Download or read book Advances in Solid Mechanics for Design and Analysis written by United States. Army. Materials and Mechanics Research Center and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Fluid Mechanics and Solid Mechanics written by Damodar Maity and published by Springer. This book was released on 2020-03-23 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the 63rd Congress of the Indian Society of Theoretical and Applied Mechanics (ISTAM) held in Bangalore, in December 2018. Latest research in computational, experimental, and applied mechanics is presented in the book. The chapters are broadly classified into two sections - (i) fluid mechanics and (ii) solid mechanics. Each section covers computational and experimental studies on various contemporary topics such as aerospace dynamics and propulsion, atmospheric sciences, boundary layers, compressible flow, environmental fluid dynamics, control structures, fracture and crack, viscoelasticity, and mechanics of composites. The contents of this book will serve as a useful reference to students, researchers, and practitioners interested in the broad field of mechanics.

Download or read book Proceedings of the Army Symposium on Solid Mechanics 1984 written by Army Materials and Mechanics Research Center (U.S.) and published by . This book was released on 1984 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Design of Mechanical Systems From Analysis to Optimization written by Jorge A.C. Ambrosio and published by Springer Science & Business Media. This book was released on 2009-11-25 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multibody systems are used extensively in the investigation of mechanical systems including structural and non-structural applications. It can be argued that among all the areas in solid mechanics the methodologies and applications associated to multibody dynamics are those that provide an ideal framework to aggregate d- ferent disciplines. This idea is clearly reflected, e. g. , in the multidisciplinary applications in biomechanics that use multibody dynamics to describe the motion of the biological entities, in finite elements where multibody dynamics provides - werful tools to describe large motion and kinematic restrictions between system components, in system control where the methodologies used in multibody dynamics are the prime form of describing the systems under analysis, or even in many - plications that involve fluid-structure interaction or aero elasticity. The development of industrial products or the development of analysis tools, using multibody dynamics methodologies, requires that the final result of the devel- ments are the best possible within some limitations, i. e. , they must be optimal. Furthermore, the performance of the developed systems must either be relatively insensitive to some of their design parameters or be sensitive in a controlled manner to other variables. Therefore, the sensitivity analysis of such systems is fundamental to support the decision making process. This book presents a broad range of tools for designing mechanical systems ranging from the kinematic and dynamic analysis of rigid and flexible multibody systems to their advanced optimization.

Download or read book Current Advances in Mechanical Design and Production VII written by M.F. Hassan and published by Elsevier. This book was released on 2000-01-31 with total page 665 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on Mechanical Design and Production has over the years established itself as an excellent forum for the exchange of ideas in these established fields. The first of these conferences was held in 1979. The seventh, and most recent, conference in the series was held in Cairo during February 15-17, 2000. International engineers and scientists gathered to exchange experiences and highlight the state-of-the-art research in the fields of mechanical design and production. In addition a heavy emphasis was placed on the issue of technology transfer. Over 100 papers were accepted for presentation at the conference. Current Advances in Mechanical Design & Production VII does not, however, attempt to publish the complete work presented but instead offers a sample that represents the quality and breadth of both the work and the conference. Ten invited papers and 54 ordinary papers have been selected for inclusion in these proceedings. They cover a range of basic and applied topics that can be classified into six main categories: System Dynamics, Solid Mechanics, Material Science, Manufacturing Processes, Design and Tribology, and Industrial Engineering and its Applications.

Download or read book Proceedings of the Army Symposium on Solid Mechanics Advances in Solid Mechanics for Design and Analysis Held at Newport Rhode Island on 1 3 October 1984 written by ARMY MATERIALS AND MECHANICS RESEARCH CENTER WATERTOWN MA. and published by . This book was released on 1984 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: THE Army Symposium, 1984, was the ninth in a series of biennial meetings sponsored by the Army Materials and Mechanics Research Center (AMMRC), Watertown, Massachusetts. The symposium consisted of various types of presentations; namely, Keynote Themes; Overviews of related federally ponsored research; full technical papers and a series of brief presentations and discussions of current, but not necessarily complete, research. This document contains the technical manuscripts and the abstracts for the various presentations. Some of the sessions pertained to: New Computing Systems and Their Impact on Structural Calculation; Current and Future Developments of Experimental Mechanics; Overviews of Sponsored Research; Experimental Methods; Modeling Special Effects; Analysis, Design and Reliability; Composite Applications - Design Analysis Test and Evaluation; Special Sessions on Composites; Design & Analysis of Projectiles & Munitions; and Solid Mechanics in Penetration Phenomena. Originator - Furnished keywords include: Ballistics; Engineering; Failure (mechanics); Fatigue; Impact; Ordnance; Mechanical properties; Mechanics; Shock.

Download or read book Recent Advances in Computational and Experimental Mechanics Vol I written by D. Maity and published by Springer Nature. This book was released on 2022-01-01 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book (Vol. - I) presents select proceedings of the first Online International Conference on Recent Advances in Computational and Experimental Mechanics (ICRACEM 2020) and focuses on theoretical, computational and experimental aspects of solid and fluid mechanics. Various topics covered are computational modelling of extreme events; mechanical modelling of robots; mechanics and design of cellular materials; mechanics of soft materials; mechanics of thin-film and multi-layer structures; meshfree and particle based formulations in continuum mechanics; multi-scale computations in solid mechanics, and materials; multiscale mechanics of brittle and ductile materials; topology and shape optimization techniques; acoustics including aero-acoustics and wave propagation; aerodynamics; dynamics and control in micro/nano engineering; dynamic instability and buckling; flow-induced noise and vibration; inverse problems in mechanics and system identification; measurement and analysis techniques in nonlinear dynamic systems; multibody dynamical systems and applications; nonlinear dynamics and control; stochastic mechanics; structural dynamics and earthquake engineering; structural health monitoring and damage assessment; turbomachinery noise; vibrations of continuous systems, characterization of advanced materials; damage identification and non-destructive evaluation; experimental fire mechanics and damage; experimental fluid mechanics; experimental solid mechanics; measurement in extreme environments; modal testing and dynamics; experimental hydraulics; mechanism of scour under steady and unsteady flows; vibration measurement and control; bio-inspired materials; constitutive modelling of materials; fracture mechanics; mechanics of adhesion, tribology and wear; mechanics of composite materials; mechanics of multifunctional materials; multiscale modelling of materials; phase transformations in materials; plasticity and creep in materials; fluid mechanics, computational fluid dynamics; fluid-structure interaction; free surface, moving boundary and pipe flow; hydrodynamics; multiphase flows; propulsion; internal flow physics; turbulence modelling; wave mechanics; flow through porous media; shock-boundary layer interactions; sediment transport; wave-structure interaction; reduced-order models; turbo-machinery; experimental hydraulics; mechanism of scour under steady and unsteady flows; applications of machine learning and artificial intelligence in mechanics; transport phenomena and soft computing tools in fluid mechanics. The contents of these two volumes (Volumes I and II) discusses various attributes of modern-age mechanics in various disciplines, such as aerospace, civil, mechanical, ocean engineering and naval architecture. The book will be a valuable reference for beginners, researchers, and professionals interested in solid and fluid mechanics and allied fields.

Download or read book Research Trends in Solid Mechanics written by U.S. National Committee on Theoretical and Applied Mechanics and published by Pergamon. This book was released on 1999 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardbound. Solid mechanics is a basic scientific discipline which provides the theoretical foundation, experimental support, solution methodology and computational tools for analysis, design, construction, manufacture, and behavior prediction in service of many devices, machines, materials, structures and large complex systems that are essential to the existence and progress of an advanced civilization. It is concerned with both manmade, natural and living solid objects, and with all aspects of their physical behavior that affect their function, integrity or service life expectancy.The contents of this volume offer examples of some of the activities that are currently at the forefront of solid mechanics research, and also illustrate the vast reach of the discipline and of its interactions with other science and engineering endeavors.

Download or read book Practical Finite Element Analysis written by Nitin S. Gokhale and published by FINITE TO INFINITE. This book was released on 2008 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highlights of the book: Discussion about all the fields of Computer Aided Engineering, Finite Element Analysis Sharing of worldwide experience by more than 10 working professionals Emphasis on Practical usuage and minimum mathematics Simple language, more than 1000 colour images International quality printing on specially imported paper Why this book has been written ... FEA is gaining popularity day by day & is a sought after dream career for mechanical engineers. Enthusiastic engineers and managers who want to refresh or update the knowledge on FEA are encountered with volume of published books. Often professionals realize that they are not in touch with theoretical concepts as being pre-requisite and find it too mathematical and Hi-Fi. Many a times these books just end up being decoration in their book shelves ... All the authors of this book are from IIT€™s & IISc and after joining the industry realized gap between university education and the practical FEA. Over the years they learned it via interaction with experts from international community, sharing experience with each other and hard route of trial & error method. The basic aim of this book is to share the knowledge & practices used in the industry with experienced and in particular beginners so as to reduce the learning curve & avoid reinvention of the cycle. Emphasis is on simple language, practical usage, minimum mathematics & no pre-requisites. All basic concepts of engineering are included as & where it is required. It is hoped that this book would be helpful to beginners, experienced users, managers, group leaders and as additional reading material for university courses.

Download or read book Recent Advances in Computational and Experimental Mechanics Vol II written by D. K. Maiti and published by Springer Nature. This book was released on 2022-02-26 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book (Vol. II) presents select proceedings of the first Online International Conference on Recent Advances in Computational and Experimental Mechanics (ICRACEM 2020) and focuses on theoretical, computational and experimental aspects of solid and fluid mechanics. Various topics covered are computational modelling of extreme events; mechanical modelling of robots; mechanics and design of cellular materials; mechanics of soft materials; mechanics of thin-film and multi-layer structures; meshfree and particle based formulations in continuum mechanics; multi-scale computations in solid mechanics, and materials; multiscale mechanics of brittle and ductile materials; topology and shape optimization techniques; acoustics including aero-acoustics and wave propagation; aerodynamics; dynamics and control in micro/nano engineering; dynamic instability and buckling; flow-induced noise and vibration; inverse problems in mechanics and system identification; measurement and analysis techniques in nonlinear dynamic systems; multibody dynamical systems and applications; nonlinear dynamics and control; stochastic mechanics; structural dynamics and earthquake engineering; structural health monitoring and damage assessment; turbomachinery noise; vibrations of continuous systems, characterization of advanced materials; damage identification and non-destructive evaluation; experimental fire mechanics and damage; experimental fluid mechanics; experimental solid mechanics; measurement in extreme environments; modal testing and dynamics; experimental hydraulics; mechanism of scour under steady and unsteady flows; vibration measurement and control; bio-inspired materials; constitutive modelling of materials; fracture mechanics; mechanics of adhesion, tribology and wear; mechanics of composite materials; mechanics of multifunctional materials; multiscale modelling of materials; phase transformations in materials; plasticity and creep in materials; fluid mechanics, computational fluid dynamics; fluid-structure interaction; free surface, moving boundary and pipe flow; hydrodynamics; multiphase flows; propulsion; internal flow physics; turbulence modelling; wave mechanics; flow through porous media; shock-boundary layer interactions; sediment transport; wave-structure interaction; reduced-order models; turbo-machinery; experimental hydraulics; mechanism of scour under steady and unsteady flows; applications of machine learning and artificial intelligence in mechanics; transport phenomena and soft computing tools in fluid mechanics. The contents of these two volumes (Volumes I and II) discusses various attributes of modern-age mechanics in various disciplines, such as aerospace, civil, mechanical, ocean engineering and naval architecture. The book will be a valuable reference for beginners, researchers, and professionals interested in solid and fluid mechanics and allied fields.

Download or read book Essentials of Mechanical Stress Analysis written by Amir Javidinejad and published by CRC Press. This book was released on 2023-03-08 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essentials of Mechanical Stress Analysis, updated for the second edition, covers stress analysis from an interdisciplinary perspective. Discussing techniques and theories essential to analysing structures, the book covers both analytical and numerical approaches. The second edition adds new topics and updates research to follow current advances in the field. New sections on material properties, composite materials and finite element analysis enable the reader to further establish the fundamental theory behind material behaviour and the causes of stress and strain. Also covering beams, plates, columns and elastic instability, the book discusses fatigue, life cycle, energy methods and MathCAD sample code. As a clear and comprehensive guide to stress and structural analysis, this book is relevant to students and scholars in the fields of mechanical, aerospace and civil engineering, as well as materials science.

Download or read book Building Information Modeling written by Nawari O. Nawari and published by CRC Press. This book was released on 2015-05-01 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: BIM for Structural Engineering and Architecture Building Information Modeling: Framework for Structural Design outlines one of the most promising new developments in architecture, engineering, and construction (AEC). Building information modeling (BIM) is an information management and analysis technology that is changing the role of computation in the architectural and engineering industries. The innovative process constructs a database assembling all of the objects needed to build a specific structure. Instead of using a computer to produce a series of drawings that together describe the building, BIM creates a single illustration representing the building as a whole. This book highlights the BIM technology and explains how it is redefining the structural analysis and design of building structures. BIM as a Framework Enabler This book introduces a new framework—the structure and architecture synergy framework (SAS framework)—that helps develop and enhance the understanding of the fundamental principles of architectural analysis using BIM tools. Based upon three main components: the structural melody, structural poetry, and structural analysis, along with the BIM tools as the frame enabler, this new framework allows users to explore structural design as an art while also factoring in the principles of engineering. The framework stresses the influence structure can play in form generation and in defining spatial order and composition. By highlighting the interplay between architecture and structure, the book emphasizes the conceptual behaviors of structural systems and their aesthetic implications and enables readers to thoroughly understand the art and science of whole structural system concepts. Presents the use of BIM technology as part of a design process or framework that can lead to a more comprehensive, intelligent, and integrated building design Places special emphasis on the application of BIM technology for exploring the intimate relationship between structural engineering and architectural design Includes a discussion of current and emerging trends in structural engineering practice and the role of the structural engineer in building design using new BIM technologies Building Information Modeling: Framework for Structural Design provides a thorough understanding of architectural structures and introduces a new framework that revolutionizes the way building structures are designed and constructed.

Download or read book Developments and Novel Approaches in Nonlinear Solid Body Mechanics written by Bilen Emek Abali and published by Springer Nature. This book was released on 2020-07-18 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features selected manuscripts presented at ICoNSoM 2019, exploring cutting-edge methods for developing novel models in nonlinear solid mechanics. Innovative methods like additive manufacturing—for example, 3D printing— and miniaturization mean that engineers need more accurate techniques for modeling solid body mechanics. The book focuses on the formulation of continuum and discrete models for complex materials and systems, particularly the design of metamaterials.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Mechanics of Materials and Applied Elasticity written by Ansel C. Ugural and published by Pearson Education. This book was released on 2011-06-21 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: This systematic exploration of real-world stress analysis has been completely updated to reflect state-of-the-art methods and applications now used in aeronautical, civil, and mechanical engineering, and engineering mechanics. Distinguished by its exceptional visual interpretations of solutions, Advanced Mechanics of Materials and Applied Elasticity offers in-depth coverage for both students and engineers. The authors carefully balance comprehensive treatments of solid mechanics, elasticity, and computer-oriented numerical methods—preparing readers for both advanced study and professional practice in design and analysis. This major revision contains many new, fully reworked, illustrative examples and an updated problem set—including many problems taken directly from modern practice. It offers extensive content improvements throughout, beginning with an all-new introductory chapter on the fundamentals of materials mechanics and elasticity. Readers will find new and updated coverage of plastic behavior, three-dimensional Mohr’s circles, energy and variational methods, materials, beams, failure criteria, fracture mechanics, compound cylinders, shrink fits, buckling of stepped columns, common shell types, and many other topics. The authors present significantly expanded and updated coverage of stress concentration factors and contact stress developments. Finally, they fully introduce computer-oriented approaches in a comprehensive new chapter on the finite element method.

Download or read book Advances In Mechanics Of Solids In Memory Of Prof E M Haseganu written by Ardeshir Guran and published by World Scientific. This book was released on 2006-08-10 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contributions in this volume are written by well-known specialists in the fields of mechanics, materials modeling and analysis. They comprehensively address the core issues and present the latest developments in these and related areas. In particular, the book demonstrates the breadth of current research activity in continuum mechanics. A variety of theoretical, computational, and experimental approaches are reported, covering finite elasticity, vibration and stability, and mechanical modeling. The coverage reflects the extent and impact of the research pursued by Professor Haseganu and her international colleagues.

Download or read book Developments and Novel Approaches in Biomechanics and Metamaterials written by Bilen Emek Abali and published by Springer Nature. This book was released on 2020-07-06 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a selection of cutting-edge methods that allow readers to obtain novel models for nonlinear solid mechanics. Today, engineers need more accurate techniques for modeling solid body mechanics, chiefly due to innovative methods like additive manufacturing—for example, 3D printing—but also due to miniaturization. This book focuses on the formulation of continuum and discrete models for complex materials and systems, and especially the design of metamaterials. It gathers outstanding papers from the international conference IcONSOM 2019