Download or read book Advances in Power System Modelling Control and Stability Analysis written by Federico Milano and published by IET. This book was released on 2022-09-09 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: This expanded and updated second edition is an essential guide to technologies for operating modern flexible power systems. Additional content for this edition includes four new chapters on recent modelling, control and stability analysis of power electronic converters and electric vehicles.

Download or read book Power System Modeling Computation and Control written by Joe H. Chow and published by John Wiley & Sons. This book was released on 2020-01-21 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides students with an understanding of the modeling and practice in power system stability analysis and control design, as well as the computational tools used by commercial vendors Bringing together wind, FACTS, HVDC, and several other modern elements, this book gives readers everything they need to know about power systems. It makes learning complex power system concepts, models, and dynamics simpler and more efficient while providing modern viewpoints of power system analysis. Power System Modeling, Computation, and Control provides students with a new and detailed analysis of voltage stability; a simple example illustrating the BCU method of transient stability analysis; and one of only a few derivations of the transient synchronous machine model. It offers a discussion on reactive power consumption of induction motors during start-up to illustrate the low-voltage phenomenon observed in urban load centers. Damping controller designs using power system stabilizer, HVDC systems, static var compensator, and thyristor-controlled series compensation are also examined. In addition, there are chapters covering flexible AC transmission Systems (FACTS)—including both thyristor and voltage-sourced converter technology—and wind turbine generation and modeling. Simplifies the learning of complex power system concepts, models, and dynamics Provides chapters on power flow solution, voltage stability, simulation methods, transient stability, small signal stability, synchronous machine models (steady-state and dynamic models), excitation systems, and power system stabilizer design Includes advanced analysis of voltage stability, voltage recovery during motor starts, FACTS and their operation, damping control design using various control equipment, wind turbine models, and control Contains numerous examples, tables, figures of block diagrams, MATLAB plots, and problems involving real systems Written by experienced educators whose previous books and papers are used extensively by the international scientific community Power System Modeling, Computation, and Control is an ideal textbook for graduate students of the subject, as well as for power system engineers and control design professionals.

Download or read book Power System Dynamics and Stability written by Peter W. Sauer and published by . This book was released on 1998 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a one-semester senior or beginning graduate level course in power system dynamics. This text begins with the fundamental laws for basic devices and systems in a mathematical modeling context. It includes systematic derivations of standard synchronous machine models with their fundamental controls. These individual models are interconnected for system analysis and simulation. Singular perturbation is used to derive and explain reduced-order models.

Download or read book Handbook of Electrical Power System Dynamics written by Mircea Eremia and published by John Wiley & Sons. This book was released on 2013-02-21 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to provide insights on new trends in power systems operation and control and to present, in detail, analysis methods of the power system behavior (mainly its dynamics) as well as the mathematical models for the main components of power plants and the control systems implemented in dispatch centers. Particularly, evaluation methods for rotor angle stability and voltage stability as well as control mechanism of the frequency and voltage are described. Illustrative examples and graphical representations help readers across many disciplines acquire ample knowledge on the respective subjects.

Download or read book Power System Dynamics written by Jan Machowski and published by John Wiley & Sons. This book was released on 2020-06-08 with total page 885 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative guide to the most up-to-date information on power system dynamics The revised third edition of Power System Dynamics and Stability contains a comprehensive, state-of-the-art review of information on the topic. The third edition continues the successful approach of the first and second editions by progressing from simplicity to complexity. It places the emphasis first on understanding the underlying physical principles before proceeding to more complex models and algorithms. The book is illustrated by a large number of diagrams and examples. The third edition of Power System Dynamics and Stability explores the influence of wind farms and virtual power plants, power plants inertia and control strategy on power system stability. The authors—noted experts on the topic—cover a range of new and expanded topics including: Wide-area monitoring and control systems. Improvement of power system stability by optimization of control systems parameters. Impact of renewable energy sources on power system dynamics. The role of power system stability in planning of power system operation and transmission network expansion. Real regulators of synchronous generators and field tests. Selectivity of power system protections at power swings in power system. Criteria for switching operations in transmission networks. Influence of automatic control of a tap changing step-up transformer on the power capability area of the generating unit. Mathematical models of power system components such as HVDC links, wind and photovoltaic power plants. Data of sample (benchmark) test systems. Power System Dynamics: Stability and Control, Third Edition is an essential resource for students of electrical engineering and for practicing engineers and researchers who need the most current information available on the topic.

Download or read book Advances in Power System Modelling Control and Stability Analysis written by Federico Milano and published by IET. This book was released on 2016-08-08 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book captures the variety of new methodologies and technologies that are changing the way modern electric power systems are modelled, simulated and operated. It combines theoretical aspects with practical considerations and benchmarks test systems and real-world applications. Part 1 presents research on power system modelling and includes applications of telegrapher equations, power flow analysis, discrete Fourier transformation and stochastic differential equations. Part 2 focuses on power system operation and control, and presents insights on optimal power flow, real-time control and state estimation techniques. Finally, Part 3 describes advances in the stability analysis of power systems and covers voltage stability, transient stability, time delays, and limit cycles. With contributions from well-known authors who are accepted authorities in their respective fields, this is an important collection of high-quality papers summarizing state-of-the-art research. This is essential reading for researchers in academia and industry and advanced students in electric power systems modelling and control.

Download or read book Power System Control and Stability written by Paul M. Anderson and published by . This book was released on 1982 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Small signal stability control and dynamic performance of power systems written by M.J Gibbard and published by University of Adelaide Press. This book was released on 2015-07-15 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough and exhaustive presentation of theoretical analysis and practical techniques for the small-signal analysis and control of large modern electric power systems as well as an assessment of their stability and damping performance.

Download or read book Renewable Integrated Power System Stability and Control written by Hêmin Golpîra and published by John Wiley & Sons. This book was released on 2021-03-24 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: RENEWABLE INTEGRATED POWER SYSTEM STABILITY AND CONTROL Discover new challenges and hot topics in the field of penetrated power grids in this brand-new interdisciplinary resource Renewable Integrated Power System Stability and Control delivers a comprehensive exploration of penetrated grid dynamic analysis and new trends in power system modeling and dynamic equivalencing. The book summarizes long-term academic research outcomes and contributions and exploits the authors’ extensive practical experiences in power system dynamics and stability to offer readers an insightful analysis of modern power grid infrastructure. In addition to the basic principles of penetrated power system modeling, model reduction, and model derivation, the book discusses inertia challenge requirements and control levels, as well as recent advances in visualization of virtual synchronous generators and their associated effects on system performance. The physical constraints and engineering considerations of advanced control schemes are deliberated at length. Renewable Integrated Power System Stability and Control also considers robust and adaptive control strategies using real-time simulations and experimental studies. Readers will benefit from the inclusion of: A thorough introduction to power systems, including time horizon studies, structure, power generation options, energy storage systems, and microgrids An exploration of renewable integrated power grid modeling, including basic principles, host grid modeling, and grid-connected MG equivalent models A study of virtual inertia, including grid stability enhancement, simulations, and experimental results A discussion of renewable integrated power grid stability and control, including small signal stability assessment and the frequency point of view Perfect for engineers and operators in power grids, as well as academics studying the technology, Renewable Integrated Power System Stability and Control will also earn a place in the libraries of students in Electrical Engineering programs at the undergraduate and postgraduate levels who wish to improve their understanding of power system operation and control.

Download or read book Power System Modelling and Scripting written by Federico Milano and published by Springer Science & Business Media. This book was released on 2010-09-08 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power system modelling and scripting is a quite general and ambitious title. Of course, to embrace all existing aspects of power system modelling would lead to an encyclopedia and would be likely an impossible task. Thus, the book focuses on a subset of power system models based on the following assumptions: (i) devices are modelled as a set of nonlinear differential algebraic equations, (ii) all alternate-current devices are operating in three-phase balanced fundamental frequency, and (iii) the time frame of the dynamics of interest ranges from tenths to tens of seconds. These assumptions basically restrict the analysis to transient stability phenomena and generator controls. The modelling step is not self-sufficient. Mathematical models have to be translated into computer programming code in order to be analyzed, understood and “experienced”. It is an object of the book to provide a general framework for a power system analysis software tool and hints for filling up this framework with versatile programming code. This book is for all students and researchers that are looking for a quick reference on power system models or need some guidelines for starting the challenging adventure of writing their own code.

Download or read book Predictive Modelling for Energy Management and Power Systems Engineering written by Ravinesh Deo and published by Elsevier. This book was released on 2020-09-30 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: Predictive Modeling for Energy Management and Power Systems Engineering introduces readers to the cutting-edge use of big data and large computational infrastructures in energy demand estimation and power management systems. The book supports engineers and scientists who seek to become familiar with advanced optimization techniques for power systems designs, optimization techniques and algorithms for consumer power management, and potential applications of machine learning and artificial intelligence in this field. The book provides modeling theory in an easy-to-read format, verified with on-site models and case studies for specific geographic regions and complex consumer markets. - Presents advanced optimization techniques to improve existing energy demand system - Provides data-analytic models and their practical relevance in proven case studies - Explores novel developments in machine-learning and artificial intelligence applied in energy management - Provides modeling theory in an easy-to-read format

Download or read book Power System Dynamics and Stability written by Peter W. Sauer and published by John Wiley & Sons. This book was released on 2017-07-14 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Classic power system dynamics text now with phasor measurement and simulation toolbox This new edition addresses the needs of dynamic modeling and simulation relevant to power system planning, design, and operation, including a systematic derivation of synchronous machine dynamic models together with speed and voltage control subsystems. Reduced-order modeling based on integral manifolds is used as a firm basis for understanding the derivations and limitations of lower-order dynamic models. Following these developments, multi-machine model interconnected through the transmission network is formulated and simulated using numerical simulation methods. Energy function methods are discussed for direct evaluation of stability. Small-signal analysis is used for determining the electromechanical modes and mode-shapes, and for power system stabilizer design. Time-synchronized high-sampling-rate phasor measurement units (PMUs) to monitor power system disturbances have been implemented throughout North America and many other countries. In this second edition, new chapters on synchrophasor measurement and using the Power System Toolbox for dynamic simulation have been added. These new materials will reinforce power system dynamic aspects treated more analytically in the earlier chapters. Key features: Systematic derivation of synchronous machine dynamic models and simplification. Energy function methods with an emphasis on the potential energy boundary surface and the controlling unstable equilibrium point approaches. Phasor computation and synchrophasor data applications. Book companion website for instructors featuring solutions and PowerPoint files. Website for students featuring MATLABTM files. Power System Dynamics and Stability, 2nd Edition, with Synchrophasor Measurement and Power System Toolbox combines theoretical as well as practical information for use as a text for formal instruction or for reference by working engineers.

Download or read book Flexible AC Transmission Systems Modelling and Control written by Xiao-Ping Zhang and published by Springer Science & Business Media. This book was released on 2012-02-24 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: The extended and revised second edition of this successful monograph presents advanced modeling, analysis and control techniques of Flexible AC Transmission Systems (FACTS). The book covers comprehensively a range of power-system control problems: from steady-state voltage and power flow control, to voltage and reactive power control, to voltage stability control, to small signal stability control using FACTS controllers. In the six years since the first edition of the book has been published research on the FACTS has continued to flourish while renewable energy has developed into a mature and booming global green business. The second edition reflects the new developments in converter configuration, smart grid technologies, super power grid developments worldwide, new approaches for FACTS control design, new controllers for distribution system control, and power electronic controllers in wind generation operation and control. The latest trends of VSC-HVDC with multilevel architecture have been included and four completely new chapters have been added devoted to Multi-Agent Systems for Coordinated Control of FACTS-devices, Power System Stability Control using FACTS with Multiple Operating Points, Control of a Looping Device in a Distribution System, and Power Electronic Control for Wind Generation.

Download or read book Power System Stability and Control written by Prabha Kundur and published by Tata McGraw-Hill Education. This book was released on 1994 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Today's electric power systems are continually increasing in complexity due to interconnection growth, the use of new technologies, and financial and regulatory constraints. Sponsored by the Electric Power Research Institute, this expert engineering guide helps you deal effectively with stability and control problems resulting from these major changes in the industry. Power System Stability and Control contains the hands-on information you need to understand, model, analyze, and solve problems using the latest technical tools. You'll learn about the structure of modern power systems, the different levels of control, and the nature of stability problems you face in your day-to-day work. The book features a complete account of equipment characteristics and modeling techniques. Included is detailed coverage of generators, excitation systems, prime movers, ac and dc transmission, and system loads - plus principles of active and reactive power control, and models for control equipment. Different categories of power system stability are thoroughly covered with descriptions of numerous methods of analysis and control measures for mitigating the full spectrum of stability problems. This comprehensive source book is written from a pragmatic point of view, but without undue compromise in mathematical rigor. Filled with illustrative examples, it give the necessary basic theory and insight into practical aspects"--Back cover.

Download or read book Real Time Stability in Power Systems written by Savu C. Savulescu and published by Springer. This book was released on 2014-07-10 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This pioneering volume has been updated and enriched to reflect the state-of-the-art in blackout prediction and prevention. It documents and explains background and algorithmic aspects of the most successful steady-state, transient and voltage stability solutions available today in real-time. It also describes new, cutting-edge stability applications of synchrophasor technology, and captures industry acceptance of metrics and visualization tools that quantify and monitor the distance to instability. Expert contributors review a broad spectrum of additionally available techniques, such as trajectory sensitivities, ensuring this volume remains the definitive resource for industry practitioners and academic researchers in this critical area of power system operations.

Download or read book Transient Stability of Power Systems written by Mania Pavella and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: The market liberalization is expected to affect drastically the operation of power systems, which under economical pressure and increasing amount of transactions are being operated much closer to their limits than previously. These changes put the system operators faced with rather different and much more problematic scenarios than in the past. They have now to calculate available transfer capabilities and manage congestion problems in a near on line environment, while operating the transmission system under extremely stressed conditions. This requires highly reliable and efficient software aids, which today are non-existent, or not yet in use. One of the most problematic issues, very much needed but not yet en countered today, is on-line dynamic security assessment and control, enabling the power system to withstand unexpected contingencies without experienc ing voltage or transient instabilities. This monograph is devoted to a unified approach to transient stability assessment and control, called SIngle Machine Equivalent (S1ME).

Download or read book Power System Analysis written by Hadi Saadat and published by McGraw-Hill. This book was released on 2009-04-01 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an introduction to power system analysis and design. The text contains fundamental concepts and modern topics with applications to real-world problems, and integrates MATLAB and SIMULINK throughout.