Download or read book Advanced Engineering for Processes and Technologies written by Azman Ismail and published by Springer. This book was released on 2019-01-14 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents various state-of-the-art applications for the development of new materials and technologies, discussing computer-based engineering tools that are widely used in simulations, evaluation of data and design processes. For example, modern joining technologies can be used to fabricate new compound or composite materials, even those composed of dissimilar materials. Such materials are often exposed to harsh environments and must possess specific properties. Technologies in this context are mainly related to the transportation technologies in their wider sense, i.e. automotive and marine technologies, including ships, amphibious vehicles, docks, offshore structures, and robots. This book highlights the importance the finite element and finite volume methods that are typically used in the context of engineering simulations.

Download or read book Plastic Conversion Processes written by Eric Cybulski and published by CRC Press. This book was released on 2009-05-28 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The explosion of plastic material development continues to generate a proliferation of conversion processes and variants of these methods. Unfortunately, most books on plastics conversion focus on a single process, such as injection molding, limiting their usefulness to readers without prior knowledge of the field. Few, if any, single-source texts

Download or read book Comprehensive Materials Processing written by and published by Newnes. This book was released on 2014-04-07 with total page 5485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Materials Processing, Thirteen Volume Set provides students and professionals with a one-stop resource consolidating and enhancing the literature of the materials processing and manufacturing universe. It provides authoritative analysis of all processes, technologies, and techniques for converting industrial materials from a raw state into finished parts or products. Assisting scientists and engineers in the selection, design, and use of materials, whether in the lab or in industry, it matches the adaptive complexity of emergent materials and processing technologies. Extensive traditional article-level academic discussion of core theories and applications is supplemented by applied case studies and advanced multimedia features. Coverage encompasses the general categories of solidification, powder, deposition, and deformation processing, and includes discussion on plant and tool design, analysis and characterization of processing techniques, high-temperatures studies, and the influence of process scale on component characteristics and behavior. Authored and reviewed by world-class academic and industrial specialists in each subject field Practical tools such as integrated case studies, user-defined process schemata, and multimedia modeling and functionality Maximizes research efficiency by collating the most important and established information in one place with integrated applets linking to relevant outside sources

Download or read book Advanced Materials and Design for Electromagnetic Interference Shielding written by Xingcun Colin Tong and published by CRC Press. This book was released on 2016-04-19 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: With electromagnetic compliance (EMC) now a major factor in the design of all electronic products, it is crucial to understand how electromagnetic interference (EMI) shielding products are used in various industries. Focusing on the practicalities of this area, Advanced Materials and Design for Electromagnetic Interference Shielding comprehensively

Download or read book Encyclopedia of Automotive Engineering written by and published by John Wiley & Sons. This book was released on 2015-03-23 with total page 3888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Erstmals eine umfassende und einheitliche Wissensbasis und Grundlage für weiterführende Studien und Forschung im Bereich der Automobiltechnik. Die Encyclopedia of Automotive Engineering ist die erste umfassende und einheitliche Wissensbasis dieses Fachgebiets und legt den Grundstein für weitere Studien und tiefgreifende Forschung. Weitreichende Querverweise und Suchfunktionen ermöglichen erstmals den zentralen Zugriff auf Detailinformationen zu bewährten Branchenstandards und -verfahren. Zusammenhängende Konzepte und Techniken aus Spezialbereichen lassen sich so einfacher verstehen. Neben traditionellen Themen des Fachgebiets beschäftigt sich diese Enzyklopädie auch mit "grünen" Technologien, dem Übergang von der Mechanik zur Elektronik und den Möglichkeiten zur Herstellung sicherer, effizienterer Fahrzeuge unter weltweit unterschiedlichen wirtschaftlichen Rahmenbedingungen. Das Referenzwerk behandelt neun Hauptbereiche: (1) Motoren: Grundlagen; (2) Motoren: Design; (3) Hybrid- und Elektroantriebe; (4) Getriebe- und Antriebssysteme; (5) Chassis-Systeme; (6) Elektrische und elektronische Systeme; (7) Karosserie-Design; (8) Materialien und Fertigung; (9) Telematik. - Zuverlässige Darstellung einer Vielzahl von Spezialthemen aus dem Bereich der Automobiltechnik. - Zugängliches Nachschlagewerk für Jungingenieure und Studenten, die die technologischen Grundlagen besser verstehen und ihre Kenntnisse erweitern möchten. - Wertvolle Verweise auf Detailinformationen und Forschungsergebnisse aus der technischen Literatur. - Entwickelt in Zusammenarbeit mit der FISITA, der Dachorganisation nationaler Automobil-Ingenieur-Verbände aus 37 Ländern und Vertretung von über 185.000 Ingenieuren aus der Branche. - Erhältlich als stets aktuelle Online-Ressource mit umfassenden Suchfunktionen oder als Print-Ausgabe in sechs Bänden mit über 4.000 Seiten. Ein wichtiges Nachschlagewerk für Bibliotheken und Informationszentren in der Industrie, bei Forschungs- und Schulungseinrichtungen, Fachgesellschaften, Regierungsbehörden und allen Ingenieurstudiengängen. Richtet sich an Fachingenieure und Techniker aus der Industrie, Studenten höherer Semester und Studienabsolventen, Forscher, Dozenten und Ausbilder, Branchenanalysen und Forscher.

Download or read book Advances in Manufacturing Technology written by Rupinder Singh and published by CRC Press. This book was released on 2022-03-11 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This cross-disciplinary book transcends departmental, institutional, industrial, public, and research organizations and goes beyond global barriers to cover the integration of research, education, and manufacturing in advanced materials processing and characterization, including CAD-CAM, Finite Element Analysis (FEA), and smart manufacturing. Advances in Manufacturing Technology: Computational Materials Processing and Characterization focuses on the design of experiment-based computational models, which involves FEA along with an ergonomics-based design of tooling for both conventional and nonconventional manufacturing processes. It discusses research, work, and recent developments in the field of production manufacturing of any mechanical system. Case studies and solved numerical solutions are included at the end of each chapter for easy reading comprehension. The book is helpful to those working on new developments in the field of product manufacturing. It also acts as a first-hand source of information for academic scholars and commercial manufacturers as they make strategic manufacturing development plans.

Download or read book Advances in Corrosion Control of Magnesium and its Alloys written by Viswanathan S. Saji and published by CRC Press. This book was released on 2023-08-22 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium (Mg) and its alloys have received widespread acceptance in automobile industries and biomedical applications with substantial recent advancements made in their development, however a significant limitation remains their poor aqueous and galvanic corrosion resistance. This book covers both the fundamentals and recent advancements in two major corrosion protection strategies of magnesium and its alloys, namely, metal-matrix composites and protective coatings. Key features: Covers all aspects of metal-matrix composites and protective coatings for magnesium alloys to improve their corrosion resistance, wear resistance, mechanical properties and biocompatibility Provides the most recent research advancements in the corrosion mitigation strategies of magnesium and its alloys Complete with case studies specific to practical applications, this book serves as a ready reference for graduate students, researchers, engineers and industry professionals in the fields of materials, corrosion science, biofouling and protective coatings.

Download or read book Future Crops and Processing Technologies for Sustainability and Nutritional Security written by Soumya Ranjan Purohit and published by CRC Press. This book was released on 2024-09-06 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our current food system faces challenges across the board – from ensuring food security and reducing environmental impact to managing costs and minimizing waste. Fortunately, cutting-edge food processing technologies play a critical role in paving the way for a more sustainable future. Taking a two-track approach, Future Crops and Processing Technologies for Sustainability and Nutritional Security presents sustainable technologies and emerging crops that are capable of ensuring nutritional security. There are various crops that are nutritious but under-utilized. Crops covered in the book are those that are climate resilient and exhibit less use of water and zero discharge to environment, such as millets and legumes like chickpea, groundnuts, and pigeon pea. KEY FEATURES: Provides a comprehensive literature review on the opportunities and challenges in achieving sustainability and nutritional security Presents compatible, relevant crops to address both sustainability and nutritional security Discusses the emerging technologies/crops/food products to justify sustainability and potential to ensure nutritional security This book also provides information on all aspects related to the processing and use of sustainable technologies and crops. The use of technologies like 3D printing, novel drying method, high pressure processing, high-voltage treatments, and the proper combination of conventional methods are addressed.

Download or read book Advances in Materials Processing X written by Chuan Zhen Huang and published by Trans Tech Publications Ltd. This book was released on 2012-04-12 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 10th Asia-Pacific Conference on Materials Processing (APCMP 2012), June 14-17, 2012, Jinan, China

Download or read book Advances in Welding Technologies for Process Development written by Jaykumar Vora and published by CRC Press. This book was released on 2019-02-22 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within manufacturing, welding is by far the most widely used fabrication method used for production, leading to a rise in research and development activities pertaining to the welding and joining of different, similar, and dissimilar combinations of the metals. This book addresses recent advances in various welding processes across the domain, including arc welding and solid-state welding process, as well as experimental processes. The content is structured to update readers about the working principle, predicaments in existing process, innovations to overcome these problems, and direct industrial and practical applications. Key Features: Describes recent developments in welding technology, engineering, and science Discusses advanced computational techniques for procedure development Reviews recent trends of implementing DOE and meta-heuristics optimization techniques for setting accurate parameters Addresses related theoretical, practical, and industrial aspects Includes all the aspects of welding, such as arc welding, solid state welding, and weld overlay

Download or read book Modern Hydroforming Technology written by Shijian Yuan and published by Springer Nature. This book was released on 2022-10-21 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic and comprehensive illustration of principle, process and equipment regarding novel hydroforming technology for tube, sheet and shell structures. More than 100 industrial cases were used to aid the discussions enabling a vivid and thorough understanding to be delivered to readers. Readers with different professional levels cannot only get a preliminary while systematic overview to know hydroforming but also obtain practical guides for process designs.

Download or read book Plastics Waste Management written by Muralisrinivasan Natamai Subramanian and published by John Wiley & Sons. This book was released on 2019-09-02 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides clear explanations for newcomers to the subject as well as contemporary details and theory for the experienced user in plastics waste management. It is seldom that a day goes by without another story or photo regarding the problem of plastics waste in the oceans or landfills. While important efforts are being made to clear up the waste, this book looks at the underlying causes and focuses on plastics waste management. Plastics manufacturers have been slow to recognize their environmental impact compared with more directly polluting industries. However, the environmental pressures concerning plastics have forced the industry to examine their own recycling operations and implement plastics waste management. Plastics Waste Management realizes two ideals: That all plastics should be able to persist for as long as plastics are required, and that all plastics are recycled in a uniform manner regardless of the length of time for which it persists. The book examines plastics waste management and systems for the environment, as well the management approaches and techniques which are appropriate for managing the environment. It serves as an excellent and thoughtful plastics waste management handbook. This groundbreaking book: Identifies deficiencies in plastics waste management Extrapolates from experiences to draw some conclusions about plastics waste for persistence Describes methods how the waste related processing techniques should be used in recycling Shows how the consumer and industry can assess the performance of plastics waste management Explains waste utilization by recycling techniques as well as waste reduction Life cycle assessment as an important technique for recycling of persistent plastics waste.

Download or read book Advances in Engineering Materials written by Bhupendra Prakash Sharma and published by Springer Nature. This book was released on 2021-04-16 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Future Learning Aspects of Mechanical Engineering (FLAME 2020). This book, in particular, focuses on characterizing materials using novel techniques. It covers a variety of advanced materials, viz. composites, coatings, nanomaterials, materials for fuel cells, biomaterials among others. The book also discusses advanced characterization techniques like X-ray photoelectron, UV spectroscopy, scanning electron, atomic power, transmission electron and laser confocal scanning fluorescence microscopy, and gel electrophoresis chromatography. This book gives the readers an insight into advanced material processes and characterizations with special emphasis on nanotechnology.

Download or read book Handbook on Advanced Design and Manufacturing Technologies for Biomedical Devices written by Andrés Díaz Lantada and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: ​The last decades have seen remarkable advances in computer‐aided design, engineering and manufacturing technologies, multi‐variable simulation tools, medical imaging, biomimetic design, rapid prototyping, micro and nanomanufacturing methods and information management resources, all of which provide new horizons for the Biomedical Engineering fields and the Medical Device Industry. Advanced Design and Manufacturing Technologies for Biomedical Devices covers such topics in depth, with an applied perspective and providing several case studies that help to analyze and understand the key factors of the different stages linked to the development of a novel biomedical device, from the conceptual and design steps, to the prototyping and industrialization phases. Main research challenges and future potentials are also discussed, taking into account relevant social demands and a growing market already exceeding billions of dollars. In time, advanced biomedical devices will decisively change methods and results in the medical world, dramatically improving diagnoses and therapies for all kinds of pathologies. But if these biodevices are to fulfill present expectations, today’s engineers need a thorough grounding in related simulation, design and manufacturing technologies, and collaboration between experts of different areas has to be promoted, as is also analyzed within this handbook.

Download or read book Advanced Packaging written by and published by . This book was released on 2007-01 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Packaging serves the semiconductor packaging, assembly and test industry. Strategically focused on emerging and leading-edge methods for manufacturing and use of advanced packages.

Download or read book Intelligent Optimization of Mold Design and Process Parameters in Injection Molding written by Mehdi Moayyedian and published by Springer. This book was released on 2018-11-02 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes an effective framework for setting the right process parameters and new mold design to reduce the current plastic defects in injection molding. It presents a new approach for the optimization of injection molding process via (i) a new mold runner design which leads to 20 percent reduction in scrap rate, 2.5 percent reduction in manufacturing time, and easier ejection of injected part, (ii) a new mold gate design which leads to less plastic defects; and (iii) the introduction of a number of promising alternatives with high moldability indices. Besides presenting important developments of relevance academic research, the book also includes useful information for people working in the injection molding industry, especially in the green manufacturing field.

Download or read book Advancements in Materials Processing Technology Volume 1 written by Rina Sahu and published by Springer Nature. This book was released on with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: