Download or read book Advances in Materials Processing and Manufacturing Applications written by Amar Patnaik and published by Springer Nature. This book was released on 2021-06-22 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the International Conference on Advances in Materials Processing and Manufacturing Applications (iCADMA 2020), held on November 5–6, 2020, at Malaviya National Institute of Technology, Jaipur, India. iCADMA 2020 proceedings is divided into four topical tracks – Advanced Materials, Materials Manufacturing and Processing, Engineering Optimization and Sustainable Development, and Tribology for Industrial Application.
Download or read book Advanced Materials Processing and Manufacturing written by Yogesh Jaluria and published by Springer. This book was released on 2018-05-24 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on advanced processing of new and emerging materials, and advanced manufacturing systems based on thermal transport and fluid flow. It examines recent areas of considerable growth in new and emerging manufacturing techniques and materials, such as fiber optics, manufacture of electronic components, polymeric and composite materials, alloys, microscale components, and new devices and applications. The book includes analysis, mathematical modeling, numerical simulation and experimental study of processes for prediction, design and optimization. It discusses the link between the characteristics of the final product and the basic transport mechanisms and provides a foundation for the study of a wide range of manufacturing processes. Focuses on new and advanced methods of manufacturing and materials processing with traditional methods described in light of the new approaches; Maximizes reader understanding of the fundamentals of how materials change, what transport processes are involved, and how these can be simulated and optimized - concepts not covered elsewhere; Introduces new materials and applications in manufacturing and summarizes traditional processing methods, such as heat treatment, extrusion, casting, injection molding, and bonding, to show how they have evolved and how they could be used for meeting the challenges that we face today.
Download or read book Advanced Materials and Manufacturing Processes written by Amar Patnaik and published by CRC Press. This book was released on 2021-10-14 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses advanced materials and manufacturing processes with insights and overviews on tribology, automation, mechanical, biomedical, and aerospace engineering, as well as the optimization of industrial applications. The book explores the different types of composite materials while reporting on the design considerations and applications of each. Offering an overview of futuristic research areas, the book examines various engineering optimization and multi-criteria decision-making techniques and introduces a specific control framework used in analyzing processes. The book includes problem analyses and solving skills and covers different types of composite materials, their design considerations, and applications. This book is an informational resource for advanced undergraduate and graduate students, researchers, scholars, and field professionals, providing an update on the current advancements in the field of manufacturing processes.
Download or read book Advances in Laser Materials Processing written by J. R. Lawrence and published by Woodhead Publishing. This book was released on 2017-09-20 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Laser Materials Processing: Technology, Research and Application, Second Edition, provides a revised, updated and expanded overview of the area, covering fundamental theory, technology and methods, traditional and emerging applications and potential future directions. The book begins with an overview of the technology and challenges to applying the technology in manufacturing. Parts Two thru Seven focus on essential techniques and process, including cutting, welding, annealing, hardening and peening, surface treatments, coating and materials deposition. The final part of the book considers the mathematical modeling and control of laser processes. Throughout, chapters review the scientific theory underpinning applications, offer full appraisals of the processes described and review potential future trends. A comprehensive practitioner guide and reference work explaining state-of-the-art laser processing technologies in manufacturing and other disciplines Explores challenges, potential, and future directions through the continuous development of new, application-specific lasers in materials processing Provides revised, expanded and updated coverage
Download or read book Materials Processing and Manufacturing Science written by Rajiv Asthana and published by Elsevier. This book was released on 2006-01-09 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Materials Science in Manufacturing focuses on materials science and materials processing primarily for engineering and technology students preparing for careers in manufacturing. The text also serves as a useful reference on materials science for the practitioner engaged in manufacturing as well as the beginning graduate student. Integrates theoretical understanding and current practices to provide a resource for students preparing for advanced study or career in industry. Also serves as a useful resource to the practitioner who works with diverse materials and processes, but is not a specialist in materials science. This book covers a wider range of materials and processes than is customary in the elementary materials science books. This book covers a wider range of materials and processes than is customary in the elementary materials science books. * Detailed explanations of theories, concepts, principles and practices of materials and processes of manufacturing through richly illustrated text * Includes new topics such as nanomaterials and nanomanufacturing, not covered in most similar works * Focuses on the interrelationship between Materials Science, Processing Science, and Manufacturing Technology
Download or read book Advances in Materials and Processing Technologies written by M.S.J. Hashmi and published by Trans Tech Publications Ltd. This book was released on 2009-12-21 with total page 1360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Materials and Processing are important areas of research in Engineering Science and Technology, and require a critical focus on bridging the gap between researchers and engineers. Advanced materials and processing play an increasingly important role in the global economy and in daily life. Researchers and engineers strive to develop new devices and processes, using mathematical and analytical tools to create technologies to handle the rapidly expanding range of materials and manufacturing processes. The Advances in Materials and Processing Technologies conference series creates a stimulating environment for the research collaboration of scholars at the local, national and international levels, contributes to the collective development of a knowledge-based society and economy.
Download or read book Advances in Manufacturing Technology written by Rupinder Singh and published by CRC Press. This book was released on 2022-03-11 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This cross-disciplinary book transcends departmental, institutional, industrial, public, and research organizations and goes beyond global barriers to cover the integration of research, education, and manufacturing in advanced materials processing and characterization, including CAD-CAM, Finite Element Analysis (FEA), and smart manufacturing. Advances in Manufacturing Technology: Computational Materials Processing and Characterization focuses on the design of experiment-based computational models, which involves FEA along with an ergonomics-based design of tooling for both conventional and nonconventional manufacturing processes. It discusses research, work, and recent developments in the field of production manufacturing of any mechanical system. Case studies and solved numerical solutions are included at the end of each chapter for easy reading comprehension. The book is helpful to those working on new developments in the field of product manufacturing. It also acts as a first-hand source of information for academic scholars and commercial manufacturers as they make strategic manufacturing development plans.
Download or read book Advances in Manufacturing and Processing of Materials and Structures written by Yoseph Bar-Cohen and published by CRC Press. This book was released on 2018-09-03 with total page 845 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Manufacturing and Processing of Materials and Structures cover the latest advances in materials and structures in manufacturing and processing including additive and subtractive processes. It's intended to provide a compiled resource that reviews details of the advances that have been made in recent years in manufacturing and processing of materials and structures. A key development incorporated within this book is 3D printing, which is being used to produce complex parts including composites with odd shape fibers, as well as tissue and body organs. This book has been tailored for engineers, scientists and practitioners in different fields such as aerospace, mechanical engineering, materials science and biomedicine. Biomimetic principles have also been integrated. Features Provides the latest state-of-the art on different manufacturing processes, including a biomimetics viewpoint Offers broad coverage of advances in materials and manufacturing Written by chapter authors who are world-class researchers in their respective fields Provides in-depth presentation of the latest 3D and 4D technologies related to various manufacturing disciplines Provides substantial references in each chapter to enhance further study
Download or read book Additive Manufacturing written by T.S. Srivatsan and published by CRC Press. This book was released on 2015-09-25 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get Ready for the Future of Additive ManufacturingAdditive Manufacturing: Innovations, Advances, and Applications explores the emerging field of additive manufacturing (AM)-the use of 3D printing to make prototype parts on demand. Often referred to as the third industrial revolution, AM offers many advantages over traditional manufacturing. This pr
Download or read book Advances in Materials Processing and Manufacturing written by Akhmad Herman Yuwono and published by Trans Tech Publications Ltd. This book was released on 2013-09-04 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). This book is a collection of peer reviewed papers presented under Symposium of Materials and Metallurgy in the 13th International Conference on Quality in Research (QiR) 2013 held in Yogyakarta, Indonesia, June 25-28 2013. This special issue is devoted as useful dissemination to serve the need for exchange the knowledge, experience, review of the progress and recent developments in the broad field of materials engineering and manufacturing. Studies presented in this book cover the following topics: (i) Advanced and Composite Materials; (ii) Polymer and Ceramic Materials; (iii) Materials Manufacturing and Processes; (iv) Corrosion and Degradation of Materials; and (v) Extraction of Materials.
Download or read book Additive Manufacturing Materials Processes Quantifications and Applications written by Jing Zhang and published by Butterworth-Heinemann. This book was released on 2018-05-17 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing: Materials, Processes, Quantifications and Applications is designed to explain the engineering aspects and physical principles of available AM technologies and their most relevant applications. It begins with a review of the recent developments in this technology and then progresses to a discussion of the criteria needed to successfully select an AM technology for the embodiment of a particular design, discussing material compatibility, interfaces issues and strength requirements. The book concludes with a review of the applications in various industries, including bio, energy, aerospace and electronics. This book will be a must read for those interested in a practical, comprehensive introduction to additive manufacturing, an area with tremendous potential for producing high-value, complex, individually customized parts. As 3D printing technology advances, both in hardware and software, together with reduced materials cost and complexity of creating 3D printed items, these applications are quickly expanding into the mass market. Includes a discussion of the historical development and physical principles of current AM technologies Exposes readers to the engineering principles for evaluating and quantifying AM technologies Explores the uses of Additive Manufacturing in various industries, most notably aerospace, medical, energy and electronics
Download or read book Advances in Manufacturing Technology written by Rupinder Singh and published by CRC Press. This book was released on 2022-03-11 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This cross-disciplinary book transcends departmental, institutional, industrial, public, and research organizations and goes beyond global barriers to cover the integration of research, education, and manufacturing in advanced materials processing and characterization, including CAD-CAM, Finite Element Analysis (FEA), and smart manufacturing. Advances in Manufacturing Technology: Computational Materials Processing and Characterization focuses on the design of experiment-based computational models, which involves FEA along with an ergonomics-based design of tooling for both conventional and nonconventional manufacturing processes. It discusses research, work, and recent developments in the field of production manufacturing of any mechanical system. Case studies and solved numerical solutions are included at the end of each chapter for easy reading comprehension. The book is helpful to those working on new developments in the field of product manufacturing. It also acts as a first-hand source of information for academic scholars and commercial manufacturers as they make strategic manufacturing development plans.
Download or read book Advances in Materials Mechanics and Manufacturing written by Fakher Chaari and published by Springer Nature. This book was released on 2019-09-17 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge findings concerning characterization of material behavior, material modeling and simulation, and applications in the field of manufacturing. Based on the second International Conference on Advanced Materials Mechanics & Manufacturing, A3M2018, organized by the Laboratory of Mechanics, Modeling and Manufacturing (LA2MP) of the National School of Engineers of Sfax, Tunisia, the book covers a variety of topics, such as experimental analysis of material plasticity and fatigue, numerical simulation of material behavior, and optimization of manufacturing processes, such as cutting and injection, among others. It offers a timely snapshot on current research and applications, offering a bridge to facilitate communication and collaboration between academic and industrial researchers.
Download or read book New Materials Processing and Manufacturability written by R. Thanigaivelan and published by Wiley-Scrivener. This book was released on 2024-04-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Micro and Nano manufacturing Technologies written by Shrikrishna Nandkishor Joshi and published by Springer Nature. This book was released on 2021-10-01 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on the fundamentals and advancements in micro and nanomanufacturing technologies applied in the biomedical and biochemical domain. The contents of this volume provide comprehensive coverage of the physical principles of advanced manufacturing technologies and the know-how of their applications in the fabrication of biomedical devices and systems. The book begins by documenting the journey of miniaturization and micro-and nano-fabrication. It then delves into the fundamentals of various advanced technologies such as micro-wire moulding, 3D printing, lithography, imprinting, direct laser machining, and laser-induced plasma-assisted machining. It also covers laser-based technologies which are a promising option due to their flexibility, ease in control and application, high precision, and availability. These technologies can be employed to process several materials such as glass, polymers: polycarbonate, polydimethylsiloxane, polymethylmethacrylate, and metals such as stainless steel, which are commonly used in the fabrication of biomedical devices, such as microfluidic technology, optical and fiber-optic sensors, and electro-chemical bio-sensors. It also discusses advancements in various MEMS/NEMS based technologies and their applications in energy conversion and storage devices. The chapters are written by experts from the fields of micro- and nano-manufacturing, materials engineering, nano-biotechnology, and end-users such as clinicians, engineers, academicians of interdisciplinary background. This book will be a useful guide for academia and industry alike.
Download or read book Advances in Materials and Materials Processing written by Zheng Yi Jiang and published by Trans Tech Publications Ltd. This book was released on 2013-01-25 with total page 2754 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2012 International Conference on Advances in Materials and Manufacturing Processes (ICAMMP 2012), December 2223, 2012, Beihai, China. The 508 papers are grouped as follows: Chapter 1: Composites; Chapter 2: Micro/Nano Materials and Ceramic; Chapter 3: Polymers and Biomaterials; Chapter 4: Optical/Electronic/Magnetic Materials; Chapter 5: Chemical Materials and Technologies; Chapter 6: Energy Materials; Chapter 7: Iron and Steel; Chapter 8: Metal Alloy Materials; Chapter 9: Materials for Building and Structures; Chapter 10: Mechanics of Materials; Chapter 11: Environmental. Research, Friendly Materials and Recycling Waste Technologies; Chapter 12: Surface Engineering/Coatings; Chapter 13: Materials Forming; Chapter 14: Materials Machining; Chapter 15: Welding & Joining; Chapter 16: Laser Processing; Chapter 17: Casting and Solidification; Chapter 18: Geology and Mineral Processing.
Download or read book Recent Advances in Materials Processing and Characterization written by A. Arockiarajan and published by Springer Nature. This book was released on 2022-09-29 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Materials Processing and Characterization (ICMPC 2021). It particularly focuses on emerging trends related to advanced materials processing and characterization and current practices in industries. It discusses innovative manufacturing processes, standards and technologies used to broaden the knowledge of materials and also help to increase innovation and responsiveness to ever-increasing international needs, more in-depth studies of functionally graded materials/ tailor-made materials. This book will be a valuable resource for students, researchers, and professionals working in the various areas of materials science.
