Download or read book Advances in High Temperature Structural Materials and Protective Coatings written by A. K. Koul and published by Institute for Aerospace Research. This book was released on 1994 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coatings for High Temperature Structural Materials written by National Research Council and published by National Academies Press. This book was released on 1996-05-13 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book assesses the state of the art of coatings materials and processes for gas-turbine blades and vanes, determines potential applications of coatings in high-temperature environments, identifies needs for improved coatings in terms of performance enhancements, design considerations, and fabrication processes, assesses durability of advanced coating systems in expected service environments, and discusses the required inspection, repair, and maintenance methods. The promising areas for research and development of materials and processes for improved coating systems and the approaches to increased coating standardization are identified, with an emphasis on materials and processes with the potential for improved performance, quality, reproducibility, or manufacturing cost reduction.
Download or read book Nickel Cobalt and Their Alloys written by Joseph R. Davis and published by ASM International. This book was released on 2000-01-01 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive guide to the compositions, properties, processing, performance, and applications of nickel, cobalt, and their alloys. It includes all of the essential information contained in the ASM Handbook series, as well as new or updated coverage in many areas in the nickel, cobalt, and related industries.
Download or read book High Temperature Coatings written by Sudhangshu Bose and published by Butterworth-Heinemann. This book was released on 2017-11-27 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Coatings, Second Edition, demonstrates how to counteract the thermal effects of rapid corrosion and degradation of exposed materials and equipment that can occur under high operating temperatures. This is the first true practical guide on the use of thermally protective coatings for high-temperature applications, including the latest developments in materials used for protective coatings. It covers the make-up and behavior of such materials under thermal stress and the methods used for applying them to specific types of substrates, as well as invaluable advice on inspection and repair of existing thermal coatings. With his long experience in the aerospace gas turbine industry, the author has compiled the very latest in coating materials and coating technologies, as well as hard-to-find guidance on maintaining and repairing thermal coatings, including appropriate inspection protocols. The book is supplemented with the latest reference information and additional support to help readers find more application- and industry-type coatings specifications and uses. Offers an overview of the underlying fundamental concepts of thermally-protective coatings, including thermodynamics, energy kinetics, crystallography and equilibrium phases Covers essential chemistry and physics of underlying substrates, including steels, nickel-iron alloys, nickel-cobalt alloys and titanium alloys Provides detailed guidance on a wide variety of coating types, including those used against high temperature corrosion and oxidative degradation and thermal barrier coatings
Download or read book Coatings for High Temperature Structural Materials written by National Research Council and published by National Academies Press. This book was released on 1996-06-13 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book assesses the state of the art of coatings materials and processes for gas-turbine blades and vanes, determines potential applications of coatings in high-temperature environments, identifies needs for improved coatings in terms of performance enhancements, design considerations, and fabrication processes, assesses durability of advanced coating systems in expected service environments, and discusses the required inspection, repair, and maintenance methods. The promising areas for research and development of materials and processes for improved coating systems and the approaches to increased coating standardization are identified, with an emphasis on materials and processes with the potential for improved performance, quality, reproducibility, or manufacturing cost reduction.
Download or read book High temperature Inorganic Coatings written by John Huminik and published by . This book was released on 1963 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Corrosion of Advanced Materials and Protective Coatings written by Yahachi Saito and published by Elsevier. This book was released on 2012-12-02 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together the experience of specialists on High Temperature Corrosion. The 43 papers discuss topics related to the high temperature corrosion of engineering alloys, ceramics and protective coatings. The papers will be a useful and dynamic tool for those wishing to increase their knowledge of High Temperature Corrosion, as well as providing a guide to recent literature in this field.
Download or read book Production Properties and Applications of High Temperature Coatings written by Pakseresht, Amir Hossein and published by IGI Global. This book was released on 2018-01-12 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat resistant layers are meant to withstand high temperatures while also protecting against all types of corrosion and oxidation. Therefore, the micro-structure and behavior of such layers is essential in understanding the functionality of these materials in order to make improvements. Production, Properties, and Applications of High Temperature Coatings is a critical academic publication which examines the methods of creation, characteristics, and behavior of materials used in heat resistant layers. Featuring coverage on a wide range of topics such as, thermal spray methods, sol-gel coatings, and surface nanoengineering, this book is geared toward students, academicians, engineers, and researchers seeking relevant research on the methodology and materials for producing effective heat resistant layers.
Download or read book Developments in High Temperature Corrosion and Protection of Materials written by W Gao and published by Elsevier. This book was released on 2008-04-09 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: High temperature corrosion is a phenomenon that occurs in components that operate at very high temperatures, such as gas turbines, jet engines and industrial plants. Engineers are constantly striving to understand and prevent this type of corrosion. This book examines the latest developments in the understanding of high temperature corrosion processes and protective oxide scales and coatings. Part one looks at high temperature corrosion. Chapters cover diffusion and solid state reactions, external and internal oxidation of alloys, metal dusting corrosion, tribological degradation, hot corrosion, and oxide scales on hot-rolled steel strips. Modern techniques for analysing high temperature oxidation and corrosion are also discussed. Part two discusses methods of protection using ceramics, composites, protective oxide scales and coatings. Chapters focus on layered ternary ceramics, alumina scales, Ti-Al intermetallic compounds, metal matrix composites, chemical vapour deposited silicon carbide, nanocrystalline coatings and thermal barrier coatings. Part three provides case studies illustrating some of the challenges of high temperature corrosion to industry and how they can be overcome. Case studies include the petrochemical industry, modern incinerators and oxidation processing of electronic materials. This book is a valuable reference tool for engineers who develop heat resistant materials, mechanical engineers who design and maintain high temperature equipment and plant, and research scientists and students who study high temperature corrosion and protection of materials. Describes the latest developments in understanding high temperature corrosion Presents the latest research by the leading innovators from around the globe Case studies are provided to illustrate key points
Download or read book Machining Difficult to Cut Materials written by Hossam A. Kishawy and published by Springer. This book was released on 2018-08-09 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focus on the challenges faced by cutting materials with superior mechanical and chemical characteristics, such as hardened steels, titanium alloys, super alloys, ceramics and metal matrix composites. Aspects such as costs and appropriate machining strategy are mentioned. The authors present the characteristics of the materials difficult to cut and comment on appropriate cutting tools for their machining. This book also serves as a reference tool for manufacturers working in industry.
Download or read book Superalloys written by Blaine Geddes and published by ASM International. This book was released on 2010-01-01 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This practical guide provides an introduction for understanding the compositional complexity of superalloys superalloy and the wide range of alloys developed for specific applications. The basics of alloying, strengthening mechanisms, and structure of superalloys are explained in optimizing particular mechanical properties, oxidation/corrosion resistance, and manufacturing characteristics such as castability, forgeability, and weldability."--Publisher's description.
Download or read book Recrystallization written by Krzysztof Sztwiertnia and published by BoD – Books on Demand. This book was released on 2012-03-07 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recrystallization shows selected results obtained during the last few years by scientists who work on recrystallization-related issues. These scientists offer their knowledge from the perspective of a range of scientific disciplines, such as geology and metallurgy. The authors emphasize that the progress in this particular field of science is possible today thanks to the coordinated action of many research groups that work in materials science, chemistry, physics, geology, and other sciences. Thus, it is possible to perform a comprehensive analysis of the scientific problem. The analysis starts from the selection of appropriate techniques and methods of characterization. It is then combined with the development of new tools in diagnostics, and it ends with modeling of phenomena.
Download or read book The Microstructure of Superalloys written by Madeleine Durand-Charre and published by CRC Press. This book was released on 1998-02-23 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents all the main aspects of the microstructure of nickel-base superalloys, and includes micrographs chosen from among a large range of commercial and academic alloys, from the as-cast product to in-situ components, worn from in-service use. Including more than 100 illustrations, the text explains all the transformation mechanisms involved in the origination (creation) of microstructures during solidification or heat treatments (crystallization paths, segregation, crystal orientation, precipitation, TCP, coarsening and rafting, etc.). It includes up-to-date information and data such as phase diagrams, crystallographic structures, and relationships with functional properties. Nearly 300 references provide a key to further investigation.
Download or read book Advanced Ceramic Coatings and Materials for Extreme Environments II Volume 33 Issue 3 written by Dongming Zhu and published by John Wiley & Sons. This book was released on 2012-12-10 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exploring advanced ceramic coatings and ultra-high temperature ceramic materials, this issue brings readers up-to-date with important new and emerging findings, materials, and applications. The nineteen papers in this issue originate from two symposia and one focused session held in January 2012, during the 36th International Conference on Advanced Ceramics and Composites (ICACC). With contributions from leading ceramics and materials researchers from around the world, this issue explores the latest advances and key challenges in advanced thermal and environmental coating processing and characterizations, advanced wear corrosion-resistant, nanocomposite, and multi-functional coatings, thermal protection systems, and more.
Download or read book ASM Specialty Handbook written by Joseph R. Davis and published by ASM International. This book was released on 1997-01-01 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials covered include carbon, alloy and stainless steels; alloy cast irons; high-alloy cast steels; superalloys; titanium and titanium alloys; refractory metals and alloys; nickel-chromium and nickel-thoria alloys; structural intermetallics; structural ceramics, cermets, and cemented carbides; and carbon-composites.
Download or read book Materials and Coatings to Resist High Temperature Corrosion written by Derek Roy Holmes and published by . This book was released on 1978 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High temperature Structural Materials written by Robert Cahn and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conventional materials, such as nickel based alloys, will not be able to match the required performance specifications for the future generation of high temperature materials. This book reviews the characteristics and potential of a wide range of candidate superalloy replacements, such as ceramics, intermetallics, and their composites. Particular attention is devoted to the problems of processing and design with these materials.
