. Chapters discuss the technology, efficiency and emissions performance of natural gas-fired combined cycle (NGCC) and integrated gasification combined cycle (IGCC) as well as novel humid air cycle, oxy-combustion turbine cycle systems. The book also reviews pressurised fluidized bed combustion (PFBC), externally fired combined cycle (EFCC), hybrid fuel cell turbine (FC/GT), combined cycle and integrated solar combined cycle (ISCC) systems. The final chapter reviews techno-economic analysis of combined cycle systems.With its distinguished editor and international team of contributors, Combined cycle systems for near-zero emission power generation is a standard reference for both industry practitioners and academic researchers seeking to improve the efficiency and environmental impact of power plants. - Provides a comprehensive review of the design, engineering and operational issues of a range of advanced combined cycle plants - Introduces basic combined cycle power plant and advanced gas turbine design and reviews the main types of combined cycle systems - Discusses the technology, efficiency and emissions performance of natural gas-fired combined cycle (NGCC) systems and integrated gasification combined cycle (IGCC) systems, as well as novel humid air cycle systems and oxy-combustion turbine cycle systems
Download or read book Advances in Materials Technology for Fossil Power Plants written by Ramaswamy Viswanathan and published by ASM International. This book was released on 2005-01-01 with total page 1399 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas Turbines for Electric Power Generation written by S. Can Gülen and published by Cambridge University Press. This book was released on 2019-02-14 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Everything you wanted to know about industrial gas turbines for electric power generation in one source with hard-to-find, hands-on technical information.
Download or read book Combined cycle Gas Steam Turbine Power Plants written by Rolf Kehlhofer and published by PennWell Books. This book was released on 1999 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title provides a reference on technical and economic factors of combined-cycle applications within the utility and cogeneration markets. Kehlhofer - and hos co-authors give the reader tips on system layout, details on controls and automation, and operating instructions.
Download or read book Coal written by National Research Council and published by National Academies Press. This book was released on 1995-06-13 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Department of Energy (DOE) was given a mandate in the 1992 Energy Policy Act (EPACT) to pursue strategies in coal technology that promote a more competitive economy, a cleaner environment, and increased energy security. Coal evaluates DOE's performance and recommends priorities in updating its coal program and responding to EPACT. This volume provides a picture of likely future coal use and associated technology requirements through the year 2040. Based on near-, mid-, and long-term scenarios, the committee presents a framework for DOE to use in identifying R&D strategies and in making detailed assessments of specific programs. Coal offers an overview of coal-related programs and recent budget trends and explores principal issues in future U.S. and foreign coal use. The volume evaluates DOE Fossil Energy R&D programs in such key areas as electric power generation and conversion of coal to clean fuels. Coal will be important to energy policymakers, executives in the power industry and related trade associations, environmental organizations, and researchers.
Download or read book More Best Practices for Rotating Equipment written by Michael S. Forsthoffer and published by Butterworth-Heinemann. This book was released on 2017-02-06 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: More Best Practices for Rotating Equipment follows Forsthoffer's multi-volume Rotating Equipment Handbooks, addressing the latest best practices in industrial rotating machinery and also including a comprehensive treatment of the basics for reference. The author's famous troubleshooting approach teaches the reader proven methodologies for installation, operation, and maintenance of equipment, and covers all phases of work with rotating equipment. Reliability optimization is also addressed for the first time. The book is ideal for engineers working in the design, installation, operation, and maintenance of power machinery. It is also an essential source of information for postgraduate students and researchers of mechanical and industrial engineering. - Presents 200 new best practices for rotating equipment - Offers an easy-to-use reference, with each chapter addressing a different type of equipment - Covers all phases of work with rotating equipment, from pre-commissioning through maintenance
Download or read book Materials for Ultra Supercritical and Advanced Ultra Supercritical Power Plants written by Augusto Di Gianfrancesco and published by Woodhead Publishing. This book was released on 2016-09-01 with total page 902 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Ultra-Supercritical and Advanced Ultra-Supercritical Power Plants provides researchers in academia and industry with an essential overview of the stronger high-temperature materials required for key process components, such as membrane wall tubes, high-pressure steam piping and headers, superheater tubes, forged rotors, cast components, and bolting and blading for steam turbines in USC power plants. Advanced materials for future advanced ultra-supercritical power plants, such as superalloys, new martensitic and austenitic steels, are also addressed. Chapters on international research directions complete the volume. The transition from conventional subcritical to supercritical thermal power plants greatly increased power generation efficiency. Now the introductions of the ultra-supercritical (USC) and, in the near future, advanced ultra-supercritical (A-USC) designs are further efforts to reduce fossil fuel consumption in power plants and the associated carbon dioxide emissions. The higher operating temperatures and pressures found in these new plant types, however, necessitate the use of advanced materials. - Provides researchers in academia and industry with an authoritative and systematic overview of the stronger high-temperature materials required for both ultra-supercritical and advanced ultra-supercritical power plants - Covers materials for critical components in ultra-supercritical power plants, such as boilers, rotors, and turbine blades - Addresses advanced materials for future advanced ultra-supercritical power plants, such as superalloys, new martensitic and austenitic steels - Includes chapters on technologies for welding technologies
Download or read book Thermal Power Plants written by Paweł Madejski and published by BoD – Books on Demand. This book was released on 2018-05-02 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demand for electricity and heat production is still largely covered by conventional thermal power plants based on fossil fuel combustion. Thermal power stations face a big challenge to meet the environmental requirements constantly keeping high process efficiency and avoiding lifetime shortening of critical components. In recent years, many activities have been observed to reduce pollutant emissions and optimize performance in thermal power plants. Increased share of renewable sources of energy in domestic markets enforces flexible operation and fast adjustment to actual demand. Gas power plants start to play a very important role in this process, allowing for rapid change of load and emission reduction. Operation under changing load together with keeping emissions at the accurate level requires constantly introducing new solutions and technologies as well as carrying out many research and development activities for optimization of the electricity and heat production process. The edited book is aimed to present new technologies, innovative solutions, measurement techniques, tools and computational methods dedicated to thermal power plants in the light of new trends and challenges.
Download or read book Steam Turbines for Modern Fossil Fuel Power Plants written by Alexander S. Leyzerovich and published by CRC Press. This book was released on 2021-01-18 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting the newest approaches to the design and operation of steam turbines, this book also explores modern techniques for refurbishment of aging units. It covers recent engineering breakthroughs and new approaches to transient operating conditions, as well as improved information support for operational personnel. An authoritative guide for power plant engineers, operators, owners and designers on all of these crucial developments, this book fully describes and evaluates the most important new design and operational improvement opportunities for the full spectrum of today's steam turbines – from the newest and most advanced to the more common existing systems.
Download or read book Advances in Wind Power written by Rupp Carriveau and published by BoD – Books on Demand. This book was released on 2012-11-21 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's wind energy industry is at a crossroads. Global economic instability has threatened or eliminated many financial incentives that have been important to the development of specific markets. Now more than ever, this essential element of the world energy mosaic will require innovative research and strategic collaborations to bolster the industry as it moves forward. This text details topics fundamental to the efficient operation of modern commercial farms and highlights advanced research that will enable next-generation wind energy technologies. The book is organized into three sections, Inflow and Wake Influences on Turbine Performance, Turbine Structural Response, and Power Conversion, Control and Integration. In addition to fundamental concepts, the reader will be exposed to comprehensive treatments of topics like wake dynamics, analysis of complex turbine blades, and power electronics in small-scale wind turbine systems.
Download or read book The Power of Renewables written by Chinese Academy of Engineering and published by National Academies Press. This book was released on 2011-01-29 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: The United States and China are the world's top two energy consumers and, as of 2010, the two largest economies. Consequently, they have a decisive role to play in the world's clean energy future. Both countries are also motivated by related goals, namely diversified energy portfolios, job creation, energy security, and pollution reduction, making renewable energy development an important strategy with wide-ranging implications. Given the size of their energy markets, any substantial progress the two countries make in advancing use of renewable energy will provide global benefits, in terms of enhanced technological understanding, reduced costs through expanded deployment, and reduced greenhouse gas (GHG) emissions relative to conventional generation from fossil fuels. Within this context, the U.S. National Academies, in collaboration with the Chinese Academy of Sciences (CAS) and Chinese Academy of Engineering (CAE), reviewed renewable energy development and deployment in the two countries, to highlight prospects for collaboration across the research to deployment chain and to suggest strategies which would promote more rapid and economical attainment of renewable energy goals. Main findings and concerning renewable resource assessments, technology development, environmental impacts, market infrastructure, among others, are presented. Specific recommendations have been limited to those judged to be most likely to accelerate the pace of deployment, increase cost-competitiveness, or shape the future market for renewable energy. The recommendations presented here are also pragmatic and achievable.
