Download or read book Advances in Rotor Dynamics Control and Structural Health Monitoring written by Subashisa Dutta and published by Springer Nature. This book was released on 2020-08-29 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of selected and peer-reviewed papers presented at the 13th International Conference on Vibration Problems (ICOVP 2017). The topics covered in this book are broadly related to the fields of structural health monitoring, vibration control and rotor dynamics. In the structural health monitoring section studies on nonlinear dynamic analysis, damage identification, viscoelastic model of concrete, and seismic damage assessment are thoroughly discussed with analytical and numerical techniques. The vibration control part includes topics such as multi-storeyed stacked tuned mass dampers, vibration isolation with elastomeric mounts, and nonlinear active vibration absorber. This book will be useful for beginners, researchers and professionals interested in the field of vibration control, structural health monitoring and rotor dynamics.

Download or read book Advances in Nonlinear Dynamics written by Walter Lacarbonara and published by Springer Nature. This book was released on 2022-03-01 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third of three volumes includes papers from the second series of NODYCON, which was held virtually in February of 2021. The conference papers reflect a broad coverage of topics in nonlinear dynamics, ranging from traditional topics from established streams of research to those from relatively unexplored and emerging venues of research. These include · Complex dynamics of COVID-19: modeling, prediction and control · Nonlinear phenomena in bio-systems and eco-systems · Energy harvesting · MEMS/NEMS · Multifunctional structures, materials and metamaterials · Nonlinear waves · Chaotic systems, stochasticity, and uncertainty

Download or read book Structural Health Monitoring For Advanced Composite Structures written by Aliabadi M H Ferri and published by World Scientific. This book was released on 2017-12-18 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural health monitoring (SHM) is a relatively new and alternative way of non-destructive inspection (NDI). It is the process of implementing a damage detection and characterization strategy for composite structures. The basis of SHM is the application of permanent fixed sensors on a structure, combined with minimum manual intervention to monitor its structural integrity. These sensors detect changes to the material and/or geometric properties of a structural system, including changes to the boundary conditions and system connectivity, which adversely affect the system's performance. This book's primary focus is on the diagnostics element of SHM, namely damage detection in composite structures. The techniques covered include the use of Piezoelectric transducers for active and passive Ultrasonics guided waves and electromechanical impedance measurements, and fiber optic sensors for strain sensing. It also includes numerical modeling of wave propagation in composite structures. Contributed chapters written by leading researchers in the field describe each of these techniques, making it a key text for researchers and NDI practitioners as well as postgraduate students in a number of specialties including materials, aerospace, mechanical and computational engineering. Contents: Damage Detection and Characterization with Piezoelectric Transducers — Active Sensing (Z Sharif Khodaei and M H Aliabadi)Modeling Guided Wave Propagation in Composite Structures Using Local Interaction Simulation Approach (Yanfeng Shen and Carlos E S Cesnik)Design and Development of a Phased Array System for Damage Detection in Structures (Bruno Rocha, Mehmet Yildiz & Afzal Suleman)Degradation Detection in Composite Structures with PZT Transducers (Wiesław M Ostachowicz, Paweł H Malinowski & Tomasz Wandowski)Numerical Modelling of Wave Propagation in Composite Structures (Sourav Banerjee)SHM of Composite Structures by Fibre Optic Sensors (Alfredo Guemes)Impact Detection and Identification with Piezoceramic Sensors — Passive Sensing (Z Sharif Khodaei and M H Aliabadi) Readership: Researchers and NDI practitioners as well as postgraduate students in a number of specialties including materials, aerospace, mechanical and computational engineering. Keywords: Structural Health Modelling;Non-Destrctive Inspection;Dignostic SHM;Aerospace Engineering;Microelectromechanical Systems;Acoustic Emission Monitoring;AccelerometersReview:0

Download or read book Advances in Industrial Engineering in the Industry 4 0 Era written by Kaushik Kumar and published by CRC Press. This book was released on 2024-06-17 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the core of this book are several application areas where Industry 4.0 has been, or can be, applied. This book introduces the Fourth Industrial Revolution, with discussions and reflections that will lead the reader into a deeper understanding of the nature of the concept. This book also reveals various facets that can be applied and utilized for implementation of the concept in various sectors. This book: • Comprehensively discusses skills for Industry 4.0 • Provides insights into the application of Industry 4.0 in the healthcare sector • Presents involvement of Industry 4.0 in current concepts such as supply chain and blockchain • Showcases innovative additive manufacturing to enhance human・machine co-working • Includes virtualization and simulation techniques for decision-making in manufacturing and assembly processes This book is primarily written for graduate students and academic researchers in the fields of industrial engineering, manufacturing engineering, mechanical engineering, production engineering, and aerospace engineering.

Download or read book Healthcare Research and Related Technologies written by Lalit M. Pandey and published by Springer Nature. This book was released on 2023-08-28 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the North East Research Conclave (NERC 2022). The book mainly covers research related to healthcare and related technologies. It includes broad bioengineering applications divided into four parts, namely, biomaterials and tissue engineering, biomedical science and engineering, drug delivery and therapeutics and cell and molecular biology. The book encompasses the latest research and advancements in the field of healthcare and related technologies. This book also describes a few studies based on computer simulations in bioengineering. In addition, the fundamental and basic aspects are also discussed for the better understanding of readers. The book can be a valuable reference for beginners, researchers and professionals interested in the field of healthcare and related technologies.

Download or read book Vibration Engineering and Technology of Machinery Volume I written by Rajiv Tiwari and published by Springer Nature. This book was released on 2023-12-26 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the XVI International Conference on Vibration Engineering and Technology of Machinery (VETOMAC 2021). It gathers the latest advances, innovations, and applications in the field of vibration and technology of machinery. Topics include concepts and methods in dynamics, dynamics of mechanical and structural systems, dynamics and control, condition monitoring, machinery and structural dynamics, rotor dynamics, experimental techniques, finite element model updating, industrial case studies, vibration control and energy harvesting, and MEMS. The contributions, which were selected through a rigorous international peer-review process, share exciting ideas that will spur novel research directions and foster new multidisciplinary collaborations. The book is useful for the researchers, engineers and professionals working in the area of vibration engineering and technology of machinery.

Download or read book Advances in River Corridor Research and Applications written by Vinay Chembolu and published by Springer Nature. This book was released on with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Condition Monitoring and Structural Health Monitoring written by Len Gelman and published by Springer Nature. This book was released on 2021-02-02 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the selected contributions from the 2nd World Congress on Condition Monitoring (WCCM 2019), held in Singapore in December 2019. The contents focus on digitalisation for condition monitoring with the emergence of the fourth industrial revolution (Industry 4.0) and the Industrial Internet-of-Things (IIoT). The book covers latest research findings in the areas of condition monitoring, structural health monitoring, and non-destructive testing which are relevant for many sectors including aerospace, automotive, civil, oil and gas, marine, and manufacturing industries. Different monitoring systems and non-destructive testing methods are discussed to avoid failures, increase lifespans, and reduce maintenance costs of equipment and machinery. The broad scope of the contents will make this book interesting for academics and professionals working in the areas of non-destructive evaluation and condition monitoring.

Download or read book Structural Health Monitoring written by Alessandro Pegoretti and published by SAE International. This book was released on 2018-11-20 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Health Management (SHM) is a key part of the Integrated Vehicle Health Management (IVHM) approach, whose main aim is to develop an integrated end-to-end system to monitor the overall health of a vehicle. Structural Health Monitoring: Current State and Future Trends, edited by Professor Alessandro Pegoretti, a scholar from the University of Trento in Italy, introduces the reader to recent developments involved in health monitoring of aerospace structures. The chapters, represented by seminal SAE International technical papers, offer an overview of the most recent advances in the sensing techniques for SHM, analysis of SHM data and its applications in aerospace. SHM can allow a continuous in-service inspection of the vehicle, thus reducing the cost associated with manual inspection at predetermined time intervals. The availability of reliable information on the loading conditions and health state of structural components by the implementation of SHM can be beneficial for several reasons, such as: • To prevent catastrophic failure • To reduce the number and the cost of unnecessary inspections • To improve the design of structural parts, with a reduction of the weight and the costs of overdesigned components Structural Health Monitoring: Current State and Future Trends offers a unique perspective on this field.

Download or read book Rotor Systems written by Rajiv Tiwari and published by CRC Press. This book was released on 2017-11-22 with total page 1153 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to give a basic understanding of rotor dynamics phenomena with the help of simple rotor models and subsequently, the modern analysis methods for real life rotor systems. This background will be helpful in the identification of rotor-bearing system parameters and its use in futuristic model-based condition monitoring and, fault diagnostics and prognostics. The book starts with introductory material for finite element methods and moves to linear and non-linear vibrations, continuous systems, vibration measurement techniques, signal processing and error analysis, general identification techniques in engineering systems, and MATLAB analysis of simple rotors. Key Features: • Covers both transfer matrix methods (TMM) and finite element methods (FEM) • Discusses transverse and torsional vibrations • Includes worked examples with simplicity of mathematical background and a modern numerical method approach • Explores the concepts of instability analysis and dynamic balancing • Provides a basic understanding of rotor dynamics phenomena with the help of simple rotor models including modern analysis methods for real life rotor systems.

Download or read book Advances in Mechanical and Industrial Engineering written by Muhamad Mat Noor and published by CRC Press. This book was released on 2022-07-01 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on ADVANCES IN MECHANICAL AND INDUSTRIAL ENGINEERING (ICAMIE –2020) aims to solidify knowledge of sister branches of research on Mechanical Engineering applied to Industry, Health Sectors, Energy Sector, Agricultural Sector etc. Mechanical Engineering is a core branch of Engineering with its own peculiarities and very diverse areas of action. (ICAMIE –2020) will widen the scope of bringing together innovators, researchers and industries under a common goal – creating, evaluating, implementing and benefiting from innovations in the areas of engineering applications It will thus support innovative projects and bring benefits to all involved participants. Participants from Universities, Institutes, Associations, Companies, Consultancies, R&Ds etc. from India and abroad will be invited. The aim of (ICAMIE –2020) is to be one of the most influential channels for transferring innovative ideas from academia to industry thereby these ideas may start to generate consultancy, projects and collaborations. The novel idea to conduct this type of conference is to discuss social and industrial problems and try to find a way to resolve their solutions by advanced methods and methodologies like soft computing techniques, Multi-criteria decision making algorithms, Internet of Things, technologies, Artificial intelligence, Robotics etc. (ICAMIE –2020) will be successful being the multidisciplinary conference of its first kind and aims to be one of the most influential channels transferring innovative ideas from academia to industry thereby these ideas may start to generate consultancy, projects and collaborations.

Download or read book Rotor Dynamics written by J. S. Rao and published by New Age International. This book was released on 1996 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Third Revised And Enlarged Edition Of The Book Presents An In-Depth Study Of The Dynamic Behaviour Of Rotating And Reciprocating Machinery. It Evolved Out Of Lectures Delivered At Different Universities Over The Last Two Decades. The Book Deals With Torsional And Bending Vibrations Of Rotors, Stability Aspects, Balancing And Condition Monitoring. Closed Form Solutions Are Given Wherever Possible And Parametric Studies Presented To Give A Clear Understanding Of The Subject. Transfer Matrix Methods Is Extensively Used For General Class Of Rotors For Both Bending And Torsional Vibrations.Special Attentions Are Given To Transient Analysis Of The Rotors Which Is Becoming An Essential Part Of The Design Of High Speed Machinery. Systems With Fluid Film Bearings, Cracked Rotors And Two Spool Rotors Are Also Presented.A First Course On Theory Of Vibration Is A Prerequisite To This Study. Analysis Used Is Fairly Simple, But Sufficiently Advanced To The Requisite Level Of Predicting Practical Observations. As Far As Possible, Practical Examples Are Illustrated, So That The Book Is Also Useful To Practising Engineers.A Special Feature Of This Book Is Diagnostics Of Rotating Machinery Using Vibration Signature Analysis And Application Of Expert Systems To A Field Engineer In Trouble Shooting Work.

Download or read book Mechanics and Model Based Control of Advanced Engineering Systems written by Alexander K. Belyaev and published by Springer Science & Business Media. This book was released on 2013-12-12 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics and Model-Based Control of Advanced Engineering Systems collects 32 contributions presented at the International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines, which took place in St. Petersburg, Russia in July 2012. The workshop continued a series of international workshops, which started with a Japan-Austria Joint Workshop on Mechanics and Model Based Control of Smart Materials and Structures and a Russia-Austria Joint Workshop on Advanced Dynamics and Model Based Control of Structures and Machines. In the present volume, 10 full-length papers based on presentations from Russia, 9 from Austria, 8 from Japan, 3 from Italy, one from Germany and one from Taiwan are included, which represent the state of the art in the field of mechanics and model based control, with particular emphasis on the application of advanced structures and machines.

Download or read book Control of Surge in Centrifugal Compressors by Active Magnetic Bearings written by Se Young Yoon and published by Springer Science & Business Media. This book was released on 2012-06-19 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surge Control of Active-magnetic-bearing-suspended Centrifugal Compressors sets out the fundamentals of integrating active magnetic bearing (AMB) rotor suspension technology in compressor systems, and describes how this relatively new bearing technology can be employed in active control of compressor surge initiation. The authors provide a self-contained and comprehensive review of rotordynamics and the fundamentals of AMB technology. The active stabilization of compressor surge employing AMBs in a machine is fully explored, from modeling of instability and controller design, to the implementation and experimental testing of the control algorithm in a specially-constructed, industrial-size centrifugal compression system. The results of these tests demonstrate the great potential of the new surge control method suggested in this text. This book will be useful for engineers in industries that involve turbocompressors and magnetic bearings, as well as for researchers and graduate students in the field of applied control. Whatever their level of experience, engineers working in the fields of turbomachinery, magnetic bearings, rotordynamics and controls will find the material in this book absorbing as all these important aspects of engineering are integrated to create a multi-disciplinary solution to a real-life industrial problem and the book is a suitable introduction to the area for newcomers.

Download or read book Structural Health Monitoring Management SHM in Aerospace Structures written by Fuh-Gwo Yuan and published by Elsevier. This book was released on 2024-04-30 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Health Monitoring (SHM) Management in Aerospace and Civil Structures provides readers with the spectacular progress that has taken place over the last twenty years with respect to the area of Structural Health Monitoring (SHM) Management. The SHM field encompasses transdisciplinary areas, including smart materials, sensors and actuators, damage diagnosis and prognosis, signal and image processing algorithms, wireless intelligent sensing, data fusion, and energy harvesting. This book focuses on how SHM techniques can be applied to aircraft, mechanical and civil engineering structures with particular emphasis on composite materials. Structural Health Monitoring (SHM) Management in Aerospace and Civil Structures will be a valuable reference resource for R&D managers, materials scientists and engineers working in the aerospace sector as well as for researchers and system designers working in industry, academia and government research agencies developing new systems for the SHM of aerospace, mechanical and civil engineering structures. Presents new developments in smart materials for sensing and actuation Discusses new developments in mechanical metamaterials Presents the latest on signal/imaging processing for damage diagnosis Explores damage prognosis and integrated vehicle health management (IVHM) Covers new developments in machine learning and artificial Intelligence

Download or read book Structural Health Monitoring 2000 written by Fu-Kuo Chang and published by CRC Press. This book was released on 1999-09-07 with total page 1104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprising 102 papers presented by researchers from all over the world, the proceedings of this workshop contain current information about a variety of structural health monitoring technologies, as well as their current and potential applications in various fields. Emphasis is placed on those technologies that are promising for future applications in industry and government and the infrastructures that are needed to support such technological development. The content of the workshop is divided into keynote presentations (ten altogether), aerospace applications, general applications, civil applications, integration and systems, sensors, and signal processing and diagnostic methods. Includes the editor's summary report on the results of the panel discussions and presentations from the First International Workshop on Structural Health Monitoring held at Stanford U. in September 1997. Annotation c. Book News, Inc., Portland, OR (booknews.com)

Download or read book Advances in Condition Monitoring of Machinery in Non Stationary Operations written by Fakher Chaari and published by Springer. This book was released on 2015-07-16 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides readers with a snapshot of recent research and technological trends in the field of condition monitoring of machinery working under a broad range of operating conditions. Each chapter, accepted after a rigorous peer-review process, reports on an original piece of work presented and discussed at the 4th International Conference on Condition Monitoring of Machinery in Non-stationary Operations, CMMNO 2014, held on December 15-16, 2014, in Lyon, France. The contributions have been grouped into three different sections according to the main subfield (signal processing, data mining or condition monitoring techniques) they are related to. The book includes both theoretical developments as well as a number of industrial case studies, in different areas including, but not limited to: noise and vibration; vibro-acoustic diagnosis; signal processing techniques; diagnostic data analysis; instantaneous speed identification; monitoring and diagnostic systems; and dynamic and fault modeling. This book not only provides a valuable resource for both academics and professionals in the field of condition monitoring, it also aims at facilitating communication and collaboration between the two groups.