Download or read book Advances in Thermal Design of Heat Exchangers written by Eric M. Smith and published by . This book was released on 2005 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary objective in any engineering design process has to be the elimination of uncertainties. In thermal design of heat exchangers there are presently many stages in which assumptions in mathematical solution of the design problem are being made. Accumulation of these assumptions may introduce variations in design. The designer needs to understand where these inaccuracies may arise, and strive to eliminate as many sources of error as possible by choosing design configurations that avoid such problems at source. In this exciting text, the author adopts a numerical approach to the thermal design of heat exchangers, extending the theory of performance evaluation to the point where computer software may be written. The first few chapters are intended to provide a development from undergraduate studies regarding the fundamentals of heat exchanger theory and the concepts of direct sizing. Later chapters on transient response of heat exchangers and on the related single-blow method of obtaining experimental results should also interest the practicing engineer. Theory is explained simply, with the intention that readers can develop their own approach to the solution of particular problems. This book is an indispensable reference text for higher level (post-graduate) students and practicing engineers, researchers and academics in the field of heat exchangers. Includes a whole new chapter on exergy and pressure loss Provides in the first few chapters a development from undergraduate studies regarding the fundamentals of heat exchanger theory, and continues in later chapters to discuss issues such as the transient response of heat exchangers and the related single-blow method of obtaining experimental results that are also of interest to the practicing engineer. Adopts a numerical approach to the thermal design of heat exchangers, extending the theory of performance evaluation to the point where computer software may be written Contributes to the development of the direct ‘sizing’ approach in thermal design of the exchanger surface Explains theory simply, with the objective that the reader can develop their own approach to the solution of particular problems

Download or read book Thermal Design of Heat Exchangers A Numerical Approach written by Eric M. Smith and published by . This book was released on 1997 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is unique in adopting a numerical approach to the thermal design of heat exchangers. The computation of mean temperature difference, with accommodation of longitudinal conduction effects, makes full optimisation of the exchanger core possible. Sets of three partial differential equations for both contra-flow and cross-flow are established, and form the bases from which a range of methods of direct-sizing and stepwise rating may proceed. Optimisation of an exchanger for steady-state operation is achieved by an approach which allows maximum utilisation of the allowable pressure losses. Transient methods are covered, including the Method of Characteristics, and the Single-Blow method of testing is treated. Numerous aspects of low and high temperature design are discussed, and extensive references to the literature are provided. Schematic algorithms are listed to allow students and practitioners to construct their own solutions, and spline-fitting of data is discussed.

Download or read book Advanced Analytic and Control Techniques for Thermal Systems with Heat Exchangers written by Libor Pekar and published by Academic Press. This book was released on 2020-07-10 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Analytic Control Techniques for Thermal Systems with Heat Exchangers presents the latest research on sophisticated analytic and control techniques specific for Heat Exchangers (HXs) and heat Exchanger Networks (HXNs), such as Stability Analysis, Efficiency of HXs, Fouling Effect, Delay Phenomenon, Robust Control, Algebraic Control, Geometric Control, Optimal Control, Fuzzy Control and Artificial Intelligence techniques. Editor Libor Pekar and his team of global expert contributors combine their knowledge and experience of investigated and applied systems and processes in this thorough review of the most advanced networks, analyzing their dynamics, efficiency, transient features, physical properties, performance, feasibility, flexibility and controllability. The structural and dynamic analyses and control approaches of HXNs, as well as energy efficient manipulation techniques are discussed, in addition to the design of the control systems through the full life cycle. This equips the reader with an understanding of the relevant theory in a variety of settings and scenarios and the confidence to apply that knowledge to solve problems in an academic or professional setting.Graduate students and early-mid career professionals require a robust understanding of how to suitably design thermal systems with HXs and HXNs to achieve required performance levels, which this book offers in one consolidated reference. All examples and solved problems included have been tried and tested, and these combined with the research driven theory provides professionals, researchers and students with the most recent techniques to maximize the energy efficiency and sustainability of existing and new thermal power systems. - Analyses several advanced techniques, the theoretical background of these techniques and includes models, examples and results throughout - Focusses on advanced analytic and control techniques which have been investigated or applied to thermal systems with HXs and HXNs - Includes practical applications and advanced ideas from leading experts in the field, as well as case studies and tested problems and solutions

Download or read book Design and Operation of Heat Exchangers and their Networks written by Wilfried Roetzel and published by Academic Press. This book was released on 2019-10-04 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Operation of heat Exchangers and Their Networks presents a comprehensive and detailed analysis on the thermal design methods for the most common types of heat exchangers, with a focus on their networks, simulation procedures for their operations, and measurement of their thermal performances. The book addresses the fundamental theories and principles of heat transfer performance of heat exchangers and their applications and then applies them to the use of modern computing technology. Topics discussed include cell methods for condensers and evaporators, dispersion models for heat exchangers, experimental methods for the evaluation of heat exchanger performance, and thermal calculation algorithms for multi-stream heat exchangers and heat exchanger networks. - Includes MATLAB codes to illustrate how the technologies and methods discussed can be easily applied and developed - Analyses a range of different models, applications, and case studies in order to reveal more advanced solutions for industrial applications - Maintains a strong focus on the fundamental theories and principles of the heat transfer performance of heat exchangers and their applications for complex flow arrangement

Download or read book Fundamentals of Heat Exchanger Design written by Ramesh K. Shah and published by John Wiley & Sons. This book was released on 2003-08-11 with total page 978 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive and unique source integrates the material usually distributed among a half a dozen sources. * Presents a unified approach to modeling of new designs and develops the skills for complex engineering analysis. * Provides industrial insight to the applications of the basic theory developed.

Download or read book Heat Exchanger Design Handbook Second Edition written by Kuppan Thulukkanam and published by CRC Press. This book was released on 2013-05-20 with total page 1275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely revised and updated to reflect current advances in heat exchanger technology, Heat Exchanger Design Handbook, Second Edition includes enhanced figures and thermal effectiveness charts, tables, new chapter, and additional topics––all while keeping the qualities that made the first edition a centerpiece of information for practicing engineers, research, engineers, academicians, designers, and manufacturers involved in heat exchange between two or more fluids. See What’s New in the Second Edition: Updated information on pressure vessel codes, manufacturer’s association standards A new chapter on heat exchanger installation, operation, and maintenance practices Classification chapter now includes coverage of scrapped surface-, graphite-, coil wound-, microscale-, and printed circuit heat exchangers Thorough revision of fabrication of shell and tube heat exchangers, heat transfer augmentation methods, fouling control concepts and inclusion of recent advances in PHEs New topics like EMbaffle®, Helixchanger®, and Twistedtube® heat exchanger, feedwater heater, steam surface condenser, rotary regenerators for HVAC applications, CAB brazing and cupro-braze radiators Without proper heat exchanger design, efficiency of cooling/heating system of plants and machineries, industrial processes and energy system can be compromised, and energy wasted. This thoroughly revised handbook offers comprehensive coverage of single-phase heat exchangers—selection, thermal design, mechanical design, corrosion and fouling, FIV, material selection and their fabrication issues, fabrication of heat exchangers, operation, and maintenance of heat exchangers —all in one volume.

Download or read book Plate Heat Exchangers written by Bengt Sundén and published by WIT Press. This book was released on 2007 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plate-and-frame heat exchangers (PHEs) are used in many different processes at a broad range of temperatures and with a variety of substances. Research into PHEs has increased considerably in recent years and this is a compilation of knowledge on the subject. Containing invited contributions from prominent and active investigators in the area, it should enable graduate students, researchers, and research and development engineers in industry to achieve a better understanding of transport processes. Some guidelines for design and development are also included.

Download or read book Compact Heat Exchangers written by J.E. Hesselgreaves and published by Elsevier. This book was released on 2001-05-08 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the ideas and industrial concepts in compact heat exchanger technology that have been developed in the last 10 years or so. Historically, the development and application of compact heat exchangers and their surfaces has taken place in a piecemeal fashion in a number of rather unrelated areas, principally those of the automotive and prime mover, aerospace, cryogenic and refrigeration sectors. Much detailed technology, familiar in one sector, progressed only slowly over the boundary into another sector. This compartmentalisation was a feature both of the user industries themselves, and also of the supplier, or manufacturing industries. These barriers are now breaking down, with valuable cross-fertilisation taking place. One of the industrial sectors that is waking up to the challenges of compact heat exchangers is that broadly defined as the process sector. If there is a bias in the book, it is towards this sector. Here, in many cases, the technical challenges are severe, since high pressures and temperatures are often involved, and working fluids can be corrosive, reactive or toxic. The opportunities, however, are correspondingly high, since compacts can offer a combination of lower capital or installed cost, lower temperature differences (and hence running costs), and lower inventory. In some cases they give the opportunity for a radical re-think of the process design, by the introduction of process intensification (PI) concepts such as combining process elements in one unit. An example of this is reaction and heat exchange, which offers, among other advantages, significantly lower by-product production.To stimulate future research, the author includes coverage of hitherto neglected approaches, such as that of the Second Law (of Thermodynamics), pioneered by Bejan and co- workers. The justification for this is that there is increasing interest in life-cycle and sustainable approaches to industrial activity as a whole, often involving exergy (Second Law) analysis. Heat exchangers, being fundamental components of energy and process systems, are both savers and spenders of exergy, according to interpretation.

Download or read book Advanced Heat Transfer written by Greg F. Naterer and published by CRC Press. This book was released on 2018-05-03 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Heat Transfer, Second Edition provides a comprehensive presentation of intermediate and advanced heat transfer, and a unified treatment including both single and multiphase systems. It provides a fresh perspective, with coverage of new emerging fields within heat transfer, such as solar energy and cooling of microelectronics. Conductive, radiative and convective modes of heat transfer are presented, as are phase change modes. Using the latest solutions methods, the text is ideal for the range of engineering majors taking a second-level heat transfer course/module, which enables them to succeed in later coursework in energy systems, combustion, and chemical reaction engineering.

Download or read book Heat Exchangers written by S. M. Sohel Murshed and published by BoD – Books on Demand. This book was released on 2017-04-27 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting contributions from renowned experts in the field, this book covers research and development in fundamental areas of heat exchangers, which include: design and theoretical development, experiments, numerical modeling and simulations. This book is intended to be a useful reference source and guide to researchers, postgraduate students, and engineers in the fields of heat exchangers, cooling, and thermal management.

Download or read book Process Heat Transfer written by Robert W. Serth and published by Academic Press. This book was released on 2014-01-27 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Heat Transfer is a reference on the design and implementation of industrial heat exchangers. It provides the background needed to understand and master the commercial software packages used by professional engineers in the design and analysis of heat exchangers. This book focuses on types of heat exchangers most widely used by industry: shell-and-tube exchangers (including condensers, reboilers and vaporizers), air-cooled heat exchangers and double-pipe (hairpin) exchangers. It provides a substantial introduction to the design of heat exchanger networks using pinch technology, the most efficient strategy used to achieve optimal recovery of heat in industrial processes. - Utilizes leading commercial software. Get expert HTRI Xchanger Suite guidance, tips and tricks previously available via high cost professional training sessions. - Details the development of initial configuration for a heat exchanger and how to systematically modify it to obtain an efficient final design. - Abundant case studies and rules of thumb, along with copious software examples, provide a complete library of reference designs and heuristics for readers to base their own designs on.

Download or read book Advances in Design Modelling and Applications of Heat Transfer Equipment written by Zdeněk Jegla and published by . This book was released on 2020-09-16 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat-transfer equipment, typically represented by, for example, heat exchangers, process furnaces, and steam boilers, is among the essential equipment used for production processes in a number of industries (e.g., chemical and petrochemical, food, pharmaceutical, power, aviation and space) as well as for processes and applications in the communal sphere (e.g., waste incineration plants, heating plants, laundries, hospitals, server rooms, agriculture applications). Increasing demands for economical and efficient heat energy management can only be met when not only the layout of the whole system but also the individual heat-transfer equipment and its details are designed according to state-of-the-art knowledge. The purpose of this Special Issue is to present the latest advances in designing, modeling, testing, and operating heat-transfer equipment, including unconventional and innovative designs of heat-transfer equipment and their applications.

Download or read book Compact Heat Exchangers written by C. Ranganayakulu and published by John Wiley & Sons. This book was released on 2018-04-30 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive source of generalized design data for most widely used fin surfaces in CHEs Compact Heat Exchanger Analysis, Design and Optimization: FEM and CFD Approach brings new concepts of design data generation numerically (which is more cost effective than generic design data) and can be used by design and practicing engineers more effectively. The numerical methods/techniques are introduced for estimation of performance deteriorations like flow non-uniformity, temperature non-uniformity, and longitudinal heat conduction effects using FEM in CHE unit level and Colburn j factors and Fanning friction f factors data generation method for various types of CHE fins using CFD. In addition, worked examples for single and two-phase flow CHEs are provided and the complete qualification tests are given for CHEs use in aerospace applications. Chapters cover: Basic Heat Transfer; Compact Heat Exchangers; Fundamentals of Finite Element and Finite Volume Methods; Finite Element Analysis of Compact Heat Exchangers; Generation of Design Data by CFD Analysis; Thermal and Mechanical Design of Compact Heat Exchanger; and Manufacturing and Qualification Testing of Compact Heat Exchanger. Provides complete information about basic design of Compact Heat Exchangers Design and data generation is based on numerical techniques such as FEM and CFD methods rather than experimental or analytical ones Intricate design aspects included, covering complete cycle of design, manufacturing, and qualification of a Compact Heat Exchanger Appendices on basic essential fluid properties, metal characteristics, and derivation of Fourier series mathematical equation Compact Heat Exchanger Analysis, Design and Optimization: FEM and CFD Approach is ideal for senior undergraduate and graduate students studying equipment design and heat exchanger design.

Download or read book Heat Exchanger Design written by Arthur P. Fraas and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Second Edition of the well-received work on design, construction, and operation of heat exchangers. Demonstrates how to apply theories of fluid mechanics and heat transfer to practical problems posed by design, testing, and installation of heat exchangers. Tables and data have been brought up to date, and there is new material on problems of vibration and fouling, and on optimization of energy use in the chemical process and manufacturing industries. Covers all basic principles of heat exchanger design, and addresses many specialized situations encountered in engineering applications.

Download or read book Heat Transfer Equipment Design written by R. K. Shah and published by CRC Press. This book was released on 1988-07-01 with total page 1104 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Innovative Heat Exchangers written by Hans-Jörg Bart and published by Springer. This book was released on 2017-12-30 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This accessible book presents unconventional technologies in heat exchanger design that have the capacity to provide solutions to major concerns within the process and power-generating industries. Demonstrating the advantages and limits of these innovative heat exchangers, it also discusses micro- and nanostructure surfaces and micro-scale equipment, and introduces pillow-plate, helical and expanded metal baffle concepts. It offers step-by-step worked examples, which provide instructions for developing an initial configuration and are supported by clear, detailed drawings and pictures. Various types of heat exchangers are available, and they are widely used in all fields of industry for cooling or heating purposes, including in combustion engines. The market in 2012 was estimated to be U$ 42.7 billion and the global demand for heat exchangers is experiencing an annual growth of about 7.8 %. The market value is expected to reach U$ 57.9 billion in 2016, and approach U$ 78.16 billion in 2020. Providing a valuable introduction to students and researchers, this book offers clear and concise information to thermal engineers, mechanical engineers, process engineers and heat exchanger specialists.

Download or read book Advances in Industrial Heat Transfer written by Alina Adriana Minea and published by CRC Press. This book was released on 2012-10-02 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Industrial Heat Transfer presents the basic principles of industrial heat transfer enhancement. Serving as a reference and guide for future research, this book presents a complete approach, from redesigning equipment to the use of nanofluids in industry.Based on the latest methods of the experiment and their interpretation, this book pr