Download or read book Advances in Materials and Systems Technologies II written by A.O. Akii Ibhadode and published by Trans Tech Publications Ltd. This book was released on 2009-02-20 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work comprises a selection of 109, peer-reviewed papers on Engineering Research and Development: Innovations. It addresses a number of the scientific issues underlying innovations in Materials and Systems research at the global level, while paying particular attention to possible processes that may permit the realization of the Millennium Development Goals (MDGs) of the United Nations in Developing Countries.The papers are grouped into chapters on: Construction and Structures; Electrical and Electronic Technology; Food and Agricultural Technology; Manufacturing Systems; Materials Processing; Oil and Gas; Renewable Energy; Systems Design and Analysis; Tools, Machines and Equipment; Waste Technology; and Water Engineering.
Download or read book Advances in Materials and Systems Technologies written by A.O. Akii Ibhadode and published by Trans Tech Publications Ltd. This book was released on 2007-06-15 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). The search for ever more novel materials, to meet the ever-increasing demands of modern civilization for building, operating and maintaining its infrastructures, will continue as long as mankind seeks to conserve the Earths resources, and yet keep up with the new technological challenges created by the latest inventions and discoveries.
Download or read book Advances in Materials and Processing Technologies written by M.S.J. Hashmi and published by Trans Tech Publications Ltd. This book was released on 2009-12-21 with total page 1360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Materials and Processing are important areas of research in Engineering Science and Technology, and require a critical focus on bridging the gap between researchers and engineers. Advanced materials and processing play an increasingly important role in the global economy and in daily life. Researchers and engineers strive to develop new devices and processes, using mathematical and analytical tools to create technologies to handle the rapidly expanding range of materials and manufacturing processes. The Advances in Materials and Processing Technologies conference series creates a stimulating environment for the research collaboration of scholars at the local, national and international levels, contributes to the collective development of a knowledge-based society and economy.
Download or read book Advances in Materials and Processing Technologies II written by M.S.J. Hashmi and published by Trans Tech Publications Ltd. This book was released on 2011-06-30 with total page 2000 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). Advanced Materials and Processing are important areas of research in Engineering Science and Technology, which have to focus on bridging the critical gap between researchers and engineers in order to shape the new world. Advanced Materials and Processing play an increasingly important role in the global economy and in daily life. Researchers and engineers strive to develop new devices and processes, using mathematical and analytical tools, in order to create technologies for a rapidly expanding range of materials and manufacturing processes. A large proportion of the present papers addressed current scientific research and provided solutions to industrial problems; thereby creating an environment of mutual interest to industry and academia. The papers are grouped into 10 chapters: 1. Forming Processes, 2. Casting, Joining and Related Processes, 3. Materials, 4. Materials Removal Processes, 5. High Energy Beam Removal Process, 6. Precision Engineering and Nano-Technology, 7. Surface Engineering, 8. Computer-Aided Engineering, 9. Green Manufacturing and Management, 10. Others. This comprehensive coverage will be much appreciated by readers.
Download or read book Advances in Materials and Systems Technologies IV written by A.O. Akii Ibhadode and published by Trans Tech Publications Ltd. This book was released on 2013-09-27 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). Collection of selected, peer reviewed papers from the Fourth International Conference on Engineering Research and Development (ICERD 2012), September 4-6, 2012, Benin City, Nigeria. The 82 papers are grouped as follows: Chapter 1: Construction and Structures; Chapter 2: Electrical and Electronic Technology; Chapter 3: Information and Communication Technology; Chapter 4: Machines and Equipment; Chapter 5: Materials Processing; Chapter 6: Oil and Gas; Chapter 7: Renewable Energy; Chapter 8: Systems Design and Analysis; Chapter 9: Water, Waste and Environment.
Download or read book Advances in Materials and Systems Technologies III written by A. O. Ibhadode and published by Trans Tech Publication. This book was released on 2012 with total page 861 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of Advanced Materials Research having the title, Advances in Materials and Systems Technologies III, is a collection of peer-reviewed papers selected from those presented at the 2010 International Conference on Engineering Research and Development: Advances in Engineering, Science and Technology (ICERD2010) held at the University of Benin, Nigeria on September 7-9th, 2010. The papers are divided into the chapters: Construction and Structures; Electrical and Electronic Technology; Information and Communication Technology; Manufacturing Systems; Materials Processing; Oil and Gas, Renewable Energy; Solid Minerals Technology; Systems Design and Analysis; Tools, Machines and Equipment; Water, Waste and Environment. The result is an up-to-date overview of the field.
Download or read book Advances in Manufacturing Technology written by Rupinder Singh and published by CRC Press. This book was released on 2022-03-11 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This cross-disciplinary book transcends departmental, institutional, industrial, public, and research organizations and goes beyond global barriers to cover the integration of research, education, and manufacturing in advanced materials processing and characterization, including CAD-CAM, Finite Element Analysis (FEA), and smart manufacturing. Advances in Manufacturing Technology: Computational Materials Processing and Characterization focuses on the design of experiment-based computational models, which involves FEA along with an ergonomics-based design of tooling for both conventional and nonconventional manufacturing processes. It discusses research, work, and recent developments in the field of production manufacturing of any mechanical system. Case studies and solved numerical solutions are included at the end of each chapter for easy reading comprehension. The book is helpful to those working on new developments in the field of product manufacturing. It also acts as a first-hand source of information for academic scholars and commercial manufacturers as they make strategic manufacturing development plans.
Download or read book Advances in Materials Science for Environmental and Energy Technologies written by Tatsuki Ohji and published by John Wiley & Sons. This book was released on 2012-11-05 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributed papers from the 2011 Materials Science and Technology symposia, this is a useful one-stop resource for understanding the most important issues in advances in materials science for environmental and energy technologies. Logically organized and carefully selected, the articles cover the themes of the symposia: Green Technologies for Materials Manufacturing and Processing; Materials Science Challenges for Nuclear Applications; Materials for Nuclear Waste Disposal and Environmental Cleanup; Energy Conversion/Fuel Cells; and Energy Storage: Materials, Systems and Applications.
Download or read book Advances in Laser Materials Processing written by J. R. Lawrence and published by Woodhead Publishing. This book was released on 2017-09-20 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Laser Materials Processing: Technology, Research and Application, Second Edition, provides a revised, updated and expanded overview of the area, covering fundamental theory, technology and methods, traditional and emerging applications and potential future directions. The book begins with an overview of the technology and challenges to applying the technology in manufacturing. Parts Two thru Seven focus on essential techniques and process, including cutting, welding, annealing, hardening and peening, surface treatments, coating and materials deposition. The final part of the book considers the mathematical modeling and control of laser processes. Throughout, chapters review the scientific theory underpinning applications, offer full appraisals of the processes described and review potential future trends. A comprehensive practitioner guide and reference work explaining state-of-the-art laser processing technologies in manufacturing and other disciplines Explores challenges, potential, and future directions through the continuous development of new, application-specific lasers in materials processing Provides revised, expanded and updated coverage
Download or read book Advanced Materials Science Technology in China A Roadmap to 2050 written by Ke Lu and published by Springer Science & Business Media. This book was released on 2010-08-09 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: As one of the eighteen field-specific reports comprising the comprehensive scope of the strategic general report of the Chinese Academy of Sciences, this sub-report addresses long-range planning for developing science and technology in the field of advanced materials science. They each craft a roadmap for their sphere of development to 2050. In their entirety, the general and sub-group reports analyze the evolution and laws governing the development of science and technology, describe the decisive impact of science and technology on the modernization process, predict that the world is on the eve of an impending S&T revolution, and call for China to be fully prepared for this new round of S&T advancement. Based on the detailed study of the demands on S&T innovation in China's modernization, the reports draw a framework for eight basic and strategic systems of socio-economic development with the support of science and technology, work out China's S&T roadmaps for the relevant eight basic and strategic systems in line with China's reality, further detail S&T initiatives of strategic importance to China's modernization, and provide S&T decision-makers with comprehensive consultations for the development of S&T innovation consistent with China's reality. Supported by illustrations and tables of data, the reports provide researchers, government officials and entrepreneurs with guidance concerning research directions, the planning process, and investment. Founded in 1949, the Chinese Academy of Sciences is the nation's highest academic institution in natural sciences. Its major responsibilities are to conduct research in basic and technological sciences, to undertake nationwide integrated surveys on natural resources and ecological environment, to provide the country with scientific data and consultations for government's decision-making, to undertake government-assigned projects with regard to key S&T problems in the process of socio-economic development, to initiate personnel training, and to promote China's high-tech enterprises through its active engagement in these areas.
Download or read book Green Materials and Advanced Manufacturing Technology written by Samson Jerold Samuel Chelladurai and published by CRC Press. This book was released on 2020-12-29 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes recent theoretical and practical advancements in green composite materials and advanced manufacturing technology. It provides important original and theoretical experimental results which use nonroutine technologies often unfamiliar to some readers and covers novel applications of more familiar experimental techniques and analyses of composite problems. Green Materials and Advanced Manufacturing Technology: Concepts and Applications provides insight and a better understanding into the development of green composite materials and advanced manufacturing technology used in various manufacturing sectors. It highlights recent trends in the fields of green composites, metal matrix composites, ceramic matrix composites, surface modification using laser cladding, types of dust collectors in waste management and recycling in industries, machinability studies of metals and composites using surface grinding, drilling, electrical discharge machining, joining of metals using friction stir welding, shielded metal arc welding, and linear friction welding. This book is written for engineering students, postgraduate students, research scholars, faculty members, and industry professionals who are engaged in green composite materials and development of advanced manufacturing technology.
Download or read book Advanced Materials and Systems for Electrochemical Technologies written by Mauro Coelho dos Santos and published by Nova Science Publishers. This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book concerns advanced materials for electrochemical technologies. Firstly, the focus concerns fuel cell devices in which state of the art materials for anodes in both fuel cells and biological fuel cells were carefully discussed. After that, novel sensors and biosensors were deeply described. Finally, the wastewater treatment using advanced oxidation processes was pointed out, taking into account anodes and/or cathodes evidencing materials and processes. Briefly, energy, bio-applications and environmental approaches were discussed using electrochemistry as the main tool"--
Download or read book Advances in Manufacturing Technology written by Rupinder Singh and published by CRC Press. This book was released on 2022-03-11 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This cross-disciplinary book transcends departmental, institutional, industrial, public, and research organizations and goes beyond global barriers to cover the integration of research, education, and manufacturing in advanced materials processing and characterization, including CAD-CAM, Finite Element Analysis (FEA), and smart manufacturing. Advances in Manufacturing Technology: Computational Materials Processing and Characterization focuses on the design of experiment-based computational models, which involves FEA along with an ergonomics-based design of tooling for both conventional and nonconventional manufacturing processes. It discusses research, work, and recent developments in the field of production manufacturing of any mechanical system. Case studies and solved numerical solutions are included at the end of each chapter for easy reading comprehension. The book is helpful to those working on new developments in the field of product manufacturing. It also acts as a first-hand source of information for academic scholars and commercial manufacturers as they make strategic manufacturing development plans.
Download or read book Advances in materials and systems technologies III selected peer reviewed papers from the 3rd International Conference on Engineering Research and Development Advances in Engineering Science and Technology ICERD 2010 September 7 9 2010 Benin City Nigeria written by A. O. Akii Ibhadode and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of Advanced Materials Research having the title, Advances in Materials and Systems Technologies III, is a collection of peer-reviewed papers selected from those presented at the 2010 International Conference on Engineering Research and Development: Advances in Engineering, Science and Technology (ICERD2010) held at the University of Benin, Nigeria on September 7-9th, 2010. The papers are divided into the chapters: Construction and Structures; Electrical and Electronic Technology; Information and Communication Technology; Manufacturing Systems; Materials Processing; Oil and Gas, Renewable Energy; Solid Minerals Technology; Systems Design and Analysis; Tools, Machines and Equipment; Water, Waste and Environment. The result is an up-to-date overview of the field. Review from Book News Inc.: This proceedings volume contains about 60 peer-reviewed papers from a September 2011 conference, grouped in sections on construction and structures, electrical and electronic technology, information and communication technology, manufacturing systems, and materials processing. Other major themes are oil and gas, renewable energy, solid materials technology, systems design and analysis, tools and equipment, and waste and the environment. A number of papers are devoted to alternative energy options, such as production of bio-diesel from palm kernel oil and groundnut oil, an indirect passive solar dryer, and design and testing of a mini-plant for conversion of organic waste to biogas. Other papers deal with rural energy and communication issues, such as rural mobile telephony, rural electrification in Nigeria, modeling declining incomes from non-renewable natural resources, and predicting telephone traffic congestion using multi-layer feedforward neural networks. Some other specific areas examined include small scale sugarcane juice extraction using a screw pressing system, computer-aided design of a power transmission screw, measurement of gamma radiation in automobile workshops, and a novel approach to subsea multiphase solid transport.
Download or read book Radiation Technology for Advanced Materials written by Guozhong Wu and published by Academic Press. This book was released on 2018-11-26 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radiation Technology for Advanced Materials presents a range of radiation technology applications for advanced materials. The book aims to bridge the gap between researchers and industry, describing current uses and future prospects. It describes the mature radiation processing technology used in preparing heat shrinkable materials and in wire and cable materials, giving commercial cases. In addition, the book illustrates future applications, including high-performance fibers, special self-lubricating materials, special ultra-fine powder materials, civil fibers, natural polymeric materials, battery separator membranes, special filtration materials and metallic nanomaterials. Chapters cover radiation technology in high-performance fiber and functional textiles, radiation crosslinking and typical applications, radiation crosslinking for polymer foaming material, radiation degradation and application, radiation emulsion polymerization, radiation effects of ionic liquids, radiation technology in advanced new materials, and future prospects. Presents a range of radiation technology applications and their application to advanced materials Covers the mature radiation processing technology used to prepare heat shrinkable materials and wire cable materials, describing real-world commercial applications Shows the promising application of radiation technology in preparing high-performance Si and carbon fibers Describes the radiation degradation/radiation effect used to prepare fine powder materials Discusses radiation modification and radiation grafting techniques used to synthesize materials, such as civil fibers, natural polymeric materials and others
Download or read book Materials in the New Millennium written by National Research Council and published by National Academies Press. This book was released on 2001-09-12 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the forum that was held by the National Materials Advisory Board at the National Academy of Sciences. The purpose of this forum was to bring the importance of materials to the attention of policy makers and to promote interactions between policy makers and the materials community. Four key themes were addressed: the critical role of materials in advancing technology and enhancing the nation's economy, security, and health, industrial and societal needs that will require materials development in the new millennium. Materials research areas with the greatest potential for meeting those needs, and federal and industrial research initiatives that can help the materials community meet those needs. To help focus this discussion, special sessions were convened to address the current and future roles of materials in four selected areas: information technology, health and biotechnology, national security, and energy and the environment.
Download or read book Materials Science and Engineering written by William D. Callister and published by . This book was released on 2020-09-11 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
