Download or read book Measurement Control and Communication Using IEEE 1588 written by John C. Eidson and published by Springer Science & Business Media. This book was released on 2006-05-01 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: A common sense of time among the elements of a distributed measurement and control system allows the use of new techniques in solving problems with complex synchronization requirements or arising from the interaction of many sensors and actuators. Such a common sense of time may be accomplished using the standard IEEE 1588-2002 to synchronize real-time clocks integral to each component of the system. IEEE 1588, expands the performance capabilities of Ethernet networks so that they become relevant for measurement and control; this monograph embodies the first unified treatment of the associated technology, standards and applications. Readers will gain understanding of the technological context of IEEE 1588 and its role in a variety of application settings. To engineers this monograph provides detailed discussion of the complex features of the standard. Together with the essential material on best practice and implementation issues, these provide invaluable assistance in the design of new applications.

Download or read book Advances in Measurement and Control of Colloidal Processes written by R. A. F. Williams and published by Elsevier. This book was released on 2013-10-22 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Measurement and Control of Colloidal Processes compiles a selection of papers presented at the International Symposium on Colloid and Surface Engineering held in San Diego in August 1990. This book emphasizes practical measurement and exploitation of the principles of surface and interface science that embrace a wide range of industrial sectors. The topics are arranged according to specific measurement techniques or phenomena. The focus includes processing and characterization of aggregated materials; developments in instrumentation for monitoring and characterization of dispersions; controlled particle formation technologies; mineral and inorganic colloids-micro and macroscopic characterization methods; measurement and simulation of complex colloidal processes; and advances and problems in micron and sub-micron sizing techniques. This text is a useful reference for engineering students and industrial practitioners who conduct research on colloid and surface engineering.

Download or read book Frequency Measurement and Control written by Andre N. Luiten and published by Springer Science & Business Media. This book was released on 2003-07-01 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text on precision frequency measurement and its key enabling techniques includes reviews written by some of the most experienced researchers in their respective fields. This text should prove useful to researchers just entering the field of frequency metrology and standards, or equally well to the experienced practitioner.

Download or read book Advanced Temperature Measurement and Control written by Gregory K. McMillan and published by Isa. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive view of what is needed to take advantage of the latest developments in smart and wireless temperature measurements and control strategies.

Download or read book Quantum Measurement and Control written by Howard M. Wiseman and published by Cambridge University Press. This book was released on 2010 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern quantum measurement for graduate students and researchers in quantum information, quantum metrology, quantum control and related fields.

Download or read book Measurement and Control of Charged Particle Beams written by Michiko G. Minty and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the reviews: "This book is a very welcome and valuable addition to the accelerator literature. As noted by the authors, there is relatively little material in the book specifically for low-energy machines, but industrial users may still find it useful to read." Cern Courier

Download or read book Sensors for Measurement and Control written by Peter Elgar and published by Prentice Hall. This book was released on 1998 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written as a complementary text to TecQuipment's sensors teaching package, but useful as a stand alone reference, Sensors for Measurment and Control describes the principles and applications of sensors used in engineering.

Download or read book Precipitation Advances in Measurement Estimation and Prediction written by Silas C. Michaelides and published by Springer Science & Business Media. This book was released on 2008-02-27 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the outcome of contributions from 51 scientists who were invited to expose their latest findings on precipitation research and in particular, on the measurement, estimation and prediction of precipitation. The reader is presented with a blend of theoretical, mathematical and technical treatise of precipitation science but also with authentic applications, ranging from local field experiments and country-scale campaigns to multinational space endeavors.

Download or read book Advances in Reactor Measurement and Control written by Gregory K. McMillian and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written from a practical perspective, Advances in Reactor Measurement and Control underscores how control system design can address the different process responses and fundamental characteristics of the major types of reactors in the process industry. This book enables the reader to learn what measurements, control strategies, controller features and tuning parameters will achieve process objectives for a given type of reactor. No prior education or experience in process engineering or control theory is needed. This book starts with the fundamentals and principles needed to become proficient in getting the best reactor and control system performance. The practitioner will be able to design, implement and support straightforward configurations based on the type of process and equipment. McMillan--the author of more than 20 books, including several ISA best sellers, Process Automation Hall of Fame Inductee and the recipient of the ISA Life Achievement Award--educates through a practitioner's experience and perspective, outlining the general concepts and details, from the field to the control room, for the control and optimization of batch and continuous reactors. "Taking a practitioner's approach, I believe, is unique," McMillan says. "The concepts in this book are developed to help the reader understand the fundamental differences in reactor applications and improve the performance of nearly all types of reactors. This book is unique in providing readily configurable practical solutions for batch and fluidized bed reactors besides the more traditional continuous stirred tank reactors. According to McMillan, the book's practical value is reinforced through its: . Simple presentation of the characteristics and implications of each of the dynamic responses needed to achieve the necessary efficiency, capacity, quality, and safety in operation. . Clear explanation of the PID features and tuning and control loops needed for addressing the lack of smoothing in dead time dominant processes and the lack of negative feedback in integrating and runaway processes. The material in this book represents knowledge from leading participants in the ISA Mentor program, Brian Hrankowsky and Hector Torres, reflecting decades of experience in the pharmaceutical and chemical industry, respectively. "

Download or read book Measurement Modeling and Automation in Advanced Food Processing written by Bernd Hitzmann and published by Springer. This book was released on 2017-08-11 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book review series presents current trends in modern biotechnology. The aim is to cover all aspects of this interdisciplinary technology where knowledge, methods and expertise are required from chemistry, biochemistry, microbiology, genetics, chemical engineering and computer science. Volumes are organized topically and provide a comprehensive discussion of developments in the respective field over the past 3-5 years. The series also discusses new discoveries and applications. Special volumes are dedicated to selected topics which focus on new biotechnological products and new processes for their synthesis and purification. In general, special volumes are edited by well-known guest editors. The series editor and publisher will however always be pleased to receive suggestions and supplementary information. Manuscripts are accepted in English.

Download or read book Measurement and Control Basics written by Thomas A. Hughes and published by . This book was released on 1988 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Instrumentation Reference Book written by Walt Boyes and published by Butterworth-Heinemann. This book was released on 2009-11-25 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: The discipline of instrumentation has grown appreciably in recent years because of advances in sensor technology and in the interconnectivity of sensors, computers and control systems. This 4e of the Instrumentation Reference Book embraces the equipment and systems used to detect, track and store data related to physical, chemical, electrical, thermal and mechanical properties of materials, systems and operations. While traditionally a key area within mechanical and industrial engineering, understanding this greater and more complex use of sensing and monitoring controls and systems is essential for a wide variety of engineering areas--from manufacturing to chemical processing to aerospace operations to even the everyday automobile. In turn, this has meant that the automation of manufacturing, process industries, and even building and infrastructure construction has been improved dramatically. And now with remote wireless instrumentation, heretofore inaccessible or widely dispersed operations and procedures can be automatically monitored and controlled. This already well-established reference work will reflect these dramatic changes with improved and expanded coverage of the traditional domains of instrumentation as well as the cutting-edge areas of digital integration of complex sensor/control systems. - Thoroughly revised, with up-to-date coverage of wireless sensors and systems, as well as nanotechnologies role in the evolution of sensor technology - Latest information on new sensor equipment, new measurement standards, and new software for embedded control systems, networking and automated control - Three entirely new sections on Controllers, Actuators and Final Control Elements; Manufacturing Execution Systems; and Automation Knowledge Base - Up-dated and expanded references and critical standards

Download or read book The Condensed Handbook of Measurement and Control written by N. E. Battikha and published by Instrument Society of America. This book was released on 1996-05-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ideal for everyday use by project managers, process engineers, mechanical engineers and sales people, this handbook provides quick access to symbols, selection criteria, conversion guidelines, and more. This compact reference contains key information that is often needed on a regular basis. Due to its size and weight it is very portable, thus making it your first choice to take to meetings or remote locations. It is a mini version of more expensive, larger, detailed shelf-based handbooks such as ISA's PGS Series and the ISA Directory. Its affordable price makes this book perfect for companies who are just starting up or have limited budgets. Contents: Symbols Measurement Control Loops Control Valves Tables for Conversion, Corrosion, Resistance.

Download or read book PC BASED INSTRUMENTATION written by N. MATHIVANAN and published by PHI Learning Pvt. Ltd.. This book was released on 2007-01-21 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: This well-organized book is intended for the undergraduate students of Electrical, Electronics and Communications, Computer, Instrumentation and Instrumentation and Control Engineering; and postgraduate students of science in Electronics, Physics and Instrumentation. Data acquisition being the core of all PC-based measurements and control instrumentation systems engineering, this book presents detailed discussions on PC bus based data acquisition, remote data acquisition, GPIB data acquisition and networked data acquisition configurations. This book also describes sensors, signal-conditioning and principles of PC-based data acquisition. It provides several latest and advanced techniques. This book stresses the need for understanding the use of Personal Computers in measurement and control instrumentation applications. KEY FEATURES : • Provides several laboratory experiments to help the readers to gain hands-on experience in PC-based measurement and control. • Provides a number of review questions/problems (with solutions to the odd numbered problems) and objective type questions with solutions. • Presents a number of working circuits, design and programming examples. • Presents comparison of properties, features and characteristics of different bus systems, interface standards, and network protocols. • Includes the advanced techniques such as sigma–delta converter, RS-485, I2C bus, SPI bus, FireWire, IEEE-488.2, SCPI and Fieldbus standards.

Download or read book Performance Assessment of Control Loops written by Biao Huang and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Advances in Industrial Control aims to report and encourage technology transfer in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies. . . , new challenges. Much of this development work resides in industrial reports, feasibility study papers and the reports of advanced collaborative projects. The series offers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for widerand rapid dissemination. Benchmarking is a technique first applied by Rank Xerox in the late 1970s for business processes. As a subject in the commercial arena, benchmarking thrives with, for example, a European Benchmarking Forum. It has taken rather longer for benchmarking to make the transfer to the technical domain and even now the subject is making a slow headway. Akey research step in this direction was taken by Harris (1989) who used minimum variance control as a benchmark for controller loop assessment. This contribution opened up the area and a significant specialist literature has now developed. Significant support for the methodologywas given by Honeywell who have controller assessment routines in their process control applications software; therefore, it is timely to welcome a (first) monograph on controller performance assessment by Biao Huang and Sirish Shah to the Advances in Industrial Control series.

Download or read book Control Systems Safety Evaluation and Reliability written by William M. Goble and published by . This book was released on 1998 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Principles of Measurement and Instrumentation written by Alan S. Morris and published by . This book was released on 1993 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents the subject of instrumentation and its use within measurement systems as an integrated and coherent subject. This edition has been thoroughly revised and expanded with new material and five new chapters. Features of this edition are: an integrated treatment of systematic and random errors, statistical data analysis and calibration procedures; inclusion of important recent developments, such as the use of fibre optics and instrumentation networks; an overview of measuring instruments and transducers; and a number of worked examples.