Download or read book Lasers written by Hans Joachim Eichler and published by Springer. This book was released on 2018-11-19 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of laser sources and their applications in various fields of science, industry, and technology. After an introduction to the basics of laser physics, different laser types and materials for lasers are summarized in the context of a historical survey, outlining the evolution of the laser over the past five decades. This includes, amongst other aspects, gas lasers, excimer lasers, the wide range of solid-state and semiconductor lasers, and femtosecond and other pulsed lasers where particular attention is paid to high-power sources. Subsequent chapters address related topics such as laser modulation and nonlinear frequency conversion. In closing, the enormous importance of the laser is demonstrated by highlighting its current applications in everyday life and its potential for future developments. Typical applications in advanced material processing, medicine and biophotonics as well as plasma and X-ray generation for nanoscale lithography are discussed. The book provides broad and topical coverage of laser photonics and opto-electronics, focusing on significant findings and recent advances rather than in-depth theoretical studies. Thus, it is intended not only for university students and engineers, but also for scientists and professionals applying lasers in biomedicine, material processing and everyday consumer products. Further, it represents essential reading for engineers using or developing high-power lasers for scientific or industrial applications.
Download or read book Advances in Lasers and Applications written by D.M. Finlayson and published by Taylor & Francis. This book was released on 1999-01-01 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Lasers and Applications opens with tutorial reviews of the underpinning science of diode pumped lasers, optical parametric oscillators, and ultrafast pulse generation. The book proceeds to the more specialized areas of waveguide lasers, ultrafast parametric amplification, visible solid-state lasers, materials, and diode pumps. The final sections present the applications of these sources to medicine, remote sensing and ranging, materials processing, and the widening set of applications for ultrashort pulses.
Download or read book Advances in Laser Materials Processing written by J. R. Lawrence and published by Woodhead Publishing. This book was released on 2017-09-20 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Laser Materials Processing: Technology, Research and Application, Second Edition, provides a revised, updated and expanded overview of the area, covering fundamental theory, technology and methods, traditional and emerging applications and potential future directions. The book begins with an overview of the technology and challenges to applying the technology in manufacturing. Parts Two thru Seven focus on essential techniques and process, including cutting, welding, annealing, hardening and peening, surface treatments, coating and materials deposition. The final part of the book considers the mathematical modeling and control of laser processes. Throughout, chapters review the scientific theory underpinning applications, offer full appraisals of the processes described and review potential future trends. A comprehensive practitioner guide and reference work explaining state-of-the-art laser processing technologies in manufacturing and other disciplines Explores challenges, potential, and future directions through the continuous development of new, application-specific lasers in materials processing Provides revised, expanded and updated coverage
Download or read book Advances in Lasers and Applications written by D.M. Finlayson and published by CRC Press. This book was released on 2021-09-28 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Lasers and Applications opens with tutorial reviews of the underpinning science of diode pumped lasers, optical parametric oscillators, and ultrafast pulse generation. The book proceeds to the more specialized areas of waveguide lasers, ultrafast parametric amplification, visible solid-state lasers, materials, and diode pumps. The final sections present the applications of these sources to medicine, remote sensing and ranging, materials processing, and the widening set of applications for ultrashort pulses.
Download or read book Advances in the Application of Lasers in Materials Science written by Paolo M. Ossi and published by . This book was released on 2018 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers recent advances and progress in understanding both the fundamental science of lasers interactions in materials science, as well as a special emphasis on emerging applications enabled by the irradiation of materials by pulsed laser systems. The different chapters illustrate how, by careful control of the processing conditions, laser irradiation can result in efficient material synthesis, characterization, and fabrication at various length scales from atomically-thin 2D materials to microstructured periodic surface structures. This book serves as an excellent resource for all who employ lasers in materials science, spanning such different disciplines as photonics, photovoltaics, and sensing, to biomedical applications.
Download or read book Laser Processing of Materials written by Peter Schaaf and published by Springer Science & Business Media. This book was released on 2010-07-28 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser materials processing has made tremendous progress and is now at the forefront of industrial and medical applications. The book describes recent advances in smart and nanoscaled materials going well beyond the traditional cutting and welding applications. As no analytical methods are described the examples are really going into the details of what nowadways is possible by employing lasers for sophisticated materials processing giving rise to achievements not possible by conventional materials processing.
Download or read book Advances in Solid State Lasers written by Mikhail Grishin and published by BoD – Books on Demand. This book was released on 2010-02-01 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Invention of the solid-state laser has initiated the beginning of the laser era. Performance of solid-state lasers improved amazingly during five decades. Nowadays, solid-state lasers remain one of the most rapidly developing branches of laser science and become an increasingly important tool for modern technology. This book represents a selection of chapters exhibiting various investigation directions in the field of solid-state lasers and the cutting edge of related applications. The materials are contributed by leading researchers and each chapter represents a comprehensive study reflecting advances in modern laser physics. Considered topics are intended to meet the needs of both specialists in laser system design and those who use laser techniques in fundamental science and applied research. This book is the result of efforts of experts from different countries. I would like to acknowledge the authors for their contribution to the book. I also wish to acknowledge Vedran Kordic for indispensable technical assistance in the book preparation and publishing.
Download or read book Tunable Laser Applications written by F.J. Duarte and published by CRC Press. This book was released on 2016-02-22 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Broadly tunable lasers continue to have a tremendous impact in many and diverse fields of science and technology. From a renaissance in laser spectroscopy to Bose-Einstein condensation, the one nexus is the tunable laser. Tunable Laser Applications describes the physics and architectures of widely applied tunable laser sources. Fully updated and ex
Download or read book Organic Lasers written by Marco Anni and published by CRC Press. This book was released on 2018-05-24 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past 30 years, organic conjugated molecules have received a lot of attention in research because of their unique combination of active properties typical of semiconductors and the technological appeal typical of plastic materials. Among the different applications proposed for organic materials, organic lasers are quickly approaching the performance required in real devices, while research on novel active materials is still ongoing. The book covers the basic aspects of the measurement techniques of optical gain and amplified spontaneous emission (ASE) in organic films as well as the photophysics of organic materials that can be understood using ASE measurements. It reviews the recent advances in the development of new active materials for organic lasers as well as the actual state of the art of scattering-assisted random lasers and of strongly coupled organic microcavities, both promising interesting developments in the near future. Finally, it gives a detailed review of the state of the art of the organic lasers actually closest to real applications, namely external cavity lasers and distributed feedback lasers. The book is unique that it covers basic aspects, technological aspects, and systems, which are still a subject of basic science research.
Download or read book Laser Ablation written by Carola Bellucci and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to their unique flexibility and high reproducibility, lasers have been traditionally used in processes such as cutting, drilling, machining, welding or cladding. In recent years, with the development of ultrafast laser sources, (ie: laser sources emitting pulses with durations ranging from picoseconds to femtoseconds), lasers also emerged as a new and promising tool for the texturing of virtually all kinds of surfaces. In Chapter One, a brief overview of the lasers and techniques utilised in micro- and nano-surface modifications is presented, followed by a detailed discussion of the surface chemistry and topography effect on bacteria aggregation and adhesion. Also, the role of the laser-induced superficial patterns on the response and sensitivity of bio-implants will be explored in depth. Chapter Two reports on cardiovascular laser application by using the open-irrigated ELMA catheter RytmoLas as an intriguing alternative for catheter ablation of arrhythmias. Chapter Three describes a novel feature designed for ELAI in which different colouration codes for the different metals are applied, enabling a good regional allocation of a specific metal within the tissues. Chapter Four focuses on laser ablation processing of metallic and polymeric thin films used in microelectromechanical systems technology for the fabrication of microfluidic devices with integrated electrodes on printed circuit boards (PCB-MEMS). Chapter Five presents typical micro and nanotextured surfaces created by direct irradiation under stationary and non-stationary conditions and the mechanisms behind their development and growth are discussed. Chapter Six describes a novel three-dimensional (3-D) fabrication process of micro-scale shell resonator made of single-crystal diamond (SCD). Chapter Seven discusses the data about structural and morphological characteristics of nano-sized transition-metal oxides of zirconium and molybdenum produced by laser ablation in water.
Download or read book Laser Additive Manufacturing written by Milan Brandt and published by Woodhead Publishing. This book was released on 2016-09-01 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Additive Manufacturing: Materials, Design, Technologies, and Applications provides the latest information on this highly efficient method of layer-based manufacturing using metals, plastics, or composite materials. The technology is particularly suitable for the production of complex components with high precision for a range of industries, including aerospace, automotive, and medical engineering. This book provides a comprehensive review of the technology and its range of applications. Part One looks at materials suitable for laser AM processes, with Part Two discussing design strategies for AM. Parts Three and Four review the most widely-used AM technique, powder bed fusion (PBF) and discuss other AM techniques, such as directed energy deposition, sheet lamination, jetting techniques, extrusion techniques, and vat photopolymerization. The final section explores the range of applications of laser AM. Provides a comprehensive one-volume overview of advances in laser additive manufacturing Presents detailed coverage of the latest techniques used for laser additive manufacturing Reviews both established and emerging areas of application
Download or read book Advanced Lasers written by Oleksiy Shulika and published by Springer. This book was released on 2015-04-28 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting a blend of applied and fundamental research in highly interdisciplinary subjects of rapidly developing areas, this book contains contributions on the frontiers and hot topics of laser physics, laser technology and laser engineering, and covers a wide range of laser topics, from all-optical signal processing and chaotic optical communication to production of superwicking surfaces, correction of extremely high-power beams, and generation of ultrabroadband spectra. It presents both review-type contributions and well researched and documented case studies, and is intended for graduate students, young scientist, and emeritus scientist working/studying in laser physics, optoelectronics, optics, photonics, and adjacent areas. The book contains both experimental and theoretical studies, as well as combinations of these two, which is known to be a most useful and interesting form of reporting scientific results, allowing students to really learn from each contribution. The book contains over 130 illustrations.
Download or read book Laser Sources and Applications written by A. Miller and published by CRC Press. This book was released on 1997-01-01 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent years have witnessed rapid advances in the development of solid state, fiber, semiconductor, and parametric sources of coherent radiation, which are opening up new opportunities for laser applications. Laser Sources and Applications provides a tutorial introduction to the basic principles of these developments at a level suitable for postgraduate research students and others with a basic knowledge of lasers and nonlinear optics. Encompassing both the physics and engineering aspects of the field, the book covers the nature of nonlinear optical interactions; solid state, fiber, and semiconductor lasers; optical parametric oscillators; and ultrashort pulse generation and applications. It also explores applications of current interest, such as electromagnetically induced transparency, atomic trapping, and soliton optical communications.
Download or read book Advances in High Power Fiber and Diode Laser Engineering written by Ivan Divliansky and published by Institution of Engineering and Technology. This book was released on 2019-12-30 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in High-Power Fiber and Diode Laser Engineering provides an overview of recent research trends in fiber and diode lasers and laser systems engineering. In recent years, many new fiber designs and fiber laser system strategies have emerged, targeting the mitigation of different problems which occur when standard optical fibers are used for making high-power lasers. Simultaneously, a lot of attention has been put to increasing the brightness and the output power of laser diodes. Both of these major laser development directions continue to advance at a rapid pace with the sole purpose of achieving higher power while having excellent beam quality. The book begins by introducing the principles of diode lasers and methods for improving their brightness. Later chapters cover quantum cascade lasers, diode pumped high power lasers, high average power LMA fiber amplifiers, high-power fiber lasers, beam combinable kilowatt all-fiber amplifiers, and applications of 2 μm thulium fiber lasers and high-power GHz linewidth diode lasers. Written by a team of authors with experience in academia and industrial research and development, and brought together by an expert editor, this book will be of use to anyone interested in laser systems development at the laboratory or commercial scale.
Download or read book Lasers for Medical Applications written by Helena Jelínková and published by Elsevier. This book was released on 2013-09-30 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lasers have a wide and growing range of applications in medicine. Lasers for Medical Applications summarises the wealth of recent research on the principles, technologies and application of lasers in diagnostics, therapy and surgery. Part one gives an overview of the use of lasers in medicine, key principles of lasers and radiation interactions with tissue. To understand the wide diversity and therefore the large possible choice of these devices for a specific diagnosis or treatment, the respective types of the laser (solid state, gas, dye, and semiconductor) are reviewed in part two. Part three describes diagnostic laser methods, for example optical coherence tomography, spectroscopy, optical biopsy, and time-resolved fluorescence polarization spectroscopy. Those methods help doctors to refine the scope of involvement of the particular body part or, for example, to specify the extent of a tumor. Part four concentrates on the therapeutic applications of laser radiation in particular branches of medicine, including ophthalmology, dermatology, cardiology, urology, gynecology, otorhinolaryngology (ORL), neurology, dentistry, orthopaedic surgery and cancer therapy, as well as laser coatings of implants. The final chapter includes the safety precautions with which the staff working with laser instruments must be familiar. With its distinguished editor and international team of contributors, this important book summarizes international achievements in the field of laser applications in medicine in the past 50 years. It provides a valuable contribution to laser medicine by outstanding experts in medicine and engineering. Describes the interaction of laser light with tissue Reviews every type of laser used in medicine: solid state, gas, dye and semiconductor Describes the use of lasers for diagnostics
Download or read book Medical Applications of Lasers written by D.R. Vij and published by Springer Science & Business Media. This book was released on 2002-02-28 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: A careful review of the literature covering various aspects of applications of lasers in science and technology reveals that lasers are being applied very widely throughout the entire gamut of physical medicine. After surveying the current developments taking place in the field of medical applications of lasers, it was considered appropriate to bring together these efforts of international research scientists and experts into one volume. It is with this aim that the editors have prepared this volume which brings current research and recent developments to the attention of a wide spectrum of readership associated with hospitals, medical institutions and universities world wide, including also the medical instrument industry. Both teachers and students in the medical faculties will especially find this compendium quite useful. This book is comprised of eleven chapters. All of the important medical applications of lasers are featured. The editors have made every effort that individual chapters are self-contained and written by experts. Emphasis has been placed on straight and simple presentation of the subject matter so that even the new entrants into the field will find the book of value.
Download or read book Opportunities in Intense Ultrafast Lasers written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2018-03-03 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: The laser has revolutionized many areas of science and society, providing bright and versatile light sources that transform the ways we investigate science and enables trillions of dollars of commerce. Now a second laser revolution is underway with pulsed petawatt-class lasers (1 petawatt: 1 million billion watts) that deliver nearly 100 times the total world's power concentrated into a pulse that lasts less than one-trillionth of a second. Such light sources create unique, extreme laboratory conditions that can accelerate and collide intense beams of elementary particles, drive nuclear reactions, heat matter to conditions found in stars, or even create matter out of the empty vacuum. These powerful lasers came largely from U.S. engineering, and the science and technology opportunities they enable were discussed in several previous National Academies' reports. Based on these advances, the principal research funding agencies in Europe and Asia began in the last decade to invest heavily in new facilities that will employ these high-intensity lasers for fundamental and applied science. No similar programs exist in the United States. Opportunities in Intense Ultrafast Lasers assesses the opportunities and recommends a path forward for possible U.S. investments in this area of science.
