Download or read book Advances in Materials Processing Technologies written by Mariano Marcos and published by Trans Tech Publications. This book was released on 2006 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing can be considered to be the most wide-ranging, interdisciplinary and sometimes-controversial branch of Engineering. It is even sometimes difficult to define it concisely, but everybody recognises its contributions.
Download or read book Polymer Processing and Characterization written by Sabu Thomas and published by CRC Press. This book was released on 2012-07-23 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the polymers, different methods of synthesis, and synthesis of composites, as well as the different techniques used for polymer characterization. Most of the world’s industries extract the anomalous properties of polymers to make excellent cost-effective materials. Because of this, the types of polymers, their processing, and the analysis of their various properties are very significant. Readers will gain a thorough knowledge about the processing of different types of polymers and composites made from them, as well as their various applications. Suitable for classroom use but especially important for researchers, this book addresses: Adhesion of amorphous polymers with vitrified bulk and surface glass transition Functionalized biopolymers and their applications A new synthesis of p-Cresol-Adipamide-Formaldehyde copolymer resin and its applications as an ion-changer Correlating performance of commercial viscosity modifiers for formulating shear stable industrial lubricants Synthesis of phthalonitrile polymers in ionic liquid and microwave media Studies on nanocomposite polymer electrolytes doped with Ca3(PO4)2 for lithium batteries
Download or read book Advances in Materials Science and Technology AMST written by Utpal S. Joshi and published by Trans Tech Publications Ltd. This book was released on 2013-11-15 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the National Symposium on Advances in Materials Science and Technology (AMST-2012), February 3-4, 2012, Ahmedabad, India
Download or read book Advances in Materials and Processing Technologies II written by M.S.J. Hashmi and published by Trans Tech Publications Ltd. This book was released on 2011-06-30 with total page 2018 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the International Conference on Advances in Materials and Processing Technologies (AMPT), 26-29 October, 2009
Download or read book Advanced Materials Processing and Manufacturing written by Yogesh Jaluria and published by Springer. This book was released on 2018-05-24 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on advanced processing of new and emerging materials, and advanced manufacturing systems based on thermal transport and fluid flow. It examines recent areas of considerable growth in new and emerging manufacturing techniques and materials, such as fiber optics, manufacture of electronic components, polymeric and composite materials, alloys, microscale components, and new devices and applications. The book includes analysis, mathematical modeling, numerical simulation and experimental study of processes for prediction, design and optimization. It discusses the link between the characteristics of the final product and the basic transport mechanisms and provides a foundation for the study of a wide range of manufacturing processes. Focuses on new and advanced methods of manufacturing and materials processing with traditional methods described in light of the new approaches; Maximizes reader understanding of the fundamentals of how materials change, what transport processes are involved, and how these can be simulated and optimized - concepts not covered elsewhere; Introduces new materials and applications in manufacturing and summarizes traditional processing methods, such as heat treatment, extrusion, casting, injection molding, and bonding, to show how they have evolved and how they could be used for meeting the challenges that we face today.
Download or read book Advanced Materials and Processing written by and published by . This book was released on 1992 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Advances in Materials and Manufacturing Technologies written by P. Nageswara Rao and published by Trans Tech Publications Ltd. This book was released on 2019-08-30 with total page 933 pages. Available in PDF, EPUB and Kindle. Book excerpt: International Conference on Recent Advances in Materials and Manufacturing Technologies (ICRAMMT 2018) Selected, peer reviewed papers from the 2nd International Conference on Recent Advances in Materials and Manufacturing Technologies (ICRAMMT-2018), November 19-20, 2018, Hyderabad, India
Download or read book THERMEC 2021 written by Mihail Ionescu and published by Trans Tech Publications Ltd. This book was released on 2021-01-05 with total page 1937 pages. Available in PDF, EPUB and Kindle. Book excerpt: International Conference on Processing & Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications Selected, peer-reviewed papers from the International Conference on Processing & Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications (THERMEC 2021), May 10-14, 2021, Vienna, Austria
Download or read book Novel Materials Processing by Advanced Electromagnetic Energy Sources written by S. Miyake and published by Elsevier. This book was released on 2005-11-21 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the International Symposium in Novel Materials Processing by Advanced Electromagnetic Energy Sources (MAPEES'04)*Identifies and details recent progress achieved by advanced electromagnetic energy sources in materials processing.*Explores novel approaches to advanced electromagnetic energy processing of materials in an attempt to discover new and unique industrial fields.
Download or read book Advanced Materials and Processing written by Federal Coordinating Council for Science, Engineering, and Technology. Committee on Industry and Technology and published by . This book was released on 1992 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nontraditional Manufacturing Processes written by Gary F. Benedict and published by CRC Press. This book was released on 2017-10-19 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a convenient, single source of information on advanced machining, material forming, and joining processes. It describes available technologies that use tools, such as high velocity material jets, pulsed magnetic fields, light beams, electrochemical reactions, and more. Organized by type of process (mechanical, chemical, electrochemical, and thermal), the book discusses 31 important nontraditional processes and covers each process’s principles, equipment, capabilities, and operating parameters. The author includes a list of nontraditional manufacturing firms, nearly 250 figures that clearly illustrate the technologies, and numerous bibliographic citations for additional reading.
Download or read book Composite Materials and Processing written by M. Balasubramanian and published by CRC Press. This book was released on 2013-10-04 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite Materials and Processing provides the science and technology of processing several composites using different processing methods, and includes collective information on the processing of common and advanced composite materials. It also weighs the advantages and disadvantages of various processing methods. This book is suitable for materia
Download or read book Adhesives in Manufacturing written by Schneberger and published by Routledge. This book was released on 2018-10-24 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an exhaustive range of detailed, easy-access information required to initiate or improve an adhesive bonding operation in a modern industrial environment. Featuring recent developments and more than 400 photos, figures, and tables, this practical reference is the most comprehensive up-to-date book available. Designed for engineers and technicians confronting everyday problems of selections, surface preparation, applications, and curing, this book progresses from fundamental concepts to all types of adhesives, bonding techniques, and performance, durability, and testing of bonds, including such areas as acrylic and urethan adhesives, and water-based systems.
Download or read book Anomalous X Ray Scattering for Materials Characterization written by Yoshio Waseda and published by Springer. This book was released on 2003-07-01 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: The production of multi layered thin films with sufficient reliability is a key technology for device fabrication in micro electronics. In the Co/Cu type multi layers, for example, magnetoresistance has been found as large as 80 % at 4. 2 K and 50 % at room temperature. In addition to such gigantic mag netoresistance, these multi layers indicate anti ferromagnetic and ferromag netic oscillation behavior with an increase in the thickness of the layers of the non magnetic component. These interesting properties of the new synthetic flmctional materials are attributed to their periodic and interracial structures at a microscopic level, although the origin of such peculiar features is not fully understood. Information on the surface structure or the number density of atoms in the near surface region may provide better insight. Amorphous alloys, frequently referred to as metallic glasses, are produced by rapid quenching from the melt. The second generation amorphous alloys, called "bulk amorphous alloys", have been discovered in some Pd based and Zr based alloy systems, with a super cooled liquid region at more than 120 K. In these alloy systems, one can obtain a sample thickness of several centime ters. Growing scientific and technological curiosity about the new amorphous alloys has focused on the fundamental factors, such as the atomic scale struc ture, which are responsible for the thermal stability with certain chemical compositions.
Download or read book Advanced Materials Processing and Manufacturing written by Amogelang Sylvester Bolokang and published by CRC Press. This book was released on 2023-10-02 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the operations and industrial processes related to the production of advanced materials including ingot and powder metallurgy processing routes. It outlines the deformation processing mechanisms inducing failure at both ambient and high temperatures. Further, it embodies practical knowledge and engineering mechanisms of traditional and unorthodox material disposal approaches, concurrently with gear cutting/ manufacturing and computer numerically controlled machining. The surface fusion of metals in the production of coatings via the process of laser cladding is also covered. Features: Covers novel and multi-variety techniques of materials processing and manufacturing. Reports on the significant variables of the processes and basic operations of advanced materials. Discusses fundamental and engineering machining analysis. Includes novel fabrication of TiAl alloys using both powder and ingot metallurgy routes. Enables critical thinking through technical problem solving of local service manufacturers. This book is aimed at researchers and graduate students in materials and manufacturing engineering.
Download or read book Advanced X ray Techniques in Research and Industry written by Ashok Kumar Singh and published by IOS Press. This book was released on 2005 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers presented at the seminar held in Defence Metallurgical Research Laboratory, Hyderabad India in 2003.
Download or read book Processing and Fabrication of Advanced Materials VIII written by K. A. Khor and published by World Scientific. This book was released on 2000 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the technical papers presented at the international symposium entitled OC Processing and Fabrication of Advanced Materials VIIIOCO, held in Singapore in 1999. This was the eighth in a series of symposia bringing together engineers and researchers from industry, academia and national laboratories, working on aspects related to the processing, fabrication and characterization of advanced materials, to present and discuss their latest findings. The proceedings also contain technical papers presented at two special symposia on biomaterials and magnesium technology. Contents: Advanced Metallics; Biomaterials; Advanced Ceramics; Intermetallics; Magnesium Technology; Metal Matrix Composites (MMC); Polymer and Composites; Powder Injection Molding. Readership: Mechanical and production engineers."
