Download or read book Next Generation Materials and Processing Technologies written by Swarup Bag and published by Springer Nature. This book was released on 2021-06-13 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of Conference on Research and Developments in Material Processing, Modelling and Characterization (RDMPMC 2020). It highlights the new technologies developed in the generation of rational materials for various applications with tailored properties. It covers fundamental research in emerging materials which includes biomaterials, composites, ceramics, functionally graded materials, energy materials, thin film materials, nanomaterials, nuclear materials, intermetallic, high strength materials, structural materials, super alloys, shape memory alloys and thermally enhanced materials. It includes the numerical modeling and computer simulation to investigate the properties and structure of materials. Few of the most relevant manufacturing techniques highlighted in this book are welding, coating, additive manufacturing, laser-based manufacturing, advanced machining processes, casting, forming and micro and nanoscale manufacturing processes. Given its contents, this book is beneficial to students, researchers and industry professionals.

Download or read book Advancement in Materials Processing Technology written by Ranjeet Prasad and published by Springer Nature. This book was released on 2022-04-04 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the National Conference on Advancement in Materials Processing Technology (AMPT 2020). It covers the new trends in materials and mineral processing technologies along with an emphasis on engineering materials, composite materials, smart materials and nanomaterials. Topics covered include advanced, mineral processing, advanced processing, foundry technology, modelling and simulation, recycling and waste recovery. Given the contents, this book will be useful for researchers, engineers and professionals working in the areas of chemical, mining, metallurgical and mechanical engineering and associated fields.

Download or read book Advances in Materials and Processing Technologies XVI written by Zone Ching Lin and published by Trans Tech Publications Ltd. This book was released on 2014-05-07 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 16th International Conference on Advanced Materials and Processing Technologies (AMPT 2013), September 22-26, 2013, Taipei, Taiwan

Download or read book Advancements in Materials Processing Technology Volume 1 written by Rina Sahu and published by Springer Nature. This book was released on with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advancements in Materials Processing Technology Volume 2 written by Rina Sahu and published by Springer Nature. This book was released on with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Manufacturing and Processing of Materials and Structures written by Yoseph Bar-Cohen and published by CRC Press. This book was released on 2018-09-03 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Manufacturing and Processing of Materials and Structures cover the latest advances in materials and structures in manufacturing and processing including additive and subtractive processes. It's intended to provide a compiled resource that reviews details of the advances that have been made in recent years in manufacturing and processing of materials and structures. A key development incorporated within this book is 3D printing, which is being used to produce complex parts including composites with odd shape fibers, as well as tissue and body organs. This book has been tailored for engineers, scientists and practitioners in different fields such as aerospace, mechanical engineering, materials science and biomedicine. Biomimetic principles have also been integrated. Features Provides the latest state-of-the art on different manufacturing processes, including a biomimetics viewpoint Offers broad coverage of advances in materials and manufacturing Written by chapter authors who are world-class researchers in their respective fields Provides in-depth presentation of the latest 3D and 4D technologies related to various manufacturing disciplines Provides substantial references in each chapter to enhance further study

Download or read book Advances in Manufacturing Technology XVI NCMR 2002 written by Kai Cheng and published by John Wiley & Sons. This book was released on 2002-11-22 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Manufacturing Technology XVI provides a comprehensive collection of papers exploring the very latest developments in the field of manufacturing engineering and managment and incorporates the most up-to-date techniques. TOPICS COVERED INCLUDE: Business strategies process reengineering CAD/CAM and concurrent engineering E-manufacturing and virtual reality Engineering modelling and simulations Total quality management and metrology Intelligent systems. robotics and automation Lean and agiel manufacturing Machining process and tooling Operations management Process control and condition monitoring Covering all aspects of manufacturing engineering, systems, and management this volume will be of great interest to those wanting to keep abreast pf current research and those involved in the planning stages in this area of engineering.

Download or read book Advances in Manufacturing Technology written by Rupinder Singh and published by CRC Press. This book was released on 2022-03-11 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This cross-disciplinary book transcends departmental, institutional, industrial, public, and research organizations and goes beyond global barriers to cover the integration of research, education, and manufacturing in advanced materials processing and characterization, including CAD-CAM, Finite Element Analysis (FEA), and smart manufacturing. Advances in Manufacturing Technology: Computational Materials Processing and Characterization focuses on the design of experiment-based computational models, which involves FEA along with an ergonomics-based design of tooling for both conventional and nonconventional manufacturing processes. It discusses research, work, and recent developments in the field of production manufacturing of any mechanical system. Case studies and solved numerical solutions are included at the end of each chapter for easy reading comprehension. The book is helpful to those working on new developments in the field of product manufacturing. It also acts as a first-hand source of information for academic scholars and commercial manufacturers as they make strategic manufacturing development plans.

Download or read book Advances in Materials Processing Technologies written by Mariano Marcos and published by Trans Tech Publications. This book was released on 2006 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing can be considered to be the most wide-ranging, interdisciplinary and sometimes-controversial branch of Engineering. It is even sometimes difficult to define it concisely, but everybody recognises its contributions.

Download or read book Proceedings of 11th International Conference on Advanced Materials Processing 2017 written by ConferenceSeries and published by ConferenceSeries. This book was released on with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: September 7-8 2017 Edinburgh, Scotland Key Topics : Advanced Materials Engineering, Advanced Ceramics and Composite Materials, Polymers Science and Engineering, Advancement in Nanomaterials Science And Nanotechnology, Metals, Metallurgy and Materials, Optical, Electronic and Magnetic Materials, Advanced Biomaterials, Bio devices & Tissue Engineering, Materials for Energy application& Energy storage, Carbon Based Nanoscale Materials, Entrepreneurs Investment Meet, Materials Processing and characterization, Processing and Fabrication of Advanced Materials, Emerging Areas of Materials Science, Materials Based Engineering Design and Control, Materials Engineering and Performance, Materials Science and Engineering, Needs, Priorities and Opportunities For Materials, Material Properties at High Temperature Applications, Coatings and Surface Engineering, Functional Materials, Materials For Engineering and Environmental Sustainability,

Download or read book 9th International Scientific Conference on Advances in Mechanical Engineering written by Tamás Mankovits and published by Trans Tech Publications Ltd. This book was released on 2024-09-30 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected peer-reviewed extended articles based on abstracts presented at the 9th International Scientific Conference on Advances in Mechanical Engineering (ISCAME 2023) Aggregated Book

Download or read book Advanced Materials and Processing 2010 written by Y. F. Zhang and published by World Scientific. This book was released on 2011 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings cover the latest research in advanced materials such as design, synthesis and development of new materials, processing technology for new materials, and modeling and simulation of materials processing.

Download or read book Proceedings of the 8th Pacific Rim International Conference on Advanced Materials and Processing PRICM 8 written by FernD.S. Marquis and published by Springer. This book was released on 2017-03-21 with total page 3431 pages. Available in PDF, EPUB and Kindle. Book excerpt: PRICM-8 features the most prominent and largest-scale interactions in advanced materials and processing in the Pacific Rim region. The conference is unique in its intrinsic nature and architecture which crosses many traditional discipline and cultural boundaries. This is a comprehensive collection of papers from the 15 symposia presented at this event.

Download or read book Advanced Materials and Process Technology for Mechanical Failure Prevention written by Mechanical Failures Prevention Group. Meeting and published by . This book was released on 1994 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Solidification and Crystallization written by Dieter M. Herlach and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current interest in research of solidification of melts is focussed to understand crystal nucleation and crystal growth. They determine the solidified product with its physical properties. A detailed description of these processes lead to the development and validation of physical models, which may form the basis of quantitative modelling of solidification routes in e.g. casting and foundry processes in order to develop a predictive capability in the design of materials during solidification. This book, based on a symposium held at EUROMAT 2003 aims to gives an overview on current developments in the research of solidification and crystallisation of liquids. The materials of interest range from metals and their alloys over semiconductors and isolators to organic substances.

Download or read book Advanced Materials Processing and Manufacturing written by Amogelang Sylvester Bolokang and published by CRC Press. This book was released on 2023-10-02 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the operations and industrial processes related to the production of advanced materials including ingot and powder metallurgy processing routes. It outlines the deformation processing mechanisms inducing failure at both ambient and high temperatures. Further, it embodies practical knowledge and engineering mechanisms of traditional and unorthodox material disposal approaches, concurrently with gear cutting/ manufacturing and computer numerically controlled machining. The surface fusion of metals in the production of coatings via the process of laser cladding is also covered. Features: Covers novel and multi-variety techniques of materials processing and manufacturing. Reports on the significant variables of the processes and basic operations of advanced materials. Discusses fundamental and engineering machining analysis. Includes novel fabrication of TiAl alloys using both powder and ingot metallurgy routes. Enables critical thinking through technical problem solving of local service manufacturers. This book is aimed at researchers and graduate students in materials and manufacturing engineering.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: