Download or read book Advances in Non Linear Nano and Micromechanics Advanced Structured Materials written by Abdul-Hasib Morcos and published by . This book was released on 2014-12-18 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology ("nanotech") is the manipulation of matter on an atomic, molecular, and supramolecular scale. The earliest, widespread description of nanotechnology referred to the particular technological goal of precisely manipulating atoms and molecules for fabrication of macroscale products, also now referred to as molecular nanotechnology. A more generalized description of nanotechnology was subsequently established by the National Nanotechnology Initiative, which defines nanotechnology as the manipulation of matter with at least one dimension sized from 1 to 100 nanometers. This definition reflects the fact that quantum mechanical effects are important at this quantum-realm scale, and so the definition shifted from a particular technological goal to a research category inclusive of all types of research and technologies that deal with the special properties of matter that occur below the given size threshold. It is therefore common to see the plural form "nanotechnologies" as well as "nanoscale technologies" to refer to the broad range of research and applications whose common trait is size. Because of the variety of potential applications (including industrial and military), governments have invested billions of dollars in nanotechnology research. Through its National Nanotechnology Initiative, the USA has invested 3.7 billion dollars. The European Union has invested[when?] 1.2 billion and Japan 750 million dollars.
Download or read book Advances in Non Linear Nano Micromechanics written by Holm Altenbach and published by Springer. This book was released on 2014-09-03 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains fundamental studies fundamental mechanical (elastic, thermal, electrical, magnetic, biological, etc.) properties of systems at the nano- and micrometer scale. Nano-and Micromechanics have emerged on the crossroads of classical and non-classical mechanics, solid-state physics, statistical mechanics, materials science, quantum chemistry among others. In this sense they provide a scientific foundation of nano-and other advanced technologies. As a fundamental science, they are based on general mechanics principles and specific principles arising from the smallness of physical sizes of the object of study or research. The book contains the most exciting contributions to the mini- symposium “Nano- and Micromechanics” at the 6th International Conference Nonlinear Mechanics held in Shanghai (P.R. China) in August 2013.
Download or read book Advances in Linear and Nonlinear Continuum and Structural Mechanics written by Holm Altenbach and published by Springer Nature. This book was released on 2023-12-03 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a current image of modern mechanics. The book reflects current state of the art in the field of continuum mechanics and mechanics of structures including recent achievements in classic and non-classic approaches. The chapters are written by leading specialist in the field, so the book collects cutting edge investigations in the field. As a target we consider the society starting from beginners, i.e. master and PhD students, and also leaders in the field, that is professors of universities and civil, mechanical and aerospace engineers.
Download or read book Micromechanics and Nanomechanics of Composite Solids written by Shaker A. Meguid and published by Springer. This book was released on 2017-07-19 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book elucidates the most recent and highly original developments in the fields of micro- and nanomechanics and the corresponding homogenization techniques that can be reliably adopted and applied in determining the local properties, as well as the linear and nonlinear effective properties of the final architecture of these complex composite structures. Specifically, this volume, divided into three main sections—Fundamentals, Modeling, and Applications—provides recent developments in the mathematical framework of micro- and nanomechanics, including Green’s function and Eshelby’s inclusion problem, molecular mechanics, molecular dynamics, atomistic based continuum, multiscale modeling, and highly localized phenomena such as microcracks and plasticity. It is a compilation of the most recent efforts by a group of the world’s most talented and respected researchers. Ideal for graduate students in aerospace, mechanical, civil, material science, life sciences, and biomedical engineering, researchers, practicing engineers, and consultants, the book provides a unified approach in compiling micro- and nano-scale phenomena. · Elucidates recent and highly original developments in the fields of micromechanics and nanomechanics and the corresponding homogenization techniques; · Includes several new topics that are not covered in the current literature, such as micromechanics of metamaterials, electrical conductivity of CNT and graphene nanocomposites, ferroelectrics, piezoelectric, and electromagnetic materials; · Addresses highly localized phenomena such as coupled field problems, microcracks, inelasticity, dispersion of CNTs, synthesis, characterization and a number of interesting applications; · Maximizes readers’ ability to apply theories of micromechanics and nanomechanics to heterogeneous solids; · Illustrates application of micro- and nanomechanical theory to design novel composite and nanocomposite materials.
Download or read book Nanomechanics and Micromechanics written by Satya Bir Singh and published by CRC Press. This book was released on 2020-05-01 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume enables readers to interpret and predict the effective mechanical properties of existing and emerging composites through modeling and design. The book addresses that materials and structures with small-scale dimensions do not behave in the same manner as their bulk counterparts. Once the dimensions of the materials are reduced to the micron and sub-micron range, their properties are subject to significant change. Thus, mechanical properties will be varied and will depend on the sample size. In the meantime, due to the large surface-to-volume ration of small structures, deformation mechanisms are subject to change. This volume integrates various approaches in micromechanics and nanomechanics into a unified mathematical framework, complete with coverage of both linear and nonlinear behaviors. It weaves together the basic concepts, mathematical fundamentals, and formulations of micromechanics and nanomechanics into a systemic approach for understanding and modeling the effective material behavior of composite materials. While providing information on recent developments in the mathematical framework of micro- and nanomechanics, the volume addresses highly localized phenomena and a number of interesting applications. It also illustrates application of micromechanical and nanomechanical theory to design novel engineering materials.
Download or read book Advanced Computational Nanomechanics written by Nuno Silvestre and published by John Wiley & Sons. This book was released on 2015-12-24 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains the latest research advances in computational nanomechanics in one comprehensive volume Covers computational tools used to simulate and analyse nanostructures Includes contributions from leading researchers Covers of new methodologies/tools applied to computational nanomechanics whilst also giving readers the new findings on carbon-based aggregates (graphene, carbon-nanotubes, nanocomposites) Evaluates the impact of nanoscale phenomena in materials
Download or read book Higher Gradient Materials and Related Generalized Continua written by Holm Altenbach and published by Springer Nature. This book was released on 2019-11-04 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses recent findings and advanced theories presented at two workshops at TU Berlin in 2017 and 2018. It underlines several advantages of generalized continuum models compared to the classical Cauchy continuum, which although widely used in engineering practice, has a number of limitations, such as: • The structural size is very small. • The microstructure is complex. • The effects are localized. As such, the development of generalized continuum models is helpful and results in a better description of the behavior of structures or materials. At the same time, there are more and more experimental studies supporting the new models because the number of material parameters is higher.
Download or read book Advances in Predictive Models and Methodologies for Numerically Efficient Linear and Nonlinear Analysis of Composites written by Marco Petrolo and published by Springer. This book was released on 2019-02-24 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers contributions addressing issues related to the analysis of composite structures, whose most relevant common thread is augmented numerical efficiency, which is more accurate for given computational costs than existing methods and methodologies. It first presents structural theories to deal with the anisotropy of composites and to embed multifield and nonlinear effects to extend design capabilities and provide methods of augmenting the fidelity of structural theories and lowering computational costs, including the finite element method. The second part of the book focuses on damage analysis; the multiscale and multicomponent nature of composites leads to extremely complex failure mechanisms, and predictive tools require physics-based models to reduce the need for fitting and tuning based on costly and lengthy experiments, and to lower computational costs; furthermore the correct monitoring of in-service damage is decisive in the context of damage tolerance. The third part then presents recent advances in embedding characterization and manufacturing effects in virtual testing. The book summarizes the outcomes of the FULLCOMP (FULLy integrated analysis, design, manufacturing, and health-monitoring of COMPosite structures) research project.
Download or read book Nonlinear Wave Dynamics of Materials and Structures written by Holm Altenbach and published by Springer Nature. This book was released on 2020-04-22 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book marks the 60th birthday of Prof. Vladimir Erofeev – a well-known specialist in the field of wave processes in solids, fluids, and structures. Featuring a collection of papers related to Prof. Erofeev’s contributions in the field, it presents articles on the current problems concerning the theory of nonlinear wave processes in generalized continua and structures. It also discusses a number of applications as well as various discrete and continuous dynamic models of structures and media and problems of nonlinear acoustic diagnostics.
Download or read book Recent Advances in Elastomeric Nanocomposites written by Vikas Mittal and published by Springer. This book was released on 2013-02-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: ‘Recent Advances in Elastomeric Nanocomposites’ reviews the recent progresses in the synthesis, processing as well as applications of elastomeric nanocomposites. Elastomers are a very important class of polymer materials and the generation of their nanocomposites by the incorporation of nano-filler has led to significant enhancement of their properties and, hence, expansion of their application potential. Most of the studies related with these materials are present in the form of research papers. Here, the authors present a comprehensive text covering the whole of the subject. The book is tailored more from the applications point of view, but also provide enough introductory material for research scholars new to this field.
Download or read book Structural Modeling of Metamaterials written by Vladimir I. Erofeev and published by Springer Nature. This book was released on 2020-11-13 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the theoretical foundations of the structural modeling method applied to metamaterials. This method takes into account the parameters of the crystal lattice, the size of the medium particles, as well as their shape and constants of force interactions between them. It provides mathematical models of metamaterials that offer insights into the qualitative influence of the local structure on the effective elastic moduli of the considered medium and into performing theoretical estimations of these quantities. This book is useful for researchers working in the fields of solid mechanics, physical acoustics, and condensed matter physics, as well as for graduate and postgraduate students studying mathematical modeling methods.
Download or read book The 2nd International Conference Material Engineering and Application written by Mosbeh Kaloop and published by Trans Tech Publications Ltd. This book was released on 2018-01-25 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of the 2nd International Conference on Material Engineering and Application (2nd ICMEA 2017, Shanghai, China, August 18-20, 2017) was to bring together academics, engineers, postgraduates and other professionals in the area of material science and engineering technology from many countries for the exchange of experience and discussion of the recent advances and the practical techniques in the field of materials science, mechanical engineering and manufacturing technologies. This book introduces to readers the newest research results in the field of material properties; materials testing and application in the mechanical engineering; newest experience in the engineering designing, materials manufacturing and processing technologies.
Download or read book Advances in Mechanics of Microstructured Media and Structures written by Francesco dell'Isola and published by Springer. This book was released on 2018-02-27 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an homage to the pioneering works of E. Aero and G. Maugin in the area of analytical description of generalized continua. It presents a collection of contributions on micropolar, micromorphic and strain gradient media, media with internal variables, metamaterials, beam lattices, liquid crystals, and others. The main focus is on wave propagation, stability problems, homogenization, and relations between discrete and continuous models.
Download or read book Introduction to Micromechanics and Nanomechanics written by Shaofan Li and published by World Scientific Publishing Company. This book was released on 2008-07-28 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides both the theoretical foundation, as well as the authors' latest contributions to micromechanics and its applications in nanomechanics, nanocomposites, dislocation and thin film theories, and configurational mechanics theory. It serves primarily as a graduate level textbook, intended for first year graduate students in materials science, applied computational mechanics, nano-science and technology, and mechanical engineering. This book also serves as a research monograph by compiling recent developments in dislocation dynamics, numerical simulations of material failure, and homogenization theories.
Download or read book Handbook of Micromechanics and Nanomechanics written by Shaofan Li and published by CRC Press. This book was released on 2016-04-19 with total page 1256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest developments and applications of micromechanics and nanomechanics. It particularly focuses on some recent applications and impact areas of micromechanics and nanomechanics that have not been discussed in traditional micromechanics and nanomechanics books on metamaterials, micromechanics of ferroelectric/piezoelectric,
Download or read book Advances in Solid and Fracture Mechanics written by Holm Altenbach and published by Springer Nature. This book was released on 2022-11-08 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of articles reporting the current challenges in solid and fracture mechanics. The book is devoted to the 90th birthday of academician Nikita F. Morozov—a well-known specialist in the field of solid and fracture mechanics.
Download or read book Complementarity Duality and Symmetry in Nonlinear Mechanics written by David Yang Gao and published by Springer Science & Business Media. This book was released on 2012-11-08 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complementarity, duality, and symmetry are closely related concepts, and have always been a rich source of inspiration in human understanding through the centuries, particularly in mathematics and science. The Proceedings of IUTAM Symposium on Complementarity, Duality, and Symmetry in Nonlinear Mechanics brings together some of world's leading researchers in both mathematics and mechanics to provide an interdisciplinary but engineering flavoured exploration of the field's foundation and state of the art developments. Topics addressed in this book deal with fundamental theory, methods, and applications of complementarity, duality and symmetry in multidisciplinary fields of nonlinear mechanics, including nonconvex and nonsmooth elasticity, dynamics, phase transitions, plastic limit and shakedown analysis of hardening materials and structures, bifurcation analysis, entropy optimization, free boundary value problems, minimax theory, fluid mechanics, periodic soliton resonance, constrained mechanical systems, finite element methods and computational mechanics. A special invited paper presented important research opportunities and challenges of the theoretical and applied mechanics as well as engineering materials in the exciting information age. Audience: This book is addressed to all scientists, physicists, engineers and mathematicians, as well as advanced students (doctoral and post-doctoral level) at universities and in industry.
